Classifieds - Parts - Page 94

Classifieds - Parts

New Topic

19830 topics

Page 94 of 199
- Jump to page:
Previous
1
…
92
93
94
95
96
…
199
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

45055 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Brass radiator at Hershey

Last post by Divcoone « Sat Oct 02, 2021 2:19 pm

by Divcoone » Sat Oct 02, 2021 2:19 pm

Used brass radiator removed from a Speedster when a new one was found at a good price. Radiator worked fine, didn’t overheat. Had been tanked and repaired. $300 at Hershey

0 Replies

970 Views

Last post by Divcoone
Sat Oct 02, 2021 2:19 pm
FS Weaver headlight Tester, Aiming Device

Last post by Bill Crosby « Sat Oct 02, 2021 2:15 pm

by Bill Crosby » Sat Oct 02, 2021 2:15 pm

This Weaver headlight Tester, Aiming Device would make a great addition to a period garage. It has great patina with all original decals and paint. If you have any questions send me an Email through this site. $75 + shipping or I can deliver to Hershey.

0 Replies

782 Views

Last post by Bill Crosby
Sat Oct 02, 2021 2:15 pm
Unusual 1911 straight-axle 6” rear hubs

Last post by Chris Paulsen « Sat Oct 02, 2021 11:08 am

by Chris Paulsen » Sat Oct 02, 2021 11:08 am

We’ve got a pair of straight axle rear hubs. Most are 5 1/2” in diameter. These are just over 6”, making them (I believe) late production, just before switching to tapered axles and hubs. Will be at Hershey at RSE 20-22.

0 Replies

1003 Views

Last post by Chris Paulsen
Sat Oct 02, 2021 11:08 am
WTB. 26-27 touring top irons

Last post by 56myway « Sat Oct 02, 2021 2:40 am

by 56myway » Sat Oct 02, 2021 2:40 am

Will be at Hershey looking to buy or trade an older set of touring top irons

0 Replies

552 Views

Last post by 56myway
Sat Oct 02, 2021 2:40 am
26/27 model T wire wheels F/S

Last post by Ken Buhler « Sat Oct 02, 2021 1:39 am
Replies: 1
by elliott1936 » Fri Oct 01, 2021 2:46 pm

First post

I have a set of wire wheels that I took off my speedster to install a set of Ask three Bolt wire wheels. The wheels are painted a light green and in nice condition. They are located in Portland Oregon. I am selling for $500.00 for the set of Five. Pictures will be available on request. I think these are hard to ship so pick up at my address is in...

Last post

email sent

1 Replies

1060 Views

Last post by Ken Buhler
Sat Oct 02, 2021 1:39 am
SOLD: A Nice Unknown Early Aluminum Intake Manifold 1912-1914'ish REO or ?

Last post by brassford « Fri Oct 01, 2021 11:22 pm
Replies: 2
by GGZ » Fri Sep 10, 2021 6:03 pm

First post

Here is a very nice, early high quality aluminum intake manifold. I was told it is for a 1912-1914'ish REO the Fifth (Thanks, Dave M.) Maybe could be adapted to a Model T overhead or ?

The intake port holes are about 1 3/8 and the mounting flange holes are about 2 1/2 center to center.. The carburetor hole is about 1 1/4 and the carburetor...

Last post

would make a nice downdraft

2 Replies

1614 Views

Last post by brassford
Fri Oct 01, 2021 11:22 pm
Brass T parts coming to Hershey

Last post by Mike Lebsack-Iowa « Fri Oct 01, 2021 9:57 pm
Replies: 4
by Mike Lebsack-Iowa » Wed Sep 29, 2021 6:54 pm

First post

For you brass enthusiasts looking for some of the essential goodie parts for pre-15 Ts. I will be at GBL34 in the Green Field. I have some nice resurfaced low heads, two very rare and restored early brass carburetors, and some new “old replacement” stock brass radiators that have never been installed. I have an exceptionally nice set of 23-25...

Last post

Tourabout, did not see your email so sent you one.

4 Replies

1679 Views

Last post by Mike Lebsack-Iowa
Fri Oct 01, 2021 9:57 pm
FS Runabout Shaped Set of T Parts - With Pictures

Last post by Ralph F « Fri Oct 01, 2021 9:30 pm
Replies: 3
by Monty 98 » Thu Sep 30, 2021 8:19 pm

First post

We are selling our 1920'ish T runabout, which we purchased in 2014.

It appears that chassis and body are a different year. Engine casting date is January 1920 (see photo). Engine # places engine assembly as the same month. After purchase, we cleaned up, refurbished and rewired numerous components and car was made drivable. Engine runs on...

Last post

I have sent you a pm
Ralph

3 Replies

1534 Views

Last post by Ralph F
Fri Oct 01, 2021 9:30 pm
15 Brass radiator for sale

Last post by 12chalmers « Fri Oct 01, 2021 7:28 pm

by 12chalmers » Fri Oct 01, 2021 7:28 pm

I have a 15 brass radiator, 14 Hood, Texas T waterpump for sale. Email me or phone for details. 801-694-9828 ewilliam01@msn.com

0 Replies

797 Views

Last post by 12chalmers
Fri Oct 01, 2021 7:28 pm
key

Last post by Mark Gregush « Fri Oct 01, 2021 2:10 pm
Replies: 5
by SparkTag » Thu Sep 30, 2021 11:13 am

First post

WTBUY Need a CLUM key #84 Give me a shout. Thank you for your time

Last post

Here are the ones on eBay;

Not a key expert, but the DB stands for Dodge Brothers cars. Do not know if Clum supplied different tumblers for Dodge Brothers than other cars of the era that used the same key number. You will note the peaks and valleys on both keys are pretty much the same.

5 Replies

1600 Views

Last post by Mark Gregush
Fri Oct 01, 2021 2:10 pm
Early low head

Last post by Philip Lawrence « Fri Oct 01, 2021 2:06 pm
Replies: 1
by Larry LaPatka » Thu Sep 30, 2021 2:08 pm

First post

048A9614-5DA1-49AD-A53C-7BB3B124873C.jpeg Perfect condition early low head. Great threads, magnafluxed and surfaced. $200.00 plus freight
Larry LaPatka
Email: ltlapatka@gmail.com
Home: 423.623.5656
Cell: 423.237.8846

Last post

That's a high head!

1 Replies

965 Views

Last post by Philip Lawrence
Fri Oct 01, 2021 2:06 pm
Hershey stuff

Last post by Chris Paulsen « Fri Oct 01, 2021 9:30 am

by Chris Paulsen » Fri Oct 01, 2021 9:30 am

We'll have our usual bunch of random stuff at Hershey. Of particular interest may be a pair 1922 one-piece spindles and a pair of 1911-12 clam-shell rear axle housings with 2-piece driveshaft. The housings and drive shaft need some of the rivets replaced, but are otherwise very good, clean, straight pieces. We're not done packing, and I'm sure...

0 Replies

814 Views

Last post by Chris Paulsen
Fri Oct 01, 2021 9:30 am
Installing a Warford.

Last post by speedytinc « Fri Oct 01, 2021 8:20 am
Replies: 6
by Chris Haynes » Thu Sep 30, 2021 2:48 pm

First post

What is involved with installing one of the new Warford's? Do they come with the shortened driveshaft like the Mitchell's do?

Last post

Yea, but the ending was pretty successful!!!

Thanks to you & your TEAM!!!!!!. The guy saved a few bucks & much of the tour.
We still talk about it. Thanks again on his behalf.

6 Replies

1438 Views

Last post by speedytinc
Fri Oct 01, 2021 8:20 am
WTB 26/27 Rear Axle Housings

Last post by Mark Chaffin « Thu Sep 30, 2021 9:49 pm
Replies: 4
by Mark Chaffin » Wed Sep 22, 2021 10:04 am

First post

Looking to purchase a few non-drain plug side 26/27 rear axle housings for our Ruckstell production. The tube and brake flange need to be in good condition. Can pay $10.00 each. Any help appreciated.. Can pick them up at the Tulare Swap Meet. Mark Chaffin (951) 805 0928.

Last post

Yes. For sure! Hoping to pick a few up at Tulare.

4 Replies

1301 Views

Last post by Mark Chaffin
Thu Sep 30, 2021 9:49 pm
FS Sprint Car Buffalo Wheels, Tires, Hubs/Spindles/Caps

Last post by Henry K. Lee « Thu Sep 30, 2021 4:46 pm
Replies: 2
by Henry K. Lee » Mon Jun 14, 2021 4:09 pm

First post

Three are 20 with lock rings and one is 21 with lock ring for the right front (old school). $3,200.00 Firm. Pick up only, email or text if interested. Sorry the rear hubs are not shown but are there.

IMG_3595.jpeg

IMG_5672.jpeg

All the Best,

Hank

Last post

XXXXXXXXXX

2 Replies

1605 Views

Last post by Henry K. Lee
Thu Sep 30, 2021 4:46 pm
SOLD! FS 1/2 Gallon or 5 Pounds Calcium Carbide

Last post by Henry K. Lee « Thu Sep 30, 2021 4:34 pm
Replies: 2
by Henry K. Lee » Thu Sep 30, 2021 12:46 pm

First post

In a 1 gallon paint can with original label miners grade. $50.00 plus shipping. Email or text if interested.

IMG_5672.jpeg

All the Best,

Hank

Last post

SOLD!, Thanks MTFCA!

2 Replies

937 Views

Last post by Henry K. Lee
Thu Sep 30, 2021 4:34 pm
FS 12 Rivet Converted to Large Drum Rear End and Shortened for a Warford

Last post by Henry K. Lee « Thu Sep 30, 2021 3:08 pm

by Henry K. Lee » Thu Sep 30, 2021 3:08 pm

Absolutely Beautiful! With safety hubs, Rocky Mountain Brakes, new 3:63 to 1 ring and pinion, under truss rods, like new!!!!!! Painted dark blue. $2,500.00 you collect. Email if interested. Sorry for no pictures, wrapped up in plastic.

All the Best,

Hank

0 Replies

748 Views

Last post by Henry K. Lee
Thu Sep 30, 2021 3:08 pm
For sale oil lamp door hinge pin set

Last post by FATMAN « Thu Sep 30, 2021 1:47 pm
Replies: 1
by FATMAN » Wed Sep 29, 2021 2:58 pm

First post

A set of 3 brass oil lamp axle pins for the round type oil lamp lens,
special 6.50 a set plus postage
815-633-7244
modelt2001@comcast.net
Bob

Last post

Sorry wrong place

1 Replies

883 Views

Last post by FATMAN
Thu Sep 30, 2021 1:47 pm
Rajo outside Oil Gauge for sale $180 ppd

Last post by Southfork Creek « Thu Sep 30, 2021 1:28 pm
Replies: 4
by Dropacent » Wed Jul 28, 2021 1:25 pm

First post

I have XXXXXXabout 15 XXXX UPDATE, NOW 6 of these left in the drawer. If you have an interest but not ready, just give me a shout and I’ll have miss Connie put your name on one. You can always change your mind with no hard feelings. Never any pressure here. After that, unlikely more will be made by us. Lost another USA foundry, and the core box...

Last post

I'll take one

4 Replies

1527 Views

Last post by Southfork Creek
Thu Sep 30, 2021 1:28 pm
FS 1915/16 Reproduction Hood and Hood Former/Firewall

Last post by Henry K. Lee « Thu Sep 30, 2021 12:43 pm

by Henry K. Lee » Thu Sep 30, 2021 12:43 pm

Light surface rust from barn storage, comes off easy. Both for $450.00 plus shipping. Email or text if interested.

IMG_5240.jpeg

IMG_5239.jpeg

IMG_4326 2.jpeg

IMG_5672.jpeg

All the Best,

Hank

0 Replies

667 Views

Last post by Henry K. Lee
Thu Sep 30, 2021 12:43 pm
FS Early Flat Top Fenders.., Pie Wagon or Speedster

Last post by Henry K. Lee « Thu Sep 30, 2021 12:40 pm

by Henry K. Lee » Thu Sep 30, 2021 12:40 pm

No running boards or hood former, this is for the front and rear fenders and splash aprons. These are early reproductions of the late 1960's/1970's. Never installed, very light surface rust (barn type) which will come off easy with Evapo-Rust. $1,000.00. You collect or will box up at an extra fee, weigh/dimensions sent to you for your shipping...

0 Replies

692 Views

Last post by Henry K. Lee
Thu Sep 30, 2021 12:40 pm
wtb 21" wire wheel 27 T

Last post by Gary T « Thu Sep 30, 2021 12:24 pm

by Gary T » Thu Sep 30, 2021 12:24 pm

WTB 21 wire wheel for 27 T. Text 8637970724

0 Replies

613 Views

Last post by Gary T
Thu Sep 30, 2021 12:24 pm
'13 Roadster Body Tin (Available at Hershey)

Last post by Benji « Thu Sep 30, 2021 12:00 pm
Replies: 1
by Steve Davis » Tue Sep 28, 2021 11:21 am

First post

!913 roadster sheet metal, complete with correct turtle deck; wood in turtle deck and door good. Hershey spaces GDF 21-23 near lamp post 84 in front of the Giant Center.

Last post

emailed you about the roadster sheet metal.

1 Replies

1080 Views

Last post by Benji
Thu Sep 30, 2021 12:00 pm
WTB Hand Crank Coil Tester / FRAUD ALERT

Last post by MKossor « Thu Sep 30, 2021 9:15 am
Replies: 16
by Mark Chaffin » Tue Sep 21, 2021 11:14 pm

First post

Looking to purchase a good HCCT. TOP Loader preferred. Similar to the one shown below.. Will be attending the Tulare swap meet. Thank you. Mark Chaffin (951) 805-0928.

135405.jpg

Last post

Mark, if the coil tester is for a collection of vintage test equipment, good luck in your pursuit. If the goal is to adjust Model T coils for optimal engine performance, you may wish to consider the ECCT coil tester. More information here: www.modeltecct.com

16 Replies

3329 Views

Last post by MKossor
Thu Sep 30, 2021 9:15 am
NEW 1926/27 Fordor Front Window Regulator Small Gear

Last post by henryford2 « Thu Sep 30, 2021 7:46 am
Replies: 1
by henryford2 » Wed Sep 22, 2021 12:25 pm

First post

I water jet cut these specifically for my 1926 Fordor 4 hole front window regulator, they may fit others but I won't have a clue as to which. You may have to dress the teeth slight to make them burr free, but otherwise it's a very nice water jet cut part. Cut from .125 material as the original, they are NOT hardened so they may wear out in the...

Last post

Back to the top, then back on the shelf

1 Replies

776 Views

Last post by henryford2
Thu Sep 30, 2021 7:46 am
WTB-Waukesha Ricardo Cylinder Head..

Last post by Schweck1914 « Thu Sep 30, 2021 7:18 am
Replies: 3
by Schweck1914 » Wed Sep 29, 2021 6:54 am

First post

WTB Waukesha Ricardo cylinder head in good shape. Must be useable...

Last post

PM sent....

3 Replies

1293 Views

Last post by Schweck1914
Thu Sep 30, 2021 7:18 am
FOR SALE - 1924 CALIFORNIA LICENSE PLATE MATCHED PAIR

Last post by Jay In Northern Ca. « Wed Sep 29, 2021 10:51 pm

by Jay In Northern Ca. » Wed Sep 29, 2021 10:51 pm

These plates are in excellent near new shape and just need to be painted the proper colors for the year. I checked them out with DMV a while back and they were clear in the system. Asking $165 plus postage. When painted these go for $350 + from plate Dealers when available.
1924 plates 1.jpg 1924 plates 2.jpg

Please use this email address...

0 Replies

650 Views

Last post by Jay In Northern Ca.
Wed Sep 29, 2021 10:51 pm
SOLD : NOS MODEL T U-JOINT, $100

Last post by Bill Everett « Wed Sep 29, 2021 10:39 pm
Replies: 1
by RichardW » Wed Sep 29, 2021 12:16 pm

First post

SOLD : NOS MODEL T U-JOINT, $100

Last post

E-mail sent.

1 Replies

961 Views

Last post by Bill Everett
Wed Sep 29, 2021 10:39 pm
Early parts at Hershey

Last post by Larry Debaugh « Wed Sep 29, 2021 9:58 pm

by Larry Debaugh » Wed Sep 29, 2021 9:58 pm

6 rivet rear, 2 piece drive shaft and radius rods $3500, 09/10 steering column w/bracket $1500, Kingston 5 Ball, Holly 4150, Square Hole trans cover, brass lights…. Spaces CM45,46 Larry

0 Replies

947 Views

Last post by Larry Debaugh
Wed Sep 29, 2021 9:58 pm
SOLD - GAS OIL AND DC VOLTAGE DASH GAUGES

Last post by Jay In Northern Ca. « Wed Sep 29, 2021 5:40 pm

by Jay In Northern Ca. » Wed Sep 29, 2021 5:40 pm

Asking $25 for all three plus postage.
3 Gauges.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

0 Replies

699 Views

Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:40 pm
SOLD - COLLECTION OF NINE DIFFERENT DASH MOUNT AMP GAUGES

Last post by Jay In Northern Ca. « Wed Sep 29, 2021 5:34 pm

by Jay In Northern Ca. » Wed Sep 29, 2021 5:34 pm

Asking $50 plus postage.
Nine AMP gauges.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

0 Replies

692 Views

Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:34 pm
SOLD! EXHAUST WHISTLE SETUP WITH CUTOUT AND KICK PEDAL

Last post by Jay In Northern Ca. « Wed Sep 29, 2021 5:29 pm

by Jay In Northern Ca. » Wed Sep 29, 2021 5:29 pm

This is a complete setup with a brand new never used exhaust cutout. Asking $225 plus postage for the setup plus postage.
Exhaust Whistle Setup 1.jpg Exhaust Whistle Setup 2.jpg Exhaust Whistle Setup 3.jpg

Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

0 Replies

717 Views

Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:29 pm
FOR SALE - MISSISSIPPI TRAILER LICENSE PLATES 1953 AND 1954

Last post by Jay In Northern Ca. « Wed Sep 29, 2021 5:12 pm

by Jay In Northern Ca. » Wed Sep 29, 2021 5:12 pm

These are original plates. Asking $25 each plus postage. Mississippi Trailer Plates.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

0 Replies

574 Views

Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:12 pm
Friday Deadline for Hershey Orders

Last post by Retro54 « Wed Sep 29, 2021 1:51 pm
Replies: 1
by Ashley » Wed Sep 29, 2021 1:46 pm

First post

Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!

Last post

Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!

Ashley,
This would be my first year doing so. If I put together...

1 Replies

892 Views

Last post by Retro54
Wed Sep 29, 2021 1:51 pm
MORE OLD FORD PARTS

Last post by RichardG « Wed Sep 29, 2021 1:00 pm
Replies: 3
by RichardG » Tue Sep 28, 2021 11:16 pm

First post

picture #104869 & 70----SET RESTORED 1921 VERMONT PLATES-$75- --- all in picture #104861 $20----- --band link---- hub cap-ford------hub cap ??------oil sight assy-------clear glass dash light lenz -----new gm stop light switch- works with the t.-----all in---picture # 104862 SOLD--three mag plugs-one out side oil plug, --new stop light...

Last post

items in photo 104863---sold, thank you--Shannon--

3 Replies

1601 Views

Last post by RichardG
Wed Sep 29, 2021 1:00 pm
Parting out my 1921 Touring

Last post by Chris Haynes « Wed Sep 29, 2021 12:23 pm
Replies: 1
by Philip Lawrence » Mon Sep 27, 2021 12:04 am

First post

I've decided to part out my 1921 touring project. Disassembly starts tomorrow! If you need something let me know contact me for more information. I plan to sell the body off last unless someone just has to have it sooner.

Last post

Private message sent.

1 Replies

1135 Views

Last post by Chris Haynes
Wed Sep 29, 2021 12:23 pm
Hershey parts!

Last post by bobster1 « Wed Sep 29, 2021 7:59 am
Replies: 2
by bobster1 » Tue Sep 28, 2021 10:07 pm

First post

Hi Folks, Hershey is right around the corner, please come by and visit, I will have Model T Parts, NRS Ford Parts, Curved Dash Olds, some early Buick and other early Brass era things for sale. I have extra chairs, water and conversation!
Regards, Bob Richmon

Last post

Great Chris, look forward to meeting you!

2 Replies

1205 Views

Last post by bobster1
Wed Sep 29, 2021 7:59 am
WTB Gas Cap Gas Gauge

Last post by hddennis « Wed Sep 29, 2021 12:43 am

by hddennis » Wed Sep 29, 2021 12:43 am

Looking for a period gas tank gas gauge for my 1917 Maxwell. I recently saw one on an unrestored Maxwell that I'm assuming was a period aftermarket accessory and am awaiting more details but thought I'd ask if anyone has one they don't know what it fits. It has a circular clock face with a revolving needle set into the cap. Cap has 1 5/8 female...

0 Replies

680 Views

Last post by hddennis
Wed Sep 29, 2021 12:43 am
looking for 26 27 radiator in good condition

Last post by NY John T « Wed Sep 29, 2021 12:22 am

by NY John T » Wed Sep 29, 2021 12:22 am

Hi All,
I'm looking to replace my now useless radiator. I would like to find a good, used, NOT leaking radiator for the 26-27. I will be going to Hershey next week on Thursday and can pick it up then if anyone has one. Please contact me here or at: jkillelea@optonline.net
Thanks.
John

0 Replies

569 Views

Last post by NY John T
Wed Sep 29, 2021 12:22 am
Swap items for sale at HERSHEY!

Last post by Grntea « Tue Sep 28, 2021 8:53 pm
Replies: 1
by Bill Kerndt » Tue Sep 28, 2021 4:27 pm

First post

Gentlemen:
I have a list of things that I and a friend will have at Hershey and I thought I would list them and our location in the event you were interested.
I will be adding to this list as time goes by.

We will be in GBL 29, which is the Green Field and we are close to the Giant Center.

1. Model S Coil with 4 Coils (Approx 1908}

2. Simmons...

Last post

I am interested in your model S coil. Sent you an email and a pm

1 Replies

1142 Views

Last post by Grntea
Tue Sep 28, 2021 8:53 pm
FS Reeder Distributors

Last post by Henry K. Lee « Tue Sep 28, 2021 6:57 pm
Replies: 5
by Henry K. Lee » Tue Jun 29, 2021 4:27 pm

First post

I have 2 very good used ones with all the parts and instructions ready to install. $240.00 each with shipping in the lower 48. Email if interested.

IMG_5743.jpeg

IMG_5672.jpeg

All the Best,

Hank

Last post

Sold, Thanks MTFCA!

5 Replies

2214 Views

Last post by Henry K. Lee
Tue Sep 28, 2021 6:57 pm
19-27 Starter Bendix cover and parts

Last post by Tbird « Tue Sep 28, 2021 4:34 pm
Replies: 2
by Tbird » Thu Sep 23, 2021 8:03 pm

First post

I have a cover and some bendix parts. One of them has a pulley for a belt and is used, the other is new. The Bendix parts do not look like Ford parts. Someone probably knows more about them than I do.

$10 plus shipping
mikebird@lifeattheridge.net or 574-584-6744

IMG_9511.JPG

IMG_9512.JPG

Last post

Thanks will do I’ll just add it to my scrap pile 😂

2 Replies

964 Views

Last post by Tbird
Tue Sep 28, 2021 4:34 pm
Parts taken off my 14

Last post by 12chalmers « Tue Sep 28, 2021 3:26 pm
Replies: 2
by 12chalmers » Tue Sep 21, 2021 4:06 pm

First post

I have replaced the brass radiator, Hood, Texas T water pump and top boot on my 1914 touring. Those parts are for sale. Please email for pictures and price. Jim Williams ewilliam01@msn.com. Thanks

Last post

The Boot and radiator have been sold.

2 Replies

1521 Views

Last post by 12chalmers
Tue Sep 28, 2021 3:26 pm
SOLD: A Nice Original Ford Script Oil Can

Last post by GGZ « Tue Sep 28, 2021 2:23 pm

by GGZ » Tue Sep 28, 2021 2:23 pm

SOLD!

Here is a nice, clean, original example of the popular Ford script oil can. Still has lots of copper plating remaining and the Ford script is nice and sharp.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.

Please email: motoringicons@hotmail.com or call 734-730-4274. I do not check PMs and probably will...

0 Replies

746 Views

Last post by GGZ
Tue Sep 28, 2021 2:23 pm
SOLD: Original "Reduce The Gas Tax" License Plate Topper

Last post by GGZ « Tue Sep 28, 2021 2:20 pm

by GGZ » Tue Sep 28, 2021 2:20 pm

SOLD!

Here is a neat license plate attachment that I am guessing dates from the 1920s or 1930s. It measures 3 by 11 3/4 . It is in very good original condition with nice original paint. A nice piece of automobilia that would great on any early car.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.

Please email...

0 Replies

744 Views

Last post by GGZ
Tue Sep 28, 2021 2:20 pm
TT rims and Wheels (Available at Hershey)

Last post by Steve Davis « Tue Sep 28, 2021 11:15 am

by Steve Davis » Tue Sep 28, 2021 11:15 am

TT wheels and rims, good condition; 20 + 23 inch. Hershey space GDF 21-23 near lamp post 84 in frront of Giants Center.

0 Replies

694 Views

Last post by Steve Davis
Tue Sep 28, 2021 11:15 am
Canopy top for TT fs. Sold

Last post by CTLeonard « Tue Sep 28, 2021 11:04 am

by CTLeonard » Tue Sep 28, 2021 11:04 am

Abe the TT has a canopy top on him he doesn't like, and would like to get rid of. Believe this to be the real deal, some of the stakes have rotted away, but for nothing else it's a great pattern to start with. Has the metal corner brackets.im in mt.vernon in. You would have to pick up.i went through the trouble of getting it off another truck, I'm...

0 Replies

700 Views

Last post by CTLeonard
Tue Sep 28, 2021 11:04 am
A FEW MORE THE THINGS FORD T

Last post by RichardG « Tue Sep 28, 2021 8:50 am
Replies: 1
by RichardG » Mon Sep 27, 2021 7:57 pm

First post

COIL BOX COVER--$10/ QUICK CHANGE BANDS $45 / FENDER BRACKET LOOKS BAD BUR STILL WILLING-$5/ PLUS SHIPPING, INS IS -UP- TO YOU IF YOU WANT IT,

Last post

COIL BOX LID SOLD, THANK YOU KEVIN--

1 Replies

1048 Views

Last post by RichardG
Tue Sep 28, 2021 8:50 am
Free: Frame

Last post by Wayne Sheldon « Tue Sep 28, 2021 4:48 am
Replies: 6
by Philip Lawrence » Sat Sep 25, 2021 8:51 am

First post

I have a 1919 -1920 frame with the forged running board brackets which need to be straightened as they are bent up. The rivets in the front crossmember have been replaced with bolts. If someone can use it they can have it for free. It's located in Auburn, CA . You can call me at 530-five five nine-1440. I also have several very nice frames of...

Last post

Hey there Phil, I haven't seen it. I just looked again.

6 Replies

1618 Views

Last post by Wayne Sheldon
Tue Sep 28, 2021 4:48 am
21--2-3--4--model t parts

Last post by Craig Leach « Tue Sep 28, 2021 1:29 am
Replies: 1
by RichardG » Mon Sep 27, 2021 5:15 pm

First post

steering wheel 16 inch fordite, very good,--$25/ WOODEN DASH ? LOW, GOOD SHAPE--$25/ STEEL DASH W BRACKETS V GOOD LOW, $45/ THREE INCH TIRE TOOL, NO IDEA MAKE OFFER, PLUS SHIPPING--INS EXTRA IF--U--WANT IT,

Last post

Hi Richard I would like to purchase the bands if still available. and have a fiend the needs a wood fire wall for his center door if that one is a fit? The Scandinavia ones.
Craig.
602 769 zero two five seven

1 Replies

967 Views

Last post by Craig Leach
Tue Sep 28, 2021 1:29 am
RE cast iron pistons, changed directions

Last post by Mark Gregush « Mon Sep 27, 2021 10:22 pm

by Mark Gregush » Mon Sep 27, 2021 10:22 pm

cast iron pistons, changed directions.

0 Replies

660 Views

Last post by Mark Gregush
Mon Sep 27, 2021 10:22 pm
21--2-3--4--model t parts

Last post by RichardG « Mon Sep 27, 2021 8:41 pm
Replies: 2
by RichardG » Mon Sep 27, 2021 5:01 pm

First post

BOX FULL OF MODEL T GASKETS, MANIFOLD---HEAD- --TRANSMISSION- -ENGINE----TRANSMISSION RETURN SPRING AND LATCH--$50.00 LOT--/---SMALL BRASS MOTOR METER --$50.00--- ALL--PLUS SHIPPING--INS EXTRA IF -U- WANT IT--

Last post

MOTOR METER AND GASKET SET SOLD--THANK YOU BRAD

2 Replies

1093 Views

Last post by RichardG
Mon Sep 27, 2021 8:41 pm
License plate bracket WTB

Last post by Patrick « Mon Sep 27, 2021 7:55 pm
Replies: 1
by Patrick » Thu Sep 23, 2021 6:56 pm

First post

I am looking for a license plate bracket to use for mounting a right side brake light on my 23 runabout. Please email me if you have one to spare. Edit: I found one at Lang's.
Thanks
Pat Sweeney

Last post

Thanks to those who helped me. I found one at Lang's.

1 Replies

882 Views

Last post by Patrick
Mon Sep 27, 2021 7:55 pm
U&J carburetor venturi and float

Last post by Corey Walker « Mon Sep 27, 2021 7:48 pm
Replies: 2
by Corey Walker » Mon Sep 27, 2021 4:00 pm

First post

New aluminum venturi and float made from closed cell nitrophyl foam. Screws for float will be included. $45 plus $8.45 USPS flat rate box shipping. Email: wlkma9@gmail.com

Last post

Items are sold.

2 Replies

875 Views

Last post by Corey Walker
Mon Sep 27, 2021 7:48 pm
Himico Accessory transmission setup F/S

Last post by Layden Butler « Mon Sep 27, 2021 6:44 pm
Replies: 2
by Layden Butler » Sun Jun 20, 2021 2:19 pm

First post

Unrestored but substantially complete Himico brand accessory engine pan and 3 speed transmission with reverse that replaces the Model T planitary transmission. Happy to answer questions and supply more pictures. Asking $950, prefer pick up here in Northern Cal but can get in a box on a pallet and deliver to your area freight arrangement.

Last post

To the top!

2 Replies

1535 Views

Last post by Layden Butler
Mon Sep 27, 2021 6:44 pm
Antique Clothing PICKED UP

Last post by modeltbarn « Mon Sep 27, 2021 6:18 pm
Replies: 2
by modeltbarn » Wed Sep 22, 2021 10:44 pm

First post

I’ve got a large box of old clothes that my parents wore in the HCCA. Most of these were my moms; she was short, between 5-1 and 5-3, and average size, not heavy at the time. I’d like to pass these on to someone that will use them. Some are true antiques, some are from the 60’s and were made for daytime dresses to wear on tours. There are also...

Last post

These have found a home.

2 Replies

1435 Views

Last post by modeltbarn
Mon Sep 27, 2021 6:18 pm
Holley Model S float

Last post by Corey Walker « Mon Sep 27, 2021 3:53 pm

by Corey Walker » Mon Sep 27, 2021 3:53 pm

2 screw Holley float made from modern closed cell nitrophyl foam. $15 plus $8.45 shipping USPS flat rate box. Email: wlkma9@gmail.com

0 Replies

683 Views

Last post by Corey Walker
Mon Sep 27, 2021 3:53 pm
Need transport

Last post by T Cruiser « Mon Sep 27, 2021 3:26 pm
Replies: 1
by T Cruiser » Sun Sep 26, 2021 3:05 pm

First post

I need a rear end minus tube and arms hauled from Ventura to Tulare swap meet. I will pay a $100.00 to anyone willing to bring it to swap meet. Thanks, Ted 503-728-3476

Last post

I found someone to deliver the rear end. Thanks Ted

1 Replies

769 Views

Last post by T Cruiser
Mon Sep 27, 2021 3:26 pm
Wanted Rajo or Frontenac radiator script

Last post by Southfork Creek « Mon Sep 27, 2021 2:55 pm
Replies: 4
by spedur » Thu Sep 23, 2021 10:28 pm

First post

Im looking to buy a Rajo or Frontenac radiator script, or is any one reproducing them ? contact durocar@aol.com

Last post

Yes Steve. Yours is beautiful. I want that too!!

4 Replies

1217 Views

Last post by Southfork Creek
Mon Sep 27, 2021 2:55 pm
Split Rim Tool #2 FS

Last post by Dan Hatch « Mon Sep 27, 2021 2:52 pm
Replies: 5
by Dan Hatch » Sun Sep 12, 2021 2:40 pm

First post

Another Split Rim tool. This one looks to be NOS. This is an Altas, the king of rim tools. $75.00 + shipping. Email me at address in pictures. Thanks Dan
91BEC9BB-F5E5-4E3B-AEAF-24B82C27FFE6.jpeg
8B709499-0A1D-45C9-AC2C-18EE4278D713.jpeg
B4E42AFE-720A-4CEC-A12D-26D1E8C058C2.jpeg

Last post

Sold pending payment. Thanks

5 Replies

1542 Views

Last post by Dan Hatch
Mon Sep 27, 2021 2:52 pm
Small Drum External Brakes - SOLD

Last post by Craig Leach « Mon Sep 27, 2021 8:57 am
Replies: 3
by OldFord » Sun Sep 26, 2021 12:05 pm

First post

I have a pair of small drum external Model T brakes for sale. I thought they were AC brand, but now not sure. $75. Will be in Hershey C4Y 34-37. 518-755-0986

Frank

Last post

Those look like APCO
Craig

3 Replies

1095 Views

Last post by Craig Leach
Mon Sep 27, 2021 8:57 am
For Sale at Hershey

Last post by Dave Young « Mon Sep 27, 2021 6:48 am
Replies: 1
by Burlingtontguy » Sun Sep 26, 2021 7:40 pm

First post

What do you need for parts with free delivery to Hershey? Send me an e-mail or Call me at 401-932-3191 so I can load the truck, Thanks, Denis

Last post

Dennis. I sent you an email.

1 Replies

1038 Views

Last post by Dave Young
Mon Sep 27, 2021 6:48 am
For Sale: Loads of Model T parts

Last post by Philip Lawrence « Sun Sep 26, 2021 11:49 pm
Replies: 6
by Philip Lawrence » Tue Sep 21, 2021 10:18 pm

First post

After years of collecting parts for different projects that I'll realistically never get to, I've decided to pass these parts on to those that can have a real need for them. Most are chassis parts, frames, front ends, rear ends, engines, and transmissions. There is also a multitude of smaller parts to numerous to mention here.

These parts range...

Last post

Dan, What can I do? She was born under a wandering star. It's really hard to keep up!

6 Replies

2313 Views

Last post by Philip Lawrence
Sun Sep 26, 2021 11:49 pm
Fork mount electric headlamps F/S

Last post by Layden Butler « Sun Sep 26, 2021 3:58 pm

by Layden Butler » Sun Sep 26, 2021 3:58 pm

$175 for this pair, domestic shipping $20.

0 Replies

747 Views

Last post by Layden Butler
Sun Sep 26, 2021 3:58 pm
1926/27 REAR SPRING PERCHES NOS & USED

Last post by henryford2 « Sun Sep 26, 2021 9:24 am
Replies: 1
by henryford2 » Tue Sep 21, 2021 3:52 pm

First post

1 NOS 26/27 rear spring perch and two others well used, for a total of 3 perches and pair of bushings. Perhaps from the 3 you can make a usable pair. They are not reproduced. $65 for all 5 pieces (3 perches, 2 bushings) and that includes shipping in the CONUS. Please respond to jandulics@gmail.com...

Last post

Sunday bump to the top, one is NOS and the others repairable (?) NOT being reproduced so originals are your only option!

1 Replies

929 Views

Last post by henryford2
Sun Sep 26, 2021 9:24 am
Two touring doors For Sale

Last post by fordrelic « Sun Sep 26, 2021 8:19 am
Replies: 1
by fordrelic » Sat Sep 18, 2021 3:41 pm

First post

I have a pair of rear touring doors. Good wood also have hardware, $250 plus shipping. model T touring doors 2.jpg model t touring doors.jpg

Last post

Fall is a super time to drive those T's.

1 Replies

1074 Views

Last post by fordrelic
Sun Sep 26, 2021 8:19 am
Wanted 28x3 tires

Last post by FlyingMerkel « Sun Sep 26, 2021 2:21 am
Replies: 3
by FlyingMerkel » Sat Sep 11, 2021 7:17 pm

First post

I am looking for original 28x3 tires. I’m even interested in tires that are falling apart. I bought a nice set on here but they ended up being newer than I needed.
Please call Daniel
831-278-2742
I have email problems so phone calls are preferred.

Last post

Back to the top

3 Replies

1615 Views

Last post by FlyingMerkel
Sun Sep 26, 2021 2:21 am
Fs 14 engine running $1850

Last post by Nv Bob « Sun Sep 26, 2021 12:49 am
Replies: 3
by Nv Bob » Wed Sep 08, 2021 11:39 am

First post

Looken sell spare 14 engine that a runner
Babbitt good with shims throughout
Low head narrow nose 3 rivet pan
Trans rebiult
Runs on magneto
Kevlar bands
Has ring gear and has starter hogs head with starter not installed currently
Has good manifolds will need pedals carb timer
Asking 1850 obo
.pickup here or figure shipping uship.com good source...

Last post

Going on tbay

3 Replies

1802 Views

Last post by Nv Bob
Sun Sep 26, 2021 12:49 am
1909 1910 Windshield brackets F/S

Last post by Layden Butler « Sun Sep 26, 2021 12:01 am

by Layden Butler » Sun Sep 26, 2021 12:01 am

Nice pair complete with bolts and nuts, these are originals made of steel and brass plated. $225 domestic postage included.

0 Replies

729 Views

Last post by Layden Butler
Sun Sep 26, 2021 12:01 am
Mercury/ ford speedster steering column Brkt for sale

Last post by Southfork Creek « Sat Sep 25, 2021 10:52 pm
Replies: 3
by Dropacent » Wed Mar 04, 2020 3:17 pm

First post

This is a recast steering column support bracket for the mercury bodied speedster. I built it up for use as a foundry pattern, so it has a lot of bondo on it. They were originally made for the T style diamond shape column. It’ll probably need some work, but a good start if you need it. $40 postage paid to you door. Tmorsher@icloud.com to reach me....

Last post

Thanks Tim. CNC machine here I come.

3 Replies

2185 Views

Last post by Southfork Creek
Sat Sep 25, 2021 10:52 pm
For Sale: Engines

Last post by Philip Lawrence « Sat Sep 25, 2021 4:57 pm

by Philip Lawrence » Sat Sep 25, 2021 4:57 pm

I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.

0 Replies

906 Views

Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
For Sale: Engines

Last post by Philip Lawrence « Sat Sep 25, 2021 4:57 pm

by Philip Lawrence » Sat Sep 25, 2021 4:57 pm

I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.

0 Replies

699 Views

Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
Wtb JW brown #16 has bonnet

Last post by Nv Bob « Fri Sep 24, 2021 11:58 pm

by Nv Bob » Fri Sep 24, 2021 11:58 pm

Looking to buy or find some to pull a dent out of a nonmetallic
Jw brown model 16 gas headlight
Contact
Bob
Jalopyt@yahoo.com

0 Replies

685 Views

Last post by Nv Bob
Fri Sep 24, 2021 11:58 pm
WTB T period correct "stop" light

Last post by Dropacent « Fri Sep 24, 2021 10:35 pm
Replies: 3
by speedy19 » Fri Sep 24, 2021 12:49 pm

First post

I am in search of a Model T period correct red stop light assy. if you can help please PM me.
Thanks Steve

Last post

Sold, thanks !

3 Replies

1139 Views

Last post by Dropacent
Fri Sep 24, 2021 10:35 pm
SOLD “The oil your motor craves”SOLD

Last post by Dropacent « Fri Sep 24, 2021 10:00 pm
Replies: 2
by Dropacent » Thu Sep 23, 2021 6:43 pm

First post

Craveroiler SOLD Dandy little accessory for the firewall of your bug. Well made, I’d think swell to keep the top end of that overhead with a little oil, or feed it to your valves through that hole a lot of you have plugged on the intake. Donnie Brown had a big mention of this with his recent resurrection of his original Bug. Tmorsher@icloud.com to...

Last post

Sold, thanks

2 Replies

1179 Views

Last post by Dropacent
Fri Sep 24, 2021 10:00 pm
For Sale: 1909 - 1913 Rear crossmember SOLD

Last post by Michael Paul « Fri Sep 24, 2021 8:14 pm
Replies: 1
by Philip Lawrence » Fri Sep 24, 2021 9:18 am

First post

This early crossmember is is rusty and pitted but can be saved. You can use this to convert your later frame to the earlier style.$100.00 plus shipping.

Last post

I'll take it.
Thanks Mike

1 Replies

813 Views

Last post by Michael Paul
Fri Sep 24, 2021 8:14 pm
For Sale: ( PENDING)APCO Front Spring Setup.(compatible to Hasslers)

Last post by roystoy57 « Fri Sep 24, 2021 3:24 pm
Replies: 4
by roystoy57 » Thu Sep 23, 2021 1:08 am

First post

F7C4B59C-B714-4F32-8270-9A64F7305E0F.jpeg Complete APCO front setup with bushings,pins and spring cradles. $100 plus shipping or can deliver to Hershey.

Last post

Pending sale.

4 Replies

1443 Views

Last post by roystoy57
Fri Sep 24, 2021 3:24 pm
Corcoran 1913-14 Headlamps SOLD

Last post by Layden Butler « Fri Sep 24, 2021 3:18 pm
Replies: 3
by Layden Butler » Wed Sep 15, 2021 4:07 pm

First post

Decent readily restored pair of Corcoran black and brass 1913 1914 Headlamps, never rusty, missing one front glass ( plain window glass), the 2 hose connection elbows do not match, one door has 2 cracks, not dented or ever any repairs, glass reflectors are not cracked. SOLD

Last post

Back to the top with lower price!

3 Replies

1136 Views

Last post by Layden Butler
Fri Sep 24, 2021 3:18 pm
early low Canadian head

Last post by Joe Bell « Fri Sep 24, 2021 3:04 pm

by Joe Bell » Fri Sep 24, 2021 3:04 pm

I have a non script early low T head have been told they where 14's that where casted in Canada, it will not be cheap but if of interest I will haul to Hershey for final inspection.

0 Replies

789 Views

Last post by Joe Bell
Fri Sep 24, 2021 3:04 pm
NEED 2 HAYES DEMOUNTABLE 30 x 3 1/2 RIMS

Last post by TRDxB2 « Fri Sep 24, 2021 2:21 pm
Replies: 3
by avent40 » Fri Sep 24, 2021 6:57 am

First post

Hi everyone, looking for 2 very good rims....hopefully affordable.....I am going to Hershey and can pick them up from you if possible. I appreciate if you can help me out, I am trying to save up and need all new tires and want to do this for the spring. Thanks.

Last post

Be careful in your purchase/ Check for sharp edges on the inner edge of the rimes and elongated bolt holes. Take pictures of what you have - lugs to incase you nee to buy the clamps. I''d even take one for a physical match

3 Replies

1048 Views

Last post by TRDxB2
Fri Sep 24, 2021 2:21 pm
Set of Four Demountable Wheels, Rims and Tires

Last post by Ruxstel24 « Fri Sep 24, 2021 12:12 pm
Replies: 2
by Horsehead » Fri Sep 24, 2021 10:40 am

First post

Converted our '26 Roadster to Model A wire wheels, these are the four wheels and tires removed from the car. $450 for all four, you arrange and pay for Fastenal shipping or pick up in Northern Alabama. Have all the spokes, those on rear wheels need to be pressed back into place, front wheels are intact. One clincher rim is from Hayes and another...

Last post

They are not clinchers....definitely a balloon tire rim.

2 Replies

1109 Views

Last post by Ruxstel24
Fri Sep 24, 2021 12:12 pm
TT Parts To Hershey

Last post by OldFord « Fri Sep 24, 2021 11:31 am
Replies: 3
by OldFord » Fri Sep 24, 2021 10:20 am

First post

I just located 23 TT rear wheels, rims, rings and will have them in Hershey C4Y 34-37. The wheels are solid and have brake drums and wheel locks attached. Extra wheel locks available. Three pairs of rims, one pair good, one pair better, one pair excellent. Also have 4 lock rings for these wheels and one extra rim with a tire on it. Photos...

Last post

Thought I should add photos and pricing:
2 Rear Wheels: Good and solid wood and iron with wheel locks: $200 ea
2 NOS (yes, don't look like they were ever mounted) rear rims: $200 ea
2 Very Good, used rear rims: $150 ea
2 Fair to Good used rear rims: $100 ea
1 Very Good Rim w/Tire: $150
4 Very good rear wheel rings: $50 ea

3 Replies

1094 Views

Last post by OldFord
Fri Sep 24, 2021 11:31 am
Strobospark Coil Tester

Last post by RajoRacer « Fri Sep 24, 2021 10:32 am
Replies: 3
by RajoRacer » Sun Aug 22, 2021 1:14 pm

First post

Wasn't somebody wanting to purchase Strobospark coil tester on here a while back ? I heard of one that is available. Post a reply here & I'll respond.

Last post

Apparently it might be inoperative - should be headed to an expert repairman soon - Bob has first dibs if it's repairable.

3 Replies

1549 Views

Last post by RajoRacer
Fri Sep 24, 2021 10:32 am
Looking for a Ignition switch for a 1923 roadster

Last post by SparkTag « Fri Sep 24, 2021 9:40 am
Replies: 1
by chrisb6064 » Wed Sep 22, 2021 4:21 pm

First post

Hi im looking for a ignition switch for a 1923 roadster preferably a number 51 key

Last post

contact BEN MARTIN, Tucker, Georgia, 770 938 3376. he could sell you a super looking and working switch.. He also has fixed over THOUSAND SWITCHES.

1 Replies

915 Views

Last post by SparkTag
Fri Sep 24, 2021 9:40 am
Nice coil box for sale

Last post by donald4ham « Fri Sep 24, 2021 9:28 am
Replies: 3
by Dropacent » Thu Sep 23, 2021 6:39 pm

First post

Real nice solid coil box. I don’t see much in any issues, nice tight wood, latch springs good, lid stays on tight. The lower part has old aged paint, the married lid looks like it had been cleaned and painted at one point. How about $50 to you door, with Uncle Sam getting about $18 of that? Tmorsher@icloud.com...

Last post

thank you !

3 Replies

1208 Views

Last post by donald4ham
Fri Sep 24, 2021 9:28 am
For Sale: 1914 Steering column SOLD

Last post by Philip Lawrence « Fri Sep 24, 2021 8:59 am

by Philip Lawrence » Fri Sep 24, 2021 8:59 am

This column has the Dodge Brothers stamp. The brass quadrant has very good teeth for the spark and gas levers to ride on. The gear box and cover are also in very good condition and just need polishing. The upper right hand hole on the mounting flange has been enlarged and will need welding to repair it. $425.00 plus shipping

0 Replies

768 Views

Last post by Philip Lawrence
Fri Sep 24, 2021 8:59 am
FS parts

Last post by Nv Bob « Fri Sep 24, 2021 1:29 am

by Nv Bob » Fri Sep 24, 2021 1:29 am

Can include an outlet and straps
$100+ ship
Brass hub fan and arm $75+ ship
Brake rod supports $2

0 Replies

778 Views

Last post by Nv Bob
Fri Sep 24, 2021 1:29 am
1911 Gas Tanks

Last post by Larry Debaugh « Thu Sep 23, 2021 9:20 pm
Replies: 1
by Larry Debaugh » Tue Sep 21, 2021 9:04 pm

First post

2 Available
Clean on the inside
$200 each plus shipping
Can bring to Hershey

Last post

Lighter color tank is sold, other still available, larry

1 Replies

1098 Views

Last post by Larry Debaugh
Thu Sep 23, 2021 9:20 pm
1916-19 Engine Rebuilt

Last post by skeiss « Thu Sep 23, 2021 9:14 pm
Replies: 4
by skeiss » Thu Sep 23, 2021 4:35 pm

First post

FOR SALE
Nicely rebuilt 1916-1919 vintage Model T engine and transmission. .040 over aluminum pistons, new babbit on rods and mains, transmission drums and bands in excellent condition. Starts and runs well. Non-generator set up with starter. This engine was rebuilt as a faux 1913 engine as the serial number and casting date were altered. Has an...

Last post

The engine has been sold pending payment and pickup.
Thank you Perry and MTFCA!

4 Replies

1289 Views

Last post by skeiss
Thu Sep 23, 2021 9:14 pm
Oil Pressure Gauge

Last post by Tbird « Thu Sep 23, 2021 8:04 pm
Replies: 2
by Tbird » Mon Sep 13, 2021 4:50 pm

First post

This is a new Actron G 105 Electrical Oil pressure gauge still in its packaging
$10 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9444.JPG

IMG_9443.JPG

Last post

$5 plus shipping

2 Replies

1148 Views

Last post by Tbird
Thu Sep 23, 2021 8:04 pm
1917 1925 Roadster REAR FENDER IRON PASSENGER SIDE

Last post by rstamand « Thu Sep 23, 2021 7:34 pm

by rstamand » Thu Sep 23, 2021 7:34 pm

Looking to purchase a passenger side rear fender iron for 17-25 roadster. If you have one you can part with please email: rstamand@charter.net

0 Replies

574 Views

Last post by rstamand
Thu Sep 23, 2021 7:34 pm
WTB Spare Tire Carrier for 1919 Roadster - Side Mount

Last post by Don D « Thu Sep 23, 2021 7:30 pm
Replies: 4
by Don D » Wed Sep 22, 2021 11:26 am

First post

Looking for Spare Tire Carrier that is mounted to the driver side running board and top arm bracket for a 1919 Roadster.

Last post

Dennis,

Thanks for the humor however I prefer one that I do NOT have to feed, clean up after and sing to sleep. :-)

The hunt continues!!

Have a great day,
Dom

4 Replies

1159 Views

Last post by Don D
Thu Sep 23, 2021 7:30 pm
More Stromberg adjuster wells available

Last post by Scott_Conger « Thu Sep 23, 2021 5:14 pm

by Scott_Conger » Thu Sep 23, 2021 5:14 pm

While I wait for some metric taps to arrive, I decided to make some more wells today, just to satisfy a couple folks who missed out on my last batch, and to fill up my inventory so that I can box up the tooling for awhile.

As always, I will most certainly respond to EMAIL , not PMs

thanks

IMG_20210912_124519005.png...

0 Replies

642 Views

Last post by Scott_Conger
Thu Sep 23, 2021 5:14 pm
SOLD: 4 Champion Brass Top Spark Plug Insulators/Cores and 1 Priming Cup Spark Plug

Last post by GGZ « Thu Sep 23, 2021 3:32 pm

by GGZ » Thu Sep 23, 2021 3:32 pm

SOLD SOLD SOLD!

Here are four, Champion brass top spark plug insulators. Two are in their original boxes which have 1919 patents dates. They look NOS or hardly used, but I am not positive. Also included is one priming cup spark plug that is in very nice condition.

The price for the group is 125.00 INCLUDING shipping within the USA. Take a look...

0 Replies

693 Views

Last post by GGZ
Thu Sep 23, 2021 3:32 pm
Model T Frame

Last post by T Cruiser « Thu Sep 23, 2021 1:43 pm
Replies: 1
by T Cruiser » Fri Aug 27, 2021 12:19 am

First post

9-12 Sandblasted and primed; some pitting on inside of one rail. $750.00
Picked up, or free delivery to Tulare Swap Meet.

Ted at 503-728-3476.

Last post

Frame has been sold. Thanks, Ted

1 Replies

1273 Views

Last post by T Cruiser
Thu Sep 23, 2021 1:43 pm
Wanted to Buy

Last post by TRDxB2 « Thu Sep 23, 2021 11:43 am
Replies: 3
by Mike Lebsack-Iowa » Wed Sep 22, 2021 12:54 pm

First post

Is there a front wheel Timken-bearing race puller made for Model T wheels and if so does anyone have one for sale? I find myself having an ever increasing need for one. Please let me know and much appreciated. Mike 319-fourthirty, 49 ninety five.

Last post

Found this trick don't know if it will work for your needs
By Kenny Edmondson, Indy on Thursday, March 03, 2011 - 07:42 pm:
I figured I'd let everyone in on a way to easily remove the small outer wheel bearing races on the pre 26/27 hubs. The jaws in the current set up won't fit in the later hubs.
I've been using this procedure for awhile. This...

3 Replies

1354 Views

Last post by TRDxB2
Thu Sep 23, 2021 11:43 am
SOLD demountable rims and wheels ($800)

Last post by Howard,Dayton « Thu Sep 23, 2021 9:22 am
Replies: 4
by Howard,Dayton » Sat Sep 18, 2021 6:05 pm

First post

FS, front and rear wheels - perlman ( aftermarket wheel manufacturer?) Very nice shape, Will pack on pallet free- u pay freight.

Last post

,,,,SOLD,,,

4 Replies

1490 Views

Last post by Howard,Dayton
Thu Sep 23, 2021 9:22 am
26/27 Switch Panels SOLD PP

Last post by Dan Hatch « Thu Sep 23, 2021 5:53 am
Replies: 5
by Dan Hatch » Sun Sep 12, 2021 2:19 pm

First post

Here are some switch panels. Two are 26/27, one is square panel that someone installed a small repro amp meter in. All for ONE money. $49.00 + shipping. Email me at address in pictures. Thanks Dan
9B1985C4-DEB0-4A8B-A091-0A938B095216.jpeg
C19F1B77-7F11-4E7F-9FA5-85EDFBE93749.jpeg
D83AC693-A909-4A36-B185-CAFAC5A61251.jpeg

Last post

Back to the top

5 Replies

1568 Views

Last post by Dan Hatch
Thu Sep 23, 2021 5:53 am
Hays 30x3-1/2 demountable rim

Last post by Allan « Thu Sep 23, 2021 4:21 am
Replies: 1
by tselliott » Tue Sep 21, 2021 2:47 pm

First post

This Rim is in decent shape with no sharp edges.
$40 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

That's the one someone was advertising to buy on Sept 19 on this forum.

Allan from down under.

1 Replies

952 Views

Last post by Allan
Thu Sep 23, 2021 4:21 am
Looking for a wood bed for your roadster??

Last post by Allan « Thu Sep 23, 2021 4:15 am
Replies: 2
by Angmar » Tue Sep 21, 2021 2:02 pm

First post

I saw this on Epay,

I know there are some looking so I wanted to pass it along. No connection.

Last post

It makes it even harder when you do not have the option to make an offer. My guess is it will not sell at $500, but how do you keep track of it? I would not like to try to replicate all the ironwork for the asking price, but it does seem high when the timberwork needs a total replacement.

Allan from down under.

2 Replies

1361 Views

Last post by Allan
Thu Sep 23, 2021 4:15 am

New Topic

19830 topics

Page 94 of 199
- Jump to page:
Previous
1
…
92
93
94
95
96
…
199
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum