Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 44241 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
FS ACCESSORY OIL BREATHER CAP (SOLD)
Replies: 6
by
Mark Chaffin » Thu Mar 14, 2024 5:39 pm
First post
Accessory flip-top oil breather cap. Cast aluminum. Price is $75.00 with free domestic shipping. Mark Chaffin (951) 805-0928
OILER 1.jpg
Last post
Sold to Shannon. Thank you
- 6 Replies
- 396 Views
-
Last post by Mark Chaffin
Mon Mar 18, 2024 8:52 pm
-
-
FS: New EGGE High Compression Pistons
Replies: 3
by
TPrez1923@aol.com » Mon Mar 18, 2024 4:49 pm
First post
For Sale: New in the box set of Egge high compression pistons for stock Model T rods with full set of Grant piston rings. Asking $250.00 OBO, plus shipping.
Last post
That's what the box states - STD.
- 3 Replies
- 115 Views
-
Last post by RajoRacer
Mon Mar 18, 2024 8:32 pm
-
-
FS Original 1926-27 Ford script horn w/ bracket
Replies: 2
by
Larry » Mon Mar 18, 2024 3:08 pm
First post
Very nice original 1926/27 Ford script horn with its original bracket. Older restoration w/ some paint chips. Has been sitting on the shelf. Just tested and it works perfectly.
$125 + shipping
IMG_6975.jpeg
IMG_6973.jpeg
IMG_6972.jpeg
Last post
Sold, Payment Pending.
Thank you.
- 2 Replies
- 133 Views
-
Last post by Larry
Mon Mar 18, 2024 8:07 pm
-
-
Mossberg Automobile Chime
by
ThreePedalTapDancer » Mon Mar 18, 2024 6:42 pm
Original Mossberg Automobile Jitney Chime. This is a very rare form of Bermuda bell, made by the Frank Mossberg Company in the 1900s. It is chrome plated, which means late 20s manufacture most likely. It is a precision, beautiful bell, made with the same quality of the firearms of the time. It appears to be very lightly used, with little to no...
- 0 Replies
- 80 Views
-
Last post by ThreePedalTapDancer
Mon Mar 18, 2024 6:42 pm
-
-
FS Holley NH Straight Through Carburetor
Replies: 1
by
MAG » Mon Mar 18, 2024 2:24 pm
First post
This was never used and is excess to my needs. The carburetor was fully rebuilt by Bruce Compton. $325 shipped to your door. Email me at markpaulagember AT aol DOT com
Last post
SOLD awaiting payment
- 1 Replies
- 155 Views
-
Last post by MAG
Mon Mar 18, 2024 6:24 pm
-
-
FS WIRING HARNESS SET (26/27)
by
Mark Chaffin » Mon Mar 18, 2024 6:20 pm
Complete wiring harness set for the improved Fords (26/27). One 5031B Commutator wiring loom. One 5041E Lighting wire loom and one 5042B Ignition wiring loom. Excellent quality. New in the original packaging from Sacramento Vintage Ford. Retail for all would be $130. Get this set for $100 with free domestic shipping included. Mark Chaffin (951)...
- 0 Replies
- 57 Views
-
Last post by Mark Chaffin
Mon Mar 18, 2024 6:20 pm
-
-
WTB Winshield Support Rods for a '12
Replies: 2
by
Bill Everett » Fri Mar 15, 2024 5:20 pm
First post
I'd like to buy the two brass support roads for a '12 windshield.
Do the vendors offer this item?
Or, do you have a set you'd part with?
Please let me know.
Thanks.
Bill Everett
Cell: 901-496-8795
Last post
bill i have the brass Rands windshield brace rods. They are really nice. I also have the mounting clamps that secure the rods to the front fender irons
if interested text me at 410 241 4584 dan Mari
- 2 Replies
- 139 Views
-
Last post by RedDogPilot
Mon Mar 18, 2024 5:19 pm
-
-
WTB: 1912 Torpedo Roadster Brass windshield support rods
Replies: 3
by
michaelb2296 » Mon Mar 11, 2024 5:17 pm
First post
Anybody have a pair of originals? For a Rand's windshield ....
Thanks for your assistance,
Michael
Last post
michel , i reproduce the Rands and Automatic brass rods, also the mounting clamps that secure the rods to the fender irons. if interested text me at 410 241 4584. Dan Mari
- 3 Replies
- 321 Views
-
Last post by RedDogPilot
Mon Mar 18, 2024 5:08 pm
-
-
WTB: WIDE-TRACK Drag-Link
by
Stephen1915 » Mon Mar 18, 2024 3:16 pm
I am in need of a nice wide track drag link for my 1916 Coupelet, would rather look for a nice one before making one. Also looking for any other wide track parts in nice condition.
Please Call 314-287-1901
- 0 Replies
- 64 Views
-
Last post by Stephen1915
Mon Mar 18, 2024 3:16 pm
-
-
FS. Large collection of model T service bulletins.
Replies: 3
by
Larry » Mon Mar 18, 2024 2:39 pm
First post
For Sale.
Large collection of model T service bulletins.
There are 80 on the list in the first picture. Those bulletins are in the binder on the right side (2nd picture). The additional stack on the left side of the binder are different service bulletins. I am assuming the majority of those ones are reprints from around 50 years ago. they are not...
Last post
IMG_6988.jpeg
IMG_7029.jpeg
- 3 Replies
- 86 Views
-
Last post by Larry
Mon Mar 18, 2024 2:44 pm
-
-
FS Another 6 Fluted Oil Cap – Steel no Script
Replies: 1
by
MAG » Wed Jan 24, 2024 9:23 pm
First post
Here is another 6 fluted original steel oil cap. Plain top. (1915-16) $35 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com
Last post
back to the top
- 1 Replies
- 270 Views
-
Last post by MAG
Mon Mar 18, 2024 2:26 pm
-
-
WTB Rear Depot Hack Fenders
by
Jim D » Mon Mar 18, 2024 2:26 pm
Both left and right Depot Hack rear fenders for 1922 Cantrell body. Must have two bolt hole mounting tab to attach to running board. Must be restorable by an amateur sheet metal worker with average skills!
- 0 Replies
- 42 Views
-
Last post by Jim D
Mon Mar 18, 2024 2:26 pm
-
-
FS Rear Hub Puller
by
MAG » Mon Mar 18, 2024 2:26 pm
This is a Presto Rear Hub puller for a Ford Model T. It is in good condition and works as it should. All threads are crisp and clean. $40 and $10 shipping. Email me at markpaulagember AT aol DOT com
- 0 Replies
- 84 Views
-
Last post by MAG
Mon Mar 18, 2024 2:26 pm
-
-
- 2 Replies
- 81 Views
-
Last post by michaelb2296
Mon Mar 18, 2024 2:21 pm
-
-
WTB: 1912 Torpedo tool box. 28x11x11
Replies: 15
by
michaelb2296 » Wed Mar 13, 2024 6:21 pm
First post
I'm getting really close now... I almost have every part I need. If someone can help me out with a 1912 Torpedo Roadster tool box, that would be AWESOME !!!!! Thank You !!!!
Last post
Thanks for all the offers but i committed already to buy Johns!
Thanks Everyone! You’re the best!
Michael
- 15 Replies
- 560 Views
-
Last post by michaelb2296
Mon Mar 18, 2024 2:19 pm
-
-
F.S. NEW 3:1 OR 3.25:1 39 Tooth Ring Gear
by
Stephen1915 » Mon Mar 18, 2024 1:52 pm
I have a perfect new, never been used, 39 tooth stepped ring gear made by Mark auto. You can use two different pinions with this ring gear to have either the three to one ratio or the 3.25 to 1 ratio. I can send pictures on request. If I don’t have them posted shortly, please call do not email. Ring gear only!
$325
314-287-1901
- 0 Replies
- 83 Views
-
Last post by Stephen1915
Mon Mar 18, 2024 1:52 pm
-
-
FS: Wire Wheel Hubcap Wrenches. Buffalo, Dayton, Kissel
by
WaltM » Mon Mar 18, 2024 11:35 am
For sale wire wheel hubcap wrenches. Dayton wrench (top wrench) measures 2-3/4 between flats. Price $150 plus shipping. Buffalo wrench (middle one) measures 2-3/4 inches between flats. Price $150 plus shipping. Kissel wrench (bottom wrench) measures 2-3/8 inches between flats. Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
- 0 Replies
- 87 Views
-
Last post by WaltM
Mon Mar 18, 2024 11:35 am
-
-
WTB - “Right Side”-mount Rube Horn
by
NorthSouth » Mon Mar 18, 2024 11:20 am
-
I am looking for a “right side” mount Rube horn that is the mirror image of this one. Hopefully, in good shape. Would anyone have one for sale?
If needed, I have a good left side one to trade.
Steven
three 2 three then 497 then zero 6 and zero 1
-
IMG_1100.jpeg
- 0 Replies
- 46 Views
-
Last post by NorthSouth
Mon Mar 18, 2024 11:20 am
-
-
REDUCED! FS Model T 15" Brass DB Steering Wheel
Replies: 4
by
Ratfink56 » Wed Mar 13, 2024 3:41 pm
First post
Early 15 cast brass original Model T steering wheel with the Dodge Brothers stamp. The top side is in excellent condition. The bottom has a few minor marks from being removed in the past. After all it is over 100 years old. Please see the pictures or condition. Lowered to $350 plus the ride
Last post
I’ll take it !!!!!!
- 4 Replies
- 467 Views
-
Last post by michaelb2296
Mon Mar 18, 2024 11:17 am
-
-
FS: TT Emergency Brake and Cross Shaft…
Replies: 5
by
George House » Fri Mar 08, 2024 1:48 pm
First post
….including taller cam. In excellent shape to include handle spring. Found a TT trailer and want to build a
truck ? You need this $75 system. Might have to find a very, very large pizza looking box for shipping. Plus FedEx
actual costs.
Last post
Rec’d 2 emails this item. sale on hold
- 5 Replies
- 348 Views
-
Last post by George House
Mon Mar 18, 2024 10:59 am
-
-
FS t hub pullers
by
Karl Von Neumann » Mon Mar 18, 2024 10:50 am
Ugly hub pullers all need work in some way ugly rusty stuck bolts missing bolts etc $40 each plus the ride
- 0 Replies
- 83 Views
-
Last post by Karl Von Neumann
Mon Mar 18, 2024 10:50 am
-
-
- 0 Replies
- 69 Views
-
Last post by Karl Von Neumann
Mon Mar 18, 2024 10:47 am
-
-
The best carburetor shut off valve you'll ever buy
Replies: 14
by
Scott_Conger » Thu Feb 29, 2024 3:37 pm
First post
Nickle plated brass ball valve (made in Italy) that due to it's construction, has the best throughput of any valve available
all brass construction of USA made fittings - NO COPPER line to fatigue or damage when tightening onto the carb (the removable connection is a double-ferrule design which is an industry standard industrial fitting designed...
Last post
Could this be hidden near the gas tank, say on a Torpedo roadster?
- 14 Replies
- 1701 Views
-
Last post by Herb Iffrig
Mon Mar 18, 2024 9:23 am
-
-
WTB Texas T VW Distributor
Replies: 4
by
J1MGOLDEN » Sun Mar 17, 2024 4:55 pm
First post
My Texas T VW Made in China VW Style Distributor is so worn the points can hardly function and open.
About 20 years ago, I had the same situation and sent the distributor back to Texas Ts for a rebuild.
I got one back that looked and worked like new, but that is no longer an option.
The real Bosch plastic parts are also getting difficult to...
Last post
Les, I'm interested, just remove the rotor and wiggle the shaft to see how much play there is across from the point contact area.
Then send me some contact information.
- 4 Replies
- 208 Views
-
Last post by J1MGOLDEN
Mon Mar 18, 2024 7:49 am
-
-
Reduced - Complete set of Dayton clincher wire wheels
Replies: 1
by
neilson604 » Sat Feb 10, 2024 8:08 pm
First post
Set of 5 Dayton clincher rims, hubs, and hubcaps in very good condition. Everything here has seen very little use. Rims have old paint and very little rust. They are flat, spokes tight, pin drive in good undamaged condition. Hubs are excellent, no rust or wear. Hubcaps with good original nickle, little wear. Missing hub for spare wheel.
5 48 spoke...
Last post
These wheels are now $6500 us
- 1 Replies
- 586 Views
-
Last post by neilson604
Mon Mar 18, 2024 1:51 am
-
-
Early Aluminum Hood on Facebook Marketplace
by
ModelTWoods » Mon Mar 18, 2024 12:40 am
There is an early aluminum hood ( riveted hinges to panels and no louvers ) on Facebook Marketplace in San Antonio, Texas. This means it was used between late 1909 up to 1912, according to the MTFCA Encyclopedia. Photo shows only minor straightening needed along the front and rear edges. Price was $100.00 if I remember correctly. I have no...
- 0 Replies
- 153 Views
-
Last post by ModelTWoods
Mon Mar 18, 2024 12:40 am
-
-
- 1 Replies
- 201 Views
-
Last post by JTT3
Sun Mar 17, 2024 10:32 pm
-
-
Last Call! E-Timer, I-Timer and ECCT Coil Tester
Replies: 1
by
MKossor » Fri Mar 15, 2024 6:32 pm
First post
The present production run of E-Timer, I-Timer and ECCT is almost sold out. Inventory is limited but suggest ordering soon if anyone was considering these items for the upcoming touring season.
Production costs have increased significantly (just like everything else) so there will be a price increase for the 2024 production run.
Last post
I still haven't wore out my first one yet! These things seem to not wear very fast so it seems like someday everyone will have one and there will be no market for them ??
Do you have any updated models coming?
- 1 Replies
- 385 Views
-
Last post by SurfCityGene
Sun Mar 17, 2024 9:10 pm
-
-
for sale
by
T-Brass » Sun Mar 17, 2024 6:50 pm
For sale FAKE made up not original 1909-1910 front axle very correct. LATER one piece spindles. This is a
made up front axle and later one piece spindles. Seven hundred and fifty dollars or best offer. will trade for 1912
parts. thank you. Anthony
- 0 Replies
- 341 Views
-
Last post by T-Brass
Sun Mar 17, 2024 6:50 pm
-
-
- 0 Replies
- 106 Views
-
Last post by T-Brass
Sun Mar 17, 2024 6:36 pm
-
-
Hand pump panel mount F/S
by
Layden Butler » Sun Mar 17, 2024 6:34 pm
Hand air pump to pressurize a gas tank, originally intended for a wooden instrument panel, works $125; New pressure gauge 2 1/2 diameter, $25. 48 state shipping $10.
- 0 Replies
- 135 Views
-
Last post by Layden Butler
Sun Mar 17, 2024 6:34 pm
-
-
Angle Mount Dash Clock F/S
by
Layden Butler » Sun Mar 17, 2024 5:34 pm
Made to mount on a vertical wooden dash as on a brass era Model T, takes off and runs when wound but should go off to the shop for cleaning and lube.
Nickel plated brass, rim wind and rim set. Will need a mounting bracket made for it, the bracket is hidden by the clock housing when mounted. $125, 48 state delivery $10.
- 0 Replies
- 140 Views
-
Last post by Layden Butler
Sun Mar 17, 2024 5:34 pm
-
-
Signal light Kit 6 Volt.
Replies: 1
by
BobP » Sun Mar 17, 2024 2:34 pm
First post
FS near new Model T-A 6volt signal light kit. It is made to work on a car with bumpers but would work otherwise. The lights fit between the bumper bars. I just took it off a Model A. New price is about $220. I will take $85 plus shipping. NO TEXTING. fiveo7 458 677eight. S. MN.
Last post
Sold to Adam, Thanks.
- 1 Replies
- 158 Views
-
Last post by BobP
Sun Mar 17, 2024 3:41 pm
-
-
FS Stewart Speedometer gear
Replies: 4
by
fordrelic » Sat Feb 17, 2024 9:32 am
First post
For Sale a Stewart speedometer gear. No 24, 9p, 64 T.
Clean it up and ready to go.
$70 includes shipping to lower 48.
speedo gear.jpg
Last post
to the top
- 4 Replies
- 589 Views
-
Last post by fordrelic
Sun Mar 17, 2024 2:28 pm
-
-
FS speedo cable housing
Replies: 1
by
fordrelic » Sat Mar 02, 2024 11:25 am
First post
Cable housing 50 long.
Cable missing, housing only.
$20 plus shipping
speedo housing 2.jpg speedo housing.jpg
Last post
to the top
- 1 Replies
- 261 Views
-
Last post by fordrelic
Sun Mar 17, 2024 2:27 pm
-
-
FS 17-22 Coupe deck lid
Replies: 1
by
fordrelic » Sat Mar 09, 2024 7:58 am
First post
For sale a deck lid for a 1917-22 coupe.
Good condition.
$150 plus shipping
deck lid.jpg deck lid 2.jpg
Last post
to the top
- 1 Replies
- 145 Views
-
Last post by fordrelic
Sun Mar 17, 2024 2:27 pm
-
-
Now shipping Full Flow Float Valves for 2024 touring season
Replies: 4
by
Scott_Conger » Fri Mar 15, 2024 5:36 pm
First post
Why strangle your car with modern INCORRECTLY MADE float valves?
standard vs full flow.jpg
Do my valves work? Ask the guy who just passed you on that last long hill...
Full Flow Float Valves in Process.jpg Full Flow Float Valves.gif
For info EMAIL ME DIRECTLY
I don't monitor ads closely particularly after it sinks out of view, so EMAIL ME...
Last post
Scott, email sent...through forum.
- 4 Replies
- 315 Views
-
Last post by BigBen
Sun Mar 17, 2024 1:31 pm
-
-
FS Starter block off plates *reduced price*
Replies: 1
by
NealW » Thu Mar 07, 2024 12:04 pm
First post
I ended up with an extra set of starter block off plates, so I'm selling them for $20, which includes US priority mail shipping. Please contact me using the info below if interested.
Thanks,
Neal
Last post
Updated to a lower price
- 1 Replies
- 220 Views
-
Last post by NealW
Sun Mar 17, 2024 12:50 pm
-
-
Non-generator timing cover fs
Replies: 9
by
CTLeonard » Tue Oct 10, 2023 10:20 am
First post
Good one. 75.00 plus shipping. 16969496398807838768428949954090.jpg 16969496691718596611614980038147.jpg
Last post
Xxxxxxxxxxxx
- 9 Replies
- 576 Views
-
Last post by CTLeonard
Sun Mar 17, 2024 12:34 pm
-
-
30-31 top irons and bows fs
Replies: 1
by
CTLeonard » Mon Jan 22, 2024 3:35 pm
First post
Newly fabricated irons as close as I can get them. Had a foundry pour the blocks as Henry did. Also have the individual pieces for those bent ones. The ones everybody grabs hold of to get in! Top bows and header included. The price is 1850.00 plus shipping. Welcome to inquire on separate pieces. These fit the 30-31deluxe roadster...
Last post
Xxxxxxxxxxxx
- 1 Replies
- 220 Views
-
Last post by CTLeonard
Sun Mar 17, 2024 12:33 pm
-
-
WTB Front Fender Brackets
Replies: 15
by
J1MGOLDEN » Mon Mar 11, 2024 3:54 pm
First post
A friend that does not do Email needs a pair of Ford T front fender brackets and asked me to help him find them. They are:
A Part Number 4852 for the Ford 1915 - 1925 Front Fender Iron Bracket Left Side
A Part Number 4853 for the Ford 1915 - 1925 Front Fender Iron Bracket Right Side
Jim Golden, Bowie, MD
Last post
Here is a pair I have if needed.
20240317_114345.jpg
20240317_114406.jpg
20240317_114414.jpg
- 15 Replies
- 500 Views
-
Last post by RVA23T
Sun Mar 17, 2024 11:52 am
-
-
W T B 11-14 headlight forks
Replies: 2
by
Burlingtontguy » Sat Mar 16, 2024 9:22 pm
First post
I need a pair of 11-14 Headlight Forks Prefer originals , But repops would work, Send me E-Mail with pictures and price.
Last post
I have a very nice pair of originals. Just got back from Chickasha, so will take a day or two to dig them out. (and recuperate). 100.00 plus shipping. Send me a message if interested. Or call 501 seven four five 439 seven. Leave a message and phone # if no answer. We are unloading today and may miss a call.
- 2 Replies
- 158 Views
-
Last post by dobro1956
Sun Mar 17, 2024 10:29 am
-
-
FS ASSORTMENT OF BOOKS (SOLD)
Replies: 1
by
Mark Chaffin » Fri Mar 15, 2024 4:52 pm
First post
Assortment of Model T related books $35 plus $15.50 domestic shipping. Mark Chaffin (951)805-0928
20240315_133426.jpg
Last post
Sold to Dean. Thank you.
- 1 Replies
- 264 Views
-
Last post by Mark Chaffin
Sun Mar 17, 2024 10:24 am
-
-
WTB Raydex Light diffuser
Replies: 3
by
WorldChamp1914 » Wed Mar 06, 2024 11:24 am
First post
I have a pair but one needs repair…..any out there for sale?
Last post
Video of what they do
Check this out pair went unsold uin Victoria
These were use to cutoff light that blinded oncoming drivers as well. Shade is green
- 3 Replies
- 367 Views
-
Last post by TRDxB2
Sun Mar 17, 2024 1:28 am
-
-
- 2 Replies
- 126 Views
-
Last post by Charlie_26_TT_Ccab
Sat Mar 16, 2024 11:32 pm
-
-
- 3 Replies
- 516 Views
-
Last post by WorldChamp1914
Sat Mar 16, 2024 8:06 pm
-
-
FS EARLY TIMING COVER (SOLD)
Replies: 1
by
Mark Chaffin » Fri Mar 15, 2024 7:28 pm
First post
Early timing cover. No cracks. Price is $80 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928
20240315_161948.jpg
20240315_162000.jpg
Last post
Timing cover is sold.
- 1 Replies
- 286 Views
-
Last post by Mark Chaffin
Sat Mar 16, 2024 7:14 pm
-
-
Hand Crank Siren
by
ThreePedalTapDancer » Sat Mar 16, 2024 3:09 pm
Here is a very nice early hand cranked fire, ambulance or police siren. It is heavy duty, cast aluminum. Precision steel internal gears. Heavy cast steel mounting bracket. Very very loud! Has brass brake button on back to silence it quickly. No serious damage or repairs, just a small nicks here and there on housing. Works great, very clean, and is...
- 0 Replies
- 203 Views
-
Last post by ThreePedalTapDancer
Sat Mar 16, 2024 3:09 pm
-
-
FS accessory vesta spot light
Replies: 2
by
Karl Von Neumann » Thu Feb 22, 2024 2:18 pm
First post
Vesta spot light and mount needs restoration great for a patina car switch works but is crusty. $65 plus the ride
Last post
Move to top
- 2 Replies
- 546 Views
-
Last post by Karl Von Neumann
Sat Mar 16, 2024 12:26 pm
-
-
FS holley carb cores
Replies: 3
by
Karl Von Neumann » Wed Feb 21, 2024 5:02 pm
First post
Holley carb cores decent shape ready for you to restore 50$ea plus the ride located pleasant prairie wisconsin
Last post
Move to top
- 3 Replies
- 727 Views
-
Last post by Karl Von Neumann
Sat Mar 16, 2024 12:26 pm
-
-
FS Door latches
Replies: 3
by
Karl Von Neumann » Mon Feb 19, 2024 2:15 pm
First post
Door latches used I tried to mark if they we stuck or not but they will all need some tlc in some way 25$ each plus the ride
Looking for a driver side 27 Door latch
Last post
Move to top
- 3 Replies
- 478 Views
-
Last post by Karl Von Neumann
Sat Mar 16, 2024 12:26 pm
-
-
WTB. 26 driver side coupe door latch
Replies: 8
by
Karl Von Neumann » Thu Feb 08, 2024 2:02 pm
First post
Wanted 26-7 coupe driver side door latch pic of the passenger latch is the style I need bolts on the interior of the door. Door in second pic. Also looking for front door window regulators and exterior door handles Plenty of parts to trade
Last post
Back to top
- 8 Replies
- 520 Views
-
Last post by Karl Von Neumann
Sat Mar 16, 2024 12:25 pm
-
-
- 0 Replies
- 109 Views
-
Last post by Karl Von Neumann
Sat Mar 16, 2024 12:25 pm
-
-
FS: 1923 Texas License Plates
Replies: 4
by
George House » Fri Mar 15, 2024 12:00 pm
First post
You might say expensive - but they’re rare ! License plate collectors will say TX issued plates in 1923 weren’t dated.
But the ‘D’ on these plates is the clue. They’re Dealer plates ! And restored with no additional holes.
Only $425 + free delivery in lower 48 states….
gwhouse731(at)gmail(dot)com
Anyone need restored TX 1931 pair at half the...
Last post
For 2 K, I'd expect them to come with a car attached.
- 4 Replies
- 202 Views
-
Last post by TXGOAT2
Sat Mar 16, 2024 11:52 am
-
-
FS: My Drag Link Collection….
Replies: 1
by
George House » Fri Mar 08, 2024 1:40 pm
First post
All 30.25” +- According to extensive researcher Chris the Canadian, these are correct for May 1919-Aug 1925. All have one end cap. Only $80 for all five + FedEx actual costs. gwhouse731(at)gmail(dot)com
Last post
Spoken for pending $$ receipt. Thank you Roger and MTFCA
- 1 Replies
- 387 Views
-
Last post by George House
Sat Mar 16, 2024 9:28 am
-
-
WTB 1911 closed valve engine.
by
BobP » Sat Mar 16, 2024 7:48 am
I am looking for a closed valve 1911 engine, my car is a June open runabout. It can be a good rebuildable to excellent runner. I am located in S. Mn. No texting. five07458677eight. Thanks, Bob.
- 0 Replies
- 189 Views
-
Last post by BobP
Sat Mar 16, 2024 7:48 am
-
-
WTB BRACKET 20S ROADSTER
Replies: 1
by
Karl Von Neumann » Fri Mar 15, 2024 10:08 pm
First post
I need this bracket for the right hand side of the car if your american we call it passenger side 😜 would take a pair if I had to
Last post
sent email
- 1 Replies
- 170 Views
-
Last post by AZTerry
Sat Mar 16, 2024 2:27 am
-
-
SOLD Muncie U/joint SOLD
Replies: 1
by
Craig Leach » Fri Mar 15, 2024 11:08 pm
First post
This is the best Muncie U/joint I have ever seen. I can force a .0025 feeler gauge in between the trunnion & spider & pick up the joint with the
gauge. U/joint has been cleaned up in solvent & oiled. Not bead blasted! This is the Holy Grail of Muncie parts. $120 +the ride
six0two-7six9-0two57 IMG_2998.jpg IMG_3001.jpg IMG_3002.jpg
Craig.
Last post
I will take that Muncie U-joint. Thanks!
- 1 Replies
- 196 Views
-
Last post by vwmarc
Sat Mar 16, 2024 1:21 am
-
-
F/S Bailey's Gasoline gage
by
Craig Leach » Fri Mar 15, 2024 10:58 pm
Bailey's Gasoline Gage for Ford Cars. This is for a oval tank. With the original box ( box not in great shape ) Gage is used & has no gasket. Is free
& moves easy but shows wear on the stem. $120 + the ride six0two-7six9-0two57
IMG_2993.jpg IMG_2994.jpg
Craig. IMG_3005.jpg
- 0 Replies
- 216 Views
-
Last post by Craig Leach
Fri Mar 15, 2024 10:58 pm
-
-
F/S Hastings Taper Gage
by
Craig Leach » Fri Mar 15, 2024 10:46 pm
Period Hastings Taper Gage in box ( box not super great) Absolute Guarantee will replace or repair without charge at any time gage fails to
function is printed on the box. $100 + the ride. six0two-7six9-0two57 IMG_2991.jpg IMG_2992.jpg
Craig. IMG_3004.jpg
- 0 Replies
- 214 Views
-
Last post by Craig Leach
Fri Mar 15, 2024 10:46 pm
-
-
F/S Dipstick
by
Craig Leach » Fri Mar 15, 2024 10:36 pm
IMG_2996.jpg Period T dipstick, Knurled knob has paten applied for on the top. No oil residue may be NOS? $75 +
the ride six02-7six9-0two57 Yes it is assembled backwards.
Craig. IMG_3006.jpg
- 0 Replies
- 231 Views
-
Last post by Craig Leach
Fri Mar 15, 2024 10:36 pm
-
-
F/S Band Wrench
by
Craig Leach » Fri Mar 15, 2024 10:26 pm
Have a Ford 5-Z-829 band wrench for sale, as found not cleaned or bead blasted. $35 +the ride. six02-7six9-0two57 IMG_2995.jpg
Craig.
- 0 Replies
- 189 Views
-
Last post by Craig Leach
Fri Mar 15, 2024 10:26 pm
-
-
For Sale: Original Updraft Carburetor Manifold with Linkage
Replies: 1
by
GGZ » Sat Mar 09, 2024 3:15 pm
First post
Here is an original, cast iron, updraft manifold with the L linkage. This is in good condition and is made for a Model T stock block. One of the bolt holes has been enlarged but still works well.
It has an about 1 1/4 bore and a 2 1/2 center to center bolt mounting.
This can be used for Winfield, Miller-Master, Zenith, Model A Ford, etc.
A...
Last post
Still for sale. Nice manifold!
- 1 Replies
- 409 Views
-
Last post by GGZ
Fri Mar 15, 2024 9:42 pm
-
-
For Sale: Morshe/Lee Gas Gauge
Replies: 2
by
RajoRacer » Tue Mar 12, 2024 5:26 pm
First post
Here's one of Tim's great Night & Day gas gauges - this is for a round tank. $125.00 + the ride.
Last post
Gauge spoken for - thanks MTFCA !
- 2 Replies
- 457 Views
-
Last post by RajoRacer
Fri Mar 15, 2024 6:42 pm
-
-
FS: Accessory Headlight Lenses
Replies: 1
by
TPrez1923@aol.com » Fri Mar 15, 2024 5:18 pm
First post
For Sale: More-Lite Lenses, Patented May 23, 1917, 8 1?4 diameter. A few minor chips on the edges, shouldn't affect mounting. Asking $45.00 OBO plus flat rate shipping.
Last post
Sold to Ed. Thank you.
- 1 Replies
- 193 Views
-
Last post by TPrez1923@aol.com
Fri Mar 15, 2024 6:23 pm
-
-
**SOLD** New and Improved Ignition Switch and Ammeter
Replies: 3
by
George House » Fri Mar 08, 2024 10:22 am
First post
…with #55 key. Key easily turns from BAT to MAG. Light switch purposely clicks from dim to bright and ammeter appears NOT to be a Model A repop and needle appears free. Only $80 + USPS small flat rate box…
gwhouse731(at)gmail(dot)com
Last post
George, pkg arrived today thx. George
- 3 Replies
- 412 Views
-
Last post by George Hand
Fri Mar 15, 2024 6:09 pm
-
-
Zenith S4BF adjustable jets available - 5 sets and probably that will be it
by
Scott_Conger » Fri Mar 15, 2024 5:48 pm
Make your S4BF carb run correctly for your particular car...
Dial in the high speed mixture just like you dial in the idle, with this good looking, compact device
Kit includes the needle assembly and custom jet
IMG_20240218_120950~2.jpg IMG_20240218_121346~2.jpg S4BF Main Jet 3.png
If interested in info: EMAIL ME DIRECTLY
A response here...
- 0 Replies
- 102 Views
-
Last post by Scott_Conger
Fri Mar 15, 2024 5:48 pm
-
-
WTB Coil for a Brush automobile
Replies: 5
by
YellowTRacer » Mon Feb 05, 2024 3:25 pm
First post
Anyone have an oddball coil for a Brush automobile? The Brush only has a single coil and the coil box measures 3 1/8 X 2 1/2 a little different size than a Model T Ford coil and it has 3 contact points/ buttons , one on each side of the upper area and one at the back on the upper area. It's all we need in order to get this contraption running....
Last post
Yes that's it Tom!
- 5 Replies
- 414 Views
-
Last post by YellowTRacer
Fri Mar 15, 2024 5:27 pm
-
-
SPOKEN FOR ! - RUSCO WOVEN FAN BELTS FOR 1911-1916 MODEL T'S NOS 12 EACH
Replies: 1
by
Jay In Northern Ca. » Fri Mar 15, 2024 1:32 pm
First post
These dozen belts packed with wooden stretchers are new old stock with remains of the original box. Asking $35 plus postage.
fan belts 1.jpg fan belts 2.jpg fan belts 3.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
Last post
Jay, I will take them.
Richard Williams
97 Creekwood road
Humboldt, TN 38343
731-618-0207
rwilliams@humboldtministorage.com
- 1 Replies
- 197 Views
-
Last post by rnwilliams
Fri Mar 15, 2024 5:08 pm
-
-
- 0 Replies
- 158 Views
-
Last post by Jay In Northern Ca.
Fri Mar 15, 2024 5:03 pm
-
-
FS MISCELLANEOUS PARTS
Replies: 3
by
Mark Chaffin » Fri Mar 15, 2024 1:26 pm
First post
Miscellaneous parts as indicated below. Mark Chaffin (951) 805-0928
Screenshot_20240315_101629_Chrome.jpg
Good sediment bulb $30.00 plus $8.50 domestic shipping. SOLD
Screenshot_20240315_101649_Chrome.jpg
Hot air pipes (4) $20.00 plus $15.50 domestic shipping.
Screenshot_20240315_101720_Chrome.jpg
Footman loops and door straps $20.00...
Last post
Sediment bulb pending to Mr. Burket.
- 3 Replies
- 300 Views
-
Last post by Mark Chaffin
Fri Mar 15, 2024 4:09 pm
-
-
FS LICENSE PLATES (REDUCED PRICES)
Replies: 10
by
Mark Chaffin » Tue Jan 09, 2024 11:58 am
First post
Assortment of license plates available for purchase. Description and prices as indicated below. USPS Priority Mail and additional charge of $18.00. Combine items and save on shipping. Mark Chaffin (951) 805-0928
l1.jpg
#1 1914 Single License Plate. Nice overall condition $175 SOLD
l2.jpg
#2 1915 Pair of license plates. Nice overall...
Last post
#5, #6, #8, #9, #11 and #12 sold to Rick. Thanks Rick! :)
- 10 Replies
- 799 Views
-
Last post by Mark Chaffin
Fri Mar 15, 2024 4:08 pm
-
-
FS Brass Steering Wheel
Replies: 6
by
ThreePedalTapDancer » Mon Feb 05, 2024 12:13 pm
First post
15 inch cast brass Model T steering wheel , excellent condition, 380 includes shipping.
IMG_0078.jpeg
Last post
Hey Ed,
We have a deal on the steering wheel! If you will email me at cjtellman@gmail.com we'll exchange info.
Thanks,
Campbell Tellman II
1916 Ford Touring
Beauifort, NC
- 6 Replies
- 886 Views
-
Last post by Campbell Tellman
Fri Mar 15, 2024 3:59 pm
-
-
For Sale: 1911-1914 Brass Era Gray and Davis #115 Tail Lamp
Replies: 3
by
GGZ » Thu Jan 25, 2024 8:13 pm
First post
This Gray and Davis #115 tail lamp is about 9 1/2 tall and is probably from about 1911 to 1914. It is missing the clear side lens, which is easy to make. The body, chimney and font are brass. The door and top are steel. The red lens is in good condition as is the burner assembly. Overall, this is a good, old lamp that can be used for an original...
Last post
Still for sale.....
- 3 Replies
- 562 Views
-
Last post by GGZ
Fri Mar 15, 2024 3:53 pm
-
-
For Sale: Stewart Warner Hand Operated Tachometer
Replies: 3
by
GGZ » Sat Jan 13, 2024 1:32 pm
First post
This Stewart Warner Hand Operated Tachometer is probably from the 1950s. It is New Old Stock and includes two rubber tips and the original instructions in the original envelope. It measures about 2 3/4 inches in diameter. A great piece to measuring revolutions per minute (R.P.M.). A collectible that is a usable tool.
The price is 125.00 including...
Last post
Still for sale....
- 3 Replies
- 556 Views
-
Last post by GGZ
Fri Mar 15, 2024 3:53 pm
-
-
SPOKEN FOR ! - DALECO TIMER AND ROTOR NEW OLD STOCK
Replies: 1
by
Jay In Northern Ca. » Fri Mar 15, 2024 1:20 pm
First post
This is a hard to find brand new old stock timer from my Model T Timer collection. Rotor has a key way. Asking $50 plus postage.
Daleco 1.jpg Daleco 2.jpg Daleco rotor.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
Last post
I'll take it.
Thanks,
Brian
- 1 Replies
- 146 Views
-
Last post by 1913Runabout
Fri Mar 15, 2024 2:21 pm
-
-
- 0 Replies
- 141 Views
-
Last post by Layden Butler
Fri Mar 15, 2024 1:29 pm
-
-
WANTED: Early Minnesota AAA Badges
by
Erik Johnson » Fri Mar 15, 2024 1:03 pm
WANTED: Early Minnesota State Automobile Association (AAA) badges and emblems
In particular, looking for cast brass emblems and nickel over stamped brass emblems that list Minnesota cities
Refer examples in photos
- 0 Replies
- 80 Views
-
Last post by Erik Johnson
Fri Mar 15, 2024 1:03 pm
-
-
FOR SALE - BRAKE ROD ANTI-RATTLER SET OF FOUR NEW OLD STOCK
by
Jay In Northern Ca. » Fri Mar 15, 2024 1:03 pm
These are new never used old stock. They attach at both ends of the brake rods. The original black paint has mostly chipped of after years of storage. Asking $30 plus postage.
Brake Anti Rattlers 1.jpg Brake Anti Rattlers 2.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
- 0 Replies
- 137 Views
-
Last post by Jay In Northern Ca.
Fri Mar 15, 2024 1:03 pm
-
-
FS WIRE WHEELS (26/27)
by
Mark Chaffin » Fri Mar 15, 2024 12:45 pm
Good wire wheels. Seven to choose from. $100 each. Pick up in Lake Elsinore, CA. Mark Chaffin (951) 805-0928
20240315_094152.jpg
- 0 Replies
- 153 Views
-
Last post by Mark Chaffin
Fri Mar 15, 2024 12:45 pm
-
-
Wanted Three Rajo Rocker Arms Model 30
Replies: 13
by
WaltM » Wed Nov 01, 2023 4:50 pm
First post
WTB: Looking for three Rajo rocker arms for a commercial Rajo head (model 30). Call or text (248) 894-75fiveone. Any help greatly appreciated. Thanks, Walt
Last post
Hope someone at the Chickasha swap meet finds the Rajo rocker arms I need. Thanks, Walt
- 13 Replies
- 1178 Views
-
Last post by WaltM
Fri Mar 15, 2024 12:42 pm
-
-
Last call for TW brush order
by
TWrenn » Fri Mar 15, 2024 12:30 pm
As mentioned above and on my previous thread...today is last call for anyone who wants to join in my order for the ROUND TW brush.
PM me for details but current cost is in the $24 area plus shipping as I only have the minimum order of 12. I'll need your email as well as shipping address of course. Thanks.
- 0 Replies
- 60 Views
-
Last post by TWrenn
Fri Mar 15, 2024 12:30 pm
-
-
WTB crankshaft
Replies: 6
by
joshboogie » Mon Mar 11, 2024 5:49 pm
First post
WTB straight crank that will turn 10-30 or one that is already turned 10-30 . Josh.
Last post
have an EE ground 10/10 under ready to go
- 6 Replies
- 667 Views
-
Last post by Tim D
Fri Mar 15, 2024 10:15 am
-
-
WTB Tires, Chickasha
by
Bill Everett » Fri Mar 15, 2024 9:44 am
Model T Whitewall Tires.jpeg
I was unable to make the trip to Chickasha this year, but if anyone has, or sees, one or two of these tires there, I'm wanting to buy them.
30 x 3-1/2.
Text me a couple of pictures at 901-496-8795.
I'm good with sending you $$ on Paypal.
Thank you.
Bill Everett
- 0 Replies
- 97 Views
-
Last post by Bill Everett
Fri Mar 15, 2024 9:44 am
-
-
FS AMES BUILT DATA PLATES
Replies: 6
by
Mark Chaffin » Thu Mar 14, 2024 5:41 pm
First post
One pair of AMES BUILT data plates. Price is $20 for the pair with free domestic shipping. Mark Chaffin (951) 805-0928
AMES.jpg
Last post
Sold to Dan.
- 6 Replies
- 303 Views
-
Last post by Mark Chaffin
Fri Mar 15, 2024 1:03 am
-
-
FS wood wheel hubs 16 to 27
Replies: 2
by
Karl Von Neumann » Thu Mar 14, 2024 10:33 am
First post
Hubs are 40$ea plus the ride I have a ton of them
Last post
I need 2 front,2 rear plus the flanges.
Send me a email or message
- 2 Replies
- 242 Views
-
Last post by Karl Von Neumann
Thu Mar 14, 2024 10:49 pm
-
-
Phinney-Walker all brass dash clock SOLD
Replies: 3
by
Layden Butler » Thu Mar 14, 2024 1:26 pm
First post
Angle mount all brass clock for vertical wooden dash mount as on brass era Model Ts. Runs when shaken but will need cleaning and lube. Also will need a mounting bracket fabricated, bracket is hidden when clock is installed.
Last post
Here’s what the correct mounting bracket, screw that holds it together and screw cover for the bottom hole looks like.
IMG_1708.jpeg
IMG_1712.jpeg
IMG_1711.jpeg
- 3 Replies
- 305 Views
-
Last post by Tbird
Thu Mar 14, 2024 9:33 pm
-
-
FS WOOD FELLOW WHEELS
by
Mark Chaffin » Thu Mar 14, 2024 5:37 pm
One pair of front (30x3) wood fellow wheels with Firestone Non-Skid tires. Overall condition is fair. Price for the pair is $400. Pick up is preferred. Can ship; however, will be a bit pricy. Mark Chaffin (951) 805-0928
WHEELS 1.jpg
WHEELS 2.jpg
WHEELS 3.jpg
WHEELS 4.jpg
- 0 Replies
- 225 Views
-
Last post by Mark Chaffin
Thu Mar 14, 2024 5:37 pm
-
-
WTB Early Pliers, Part No. T 1903
Replies: 47
by
BigAl » Mon Sep 18, 2023 12:47 pm
First post
The last tool I need to complete my 1911 Tool Kit! Thank you MTFCA and Bob for helping me with finding and buying the other two tools I needed. The following picture is the T 1903 Pliers I am looking for. Any help or leads will be great fully appreciated. 1911 T 1903 PLIERS - 091523.JPG
Last post
Keep trying!
- 47 Replies
- 3764 Views
-
Last post by BigAl
Thu Mar 14, 2024 5:22 pm
-
-
PRICE REDUCED ! - AWESOME ALL WOODEN 17" STEERING WHEEL WITH HORN BUTTON
Replies: 2
by
Jay In Northern Ca. » Tue Mar 12, 2024 6:48 pm
First post
This is a exceedingly hard to find All walnut wood Sewell accessory 17 steering wheel with built in horn button. It's in wonderful condition as you can see from the photos. NOW $395 plus postage. Sewell All Wood 17 inch Steering Wheel 1.jpg Sewell All Wood 17 inch Steering Wheel 2.jpg Sewell All Wood 17 inch Steering Wheel 3.jpg Sewell All Wood 17...
Last post
xxxxxxxxxx
- 2 Replies
- 416 Views
-
Last post by Jay In Northern Ca.
Thu Mar 14, 2024 5:09 pm
-
-
FS: Motor mount, spring clamp thing
Replies: 2
by
bmklawt » Thu Mar 14, 2024 11:56 am
First post
Front motor mount, spring clamp that came on my 1927 Touring, I would never figure out how to make this thing work.
A forum threat I stater asking about this
Best offer plus the ride.
Last post
Bruce,
You have two separate mounts, they don't belong together.
They belong together as an accessory
Spring plate fix.jpg
--
However the plate looks a bit different - there should be some of it the fits into the cross member - depends on the number of leaves in the spring. Thinking it may have part of a hitch
- 2 Replies
- 225 Views
-
Last post by TRDxB2
Thu Mar 14, 2024 1:48 pm
-
-
SPOKEN FOR ! - CHEX-OIL DASH MOUNT OIL CHANGE REMINDER
Replies: 1
by
Jay In Northern Ca. » Wed Mar 13, 2024 9:04 pm
First post
This is a dash mount reminder for changing your oil in a timely manner. In excellent condition. all the wheels turn. Asking $40 plus postage. Chex-oil 1.jpg chex-oil 2.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
Last post
ill take that jay pm inbound
- 1 Replies
- 219 Views
-
Last post by Linus Tremaine
Thu Mar 14, 2024 12:25 pm
-
-
SOLD.........
Replies: 3
by
GGZ » Sun Feb 11, 2024 12:13 pm
First post
SOLD..........
Last post
SOLD.........
- 3 Replies
- 619 Views
-
Last post by GGZ
Thu Mar 14, 2024 11:52 am
-
-
Capacitors for Model T Ford Ignition Coils?
by
Ron Patterson » Thu Mar 14, 2024 11:17 am
For Sale, replacement capacitors for Model T Ford ignition Coil rebuilding. These are excess to my needs.
Type 418P Orange Drop, Round Profile, Polyester Film-Foil capacitors. Capacitance .47 uF, 400v, dV/dt rating of 700 volts/uS. I have installed over 25,000 of these capacitors over the years with no problems or component failures.
Perfect for...
- 0 Replies
- 289 Views
-
Last post by Ron Patterson
Thu Mar 14, 2024 11:17 am
-
-
- 1 Replies
- 219 Views
-
Last post by Richard K
Thu Mar 14, 2024 9:49 am
-
-
FS WIRE WHEEL WRENCH
Replies: 1
by
Mark Chaffin » Sun Mar 10, 2024 12:38 pm
First post
Wire Wheel Corp. #4. 2 3/4 across flats WAS $200 NOW $175 with free domestic shipping. Mark Chaffin (951)805-0928
20240308_153005.jpg
20240308_152942.jpg
Last post
Reduced price $175 shipped.
- 1 Replies
- 424 Views
-
Last post by Mark Chaffin
Thu Mar 14, 2024 9:04 am
-
-
TT high speed ring and pinion
Replies: 2
by
Racer_22 » Tue Feb 20, 2024 8:31 pm
First post
For Sale: TT high speed ring and pinion like new maybe new. Price $1,000.00
Kevin Prus 330-seven 7 four-7one three 0.
Located in Canfield Ohio USA
Last post
5 to 1 +/_.
- 2 Replies
- 501 Views
-
Last post by RajoRacer
Thu Mar 14, 2024 8:21 am
-
-
REDUCED PRICE ! Patd. Dec 1908 E&J 1914 Cowl Lamp
Replies: 1
by
George House » Sat Mar 09, 2024 10:56 am
First post
…Left side (not necessarily drivers side) 😜 No burner. Small dimple very top of chimney. Excellent font. Round bevel glass perfect. Square beveled glass cracked. See addl. brass above font and around square glass. Steel body excellent shape. Only $75+ USPS large flat rate box $24.75
Wrapped lots of bubble wrap
gwhouse731(at)gmail(dot)com
Last post
Last and only ***btt*** before this ad falls into obscurity 😔
- 1 Replies
- 177 Views
-
Last post by George House
Thu Mar 14, 2024 6:23 am
-
-
FS: Iron Holley 3 Screw Top
Replies: 2
by
George House » Fri Mar 08, 2024 1:32 pm
First post
Carb Repairmen lookey here !! Pat’d Dec 22 1914… great threads. Can mail in $8 bubble wrap envelope. Only $9+ above mailing. gwhouse731(at)gmail(dot)com
Last post
Last *** btt*** before this ad falls into obscurity 😔
- 2 Replies
- 251 Views
-
Last post by George House
Thu Mar 14, 2024 6:20 am
-
-
- 5 Replies
- 330 Views
-
Last post by FlyingZman
Wed Mar 13, 2024 10:18 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum