Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 44414 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
Brass plate holder. Sold
Replies: 1
by
CTLeonard » Wed Jun 09, 2021 10:54 am
First post
20.00 plus shipping IMG_20210609_085940518.jpg IMG_20210609_085953558.jpg IMG_20210609_085931278.jpg
Last post
I will take if still available . wpgoble@hotmail.com
- 1 Replies
- 823 Views
-
Last post by Perry Goble
Wed Jun 09, 2021 11:56 am
-
-
Cams
by
CTLeonard » Wed Jun 09, 2021 11:05 am
Two cams for sale.one has the timing gear- the other has front and center bearings. 55.00 each plus shipping IMG_20210609_100224115.jpg
- 0 Replies
- 665 Views
-
Last post by CTLeonard
Wed Jun 09, 2021 11:05 am
-
-
WTB Engine stand adapter
Replies: 4
by
Art Ebeling » Tue Jun 08, 2021 11:47 am
First post
WTB an engine stand adapter for a Model T engine. Thanks, Art
Last post
I just got a call back from Birdhaven and they found one for me and have sent it out. Brent, Thanks for answering. Art
- 4 Replies
- 1515 Views
-
Last post by Art Ebeling
Wed Jun 09, 2021 10:11 am
-
-
FS RUCKSTELL PARTS
Replies: 3
by
Mark Chaffin » Sun Jun 06, 2021 2:35 pm
First post
Ruckstell parts. Description, prices and shipping are as indicated below. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951) 805-0928
Ruckstell Parts Lot 1.jpg
Parts Lot #1. Good usable parts. Price is $300 plus $19.80 shipping. SOLD
Ruckstell Parts Lot 2.jpg
Parts Lot #2. Good usable parts. Price is $300 plus...
Last post
Lot #1 sold to John.
- 3 Replies
- 1082 Views
-
Last post by Mark Chaffin
Wed Jun 09, 2021 9:35 am
-
-
WTB - 5Z-197 Rear Spring Perch Wrench
Replies: 2
by
Scott_Conger » Fri May 21, 2021 11:57 am
First post
Please see photo (courtesy Kim Dobbins) for the wrench I am seeking...it is one of the larger Z tools made and will stand out in your pile of wrenches you're thinking about selling... :D
thank you
5Z-197 Rear Spring Perch Wrench.jpeg
Last post
bump for the week
- 2 Replies
- 1225 Views
-
Last post by Scott_Conger
Wed Jun 09, 2021 9:34 am
-
-
WTB - Stevens Front Axle Thrust Face Mill
Replies: 5
by
Scott_Conger » Fri Apr 23, 2021 11:06 am
First post
These photos courtesy of MTFCA Forum/Kim Dobbins:
Stevens Front Axle Thrust Face Mill.jpg Stevens Front Axle Thrust Face Mill1.jpg
Last post
bump for the week
- 5 Replies
- 1859 Views
-
Last post by Scott_Conger
Wed Jun 09, 2021 9:34 am
-
-
WTB Timing Cover Bolt for 26-27
Replies: 2
by
MKossor » Tue Jun 08, 2021 10:14 pm
First post
Need replacement bolt for 1927 Timing cover - Top center (See photo below) 1/2 x nf thread x 1.25 long. Please email with cost plus shipping if you have one. Thank you, Mike email: mictel@comcast.net
Missing 1927 Timing Cover Bolt.jpg
Last post
Thanks Adam, that will be plan B if I can't get the 11/16 thick head original bolt.
- 2 Replies
- 925 Views
-
Last post by MKossor
Wed Jun 09, 2021 6:58 am
-
-
More early stuff to Auburn!
Replies: 6
by
Michael Paul » Thu Jun 03, 2021 11:13 pm
First post
Loading lots of great stuff, 1909 to 1911 . I think there is enough to build a 1911 touring. Body, firewall, fenders, steering column, windshield, axels, lights . I even have a kit with wheels axels and hubs to make a Model T run on a standard gauge R R.
1925 C cab flatbed with all of the bells and whistles, ( high speed rear end, + overdrive )...
Last post
Hi Bill, sorry no buggy rail. If something shows up I'll let you know.
- 6 Replies
- 2324 Views
-
Last post by Michael Paul
Tue Jun 08, 2021 11:16 pm
-
-
FS 1909-11 cylinder head
Replies: 2
by
KimDobbins » Tue Jun 08, 2021 8:25 pm
First post
Real 1909-11 head. Been repaired and looks like there is another crack. Can be fixed. $35.00 plus shipping kdmks AT .att.net
Last post
I'll take it Kim.
- 2 Replies
- 1157 Views
-
Last post by Herb Iffrig
Tue Jun 08, 2021 10:45 pm
-
-
WTB: 5012-T Tumbler
Replies: 1
by
jaybee47 » Tue Jun 08, 2021 11:17 am
First post
WTB: Ignition switch tumbler assembly, part number 5012-T, with or without keys. My original crumbled Ignition switch tumbler.jpeg .
Last post
Got lucky and found one :D
- 1 Replies
- 792 Views
-
Last post by jaybee47
Tue Jun 08, 2021 5:54 pm
-
-
- 0 Replies
- 851 Views
-
Last post by Layden Butler
Tue Jun 08, 2021 1:26 pm
-
-
WTB buggy rail, parts or patterns
Replies: 10
by
KimDobbins » Fri May 28, 2021 9:00 pm
First post
Wanted any buggy rails for 1909-10 Ford's. Also interested in any parts, pieces or patterns. Kdmks AT att.net
Last post
Don, I sent you an email on the buggy rail. Kim
- 10 Replies
- 2455 Views
-
Last post by KimDobbins
Tue Jun 08, 2021 12:17 pm
-
-
Main bearing linebore unit Model T and A Ford
Replies: 1
by
Gene_French » Tue Jun 08, 2021 8:55 am
First post
linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $875 plus $75 priority...
Last post
Note :
Model T main bearing mold is sold separately
- 1 Replies
- 743 Views
-
Last post by Gene_French
Tue Jun 08, 2021 9:33 am
-
-
- 0 Replies
- 764 Views
-
Last post by bobster1
Tue Jun 08, 2021 6:56 am
-
-
Misc and brackets. $25 & free shipping in the continental USA
by
Adam » Mon Jun 07, 2021 7:42 pm
A box of T parts I bought for just two parts had this stuff in it too. Everything in this picture for $25 plus Free Shipping inside the continental USA. Email only. No PM’s please. First email gets it.
25CE9C86-64BA-420F-89F5-9C581538096A.jpeg
- 0 Replies
- 838 Views
-
Last post by Adam
Mon Jun 07, 2021 7:42 pm
-
-
Nice clincher demountable rim for sale.
Replies: 8
by
Dropacent » Fri Apr 30, 2021 2:39 pm
First post
UPDATE. THE HAYES RIM HAS BEEN SOLD, STILL HAVE THE OTHER NICE ORPHAN SEEKING ITS FOREVER HOME , NEW PRICE. $75 ! the rim is very nice. It is a Firestone, I think. Look it up to be sure. The one one the right has had the inner lip shortened, probably because of a sharp edge. I’d say it would work well for a trailer queen, a spare that isn’t...
Last post
Rim sold. Thanks!
- 8 Replies
- 2465 Views
-
Last post by Dropacent
Mon Jun 07, 2021 6:10 pm
-
-
WTB Morton & Brett radiator shell
Replies: 2
by
t-time » Mon Jun 07, 2021 12:12 pm
First post
Looking for a radiator shell and hood for a pre polyform fiberglass Morton & Brett speedster body.
Last post
I have Whippet radiator and shell rwill1914@aol.com
Richard
- 2 Replies
- 1057 Views
-
Last post by RichardW
Mon Jun 07, 2021 3:00 pm
-
-
WTB...1924-25 pickup bed
Replies: 1
by
Runabout » Fri Jun 04, 2021 3:51 pm
First post
Looking for a good early Ford steel pickup bed, nothing rotten I want a solid bed. Text or email is best form to contact me, if you call please leave a message and reference T truck bed.
423-284-9750. Thanks Steve.
Last post
Found...Thanks...
- 1 Replies
- 840 Views
-
Last post by Runabout
Mon Jun 07, 2021 2:54 pm
-
-
Model T Ford Front Spring with Shackles $30.00
by
Goldstar » Mon Jun 07, 2021 1:01 pm
Model T Ford Front Spring with Shackles $30.00
I have a front Model T Ford Spring with Shackles for $30.00. It is for local pickup in Richmond, Indiana. You can pick them up at my house or I would be happy to deliver them to you at the Model T Ford Homecoming at the Model T Ford Museum in Richmond on Saturday June 19, 2021. I live approximately 2...
- 0 Replies
- 780 Views
-
Last post by Goldstar
Mon Jun 07, 2021 1:01 pm
-
-
Round Fuel Tank
Replies: 2
by
Henry K. Lee » Mon Jun 07, 2021 7:00 am
First post
I have no connection, just trying to help someone looking for it.
Hank
Last post
90$ shipping?? 😳
- 2 Replies
- 1222 Views
-
Last post by dmdeaton
Mon Jun 07, 2021 12:48 pm
-
-
- 0 Replies
- 686 Views
-
Last post by Layden Butler
Mon Jun 07, 2021 12:26 pm
-
-
Re-conditioned Model T connecting rods
Replies: 14
by
Gene_French » Tue Apr 20, 2021 10:26 am
First post
i have several sets of -.020 and standard diameter re-conditioned Model T connecting rods ... these are from the same batch of old stock rods that i listed several weeks ago , these are obsolete inventory from a long ago closed auto parts store ... i do not know the re-builder , but the rods appear to be of very high quality ,they are X grooved...
Last post
Hey Gene,
I will take one of these sets standard X grooved connecting rods and one set of standard main bearings.
I will send you an email to comfirm this.
Andre
Belgium
- 14 Replies
- 5862 Views
-
Last post by AndreFordT
Mon Jun 07, 2021 12:12 pm
-
-
Re-babbitted main bearing caps,laminated shim set
by
Gene_French » Mon Jun 07, 2021 9:31 am
For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...
- 0 Replies
- 633 Views
-
Last post by Gene_French
Mon Jun 07, 2021 9:31 am
-
-
FS roadster car cover
Replies: 1
by
KimDobbins » Sun Jun 06, 2021 6:25 pm
First post
Very gently used 26-27 roadster car cover. It should fit all years roadsters. $85.00 plus shipping. Kdmks AT att.net.i
Last post
Car cover is sold.
- 1 Replies
- 765 Views
-
Last post by KimDobbins
Mon Jun 07, 2021 9:29 am
-
-
- 0 Replies
- 696 Views
-
Last post by Henry K. Lee
Mon Jun 07, 2021 7:03 am
-
-
SUNDAY SWAP MEET
Replies: 10
by
Mark Chaffin » Sun Jun 06, 2021 2:27 pm
First post
Good morning everyone. Welcome to the weekly Sunday Swap Meet. Descriptions, prices, and shipping are as indicated below. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951) 805-0928.
20210606_104539.jpg
1. Exhaust manifold (new) $55.00 plus $15.50 shipping. SOLD
2. Snyder’s Foot Accelerator Kit (new) $25.00...
Last post
The ball on the steering arm is near new.
- 10 Replies
- 1845 Views
-
Last post by Mark Chaffin
Mon Jun 07, 2021 12:03 am
-
-
Wanted Brake Shoes and springs
Replies: 1
by
BobShirleyAtlantaTx » Sun Jun 06, 2021 8:06 pm
First post
This is for a 15 I’m going to sell, need a nice set. Thanks, Bob at 903 Eight24 1949. Thanks
Last post
I have a good used lined set, $80.00 with shipping.
Email if interested.
Hank
- 1 Replies
- 714 Views
-
Last post by Henry K. Lee
Sun Jun 06, 2021 8:53 pm
-
-
Wtb driver’s side engine pan 11-12
by
Model T Mark » Sun Jun 06, 2021 7:43 pm
I am looking for a driver side engine pan the one that has the steel cup that covers the commutator lever. Last part needed to finish a 11 torpedo restoration. I’m a very capable metal man. Trying to get he car finished for an aaca show July 4 in Auburn Ind. meyre14t@yahoo.com
- 0 Replies
- 600 Views
-
Last post by Model T Mark
Sun Jun 06, 2021 7:43 pm
-
-
Ring gear
Replies: 4
by
Joe Bell » Sun Jun 06, 2021 12:54 pm
First post
I was at an airport getting fuel today and noticed the gear on the drum to rewind the hose back up was a T rear axle ring gear and the 12 tooth pinion was on the driven side, this was an 80's fuel truck, who would of thought them still being used!!
Last post
P & H electric cranes in foundries use Model T Ford small brake drums too! Really!
Hank
- 4 Replies
- 1266 Views
-
Last post by Henry K. Lee
Sun Jun 06, 2021 7:05 pm
-
-
WTB 1926/27 Ruckstell Housing
Replies: 3
by
henryford2 » Sun May 30, 2021 7:32 am
First post
like the title says, in need of a good ready to use 1926/27 Ruckstell housing. Prefer to deal here before I go to the internet. Thanks, have a safe and rest full holidays and fly your flag!!
Last post
Found one, thanks Andy Loso!
- 3 Replies
- 1210 Views
-
Last post by henryford2
Sun Jun 06, 2021 5:07 pm
-
-
Adjustable Pinion Bearing Assembly Availability ???
Replies: 6
by
henryford2 » Sun Jun 06, 2021 9:00 am
First post
My go to vendors (Langs & Chaffins) do not have these in stock and when they'll become available is unclear. Snyders (another go to vendor) does have the new assembly (that does not need a core). Question is, am I missing anyone when it comes to wanting to use a modified original assembly, or is this just another example of the current reality...
Last post
Thanks, earlier today I had gotten confirmation from Chaffin's that they are in the works and should be available soon! Years ago I used a setup from Eugene Wright that sandwiched the bearing races between 2 spacers that held them tight once everything is tightened down. It's been a while but if I remember correctly it eliminated the need to...
- 6 Replies
- 1339 Views
-
Last post by henryford2
Sun Jun 06, 2021 3:07 pm
-
-
- 0 Replies
- 636 Views
-
Last post by Mel King
Sun Jun 06, 2021 3:02 pm
-
-
Deal of the day I. Sold
Replies: 1
by
CTLeonard » Tue May 25, 2021 3:39 pm
First post
I have a raytech av18 tumbler for sale carburetor guys could be interested in this. Deburrs descales polishes.ive had it a number of years; it just doesn't get used.i don't believe it has an hour run time on it. Just called raytech- the price today is 610.00.it can come your way today for 325.00 plus shipping IMG_20210525_141545096_HDR.jpg...
Last post
Lower price!! 225.00 plus shipping
- 1 Replies
- 1269 Views
-
Last post by CTLeonard
Sun Jun 06, 2021 12:25 pm
-
-
Wanted Champion #34 sparkplugs
Replies: 3
by
WornOut » Sat Feb 20, 2021 8:12 am
First post
Wanted four new Champion #34 sparkplugs.
Thanks
Chaeley
Last post
Mark, thanks for the reply.
Charley
- 3 Replies
- 1343 Views
-
Last post by WornOut
Sun Jun 06, 2021 9:05 am
-
-
FS E & J "1908" "Black & Brass" Tail Lights for 1913-1914 Fords
Replies: 5
by
Rodger Erickson » Sun May 23, 2021 6:12 pm
First post
For sale: Another E & J Patented 1908 Black & Brass tail light, correct for 1913 and possibly early 1914. Original glass, with reproduction fount and reflector. Burner not included. It has been stripped and should be ready for paint without too much trouble. There are a couple of dings in the back, it is not a perfect light but overall quite nice....
Last post
Spoken for.
Thanks MTFCA
- 5 Replies
- 1583 Views
-
Last post by Rodger Erickson
Sat Jun 05, 2021 8:34 pm
-
-
- 3 Replies
- 1214 Views
-
Last post by Bill Crosby
Sat Jun 05, 2021 8:23 pm
-
-
Portable power unit Chassis and wheels.
Replies: 4
by
Brent Mize » Fri Jun 04, 2021 2:29 pm
First post
Model T Ford portable power unit chassis. Use your old Model T engine and radiator to build a fun power unit or engine display. This unit has been fully powder coated (cost $250.00). Price firm at $650, that’s what I have in it.This ad is for chassis and wheels only. Model T Pan is not included. Can deliver to Richmond, Indiana on June 18th.
Last post
The chassis is sold.
Thanks MTFCA!
- 4 Replies
- 1488 Views
-
Last post by Brent Mize
Sat Jun 05, 2021 8:05 pm
-
-
- 0 Replies
- 759 Views
-
Last post by Layden Butler
Sat Jun 05, 2021 5:47 pm
-
-
Early parts at Auburn, mostly 09-10
Replies: 8
by
RGould1910 » Tue Jun 01, 2021 6:45 pm
First post
I will be liquidating my collection of early parts, mostly 1909-10 at the Auburn Swap meet this coming Sunday. Most parts are in excellent restored or unrestored condition.
The parts include
A Ray Wells body with top, upholstery and side curtains by Ernie Romero. Included are Rootlied front and rear fenders splash apron and a hood. The body...
Last post
Looking to see old friends and make new ones. Please stop by and introduce yourself. I'll in the spaces next to the fence just behind the concession area.
Richard Gould and Bette
- 8 Replies
- 2619 Views
-
Last post by RGould1910
Sat Jun 05, 2021 3:55 pm
-
-
WTS Rebuilt Holly G Carb---SOLD
Replies: 6
by
Caswell » Thu Jun 03, 2021 1:36 pm
First post
For Sale, Holley G Carb , brass body, brass top, steel bowl, original venturi (perfect), new (NOS) idle pick up tube, venturi clip,
new float (modern material), new float valve, new gaskets with correct size manifold gasket. PayPal F&F contact for info.
Last post
Item is SOLD
- 6 Replies
- 1437 Views
-
Last post by Caswell
Sat Jun 05, 2021 1:28 pm
-
-
No Longer Needed - Brass Oval Head Slotted Machine Screws -
Replies: 6
by
CudaMan » Fri Jun 04, 2021 5:35 pm
First post
Hello, I am looking for some brass, oval head, slotted machine screws for the side lamp brackets on my 1912 Flanders 20. The thread size is 5/16-18 and minimum length is 1-1/4 inch. I can cut down longer ones if necessary. I am looking for at least four, but will take more if you have them.
I searched on line and can get them in stainless steel,...
Last post
Thank you all for your replies. Yes, I did check all of the major (and many obscure) fastener suppliers. Thank you also to the folks who sent emails expressing concern about using brass for such a structural and fatigue prone application.
I found some made of stainless steel and some made of silicon bronze, both are on their way, so I think I'm...
- 6 Replies
- 1466 Views
-
Last post by CudaMan
Sat Jun 05, 2021 8:06 am
-
-
Early rear frame cross member 09-13
Replies: 2
by
John Haynes » Thu Jun 03, 2021 7:07 pm
First post
For Sale is an early rear frame cross member for 09-13 with the body brackets included. Asking $120.00 plus shipping. Please contact by email.
Last post
SOLD. Thank you MTFCA and thank you Michael!
- 2 Replies
- 1034 Views
-
Last post by John Haynes
Fri Jun 04, 2021 11:57 pm
-
-
WTB REAR AXLE HOUSINGS
by
Mark Chaffin » Fri Jun 04, 2021 11:12 pm
Hello all. We are in need of 26/27 rear axle housings (non-drain plug / driver's side) for our Ruckstell housing production. If you are local and have a few in good condition you could part with, please give me a call Mark Chaffin (951) 805-0928.
- 0 Replies
- 751 Views
-
Last post by Mark Chaffin
Fri Jun 04, 2021 11:12 pm
-
-
WTS, Accessory spare rim holder SOLD
Replies: 2
by
Caswell » Fri Jun 04, 2021 12:08 pm
First post
For Sale,
Rear spare clincher rim/wheel holder, push bar in center locks rim on holder, works as it should.
Looking for best offer (now until 9 pm Eastern tonight) plus actual shipping, message or email.
Thread going in general topic above about carrier.
Last post
SOLD pending payment
- 2 Replies
- 751 Views
-
Last post by Caswell
Fri Jun 04, 2021 9:14 pm
-
-
Timing Cover
Replies: 1
by
tselliott » Thu Jun 03, 2021 1:30 am
First post
19-25 Timing Cover. Bead blasted. No cracks
$25 plus shipping.
Scott Elliott
971-5O6-94O2
Last post
$20 OBO plus shipping
- 1 Replies
- 934 Views
-
Last post by tselliott
Fri Jun 04, 2021 7:24 pm
-
-
Coil Box Switch
Replies: 1
by
Will_Vanderburg » Fri Jun 04, 2021 1:52 pm
First post
Does anybody have a need or desire to have this? It is doing no good in my parts stash as I do not own a T that uses it.
$5 bucks to you and I'll mail it in a padded envelope. (That's the cheapest way, as a flat rate box will cost $9 dollars).
send me a PM Thanks!
Last post
SOLD pending payment
- 1 Replies
- 658 Views
-
Last post by Will_Vanderburg
Fri Jun 04, 2021 4:28 pm
-
-
Portable power unit Chassis and wheels.
by
Brent Mize » Fri Jun 04, 2021 2:31 pm
Model T Ford portable power unit chassis. Includes pulley and bearing. Use your old Model T engine and radiator to build a fun power unit or engine display. This unit has been fully powder coated (cost $250.00). Price firm at $650, that’s what I have in it.This ad is for chassis and wheels only. Model T Pan is not included. Can deliver to...
- 0 Replies
- 779 Views
-
Last post by Brent Mize
Fri Jun 04, 2021 2:31 pm
-
-
Spindle Bushing reamer Fs
Replies: 1
by
Dan Hatch » Fri Jun 04, 2021 9:06 am
First post
I found another combo spindle and tie rod bushings reamer that is extra to me. $ 50.00 + shipping. Email me at address in pictures.
BAD07C1A-D4F1-4897-BF73-FEC3B6850E1B.jpeg
E5AE4D34-A75C-4659-9E91-D13DED5FC555.jpeg
98824CBE-7705-436F-9278-D8E803EB371B.jpeg
Last post
Sold pending payment. Thanks Dan
- 1 Replies
- 649 Views
-
Last post by Dan Hatch
Fri Jun 04, 2021 1:32 pm
-
-
1910-11 Kingston 5-Ball For Sale $1400
Replies: 4
by
Ratfink56 » Sun May 30, 2021 5:36 pm
First post
This is a complete Kingston 5-Ball carburetor for the 1910 1911 Model T. Please see the pictures for condition. Very hard to find carburetor. I am asking $1400 OBO. Thank you P1240724.JPG P1240723.JPG P1240722.JPG P1240721.JPG
Last post
It has been sold. Thank you MTFCA
- 4 Replies
- 1289 Views
-
Last post by Ratfink56
Fri Jun 04, 2021 1:02 pm
-
-
Tranny gear shaft
by
CTLeonard » Fri Jun 04, 2021 10:52 am
50.00 plus shipping IMG_20210604_093530884.jpg IMG_20210604_093537459.jpg IMG_20210604_093524701.jpg
- 0 Replies
- 536 Views
-
Last post by CTLeonard
Fri Jun 04, 2021 10:52 am
-
-
This will tell your age
Replies: 2
by
CTLeonard » Fri Jun 04, 2021 10:33 am
First post
Antique ford country M-533 600w oil in the one quart can full. 25.00 plus shipping IMG_20210604_092548663.jpg IMG_20210604_092529140.jpg IMG_20210604_092533367.jpg IMG_20210604_092521889.jpg
Last post
Yes it is sir
- 2 Replies
- 929 Views
-
Last post by CTLeonard
Fri Jun 04, 2021 10:49 am
-
-
Stevens Front Axle Inserts FS
Replies: 8
by
Dan Hatch » Fri Apr 16, 2021 3:55 pm
First post
Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded
Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...
Last post
Back to the top
- 8 Replies
- 2231 Views
-
Last post by Dan Hatch
Fri Jun 04, 2021 9:07 am
-
-
Timing gear setFS
Replies: 2
by
Dan Hatch » Mon May 31, 2021 11:50 am
First post
Here is a set of cast iron timing gears that were in some stuff I brought. Look good and they were matched together marked good. New large gears are over $70.00.
This pair is $50.00 + shipping. Look at pictures. Email me at address in pictures. Thanks Dan
E06D305E-13A1-4E52-AFBF-AB7111E0736D.jpeg
05EC1F99-E1C9-4618-ADC2-A9A160717579.jpeg...
Last post
Back to the top
- 2 Replies
- 911 Views
-
Last post by Dan Hatch
Fri Jun 04, 2021 9:06 am
-
-
No longer for sale - Stromberg LF
Replies: 4
by
Scott_Conger » Tue Jun 01, 2021 9:12 pm
First post
To the extent that I am able, this ad is removed with no sale
Last post
Neil
I am very sorry and have replied to your email with an explanation.
- 4 Replies
- 1280 Views
-
Last post by Scott_Conger
Thu Jun 03, 2021 10:35 pm
-
-
WTS Coil box with 4 coils
Replies: 1
by
Caswell » Thu Jun 03, 2021 10:07 pm
First post
For Sale, Coil box that needs cleaning and paint, wood is shot. Brass clips and bolts are good, glazed insulators are good with no chips or cracks. Coils are all working but need setting, interesting mix. Asking $60 shipped (lower 48) PayPal F&F contact for info. Pictures in two posts.
Last post
5 more pictures
- 1 Replies
- 706 Views
-
Last post by Caswell
Thu Jun 03, 2021 10:10 pm
-
-
WTB early round style fender eyebolts
by
Bill Elliott » Thu Jun 03, 2021 8:55 pm
I am searching for a pair of the early round style fender eyebolts for my 1910 T. Last I checked the venders were on permanent backorder with no restock date, so if anyone has an extra set let me know! I did try using the later oval style but they are not long enough to accept the nut.
- 0 Replies
- 667 Views
-
Last post by Bill Elliott
Thu Jun 03, 2021 8:55 pm
-
-
Bosch distributor. Sold
Replies: 4
by
CTLeonard » Thu May 27, 2021 12:36 pm
First post
I really know nothing about this.say 65.00 plus shipping IMG_20210527_113028405.jpg IMG_20210527_113038310.jpg IMG_20210527_113127477.jpg IMG_20210527_115430205.jpg
Last post
Distributer arrived, looks great. Thanks Mike.
Craig.
- 4 Replies
- 1274 Views
-
Last post by Craig Leach
Thu Jun 03, 2021 8:28 pm
-
-
1913 Ford Block
Replies: 2
by
ModelTRoadster » Thu Jun 03, 2021 6:00 pm
First post
Very good block, standard bore, no cracks. $450 plus freight. Call 585-738-1988, no solicitations please.
Last post
...Just had its 108th birthday......
- 2 Replies
- 1162 Views
-
Last post by TXGOAT2
Thu Jun 03, 2021 8:18 pm
-
-
- 5 Replies
- 1754 Views
-
Last post by dmdeaton
Thu Jun 03, 2021 6:51 pm
-
-
WTB 26 Carburetor adjustment rod
Replies: 6
by
MAG » Sun May 23, 2021 7:45 pm
First post
WTB – Carburetor adjustment rod for 26 Coupe. Must have good to excellent aluminum knob. Measures approximately 27” bottom of knob to end of rod OR 27 5/8” full length. Two-five-six-4-4-4-one-4-six-3 or email me markpaulagember and that’s at aol.com
Last post
We make the rods, Bob
- 6 Replies
- 1591 Views
-
Last post by FATMAN
Thu Jun 03, 2021 4:31 pm
-
-
Roadster body for sale
Replies: 7
by
KimDobbins » Wed Jun 02, 2021 11:58 pm
First post
I think the seat is early Ford, not sure about the base section, $850.00. Located in so cal. Kdmks At att.net.
Last post
Yes, as I remember, Seekon told me it was off a tourabout.
- 7 Replies
- 1912 Views
-
Last post by ModelT46
Thu Jun 03, 2021 3:51 pm
-
-
26-27 water outlet with fan
by
CTLeonard » Thu Jun 03, 2021 3:47 pm
26-27 water outlet with a 25-27 4 blade fan.65.00 plus shipping IMG_20210603_144012203.jpg IMG_20210603_144008292.jpg IMG_20210603_144052082.jpg
- 0 Replies
- 510 Views
-
Last post by CTLeonard
Thu Jun 03, 2021 3:47 pm
-
-
WTS Accessory tail lights SOLD
Replies: 2
by
Caswell » Thu Jun 03, 2021 12:06 pm
First post
For Sale, two lights on one bracket, stop light has blue glass (no cracks or chips) back side of glass is marked Jefferson 2265, lights up word STOP with thin border around edge, red light glass has no cracks or chips, just replaced the celluloid panel for license plate illumination . Some dents shown in picture. $65 shipped , PayPal F&F contact...
Last post
Sold pending payment
- 2 Replies
- 708 Views
-
Last post by Caswell
Thu Jun 03, 2021 12:19 pm
-
-
1926/27 Tail light body needed.
Replies: 7
by
OilyBill » Tue Jun 01, 2021 8:03 pm
First post
Looking to buy a 1926/27 Tail light body. I don't need the support bracket, just the round housing, lens, etc. Basically everything that attaches above the bracket. I have restored the one for the L/H rear fender, and it is installed, but now I need to find one for the R/H fender, as the owner wants a second tail-light on the car for safety sake....
Last post
I seem to be blundering through this exchange, but need an address so I can get the tail light on it’s way to you. Give me a call at 801-3896966
- 7 Replies
- 1716 Views
-
Last post by Ron Horton
Thu Jun 03, 2021 11:03 am
-
-
WTB early 12 engine pan nose cone.
Replies: 19
by
Michael A » Mon May 31, 2021 10:37 am
First post
WTB early good original 12 engine pan nose cone if any can assist would be appreciated.
Thanks Michael A
Last post
Thanks Ed, I have made contact. Tough ask from here.
Cheers
- 19 Replies
- 2807 Views
-
Last post by Michael A
Wed Jun 02, 2021 9:27 pm
-
-
E & J brass carbide generator F/S
Replies: 5
by
Layden Butler » Mon May 03, 2021 3:11 pm
First post
Original all brass E & J brand carbide generator, yes it is missing the running board bracket and has dents and cracks but is great as is for an unrestored car or certainly can be restored. Can package for domestic or worldwide shipping. Can supply more pictures and happy to answer any questions.
Last post
$700 cash money, no tax and free delivery to Auburn Swap Meet!
- 5 Replies
- 2242 Views
-
Last post by Layden Butler
Wed Jun 02, 2021 6:38 pm
-
-
1915 Engine transmission Frame Ruckstell FS Santa Cruz
Replies: 15
by
FlyingMerkel » Mon May 24, 2021 10:19 am
First post
I have a 1915 block with a narrow pan and transmission, also included is several buckets of the original hardware. The cylinders will need to be bored and the deck surfaced, one bold is broken off in the head and will need to be removed. Overall it’s a nice looking block, no cracks that I can see or repairs.
There’s also a ruckstell axel, I...
Last post
Block is sold
- 15 Replies
- 3282 Views
-
Last post by FlyingMerkel
Wed Jun 02, 2021 12:20 pm
-
-
WTB low radiator shell
Replies: 2
by
MAG » Sun May 23, 2021 7:41 pm
First post
WTB – Good to excellent low radiator shell. No cracks or repairs. Two-five-six-4-4-4-one-4-six-3 or email me markpaulagember and that’s at aol.com
Last post
I have a couple Mark, I will have to get them down off the wall and take a picture.
Dave
- 2 Replies
- 926 Views
-
Last post by Ruxstel24
Wed Jun 02, 2021 9:51 am
-
-
Set of Five 1910 Lights
Replies: 1
by
T Cruiser » Mon Apr 26, 2021 4:41 pm
First post
New, never mounted. Lights cost $400.00 each, and burners were $159.00 each; and are no longer being made. Sell all for $2000.00. Will take them to Bakersfield meet.
Call Ted at 503-728-3476.
Last post
Lights are sold,Thanks, Ted
- 1 Replies
- 1333 Views
-
Last post by T Cruiser
Tue Jun 01, 2021 11:35 pm
-
-
WTB Universal Tire 30x3-1/2 white/off white
Replies: 2
by
jaybee47 » Sun May 23, 2021 12:03 pm
First post
Per picture. To be used as a spare. Most likely will never be mounted onto wheel. Good used or NOS. 30x3.1-2 tire for Model T Centerdoor.jpeg
Last post
Jay, I may have what you need.
See ur email.
- 2 Replies
- 916 Views
-
Last post by TWrenn
Tue Jun 01, 2021 9:41 pm
-
-
For Sale - Stevens T-231 Drive Shaft Bushing Puller
by
Scott_Conger » Tue Jun 01, 2021 8:50 pm
I recently purchased a complete kit and now my single tool is surplus to my needs and thus is for sale. This is not an easy tool to find and frequently has either seized pawls or the spring is broken (or both). I purchased this as a broken tool and wound a new stainless steel music wire spring for it and installed it. It has very snappy action now...
- 0 Replies
- 700 Views
-
Last post by Scott_Conger
Tue Jun 01, 2021 8:50 pm
-
-
1926-7 hood, excellent survivor
Replies: 4
by
Dropacent » Tue Jun 01, 2021 11:07 am
First post
Just an excellent hood. Mine original had bumps,bruises and a couple creases, so I’ve upgraded twice now, seeking a better one. This one is a dandy. It’s actually too good as a survivor, and I just cannot pull the trigger to repaint it. One very small spot on the hood latch area is the only flaw. No tears at the hinges, no creases, I’m thinking...
Last post
It will not get painted 😁
- 4 Replies
- 1085 Views
-
Last post by dmdeaton
Tue Jun 01, 2021 6:19 pm
-
-
WTB: Touring Car Roof -New or Used?
by
Fozz71 » Tue Jun 01, 2021 3:38 pm
I wanted to see if anyone has an old roof that was taken off a car in workable shape, or an old kit sitting on a shelf? I am working on a 1925 Star Touring car and want to try and adapt a T roof to it just for some summer shade.
If anyone has anything, or parts to a roof, please contact me. Jim 630-608-3978 call/text.
- 0 Replies
- 640 Views
-
Last post by Fozz71
Tue Jun 01, 2021 3:38 pm
-
-
1926-7 front valance w/ trim
by
Dropacent » Tue Jun 01, 2021 11:10 am
Nice looking front valance $75. Tmorsher@icloud.com 2A2A7DA3-A668-485D-B098-1C424C5767E2.jpeg 91510510-A051-4B66-8A0A-1A05EB659C98.jpeg F957FEA9-AFB8-41C7-9548-25ED4FA89FA1.jpeg
- 0 Replies
- 586 Views
-
Last post by Dropacent
Tue Jun 01, 2021 11:10 am
-
-
changed my mind for now.
Replies: 8
by
Caswell » Sun May 02, 2021 9:58 pm
First post
changed my mind for now.
Last post
If you have the body send me a message. I would love to buy it for my 23 Chassis. I already have a Hack Body done by Everett Currier. Want to have a Touring Body to change out when I feel the need. Kinda like Lego Blocks for big kids.
Bryan
- 8 Replies
- 2354 Views
-
Last post by Channel1tv
Mon May 31, 2021 7:48 pm
-
-
Waukesha Ricardo head for sale
Replies: 7
by
Dropacent » Sat May 29, 2021 2:45 pm
First post
Tmorsher@icloud.com to reach me. Waukesha Ricardo head for sale. It has the very common freeze crack along the bump on top professionally repaired with lock&stitch $450 for the head. I’m showing with petcocks ,whistle and nickeled head bolts to show what bling you can bring to the thing ! I can sell those blingy thingys separately. To discuss or...
Last post
Sold, thanks!
- 7 Replies
- 1979 Views
-
Last post by Dropacent
Mon May 31, 2021 6:55 pm
-
-
Brass horn repair guy?
Replies: 6
by
Oldav8tor » Sun May 30, 2021 8:46 pm
First post
Can anyone recommend someone who can make minor repairs to my brass taxi horn? The mounting bracket needs to be brazed (?) on and the reed re-soldered to the tube. 3CF9A170-1C1B-4F73-B45A-B948DC769A6C.jpeg
Last post
I got it at Hershey. Has a nice bracket for attaching it. It’s only purpose is to gently warn people when giving rides around our local museum grounds, etc. I’ve done a lot of electrical soldering, not something like this.
- 6 Replies
- 1499 Views
-
Last post by Oldav8tor
Mon May 31, 2021 2:33 pm
-
-
FS- McMillan Overhead Valve Cylinder Head Casting
Replies: 14
by
Dan McEachern » Thu Apr 29, 2021 9:39 pm
First post
This is a very nice partially machined aluminum overhead valve cylinder head casting. The deck and top surface have been surfaced and the head bolt holes are drilled. There are no visible welds or repairs - It is a cross flow, 2 port intake, 4 port exhaust design. I've had this on the shelf for way too long and it needs to go to a new home, get...
Last post
Hi Gene- There has to be a running McMillan head out there somewhere- hopefully someone can provide information. There was a completed head at Bakersfield Swapmeet many years ago,so they are around- somewhere!!!!
- 14 Replies
- 3751 Views
-
Last post by Dan McEachern
Mon May 31, 2021 12:09 pm
-
-
E-Timer Alert
Replies: 14
by
MKossor » Tue May 25, 2021 4:12 pm
First post
E-Timer stock is almost depleted, only a few remaining. If anyone was planning to get one for this Touring season may wish to act sooner than later. Here's the Link:
Investigating the possibility of another production run but facing component obsolescence issues (The design is now 10+ years old if you can believe it). Unlikely they will be in...
Last post
He out of stock now.
- 14 Replies
- 3419 Views
-
Last post by Quickm007
Mon May 31, 2021 10:33 am
-
-
Wanted: Warner Autometer swivel drive and cable
Replies: 2
by
Alex Dragone » Sun May 30, 2021 2:31 pm
First post
I know this is not exactly model T, but maybe someone here has a Warner speedo swivel drive and cable they would sell. Please let me know if so. Thanks!
Last post
Hello Harry, I have attached a photo of a Warner swivel. They are identifiable because they are cast aluminum and the cable has a male end that plugs into the swivel and is held in with a set screw. No threads
- 2 Replies
- 991 Views
-
Last post by Alex Dragone
Mon May 31, 2021 9:18 am
-
-
WTB/rent front end rebuild tools
Replies: 1
by
catfishunter99 » Sun May 30, 2021 9:45 pm
First post
I need to replace the spindle and tie rod bushings on my 14. All the necessary tools really add up for the limited use they'll see. Posting to see what's available used or if anyone is interested in renting. I will need the drivers and reamers for both. Let me know. Thanks!
Last post
Or do like I do and run them down to your local engine/machine shop. I really am glad that's the route I decided. I just had them re-bush that God-awful steering bracket that 99% of the Ts need to have done. It's not a job for the average guy, just like the crank handle bushing. Now my steering on the Fordor is totally perfect. Just had them do...
- 1 Replies
- 781 Views
-
Last post by TWrenn
Mon May 31, 2021 9:10 am
-
-
1917-1926 Schrader Wood Wheel Metal Stem Dust Covers
by
henryford2 » Mon May 31, 2021 8:09 am
Absolutely NOT very knowledgeable about these. I'm using the vendors catalogs to identify these by shape not size. Set of 4, each 2 1/2 tall, they have the leather washer present in three (one missing). Nickel plated with the right patina that makes me believe they are original rather than reproductions ? I've priced them below the catalog prices...
- 0 Replies
- 672 Views
-
Last post by henryford2
Mon May 31, 2021 8:09 am
-
-
SUNDAY SWAP MEET
Replies: 10
by
Mark Chaffin » Sun May 30, 2021 2:49 pm
First post
Good morning all! Like most of you and your families, we are enjoying spending the long weekend in remembrance of those who made the ultimate sacrifice. Without their selfless dedication, this nation would not exist as we know it. We thank all those who have been lost for your service.
I must admit I was on the fence about posting the Sunday...
Last post
#9 sold to John.
- 10 Replies
- 2216 Views
-
Last post by Mark Chaffin
Sun May 30, 2021 11:43 pm
-
-
- 3 Replies
- 1107 Views
-
Last post by John iaccino
Sun May 30, 2021 8:55 pm
-
-
1909-1913 Rear Crossmember
Replies: 4
by
ModelTRoadster » Sat May 29, 2021 6:56 pm
First post
For sale! $120.00 plus shipping. Contact 585-738-1988. No solicitations please.
Last post
It will be sold pending receipt of payment.
Thank you for your interest.
- 4 Replies
- 1351 Views
-
Last post by ModelTRoadster
Sun May 30, 2021 6:54 pm
-
-
- 0 Replies
- 613 Views
-
Last post by C_smith
Sun May 30, 2021 11:20 am
-
-
FS: Judging Guidelines
Replies: 1
by
SurveyKing » Sat May 29, 2021 5:56 pm
First post
Up for sale are both the 4th and 6th edition of the MTFCI Judging Guidelines in binders. Lots of good information here despite the age, 4th was printed in 1997 and 6th in 2013. (The 7th edition is now selling for $49.95)
$20 for the 4th edition; $30 for the 6th or both for $40 all plus shipping in medium flat rate box = $15.50 Judging 4th .jpg...
Last post
Guidelines are SOLD, Thank you MTFCA!
- 1 Replies
- 921 Views
-
Last post by SurveyKing
Sun May 30, 2021 8:35 am
-
-
ATTN: TIM MORSHER
Replies: 31
by
fordgood1 » Thu May 27, 2021 12:44 pm
First post
Tim, this is Steve Francois. As regarding the two Ruxtell washers I ordered and sent you a check (#7952) for $45, I never received the washers. I sent the check to you on 5/9/21 and the check was cashed on 5/17/21. Please send me the red fiber washers or refund the $45. Thank you.
Last post
I have had conversations with Tim before and I think he is a gentleman and a very pleasant converationalist,but, I also know Steven and he is a very nice old gentleman who unfortunately didn’t think his email through before posting it. Frank
- 31 Replies
- 5082 Views
-
Last post by Sarikatime
Sat May 29, 2021 3:24 pm
-
-
early brass horn
Replies: 19
by
Scott Rosenthal » Sun Apr 11, 2021 11:12 am
First post
WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg
Last post
Eye candy!
- 19 Replies
- 4596 Views
-
Last post by Tbird
Sat May 29, 2021 3:13 pm
-
-
Model T Windshield
Replies: 4
by
Unprr » Thu May 20, 2021 8:03 pm
First post
I have , Model T windshield. Don’t know the year but it is in great condition. I would like to get it out of my storage and will take offers.
To reduce shipping cost, I would remove the glass, since it’s not safety glass. if the buyer is OK with that.
George Schmidt
Unprr@cox.net
Last post
Email sent
- 4 Replies
- 1421 Views
-
Last post by Caswell
Sat May 29, 2021 12:20 pm
-
-
Wanted: 1/16" pipe carburetor drain
Replies: 4
by
KWTownsend » Fri May 28, 2021 9:27 pm
First post
I need a brass carburetor drain that threads in with a 1/16 pipe thread. This is the type:
20210528_180314.jpg
Or like this:
20210528_180408.jpg
Stan was looking for me, but...
Please dig through your brass fittings and see what you have.
Thank you!
Keith
Last post
F9A2CAB7-ECCD-4870-B137-7D7E169F0657.jpeg
- 4 Replies
- 961 Views
-
Last post by Dropacent
Sat May 29, 2021 11:47 am
-
-
Model T Engine Stand
Replies: 24
by
hkraft1 » Tue May 25, 2021 9:31 am
First post
Original Model T Engine Stand. Saved decades ago by Henry Austin Clark Jr. and was at the Long Island Automotive Museum until he passed. From there it came to me and I have had it since. I've never seen one like it and if Clark saved it, then it was certainly a rare piece and worth saving.
If you have any questions let me know!
Open to offers....
Last post
Wonder where it is now. My friend with me that year was so glad it was not for sale. 😅
- 24 Replies
- 4817 Views
-
Last post by Dan Hatch
Sat May 29, 2021 11:14 am
-
-
WTB: Metal Stems and Bridge Washers
by
SurveyKing » Sat May 29, 2021 9:40 am
I would like to buy several original Schrader 777 metal stems for tubes along with original style bridge washers with the ridge. Please email me at: danielsnell2@twc.com
- 0 Replies
- 725 Views
-
Last post by SurveyKing
Sat May 29, 2021 9:40 am
-
-
1915 coil box and new switch.
Replies: 1
by
Runabout » Sun Dec 13, 2020 1:30 pm
First post
1915 coil box and new switch with key, original box and round corner one piece lid, box needs cleaned up. $385 plus shipping.
The switch alone is right at $300 new.
Thanks Steve. 423-284-9750
5450A06D-9DFE-4A42-BA7E-790F700E722A.jpeg FC28909E-E761-4A22-8D12-47372289C4A1.jpeg
Last post
...........
- 1 Replies
- 977 Views
-
Last post by Runabout
Sat May 29, 2021 3:27 am
-
-
FS. Early Studebaker Cowl lights
Replies: 2
by
Runabout » Fri Dec 18, 2020 8:01 pm
First post
Nice set of sidelights for an original car or a good addition to any speedster. $125 plus shipping. 423-284-9750
C817775C-ACFA-4B1E-BF98-60C426FE696E.jpeg 0C31A561-C7B7-4E34-BACE-4E1C1CA1A71B.jpeg
Last post
............
- 2 Replies
- 1277 Views
-
Last post by Runabout
Sat May 29, 2021 3:23 am
-
-
1912 Wisconsin license plate.
Replies: 9
by
Runabout » Sun Dec 13, 2020 1:54 pm
First post
Early 1912 Wisconsin tag/license plate.Excellent condition! $300 plus shipping.
Thanks, Steve. 423-284-9750
4A6E8083-E46D-4DBC-AF57-23CF29C75B42.jpeg
Last post
..........
- 9 Replies
- 2567 Views
-
Last post by Runabout
Sat May 29, 2021 3:21 am
-
-
FS. Good restorable black era side-lamps.
Replies: 4
by
Runabout » Fri Dec 18, 2020 8:05 pm
First post
Set of 3 side lamps good shape 2 side 1 tail lamp. $275 plus shipping. 423-284-9750
166F0AD3-85C1-4F12-8ECE-734716A4FB3B.jpeg 2564B1FB-E147-4401-B9F4-614BC3C8FBB4.jpeg
Last post
............
- 4 Replies
- 1558 Views
-
Last post by Runabout
Sat May 29, 2021 3:20 am
-
-
Solid triple gears
Replies: 3
by
CTLeonard » Thu May 27, 2021 1:26 pm
First post
Tried to show the bad in photos. 75.00 plus shipping IMG_20210527_121833060.jpg IMG_20210527_121728666.jpg IMG_20210527_121745656.jpg IMG_20210527_121608585.jpg IMG_20210527_121620879.jpg
Last post
I believe there is both rust and wear damage. The wear damage is typically right across some of the teeth. I see far more one piece gears worn like this, likely to be a product of the load being applied to the narrower gear teeth on one piece gears. I much prefer to use the three piece gears with the full width teeth, providing they have not run...
- 3 Replies
- 1185 Views
-
Last post by Allan
Sat May 29, 2021 2:07 am
-
-
1917-23 Front Fender FS
by
Mark Osterman » Fri May 28, 2021 6:45 pm
I have a pretty solid front fender for sale. It did have some pitting in the area near where it connects to the running board and I had a steel plate welded underneath to strengthen it. Would need some filler to make it pretty but it’s a good fender for a driver. Email me if interested and I’ll send pictures. $200 plus post. Markosterman@icloud.com
- 0 Replies
- 673 Views
-
Last post by Mark Osterman
Fri May 28, 2021 6:45 pm
-
-
FS: Pair Brass 3 tiered Cowl Lamps
Replies: 4
by
George House » Mon May 24, 2021 1:31 pm
First post
....complete except for wicks. No name and no cracks in brass. Red ‘light’ rear of both. Left side has 1 cracked glass. Nice matched pair only $250 + FedEx. Advertised here before HCCA guys. Need more pics ? gwhouse73(one)(at)gmail.com
Last post
Are these lights still available?
- 4 Replies
- 1011 Views
-
Last post by fordzzz
Fri May 28, 2021 4:39 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum