General Discussion Forum

Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

New Topic

23202 topics

Page 1 of 233
- Jump to page:
1
2
3
4
5
…
233
Next

Announcements

Replies

Views

Last post

Announcement - All Support questions have been moved here

Last post by AdminJeff « Mon Jan 28, 2019 11:47 am

by AdminJeff » Mon Jan 28, 2019 11:47 am

In the ongoing quest of reducing forum clutter and keeping the topics relevant to the Model T in the Model T forum, this is the new place to ask for all help on the Forums.

Can’t log in? Want to test posting pics without causing clutter here? You don’t have to have a userid to post, and you don’t even have to give your info, just post away and...

0 Replies

28251 Views

Last post by AdminJeff
Mon Jan 28, 2019 11:47 am

Topics

Replies

Views

Last post

Nice ‘14

Last post by Dollisdad « Sat Feb 14, 2026 2:01 pm
Replies: 3
by Dollisdad » Sat Feb 14, 2026 1:58 pm

First post

IMG_5144.jpeg IMG_5110.jpeg IMG_5175.jpeg IMG_5117.jpeg

Last post

IMG_4965.jpeg IMG_5165.jpeg IMG_5173.jpeg IMG_4308.jpeg

3 Replies

6 Views

Last post by Dollisdad
Sat Feb 14, 2026 2:01 pm
Got to work on a T today

Last post by KWTownsend « Sat Feb 14, 2026 1:52 pm
Replies: 6
by Jacob Mangold » Fri Feb 13, 2026 8:48 pm

First post

For those who don’t know, I am currently employed at a hot rod shop at the age of 17. I do a lot of different varieties of cars from muscle cars to luxury European to full on custom street rods. Well today I got to work on what I believe is a 1914 speedster. At my shop, no one knows much about T’s so I got to run the show on this one. The car...

Last post

Atta boy!
A little knowledge is a good thing.
A lot of knowledge is even better!

: ^ )

6 Replies

210 Views

Last post by KWTownsend
Sat Feb 14, 2026 1:52 pm
Also posting here because no one reads the services forum

Last post by Gen3AntiqueAuto « Sat Feb 14, 2026 1:37 pm

by Gen3AntiqueAuto » Sat Feb 14, 2026 1:37 pm

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

0 Replies

12 Views

Last post by Gen3AntiqueAuto
Sat Feb 14, 2026 1:37 pm
1914 tail lamp bracket

Last post by Art Ebeling « Sat Feb 14, 2026 12:37 pm

by Art Ebeling » Sat Feb 14, 2026 12:37 pm

My 14 Runabout has a taillamp bracket with vertical mounting holes but the vendors show them with horizontal holes. Which is correct? Thanks, Art

0 Replies

21 Views

Last post by Art Ebeling
Sat Feb 14, 2026 12:37 pm
Valve replacement - 26-27 block

Last post by Mark Gregush « Sat Feb 14, 2026 12:31 pm
Replies: 25
by fireheadman » Sun Feb 08, 2026 8:05 pm

First post

Couldn't locate anything using the forum search for my concerns...
Was looking for some pictures (and guidance) of other's T's showing valves properly seated and without head installed.

On the last start up, I noticed coolant bubbling out from the rear head and knew I needed to replace the head gasket.
Today I got the head removed, spent an hour...

Last post

Didn't see this on a read through, 26/27 blocks are known to crack in the valve chamber area. Valve stem bosses up into the ports. This is another place to check for cracks.
Ya on the can o worms! My 25 had a very loud clunk in the drive plate area but ran good cast iron pistons and all but needed a complete rebuild. The pins in the push plate...

25 Replies

853 Views

Last post by Mark Gregush
Sat Feb 14, 2026 12:31 pm
Another Perspective on Coil Tuning

Last post by TXGOAT2 « Sat Feb 14, 2026 12:21 pm
Replies: 4
by MKossor » Fri Feb 13, 2026 10:25 pm

First post

MS Test WRT Piston Position.jpg

Last post

I don't believe that's in dispute.

4 Replies

170 Views

Last post by TXGOAT2
Sat Feb 14, 2026 12:21 pm
What is the purpose for this choke arm attachment?

Last post by Original Smith « Sat Feb 14, 2026 11:52 am
Replies: 3
by Corey Walker » Thu Feb 12, 2026 1:05 am

First post

This wheel/star with 6 holes is attached to the original choke arm where the wire goes. What is its purpose? It doesn’t spin, it has raised areas that lock it in place.

Last post

Interesting piece!

3 Replies

333 Views

Last post by Original Smith
Sat Feb 14, 2026 11:52 am
Oval headed tubular rivets.

Last post by jiminbartow « Sat Feb 14, 2026 11:26 am
Replies: 2
by jiminbartow » Fri Feb 13, 2026 9:50 pm

First post

Does anyone have a good source for nickel or chrome plated brass or steel oval headed (not full round headed but shallow round headed) tubular rivets of various small sizes. Also in stainless steel. Thank you.

Last post

Perfect! Thank you Dan.

2 Replies

127 Views

Last post by jiminbartow
Sat Feb 14, 2026 11:26 am
New Guy Could use some help

Last post by Scott C. « Sat Feb 14, 2026 11:21 am
Replies: 8
by bkhiatt » Thu Feb 12, 2026 11:49 pm

First post

Hi All,
Long time lurker, reader, and researcher, first time poster

I've been doing the Model A thing for almost 20 years with a 1928 Phaeton and 1931 CCPU so I thought I had ol' Henry figured out, but the Model T seems to be a different beast.

I am working on a what I thought was a 1923 Model T Roadster (with the wooden pickup bed accessory...

Last post

If your replacement floorboards are to narrow and the pedal spacing is wrong. It sounds like you have a 26-27 and not a 23. 26-27 s have wider floorboards and they have a door on both sides.

8 Replies

380 Views

Last post by Scott C.
Sat Feb 14, 2026 11:21 am
Ringing gas cap with wood float.

Last post by Scott_Conger « Sat Feb 14, 2026 11:12 am
Replies: 6
by WorldChamp1914 » Fri Feb 13, 2026 9:27 pm

First post

Has anyone ever used one of these? Did the wood float hold up with the ethanol in the gas? IMG_7475.jpeg

Last post

it is not intended to float

it is intended at best, to be neutrally buoyant while retaining mass/weight enough to tug the release open when no longer suspended in fuel

6 Replies

198 Views

Last post by Scott_Conger
Sat Feb 14, 2026 11:12 am
Model T’s for WW2 scrap drive?

Last post by BobD « Sat Feb 14, 2026 10:48 am
Replies: 5
by John kuehn » Fri Feb 13, 2026 7:13 pm

First post

Was this a scrap drive or just a wrecking yard over run with T’s getting ready for the scrapper. I think I’ve seen this before but can’t remember where. I’m thinking it’s in the early 40’s or before. Looks like it was few other makes too but not many.

Last post

Screenshot 2026-02-14 at 8.47.02 AM.JPG

Description: Crane lifts car onto enormous pile of wrecked cars, mostly Model T vintage. Tires and parts missing from some cars, but most look whole and intact. Crane is run by Smith Brothers Truck Company of Los Angeles.

Date ca. 1920

5 Replies

295 Views

Last post by BobD
Sat Feb 14, 2026 10:48 am
Duncan,Ok. swapmeet

Last post by VinTin23 « Sat Feb 14, 2026 6:17 am
Replies: 12
by Gene_French » Sun Jan 18, 2026 12:05 pm

First post

it is getting to be time to start planning our springtime auto. activities ... i spoke with Kevin Hammock this week regarding any changes in the Duncan swapmeet in March ... the only change is BIGGER ... the 2 north buildings are sold out and the building that was under construction last year is completed and will house an additional 100 plus...

Last post

In the pre-war section, are the spots large enough to set up display and park your truck. I won’t have a trailer but will have few things that are heavy and would like to display off the back of truck.

12 Replies

1382 Views

Last post by VinTin23
Sat Feb 14, 2026 6:17 am
New here and an Introduction

Last post by Duey_C « Sat Feb 14, 2026 1:13 am
Replies: 41
by Tharper » Thu Jan 22, 2026 2:15 pm

First post

Good afternoon,

I am new to the wonderful world of the Model T. A little background: I have been involved with the Maine Forest & Logging Museum in Bradley, Maine, for quite a few years now. Back in December, we received a generous donation of two Ford Model TT trucks with Virgil White snowmobile conversions. Needless to say, we are pretty...

Last post

Excellent yet tragic story Wayne!
IF I understand, boiler pressure relief valves were far easier to fiddle with back then.

41 Replies

2155 Views

Last post by Duey_C
Sat Feb 14, 2026 1:13 am
26-27 T roadster pickup for sale ; not mine

Last post by OilyBill « Sat Feb 14, 2026 12:08 am
Replies: 4
by ModelTWoods » Tue Feb 10, 2026 1:06 pm

First post

I just saw a 26-27 T roadster pickup for sale in Longview, Texas by a salvage yard on Facebook marketplace. Price $2500.00. Ad states no title, no motor or transmission, and I do not see top irons or bows. Picture is not a close up, but it doesn't look like a rust bucket and fenders don't look all bent up.

Last post

Thanks very much for the link! I found it through that.

4 Replies

496 Views

Last post by OilyBill
Sat Feb 14, 2026 12:08 am
Crankshaft Endplay

Last post by Mike Silbert « Fri Feb 13, 2026 10:05 pm
Replies: 17
by CatGuy » Thu Feb 12, 2026 6:09 pm

First post

I’m looking into why the magneto isn’t working on my ‘26. I’ve checked the post and it was fine. I just now checked the endplay and it seemed fairly significant to me. It’s an exaggeration, but I would say it’s nearly 1/8”. That’s just a guess. The black book talks about an oversized bearing endcap. Do they still make those? Lang’s only shows a...

Last post

Not all Model T's are wired the same
See

and I use

Everyone has their favorite drawing and accessories are custom wired.
I'm sure others will send their favorite wiring diagrams also.
Mike

17 Replies

427 Views

Last post by Mike Silbert
Fri Feb 13, 2026 10:05 pm
Tracking down a 1916 Model T

Last post by WarbirdPhotog « Fri Feb 13, 2026 8:36 pm
Replies: 83
by WarbirdPhotog » Tue Jul 29, 2025 7:24 pm

First post

Hello all! Just signed up on the forums here. I'm hunting for a 1916 Ford Model T Touring Car that used to be owned by my grandfather, Richard C Dietz. Back in 2012, my grandfather passed away. My grandmother sold the Model T in a panic shortly after. It was originally supposed to be handed down to my father.

For the last few years, I've been...

Last post

Do these folks have a mailing address? If you can find that drive over and knock on their door.

Yes, and no... I've mailed letters to the two addresses I've found via internet searches. However, I'm not sure if they 1) are the right person and 2) actually live there. It's quite a drive from here to get up there, so I'd rather be a bit more...

83 Replies

10774 Views

Last post by WarbirdPhotog
Fri Feb 13, 2026 8:36 pm
Early classic car collection in Micminnvile OR

Last post by KWTownsend « Fri Feb 13, 2026 4:53 pm
Replies: 2
by KimDobbins » Fri Feb 13, 2026 7:26 am

First post

I've heard that there is a large collection of early classic cars including some very early Fords in Micminnville, OR. Does anyone know the owner and contact info?

Last post

Information sent.

2 Replies

386 Views

Last post by KWTownsend
Fri Feb 13, 2026 4:53 pm
How to repair this

Last post by Shrshot « Fri Feb 13, 2026 2:18 pm
Replies: 14
by Dave1 » Thu Feb 12, 2026 1:55 pm

First post

My 27 touring has a crack / bend in the the lower section of the the front bow. Wondering is I should attempt to repair on the car?
I have a lathe so I could cut it off at the break and make a dowel to fit inside, then braze up the joint.
Anybody tried this repair?

Last post

If you have access to someone with a TIG welding machine that can be repaired on the car. If you were close I would do it for you. I have a Miller Sychro-Wave SD welder. TIG welding does not produce any spatter, so no worries to surrounding area. That's not a difficult repair in the right hands.

14 Replies

668 Views

Last post by Shrshot
Fri Feb 13, 2026 2:18 pm
Binding Clutch?

Last post by TXGOAT2 « Fri Feb 13, 2026 12:23 pm
Replies: 10
by VinTin23 » Fri Feb 13, 2026 5:54 am

First post

I have a 22 T with a 26/27 Engine & Transmission. Has Ruckstell & large drum RMB installed. Engine starts right up and is strong, but The car has always struggled to move. Low & reverse needed high rpm and often will stall, especially in reverse.

I’ve had the car since 2020, prior owner had it for well over 30 years, spent a lot of time outside...

Last post

This car appears to have sat in storage for a long period of time. Has ALL old gasoline been drained from the tank in the last month or two and replaced with fresh gasoline? Has the carburetor been drained or cleaned recently? What about the gas screen? Have you checked for dirt dauber nests in the carburetor and exhaust? The fact that the engine...

10 Replies

254 Views

Last post by TXGOAT2
Fri Feb 13, 2026 12:23 pm
parts book

Last post by Art Ebeling « Thu Feb 12, 2026 10:04 pm
Replies: 6
by Art Ebeling » Wed Feb 11, 2026 8:02 pm

First post

I'm having a brain cramp, what book lists the various bolt sizes used on a Model T chassis and body? Thanks, Art

Last post

Thank you to all of you guys. These answers are what I needed. I appriciate the help. Art

6 Replies

328 Views

Last post by Art Ebeling
Thu Feb 12, 2026 10:04 pm
Ruckstell won’t shifter

Last post by Harvey Bergstrom « Thu Feb 12, 2026 6:36 pm
Replies: 8
by Harvey Bergstrom » Wed Feb 11, 2026 8:04 pm

First post

Hi everyone,
Just completed going through the entire Ruckstell in a ,26 Tudor that also has a Warford transmission. Having both I thought it a good idea to install the hydraulic disc brakes which I just finished today. Got everything put back together and started the engine to make sure the Warford shifted correctly which it did, however I could...

Last post

Hello everyone,
After reading all the responses and thinking back at what I had done, I went out to my shop and carefully unbolted the shifter and pulled it out slowly while trying to see where the fork was in relation to the collar groove. Sure enough! The fork was on the right side of the collar groove. No wonder I only had one gear. Works now...

8 Replies

340 Views

Last post by Harvey Bergstrom
Thu Feb 12, 2026 6:36 pm
Line bore info

Last post by Karl Von Neumann « Thu Feb 12, 2026 4:22 pm
Replies: 3
by Karl Von Neumann » Mon Feb 09, 2026 3:22 pm

First post

Cab anyone with a hempy cooper line boring set up take some measurements and pictures of the cutters for me mine are missing

Last post

Move to top still looking

3 Replies

339 Views

Last post by Karl Von Neumann
Thu Feb 12, 2026 4:22 pm
Problem fitting standard adjustable lifters

Last post by BRENT in 10-uh-C « Thu Feb 12, 2026 4:08 pm
Replies: 7
by 1915ford » Wed Feb 11, 2026 10:29 pm

First post

Doing a full rebuild on my 22 centerdoor engine. Everything shows minimal wear so i ordered standard adjustable lifters. The problem is they wont go into the block. They seem to be one or two thousandths too big. Suggestions? Is there a reamer out there that would work for this?

Last post

Mark, see if a local machine shop can hone the lifter bores for you instead of reaming.

It has been my experiences that most chucking reamers need a minimum of about 2% of the diameter (-in this scenario about 8 thousandths) to keep the flutes loaded during the cutting process. Otherwise, you generally get chatter marks in the bore finish which...

7 Replies

316 Views

Last post by BRENT in 10-uh-C
Thu Feb 12, 2026 4:08 pm
R V Anderson's Watts style clutch.

Last post by Rich P. Bingham « Thu Feb 12, 2026 11:25 am
Replies: 11
by RGould1910 » Tue Feb 10, 2026 3:14 pm

First post

Some years back RV Anderson reproduced a Watts style clutch. The price of the original material skyrocket and he used a ditterent material and asked some who purchased the kit to critique it. I have a 26-27 set up but am reluctant to install it fearing it wont work well. If anyone has experience with this clutch, good or bad, I'd like to hear from...

Last post

Thanks, Steve. Makes sense.

11 Replies

598 Views

Last post by Rich P. Bingham
Thu Feb 12, 2026 11:25 am
What have you done to your Model T in February '26

Last post by love2T's « Thu Feb 12, 2026 11:23 am
Replies: 14
by varmint » Fri Feb 06, 2026 8:14 pm

First post

Removed mosquitoes.

smoked.jpg

Last post

Today we hung the front fenders on our 27 Sport Touring.
It’s starting to look like a car!

Wow that's a nice paint job! Info regarding it?

14 Replies

770 Views

Last post by love2T's
Thu Feb 12, 2026 11:23 am
Tires

Last post by speedytinc « Thu Feb 12, 2026 11:15 am
Replies: 3
by Darren J » Thu Feb 12, 2026 10:00 am

First post

Do you guys have a source for 21 tires other than Lang's or Snyders? Just curios if I'm missing something. I'm pretty happy with the results of my wheels and I just can't bring myself to put the old whitewalls back on. I have Kelsey split rims and only 1 of them is good. I saw a guy sell his rims and tires here but missed it dang it ;-)

Just...

Last post

Check with summit racing. They had a great deal on 21's. Firestones. Free shipping & no sales tax.
Take into account the total, to your door cost.

3 Replies

180 Views

Last post by speedytinc
Thu Feb 12, 2026 11:15 am
very original Town Car in great condition.

Last post by Luxford « Thu Feb 12, 2026 12:20 am
Replies: 6
by Luxford » Wed Feb 11, 2026 5:51 am

First post

I'm surprised no one has mentioned the 1911/12 Town Car which is on facebook. This vehicle is in excellent original condition and must have been stored in a very friendly envionment for over 100 years. Their was a video showing the outside and inside which is remarkable condition it has since been deleted My Town Car is very close to this vehicle...

Last post

If you go to the facebook site and click on the available links you can see more photo's of the Town Car as well as other Model T's.
There is obviously a keen Model T Ford group in Uruguay who have numerous Model T's they have collected, including some unusual local bodied T's. I'm surprised the existance of this group has not been more...

6 Replies

708 Views

Last post by Luxford
Thu Feb 12, 2026 12:20 am
Getting Rattles Back On The Road

Last post by Mopar_man « Wed Feb 11, 2026 11:22 pm
Replies: 655
by Mopar_man » Sat Jan 04, 2020 6:34 pm
1

…

3

4

5

6

7
First post

So about 3 and a half years ago my wife found a 1926 Touring for sale in the local paper. I went to look at the car and bought it. The guy showed me a video of the car running form the previous year. He said the the Clutch was stuck and that was why the rear wheel was now not moving. As I took a better look at it when I got it home I found that...

Last post

Should the bushing go that deep into the bracket? If so, you may get a better fit on non worn section of the shaft closer to the pitman arm by fitting the bush flush with the end of the bracket. Either that or using a longer bush.

Allan from down under.

I'm thinking no. Shouldn't be that deep. The bracket is worn from not having a bushing in...
655 Replies

374153 Views

Last post by Mopar_man
Wed Feb 11, 2026 11:22 pm
Roof Heads Value

Last post by Ujustwaite « Wed Feb 11, 2026 9:18 pm
Replies: 6
by MossPointMachine » Fri Apr 28, 2023 6:34 pm

First post

I have a 16 valve Roof, believe it’s a model A with oval exhaust ports and two 8 valve Roofs, one has a single intake port and the other has two intake ports. Would like to know what they may be worth? They have all had some repairs done, the dual intake 8 valve may not be useable. I think the 16 valve and single port 8 valve are useable. Please...

Last post

Sorry for the fast reply. Wanted to get on the thread! I sent an email. Hope we can connect.

6 Replies

1393 Views

Last post by Ujustwaite
Wed Feb 11, 2026 9:18 pm
Help identifying this radiator shell

Last post by Mighty1924 « Wed Feb 11, 2026 8:44 pm
Replies: 9
by Mighty1924 » Wed Feb 11, 2026 12:26 pm

First post

Need some help!!
Anyone have a idea who made this radiator shell?
Picked up at a auction and would like to know more about it
Thanks for any help
Rick.

Last post

Thank you for all the responses.
Now I know what I'm have.
Now the hunt for the badge to go in the shell.
Thanks Rick

9 Replies

394 Views

Last post by Mighty1924
Wed Feb 11, 2026 8:44 pm
Anti seize axle hub tapers

Last post by Allan « Wed Feb 11, 2026 5:40 pm
Replies: 8
by Harvey Bergstrom » Mon Feb 09, 2026 8:18 pm

First post

Hi everyone,
I just finished installing new axle shafts in a Ruckstell differential and I’m wondering if I did right to use anti seize on the tapers. Evidently there has been some debate on the matter. I also installed new hubs. Any thoughts appreciated!

Last post

Harvey, it is a good idea to re-torque the axle nut after driving the car a bit. I always leave the hubcap off after pulling a wheel to reminds me to do the re-torque.

Allan from down under.

8 Replies

513 Views

Last post by Allan
Wed Feb 11, 2026 5:40 pm
Glass Headlight Reflectors

Last post by Allan « Wed Feb 11, 2026 5:34 pm
Replies: 5
by Original Smith » Sun Feb 08, 2026 3:14 pm

First post

I have two glass spare headlight reflectors. They are both the same diameter, but one is thicker and heavier than the other. Since the headlights are John Brown, I would assume the lighter one would be what was used. I'm not willing to remove the reflectors from either one of my '13s to find out!

Last post

I hear you Rich. I gave up trying to get a perfectly matched pair.

Allan from down under.

5 Replies

504 Views

Last post by Allan
Wed Feb 11, 2026 5:34 pm
Water in the Oil

Last post by Allan « Wed Feb 11, 2026 5:30 pm
Replies: 36
by John_Aldrich » Sat Jan 10, 2026 5:30 pm

First post

NOT good.
Pulled the engine to put a rebuilt transmission on.

Put the car back together and when I checked the oil prior to starting the car it had oil in it (I installed a dipstick years ago).

Changed the oil and pulled the head thinking I had a blown head gasket. Replaced the head gasket (didn't really look bad) and reassembled.

Started the...

Last post

A customer for whom I rebuilt a short motor installed a Z head himself, with washers as required., and stripped two bolts doing so. I supplied him with replacement bolts form a GM 6 cylinder Holden motor. These are over length, have rolled threads and necked down shanks which are handy in alloy heads. I advised him to clean out all the bolt holes...

36 Replies

1667 Views

Last post by Allan
Wed Feb 11, 2026 5:30 pm
Removing front seat cushion 27 touring

Last post by Mopar_man « Wed Feb 11, 2026 12:21 pm
Replies: 4
by Dave1 » Tue Feb 10, 2026 6:18 pm

First post

How does one remove the front seat cushion ( back) on a 27 touring?
This one was recently re upholstered, looks like the covering is stapled in place, if so does this require pulling all the staples and then replacing them?

Last post

Take a look at my thread Getting Rattles back on the road. I have the complete upholstery job on a 26 Touring.

4 Replies

235 Views

Last post by Mopar_man
Wed Feb 11, 2026 12:21 pm
I'm stumped. Any Transmission guys here?

Last post by Darren J « Wed Feb 11, 2026 9:44 am
Replies: 9
by Darren J » Tue Feb 10, 2026 4:55 pm

First post

Hey guys I need more advice. 1926 Coupe here.

Problem:

So I have new triple gear bushings with 10 Thousands thrust.
The driven gear is pressed flush with the brake drum shaft.
New transmission shaft from Lang's.
Trans shaft installed as far as it will go and torqued to spec.
When I took it apart it had the three thrust washers for the clutch...

Last post

Thanks guys for all the advice I’ll keep on it

Darren

9 Replies

517 Views

Last post by Darren J
Wed Feb 11, 2026 9:44 am
NEW 21” TIRES

Last post by jiminbartow « Tue Feb 10, 2026 9:25 pm
Replies: 16
by Dave Young » Sun Feb 08, 2026 11:09 am

First post

I’m ready to put new sneakers on my ‘26 split rims and am considering going with 5.25-21. My engine is strong and I do have a Rux in this pickup. I like the idea of the slightly larger diameter tires giving me a little lower rpm at the same cruise speed. What have others experienced? Also, what’s the current opinion of the various brands that are...

Last post

In 2022, I replaced my 52 year old, 21” “Universal” tires, tubes and flaps (purchased from Mark Auto in 1970) on my 1926 coupe with (5) new 21” “Goodyear” tires, tubes and flaps and they are superb. I could not be happier with them. Good luck.

PS. Increasing the diameter of the tire will throw off your speedometer (if you have one). I have a...

16 Replies

669 Views

Last post by jiminbartow
Tue Feb 10, 2026 9:25 pm
Removing a battery from a 1927 roadster

Last post by Allan « Tue Feb 10, 2026 6:15 pm
Replies: 32
by RGould1910 » Wed Feb 04, 2026 9:08 am

First post

Is there an easy way to remove the battery from a 27 roadster? I'm thinking about getting a running board battery box like you see on TTs to allow easier access in the future. Pro's and cons?

Last post

Both threads Mike referred to are incomplete in their contribution.
When a battery box lid is used The hold down clamps hold the cover down on the two flats either side of the lid. The battery can be free to float around in the box under the lid. This is especially true with the lower height batteries available today. In T times the wooden case of...

32 Replies

1204 Views

Last post by Allan
Tue Feb 10, 2026 6:15 pm
EZ Turn expiration date???

Last post by OilyBill « Tue Feb 10, 2026 5:18 pm
Replies: 13
by DHort » Sat Feb 07, 2026 8:27 pm

First post

Does this date really mean anything for a Model T or is it only because it is used on aircraft?
Why does it expire? Looks like vaseline in a tube.
Thank you.

Last post

I worked at an aircraft service center for a manufacturer, and started seeing Expiration Dates of 1 year on Loc-Tite products. I called Loc-Tite, and they told me: Loc-Tite products NEVER expire! If they are still liquid, then they are fine to use! They wanted to know WHO PUT the expiration date on their products, and when I investigated, I found...

13 Replies

750 Views

Last post by OilyBill
Tue Feb 10, 2026 5:18 pm
Common courtesy when borrowing tools

Last post by OilyBill « Tue Feb 10, 2026 4:32 pm
Replies: 24
by South Park Zephyr » Sat Feb 07, 2026 3:13 pm

First post

I had a bit of a rude incident happen today.
I loaned my hub puller to a local T owner months ago, I explained how to use it properly.
Not a tool I use often so I didn’t mind he had it way longer than he needed it.
Much to my surprise when I requested it to be returned, he dropped it by my shop when I wasn’t there. When I unwrapped it, I found...

Last post

A friend of mine mentioned what HE does, when someone borrows a tool from him. He gets out his phone, and under their number listing, he adds the tool they borrowed as their middle name. So he never actually loses a tool, and always knows what tool they have, and who it is that has it.

Also, I learned that SOMETIMES, you DON'T WANT TO BORROW A...

24 Replies

1174 Views

Last post by OilyBill
Tue Feb 10, 2026 4:32 pm
TT Wheels-Need Re-Spoking

Last post by Jacob Mangold « Tue Feb 10, 2026 4:03 pm
Replies: 12
by Jacob Mangold » Sun Feb 08, 2026 11:07 pm

First post

Hey there Model T friends. This is my first post in a good while. As most of you know already, I own a 1926 TT. I have not driven my truck all that much in the past few years and that it=s due to one central reason. Almost every spoke out of the 48 on the car is loose. This looseness causes the truck to walk all over the place when I'm driving and...

Last post

Haha, I guess I could do that. Just kidding! I want to keep the original wooden wheel look. Spokes are too far gone to be soaked. Reached out to Dave and I am awaiting a response.

Thanks for your help, Jacob Mangold

12 Replies

417 Views

Last post by Jacob Mangold
Tue Feb 10, 2026 4:03 pm
1922 Coil Box. USA vs. Canadian

Last post by Original Smith « Tue Feb 10, 2026 3:36 pm
Replies: 5
by BaltimoreTMan » Sun Feb 08, 2026 10:17 pm

First post

Does anyone know if there’s a difference between Canadian coil boxes and US coil boxes. I have a 1922 Canadian tourer… the coil box needs rebuilt. The wood isn’t the correct thickness and when the lid is on I short out coils….

I either want to buy a rebuild kit, or maybe someone has a nice rebuilt one ready to go for me?

Thanks for your help!...

Last post

Why not buy a rebuild kit? Do it yourself, and you will get a feel for what this hobby is all about. For myself, I bought one of Reagans plastic kits.

5 Replies

295 Views

Last post by Original Smith
Tue Feb 10, 2026 3:36 pm
Syverson cabinet part

Last post by Daisy Mae « Tue Feb 10, 2026 2:04 pm

by Daisy Mae » Tue Feb 10, 2026 2:04 pm

I know the 2nd owner started a partial restoration on Daisy in the mid/late 60's after being stored since 1935.
Cleaning up the wood on her, while the firewall is original, the hood boards are replacements built by Syverson Cabinet, from their Des Plaines location they vacated mid 60's.
Just some continuing interesting archeology......

0 Replies

225 Views

Last post by Daisy Mae
Tue Feb 10, 2026 2:04 pm
Service call

Last post by Russ T Fender « Tue Feb 10, 2026 1:12 pm
Replies: 10
by Dollisdad » Mon Feb 09, 2026 2:52 pm

First post

IMG_5109.jpeg IMG_4990.jpeg IMG_5044.jpeg IMG_5004.jpeg

Last post

Early runabouts had a square tank. Look at the picture of the open runabout from the Ford agency on Broadway in NY. The build specs on my ‘10 Touring shows that it was delivered to that Ford agency in March of 1910.

10 Replies

560 Views

Last post by Russ T Fender
Tue Feb 10, 2026 1:12 pm
ISO TT cab.

Last post by TXGOAT2 « Tue Feb 10, 2026 11:38 am
Replies: 11
by Dallas Landers » Wed Jul 30, 2025 12:04 pm

First post

I am looking for a TT cab for a new project I'm working on. I have a complete running 26 chassis. My buddy found a TT flat bed with all the stock racks in amazing condition. I will get pics posted soon. Just seeing what is available within reasonable distance.

Last post

Interesting.....

11 Replies

1270 Views

Last post by TXGOAT2
Tue Feb 10, 2026 11:38 am
Crankshaft pulley ??

Last post by Jerry VanOoteghem « Tue Feb 10, 2026 11:27 am
Replies: 1
by Dan Hatch » Tue Feb 10, 2026 10:16 am

First post

Has anyone ever taking an Aluminum replacement pulley that is not adjustable and make it adjustable?
I have one that is not snd want to make it that way.
Thanks Dan

Last post

Should theoretically be possible, as long as there's enough meat in the pulley to fit a clamp bolt, such as the adjustable ones have.

1 Replies

220 Views

Last post by Jerry VanOoteghem
Tue Feb 10, 2026 11:27 am
Last call to order TW timer brushes

Last post by love2T's « Tue Feb 10, 2026 8:59 am

by love2T's » Tue Feb 10, 2026 8:59 am

As subject line states...this is the last week I will take requests for brushes to be custom made for the TW timer.
See my listing in the parts section. Thank you.

0 Replies

156 Views

Last post by love2T's
Tue Feb 10, 2026 8:59 am
1914 touring top bows

Last post by BRENT in 10-uh-C « Tue Feb 10, 2026 6:54 am
Replies: 10
by Abner1601 » Sat Jan 31, 2026 2:33 pm

First post

Can someone please provide the measurement of the front top bow from the locking pin at the bottom of the iron to the top of the wood bow? Thank you!

Last post

Alan,
An upholstery friend who helped me with my 1911 upholstery told me that, within 1/4 is acceptable.

You will always be your own worst critic .
Keith

In my line of work, I only wish that were always true Keith. The irony in the Restoration world is they either criticize the costs ...or the craftsmanship. If the 'budget' is there,...

10 Replies

838 Views

Last post by BRENT in 10-uh-C
Tue Feb 10, 2026 6:54 am
Building a 1913 brass speedster(Help Needed)

Last post by Luxford « Tue Feb 10, 2026 5:52 am
Replies: 5
by frontyboy » Tue Feb 03, 2026 9:24 pm

First post

It has a Rootlieb flat wood dashboard. I want to add a sheet metal cowl. more of a curved shape. Any ideas or does anyone have one for sale? or a blue print or patterns?

thnx
frontyboy.

Just respond here is the best

Last post

Is this the kind of thing you are looking for, the original builder of my speedster had a metal curved shape built in the shape of a tiger moth cowling.
It just goes back from the normal wood dash and around the sides.

5 Replies

639 Views

Last post by Luxford
Tue Feb 10, 2026 5:52 am
Lego T

Last post by SoNorCal « Mon Feb 09, 2026 8:10 pm
Replies: 4
by Daisy Mae » Mon Feb 09, 2026 2:27 pm

First post

Get it for your grandkids! Get it for yourself!
To be issued in March.

LEGO 11376 Ford Model T celebrates the revolutionary automobile - Jay's Brick Blog

Last post

Not to offend anyone, but since the windshield folds forward, is it a 1913 ? :P

4 Replies

392 Views

Last post by SoNorCal
Mon Feb 09, 2026 8:10 pm
Bakersfield Swap meet is GO !

Last post by SoNorCal « Mon Feb 09, 2026 8:04 pm
Replies: 17
by SoNorCal » Fri Jan 23, 2026 11:32 pm

First post

All,
The Bay Area Horseless Carriage Club is stepping in to take over the “Bakersfield” swap meet. The event will be the same location and date, Price per space will be 65 dollars. More information will be forthcoming soon.

This is just a quick announcement moments after the vote to let everyone know Bakersfield Lives again.

More to Follow

Last post

Good point, Andy.

Nothing like a little “Trash talk” to get things started - ha ha ha!

I’ll pass that one along. It’s especially important because the field is an active airport, and we are along the taxiway.
We want to be good tenants, and not have our trash blowing into the airport operations.

Any more good ideas for how to make things...

17 Replies

1513 Views

Last post by SoNorCal
Mon Feb 09, 2026 8:04 pm
What is it called ?

Last post by Dan Hatch « Mon Feb 09, 2026 2:48 pm
Replies: 4
by johnr » Mon Feb 09, 2026 12:41 pm

First post

I am looking for the proper name of the sheet metal cover that attached to the wood firewall ( 1915 ) and
covers where the rear of the motor sticks out.
I also assume it transitions down to the floor board.
I am also looking for a source for this item or a drawing for fabricating as a last resort.

Thank you

Last post

Those were made by Fun Projects. Not sure who does now. Dan

4 Replies

340 Views

Last post by Dan Hatch
Mon Feb 09, 2026 2:48 pm
Rain on Tin; Driving the Tin Phoenix on a rainy day in Hawaii

Last post by Daisy Mae « Mon Feb 09, 2026 2:48 pm
Replies: 1
by Abakca » Mon Feb 09, 2026 1:08 pm

First post

Enjoy a short ten minute drive in the rain in Hawaii. Have a great day!

Last post

Almost look like period correct roads too! ;)

Fun!!

1 Replies

247 Views

Last post by Daisy Mae
Mon Feb 09, 2026 2:48 pm
What Did Your Chapter Do in 2026?

Last post by AndyClary « Mon Feb 09, 2026 9:12 am
Replies: 7
by AndyClary » Thu Jan 01, 2026 7:19 pm

First post

New year, new thread. Our chapter has done nothing so far. 1 1/2 inches of rain today. I wanted to start the thread in case someone did something worth sharing.

Andy
Redwood Empire Model T Club

Last post

Thanks for posting on your shop day. I think shop days are becoming as popular as tours, at least in the winter. We are having one this weekend.

Andy

7 Replies

752 Views

Last post by AndyClary
Mon Feb 09, 2026 9:12 am
Ruckstell Axle Housing Question

Last post by skyhunter « Sun Feb 08, 2026 11:07 pm
Replies: 7
by skyhunter » Sat Feb 07, 2026 7:37 pm

First post

On the right side of the car of the rear end, is there supposed to be a drain plug on the far end of the axle housing on the underside just before where the brake housing is riveted to the housing?

Last post

Thanks, appreciate the info.

7 Replies

464 Views

Last post by skyhunter
Sun Feb 08, 2026 11:07 pm
Anti tarnish headlamp covers. Plz read

Last post by TXGOAT2 « Sun Feb 08, 2026 7:32 pm
Replies: 20
by Karl Von Neumann » Mon Dec 15, 2025 1:35 pm

First post

Working on getting some anti tarnish coverings made for my car and a few friends. May even make these to sell. So far we have worked out fitted headlight covers for 13 14 models (earlier models will come soon) hub cap covers and speedo covers. Pototyping of the rad and cowl lamps are progressing. All covers are made of water proof black canvas...

Last post

I'm pretty sure that that the covers would retard brass tarnish and greatly reduce reflector tarnishing. Applying and buffing plain Carnauba wax would probably delay brass tarnishing as well as anything, and covering the waxed parts with well-fitting covers would offer further protection by keeping dust, moisture, bird emissions, and busy fingers...

20 Replies

2200 Views

Last post by TXGOAT2
Sun Feb 08, 2026 7:32 pm
Help ID a head.

Last post by John kuehn « Sun Feb 08, 2026 5:22 pm
Replies: 6
by Pep C Strebeck » Sat Feb 07, 2026 7:35 pm

First post

I know that I have seen one before, but I do not remember the name/maker. Any help would be appreciated.

head.jpeg

Last post

What was the improvement supposed to be with the angled spark plugs. Better combustion chamber performance or ?? Another T head for??

6 Replies

525 Views

Last post by John kuehn
Sun Feb 08, 2026 5:22 pm
Minnesota Swapmeet April 18 2026

Last post by BobP « Sun Feb 08, 2026 5:06 pm

by BobP » Sun Feb 08, 2026 5:06 pm

We are having our 9th annual Model T/ Model A/ prewar swap meet/ car show/ get together on Saturday April 18, 2026 at 700 A.M. at our farm. Free setup and admission. Outside spaces only. Bring your parts or cars to sell. [Model T's- Model A's or any makes pre 1945 or just come to visit. Everyone is welcome. Free primitive camping the night before....

0 Replies

194 Views

Last post by BobP
Sun Feb 08, 2026 5:06 pm
Low vs. High Head

Last post by ModelTWoods « Sat Feb 07, 2026 10:39 pm
Replies: 5
by Petrah Phyre » Fri Feb 06, 2026 6:36 pm

First post

My '26 speedster came with a low head. I have a high head in my stash. It looks like the high head has larger water jackets (better cooling?). What would your suggestions be on which would be best and why?

Thanks!

Last post

The high head does have a larger water capacity, but the low head has a slightly high compression ratio (i.e. smaller combustion chamber).

This is what I saw listed on TBay. Didn't know if it was true or not. May be why the guy who originally put it together used the low head. Is this why the 22hp vs. 20hp? The low head is already painted, so I...

5 Replies

512 Views

Last post by ModelTWoods
Sat Feb 07, 2026 10:39 pm
Touring top w/flap

Last post by Tmooreheadf « Sat Feb 07, 2026 7:59 pm
Replies: 7
by PhoneGuy » Sat Feb 07, 2026 8:53 am

First post

I am curious about the touring tops. Which years typically had the flaps on the back or was an aftermarket thing.

Last post

When ordering new tops from Classtique, on their order form, roll up rear panels are listed as an option on most ant year they supply. They sure are nice providing “ flow thru ventilation” on any touring car!

7 Replies

415 Views

Last post by Tmooreheadf
Sat Feb 07, 2026 7:59 pm
Autolite spark plug number

Last post by John kuehn « Sat Feb 07, 2026 6:35 pm
Replies: 14
by ModelTWoods » Mon Jan 26, 2026 11:25 pm

First post

What is the Autolite spark plug number for 1/2 thread base plugs? I have seen three numbers: F11 , #25 , and 3095.

Last post

Motorcraft 465 works OK. Ford is introducing a 465A that’s supposed to be an improvement.

14 Replies

1177 Views

Last post by John kuehn
Sat Feb 07, 2026 6:35 pm
What Glass to install inside of Windshield Channel on 1914

Last post by Allan « Sat Feb 07, 2026 5:43 pm
Replies: 13
by BRENT in 10-uh-C » Thu Feb 05, 2026 2:38 pm

First post

Dropped off a 1914 Windshield Frame along with the brass Glass Channel to mount it in. The shop calls me to inform that their Plate Glass is 3/16 thick however the Safety Glass is 1/4 thick. The option they gave is to have Plate Glass cut and then tempered however he also felt like that was against the law to use tempered in the Windshield...

Last post

I have never seen 3/16 plate glass in original windscreens in Australian bodied T's. My 1915 Canadian sourced tourer had 1/4 glass and the brass channel. Other spare frames I have found and traded were all to take 1/4 glass. Is this a Canadian thing?
If 3/16 glass was mounted in our components without bedding tape, it would rattle and leak water...

13 Replies

644 Views

Last post by Allan
Sat Feb 07, 2026 5:43 pm
Need help with assembling 1915 roadster seat wood

Last post by frank.koonce « Sat Feb 07, 2026 2:55 pm
Replies: 5
by frank.koonce » Wed Feb 04, 2026 10:17 pm

First post

Hello. I can't figure out some details about the seat assembly kit from Cubels for a 1915 Roadster. I would be grateful if some of you could help me with these questions:

1. See picture #1. Are the lower extensions of these seatback vertical posts supposed to sit on top of the seat riser cutout, as shown in the picture, or is it supposed to go...

Last post

The one in left corner at the rear looks to me to be the one possibly for on the right side where the door latch goes. From the angle it looks like the whole back section is too high for the body metal. Unless you don't have the tin against the sill at the bottom. The part on the floor looks like it might the top for the back panel.

Thank you!

5 Replies

447 Views

Last post by frank.koonce
Sat Feb 07, 2026 2:55 pm
Grey & Davis aftermarket Starter/generator

Last post by DanTreace « Sat Feb 07, 2026 12:56 pm
Replies: 1
by Jeff » Sat Feb 07, 2026 12:04 pm

First post

I sourced this unit for a guy in India who has a 1915 T and wants to add a starter, but also wants everything period correct.
I got it from Dodge Riedy who got it to me here in Idaho a few days ago.
The bendix was completely stuck at first. After a bit of coaxing with penetrating oil, dunk tank and carb cleaner, I got the bendix working again....

Last post

Neat accessory for sure. Have seen one in Jack Putman’s place on his T

Wondered how fan was fitted, on Jack’s the large gear has pulley for fan belt. Instruction page notes T fan bracket remains in place.

IMG_0924.jpeg

IMG_0925.jpeg

1 Replies

313 Views

Last post by DanTreace
Sat Feb 07, 2026 12:56 pm
Front spring question

Last post by Moxie26 « Sat Feb 07, 2026 11:35 am
Replies: 6
by Rich P. Bingham » Thu Feb 05, 2026 1:20 pm

First post

This fabric item was between the front spring and the frame member on my ‘13. It appears to be long grain top material. The 1915 parts book shows an identical item, I’m wondering if anyone knows the purpose of the four small brass rivets ? IMG_3733.jpeg

Last post

It does look like remnants of a backyard fix.

6 Replies

562 Views

Last post by Moxie26
Sat Feb 07, 2026 11:35 am
Need Model T transmission "Top-Hat" bearing measurments

Last post by speedytinc « Fri Feb 06, 2026 11:13 pm
Replies: 11
by accuratemodelmaker » Wed Feb 04, 2026 5:33 pm

First post

Hey, can anyone in the group share the known measurements of the Model T transmission early Brake Drum Top-Hat bearing? I see some of them given by Benson Archives parts listing pages, but would prefer to have actual measurements, even if a little worn.

Thanks,

Jim Key
Accurate Models

brake drum 5B.jpg
brake drum 4.JPG

Last post

Jim Key:
We know how to identify the early brake drum(pre 16) We know that a distance plate & 26 disks are required. We know what the earliest clutch hub looks like. We know what the later drums look like & 25 disks. We know when the top hat bushing changed to 3 thrust washers. We know how to identify the earliest & latest clutch hubs.

We dont...

11 Replies

690 Views

Last post by speedytinc
Fri Feb 06, 2026 11:13 pm
Antifreeze

Last post by TXGOAT2 « Fri Feb 06, 2026 8:52 pm
Replies: 21
by LeviSara » Wed Feb 04, 2026 9:44 pm

First post

Hello there! Can I use red 50/50 OAT antifreeze in the 1927 model t?

Last post

There have been discussions on this subject here. /////// See below......

**** I tried a forum search using: Evans coolant Many relevant results from several forum members.

21 Replies

1148 Views

Last post by TXGOAT2
Fri Feb 06, 2026 8:52 pm
Need to lower steering unit 1913 speedster.

Last post by TRDxB2 « Fri Feb 06, 2026 6:42 pm
Replies: 9
by frontyboy » Thu Feb 05, 2026 12:43 am

First post

Does anyone still make or have a set of steering unit tapers? Venders used to supply them but have not found any. Any ideas??
answer me here its quicker.
thnx,
frontyboy

Last post

Here are some methods

9 Replies

611 Views

Last post by TRDxB2
Fri Feb 06, 2026 6:42 pm
Late "T" Tire Valve Stem & Hardware

Last post by Original Smith « Fri Feb 06, 2026 5:51 pm
Replies: 3
by careese@vcu.org » Tue Feb 03, 2026 8:02 pm

First post

Would like to communicate with anyone knowlegable with the late Model T (and early Model A) innertube valve stems:
Schrader 777, 888, 6300
Dill VS6, VS74 , VS 74, TR 16 VS 74, and VS-74A
Trying to understand the transition from Model T (wood spoke wheel), through the late Model T (wire spoke wheel), to the early Model A.

Last post

Even though Ford used 777's from the factory, I have found 888's to be a perfect replacement, and less weight too.

3 Replies

529 Views

Last post by Original Smith
Fri Feb 06, 2026 5:51 pm
Relative magnet height question.

Last post by speedytinc « Fri Feb 06, 2026 5:31 pm
Replies: 32
by Darren J » Tue Jan 27, 2026 6:45 pm

First post

I reinstalled my magnets and I am using the KR Wilson jig. Reading over the comments on this forum regarding this issue I see people say they shoot for an overall variance of +/- 20 thousands. I can't find any mention regarding the magnet height relative to the trans shaft. The book says anywhere between 13/16 and 53/64. Is this measurement not...

Last post

Darn it Dan! Now I have another thing to address on a rebuild, the transmission shaft flange.

Allan from down under.

Unless the clutch hub has worn the shaft, losing its press fit, the center shaft need not be replaced.
A light facing with a tool post grinder in a lathe (same way a crank flange is squared up) will take care of any slight...

32 Replies

1890 Views

Last post by speedytinc
Fri Feb 06, 2026 5:31 pm
Route 66 Centennial

Last post by JohnM « Fri Feb 06, 2026 3:19 pm
Replies: 2
by CamMan » Fri Feb 06, 2026 2:14 pm

First post

There are many events planned to commemorate the opening of Route 66 in 1926. Any clubs have plans? Here is a photo from 2012 for the worlds heaviest Model T in Tulsa. Commeration01b.jpg

Last post

20250905_144817.jpg
Route 66 near Waynesville Mo from Hillbilly Tour 2025

2 Replies

323 Views

Last post by JohnM
Fri Feb 06, 2026 3:19 pm
Cold on the farm.

Last post by TXGOAT2 « Fri Feb 06, 2026 2:17 pm
Replies: 15
by Dollisdad » Thu Feb 05, 2026 2:49 pm

First post

IMG_5046.jpeg IMG_3004.jpeg IMG_4925.jpeg IMG_5071.jpeg

Last post

I don't think the line across the radiator on the touring is a fender brace. It appears to be attached to the radiator shell. I'd guess it's an accessory or owner added item for the purpose of retaining a lower radiator winter front to prevent the radiator from freezing in cold weather. It evidently isn't for mounting a license plate.

15 Replies

903 Views

Last post by TXGOAT2
Fri Feb 06, 2026 2:17 pm
Need Help Identifying Windshield Brackets

Last post by George House « Fri Feb 06, 2026 12:17 pm
Replies: 4
by DontKnowMuch » Sun Dec 31, 2023 11:04 am

First post

What do these fit? Are they for a 1925 Fordor?
IMG_5484.jpeg

Last post

Why don’t you send an email to James thru the Forum?

4 Replies

1054 Views

Last post by George House
Fri Feb 06, 2026 12:17 pm
26-27 Proof of Concept

Last post by RajoRacer « Fri Feb 06, 2026 12:04 pm
Replies: 5
by TMiller6 » Fri Jan 30, 2026 5:06 pm

First post

I need twelve of the 1926-27 rear curtain fasteners for the open car top irons. The current offerings (RH) fit if you don’t try to sandwich the side curtains in between.

The Model A Roadster has snaps (LH) that fasten to the windshield with smaller holes. The Model A open cars also use the same side curtain fasteners on the body as do our Model...

Last post

I only had 10 of the style on the right !

5 Replies

838 Views

Last post by RajoRacer
Fri Feb 06, 2026 12:04 pm
Marietta, Ohio swap meet, March 7, 2026

Last post by Ruxstel24 « Fri Feb 06, 2026 11:19 am
Replies: 10
by Tmooreheadf » Tue Jan 06, 2026 8:40 pm

First post

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

Last post

this is a great show...hope someone brings some frames.....

I won’t be able to make it but I have a 26 frame about 3 hours north…

10 Replies

930 Views

Last post by Ruxstel24
Fri Feb 06, 2026 11:19 am
Brake pedal free play

Last post by Eric Sole « Fri Feb 06, 2026 5:34 am
Replies: 12
by Eric Sole » Sun Jan 25, 2026 4:42 am

First post

I'm trying to establish if the cam portion of my brake pedal is worn enough to warrant replacing the pedal. The pedal stroke seems to be too short, and so the band needs to be overly tightened to compensate, at least it seems that way.
The pedal supports are new reproduction parts.

Question: How much pedal free play can be considered within...

Last post

I already started the welding and filing process on the pedal cam, but the last two posts present viable, inexpensive solutions. Thanks for those.

12 Replies

1111 Views

Last post by Eric Sole
Fri Feb 06, 2026 5:34 am
Camshaft Rear Bearing Reamer Bar Discussion from Classifieds...

Last post by Dan McEachern « Fri Feb 06, 2026 1:45 am
Replies: 4
by BRENT in 10-uh-C » Thu Feb 05, 2026 11:01 am

First post

RE:

There is an interesting post in the Classifieds, and since myself, Steve, and a few others kinda hijacked John's ad, maybe it would be best to continue our discussions here.

So my next questions are; -in looking at pictures of Brad's (-and other's Boring Bar), it appears that the Engine Block's Cam bores become the 'datum' for aligning the...

Last post

A few comments: 1) If you are reaming the rear bushing to compensate for a front or center cam bearing bored off center, that's just plain bad practice. Replace the bearings or adjust your method of boring them to get them concentric with the OD. Reaming them to size in a bench vise is a good way to get them off center. They should always be bored...

4 Replies

454 Views

Last post by Dan McEachern
Fri Feb 06, 2026 1:45 am
My kind of T...

Last post by Chris Bamford « Thu Feb 05, 2026 7:55 pm
Replies: 7
by Chris Bamford » Thu Feb 05, 2026 12:33 am

First post

With which a guy can set out for a club meeting, after dark, in February, with every expectation of a successful return hours later. Mid-'60s restoration, easy start on mag, and enough patina that sloppy roads are barely an inconvenience.

My kind of T.jpeg

Last post

Looks like a lot of fun, Dallas. Always nicest when the cosmetics age together.

Extra points for being a working truck!

7 Replies

824 Views

Last post by Chris Bamford
Thu Feb 05, 2026 7:55 pm
Utah Freinds

Last post by Rich P. Bingham « Thu Feb 05, 2026 3:10 pm
Replies: 5
by Chuck Hale » Thu Jan 01, 2026 8:51 pm

First post

Happy New Year's to all of you model t enthusiasts in or near Utah. A few of us are getting together for lunch on Saturday Jan 3rd at 1130 am at the Red Robbin in Murray Ut. Not planning to take my speedster this time as the weather looks to be not in favor of speedsters this week.
We're just hoping to meet a few other T people, talk about cars...

Last post

Definitely keep in touch Chuck ! It would be great to meet up with you folks ! And yes, there’s a lot of good Model T type roads in “Uta-Ho” !

Looking forward to touring weather !

5 Replies

1025 Views

Last post by Rich P. Bingham
Thu Feb 05, 2026 3:10 pm
Speedway Motors Windshield Frame

Last post by Wobbly Dave « Wed Feb 04, 2026 11:39 pm
Replies: 3
by Wobbly Dave » Tue Feb 03, 2026 9:33 pm

First post

Does anyone have any experience with the Speedway Motors Windshield Frames for 26 Roadsters/Touring Cars? Do they match originals for look and fit?

Last post

Yes. Mr. Roadster. Thanks.

3 Replies

540 Views

Last post by Wobbly Dave
Wed Feb 04, 2026 11:39 pm
Any idea who made this engine stand head

Last post by Tparts « Wed Feb 04, 2026 8:12 pm

by Tparts » Wed Feb 04, 2026 8:12 pm

This engine stand bracket (head unit) is of unknown manufacturer. Any ideas?

0 Replies

550 Views

Last post by Tparts
Wed Feb 04, 2026 8:12 pm
'13 Speedster rounded sheet metal cowl ??

Last post by Allan « Wed Feb 04, 2026 4:29 pm
Replies: 3
by frontyboy » Wed Feb 04, 2026 12:01 pm

First post

Have a new Rootlieb speedster kit with flat dashboard. I want to add a rounded sheet metal cowl. Looking for sheet metal cowl, or plans or patterns. I would buy a metal cowl, or a set of plans or drawings.

If you have made one I would like to know how you did it or who did it, any information would be helpful. Best to contact me here.

thnx,...

Last post

With the firewall and rear mounting frame in place, use stiff cardboard to make a pattern that fits the two components. That will give you the shape you need to cut in the steel sheet. Custom made for a custom fitment. No need to follow a plan .

Allan from down under.

3 Replies

446 Views

Last post by Allan
Wed Feb 04, 2026 4:29 pm
Hempey cooper boring bar

Last post by Karl Von Neumann « Wed Feb 04, 2026 3:29 pm
Replies: 8
by Randall strickland » Wed Jan 25, 2023 1:50 pm

First post

I picked this up a couple years ago and am just getting around to mess around with it now, someone has taken false cams off it and the boring bar has to be removed to install them back on, has anyone ever taken boring bar out?thanks 50C753A3-C37A-4BC8-BBE8-66D5B365E032.jpeg

Last post

Randall do you still have this hempy? Id love to get measurements from the cam blanks mine are missing

8 Replies

2416 Views

Last post by Karl Von Neumann
Wed Feb 04, 2026 3:29 pm
Edsel beat us to it.

Last post by tdump « Wed Feb 04, 2026 10:50 am
Replies: 7
by Dollisdad » Mon Feb 02, 2026 11:41 am

First post

Model T Speedster by Edsel Ford. 11/23/10. IMG_5063.jpeg

Last post

I like it, how soon can I get it delivered? :lol:
I like the longer hood though,maybe with that 6 cylinder experimental engine in it :D

7 Replies

1034 Views

Last post by tdump
Wed Feb 04, 2026 10:50 am
Top Support Iron Question regarding Seat Upholstery wrapping.

Last post by BRENT in 10-uh-C « Wed Feb 04, 2026 10:38 am
Replies: 2
by BRENT in 10-uh-C » Tue Feb 03, 2026 2:11 pm

First post

On the Top Support Irons that bolt to the Seat and support the Top Irons where the top pivots, how does the interior Upholstery wrap around this Support? Was it hand-stitched underneath, or ?? We are specifically working on a 1914 Touring, but any of the early open cars will likely be the same. Any pix??

TIA!!

Last post

Thanks Dan

2 Replies

401 Views

Last post by BRENT in 10-uh-C
Wed Feb 04, 2026 10:38 am
Stewart speedometer

Last post by Harley_97 « Wed Feb 04, 2026 9:08 am
Replies: 16
by BillM » Sat Jan 31, 2026 4:07 pm

First post

Am I correct that this swivel is made In October 1919 and is a 6:1 ratio? If so would it be correct to use on a 1923 coupe?

Last post

Thanks Russ.

16 Replies

1094 Views

Last post by Harley_97
Wed Feb 04, 2026 9:08 am
What are your thoughts about some brass Holley Carb Bowls?

Last post by Dan Hatch « Wed Feb 04, 2026 4:48 am
Replies: 8
by George Hand » Thu Jan 29, 2026 3:51 pm

First post

On face book there is a gentleman that does metal spinning, I ask a question to him wondering if he could spin some replacement Bowls for the early Holley Carbs, hir reply was get me the dimensions. These would not be exactly like the originals and I know in the past someone was cutting the top off originals and silver soldering a new top (ring)....

Last post

How about brass plating some steel bowls?

8 Replies

940 Views

Last post by Dan Hatch
Wed Feb 04, 2026 4:48 am
Group 2L Ford V8 battery

Last post by TXGOAT2 « Tue Feb 03, 2026 7:51 pm
Replies: 3
by Original Smith » Tue Feb 03, 2026 6:36 pm

First post

I'm helping a friend with an original 36 Ford Sedan. He needs a new original type battery. I used to work at Ford Obsolete in Long Beach in my younger days, and as I recall the battery he needs is listed above. If those V8 boys are as picky as me, why can't he find the correct battery for his car?

Last post

Very nice!

3 Replies

412 Views

Last post by TXGOAT2
Tue Feb 03, 2026 7:51 pm
Magnet Clamps

Last post by TXGOAT2 « Tue Feb 03, 2026 12:22 pm
Replies: 15
by ABoer » Mon Feb 02, 2026 10:41 am

First post

Hi All ;
Can you tell me what are the best Magnet Clamps ?
Thank for your answer .
Toon 001.JPG

Last post

Metallurgy may differ. Plates that have been bent and straightened will be somewhat hardened, which may affect their magnetic behavior. Soft steels magnetize easily, but will not hold magnetism well. Harder steels and steel alloys will hold magnetism. Field pieces uses in association with permanent magnets are usually very soft steel.

15 Replies

823 Views

Last post by TXGOAT2
Tue Feb 03, 2026 12:22 pm
Too cold

Last post by TXGOAT2 « Mon Feb 02, 2026 6:23 pm
Replies: 10
by Dollisdad » Sat Jan 31, 2026 5:22 pm

First post

-7 this morning. Been - all week long. Too cold to really feel like working on T stuff. I hope it gets better. IMG_4608.jpeg

Last post

Extremes have a way of working against themselves. There is no cold , only more or less heat.

10 Replies

879 Views

Last post by TXGOAT2
Mon Feb 02, 2026 6:23 pm
In car tappet/push rod exchange.

Last post by speedytinc « Mon Feb 02, 2026 5:53 pm
Replies: 18
by Allan » Sun Feb 01, 2026 7:10 pm

First post

I am working on returning another barn fresh car to active duty but have struck a hurdle. No 1 cylinder was way down on compression. A bore scope revealed a set of original two piece valves, with well worn stems/guides, so off came the head. The valves were actually quite reasonable so the plan is to ream the guides to take new oversize stem one...

Last post

I had 2 adjuster bolts shear the first time I tried a self locking set.

18 Replies

909 Views

Last post by speedytinc
Mon Feb 02, 2026 5:53 pm
ECCT -vs- Strobo-Spark

Last post by Chris Barker « Mon Feb 02, 2026 4:45 pm
Replies: 20
by KWTownsend » Thu Jan 15, 2026 3:34 pm

First post

For half a century, members of the Rose City Model T Club have had access to Hand Cranked Coil Testers (HCCT) to tune up Model T coils. Nearly two decades ago, the club invested in a Strobo-Spark and it was a game changer. Today, the Electronically Cranked Coil Tester (ECCT) is available, which tests coils using dwell instead of amperage.

The...

Last post

A good feature of the FACT tester is that you SEE the current waveform, with its peak current and time-to-fire, and any follow on sparks.

Congrats to those on this forum that developed it.

20 Replies

1475 Views

Last post by Chris Barker
Mon Feb 02, 2026 4:45 pm
PerspecTive phoTo

Last post by South Park Zephyr « Mon Feb 02, 2026 2:54 pm
Replies: 210
by Bryant » Tue Feb 22, 2022 6:37 am
1

2

3
First post

The model T. How do you see it? 46A57EE6-DF6F-4561-A777-C57F8C57F66B.jpeg

Last post

This looked better before the snow melted
210 Replies

145885 Views

Last post by South Park Zephyr
Mon Feb 02, 2026 2:54 pm
E&j Cowl and tail lamp question

Last post by Karl Von Neumann « Mon Feb 02, 2026 1:48 pm
Replies: 4
by Karl Von Neumann » Sun Feb 01, 2026 10:45 am

First post

Are all the e&j pat 1908 cowl and tail lamps the same size? I'm making the brass antitarnish covers and I need to know. I tried my covers on a 13 of a chapter friend and it fit fine just want to make sure be fore I post that it fits all patient 08 lamps when it might not. Thanks for the wisdom guys

Last post

Karl, Some early 1909 Fords came with three tier sidelamps, and they are larger than a two tier sidelamp. I hope this helps. Russ Furstnow

Russ I have heard that as well and I have a 3 tier e&j here its huge! That's why I'm trying to find out all the sizes etc. Working thru the list of headlights as well

4 Replies

449 Views

Last post by Karl Von Neumann
Mon Feb 02, 2026 1:48 pm
Anyone have a valve similar to this in your stash?

Last post by TRDxB2 « Mon Feb 02, 2026 1:19 pm
Replies: 13
by schwabd1 » Sun Jan 25, 2026 10:31 pm

First post

I'm gathering parts to build a '26 roadster fuel delivery truck with my grandsons. I know many of you have all kinds of interesting things hidden away. I'm looking for a valve similar to this that would be used on a fuel delivery truck. Anyone out there have something similar they would be willing to part with?...

Last post

I'm gathering parts to build a '26 roadster fuel delivery truck with my grandsons. I know many of you have all kinds of interesting things hidden away. I'm looking for a valve similar to this that would be used on a fuel delivery truck. Anyone out there have something similar they would be willing to part...

13 Replies

1529 Views

Last post by TRDxB2
Mon Feb 02, 2026 1:19 pm
Ready, set….

Last post by love2T's « Mon Feb 02, 2026 8:27 am
Replies: 20
by Dollisdad » Fri Jan 30, 2026 11:55 pm

First post

IMG_4996.jpeg IMG_4980.jpeg IMG_4979.jpeg IMG_4982.jpeg

Last post

Thank you for clearing that up. It looks like a fine touring car.

Yep thanks. Had a lot of us wondering what was going on ha ha.
And I'm sure Original Smith is glad to see the horn is mounted correctly! Me too for that matter. :lol:

20 Replies

1169 Views

Last post by love2T's
Mon Feb 02, 2026 8:27 am
Muncie transmission support questions

Last post by KWTownsend « Sun Feb 01, 2026 8:43 pm
Replies: 6
by Reno Speedster » Sat Jan 31, 2026 4:23 pm

First post

I have a Muncie transmission that I am installing. I have the special joints and rebuilt it with new bearings, bushings, and idler shaft. I also have a bracket that looks like the one in the Muncie manual but I don’t have the “U” bolts and springs. From what I can seen in the manual illustrations, one bolt attaches the bracket to the bottom of the...

Last post

This one was mounted on the Muncie that was in my wife's speedster.

20260201_173927.jpg

20260201_174524.jpg

: ^ )

6 Replies

569 Views

Last post by KWTownsend
Sun Feb 01, 2026 8:43 pm
HOW TO REMOVE THE LOW DRUM BUSHING

Last post by speedytinc « Sun Feb 01, 2026 3:45 pm
Replies: 11
by speedytinc » Sat Jan 31, 2026 3:48 pm

First post

There is very little bushing to take the bite of a press tool.
I couldnt find the answer in past posts, so here it is.

I have removed with a modified flat washer, ground on the sides to an oval shape & the outer edges sharpened to just fit in the gap between the drum lip & the bushing. Angel into place as a device to catch the bushing to be able...

Last post

32#, thats quite a lot of steel.
The picture gives a perspective of how large those base plates & press tools are. I hadnt realized.
We have learned there are many different ways to remove that low drum bushing.
Thanks to all who participated.

11 Replies

722 Views

Last post by speedytinc
Sun Feb 01, 2026 3:45 pm
13-14 Heinze Coil Logo

Last post by KWTownsend « Sat Jan 31, 2026 3:48 pm
Replies: 4
by namdc3 » Fri Jan 30, 2026 6:29 pm

First post

I was wondering if someone could post a photo of the diamond graphic on this type of coil. This one isn’t clear enough for me to read everything, and I was just curious what a good one looks like. Thank you.
IMG_7929.png IMG_7930.png IMG_7931.png

Last post

The one 1914 coil I have is not imprinted.

4 Replies

466 Views

Last post by KWTownsend
Sat Jan 31, 2026 3:48 pm
Firestone Clincher White vs Universal Ribbed White

Last post by Steve Jelf « Sat Jan 31, 2026 12:24 pm
Replies: 9
by BRENT in 10-uh-C » Fri Jan 30, 2026 9:30 am

First post

I know this is going to be difficult since most people won't have experience with using both types for a true comparison, but since I need to get onto the waiting list for either of those two 30x3½ Clincher White tires, I gotta make a decision. So, between these two brands of tires, which tire will last longer mileage wise? The Ribbed Universal...

Last post

I believe there are two kinds of black clinchers — Blockley, and all the others. Those others are really all the same tire wearing various costumes (Wards, Firestone, Universal, etc.), with the same materials and manufacturing, made in the same factory. Is that true? Does it also apply to white clinchers?

9 Replies

720 Views

Last post by Steve Jelf
Sat Jan 31, 2026 12:24 pm
Mid winter Clinic 2026 McPherson Kansas

Last post by jab35 « Sat Jan 31, 2026 10:28 am
Replies: 18
by Afrazer » Mon Dec 01, 2025 10:41 am

First post

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

Last post

David and Dave

Thanks, looking forward to seeing it. jb

18 Replies

2179 Views

Last post by jab35
Sat Jan 31, 2026 10:28 am

New Topic

23202 topics

Page 1 of 233
- Jump to page:
1
2
3
4
5
…
233
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum