Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

9184 topics

Page 1 of 92
- Jump to page:
1
2
3
4
5
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by SparkTag « Mon Mar 01, 2021 10:51 am
Replies: 26
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB a complete stanchion either side---need ONE --advertise wind wing brackets, can have some rust but look like it has been in the or weather for several months greg adams ---beladams1@verizon net.

26 Replies

14749 Views

Last post by SparkTag
Mon Mar 01, 2021 10:51 am

Topics

Replies

Views

Last post

1914 engine trans

Last post by RichJ « Thu Apr 22, 2021 6:29 am
Replies: 4
by RichJ » Mon Mar 08, 2021 5:25 am

First post

Complete engine /trans
.030 aluminum pistons.looks to be a running engine when removed probably for upgrade cast iron hogs head
could be available for inspection in Luray I'm thinking about 5000. for more info. call 561 262 0393 I still like the phone

Last post

Still available !!!!

4 Replies

1072 Views

Last post by RichJ
Thu Apr 22, 2021 6:29 am
More Random Excess Stuff for Sale - Make Offer!

Last post by RichJ « Thu Apr 22, 2021 6:12 am
Replies: 2
by CudaMan » Wed Apr 21, 2021 5:08 pm

First post

Here is another batch of extra stuff that I have accumulated but have no current need for. If you are interested in any of the items, feel free to PM or email me with your shipping address and a reasonable offer that at least covers the cost of shipping.

Item A is an empty leather tool roll that I bought for the Flanders tools, but it doesn't fit...

Last post

Mark
I'm interested in the E a J lamp I'M I'm sending a E mail

2 Replies

297 Views

Last post by RichJ
Thu Apr 22, 2021 6:12 am
SUNDAY SWAP MEET

Last post by Mark Chaffin « Thu Apr 22, 2021 12:03 am
Replies: 10
by Mark Chaffin » Sun Apr 18, 2021 12:28 pm

First post

Good morning everyone. Hope you all are doing well. This week’s Sunday Swap Meet offerings are all good used original items. Description and prices are as indicated below. In most cases, USPO Flat Rate shipping will be an additional $8.50, unless stated otherwise. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951)...

Last post

Sorry Randy. That was the only one.

10 Replies

775 Views

Last post by Mark Chaffin
Thu Apr 22, 2021 12:03 am
Williams rotor jr. Model accelerator for fords. Sold

Last post by StanHowe « Wed Apr 21, 2021 9:52 pm
Replies: 3
by CTLeonard » Wed Apr 21, 2021 11:17 am

First post

Williams bros. Aircraft corporation accelerator pedal for holley model. Just found it on the shelf. 40.00 plus shipping IMG_20210421_100952970.jpg IMG_20210421_100846745.jpg IMG_20210421_100822550.jpg IMG_20210421_100826390.jpg

Last post

I had one like it in a pickup I sold years ago. Should have highgraded it off. Never seen a new old stock one. It will go in my 27 coupe if I ever get time to get the vaporizer off of it and put a real carburetor on it. I have a rebuild engine sitting under the bench that I did for a speedster about ten years ago, never had a minute to work on it....

3 Replies

291 Views

Last post by StanHowe
Wed Apr 21, 2021 9:52 pm
Lotsa radiator bling, L@@K !

Last post by Dropacent « Wed Apr 21, 2021 8:48 pm
Replies: 5
by Dropacent » Tue Apr 20, 2021 3:40 pm

First post

First off, I cannot believe this nice FORD script nickel plated barrel, Bridgeport tire pump is still here. Talk to me! As for the rest, take a good look. These are all original meters, not 1950s and later reproductions. The gargoyle is the only thing new. Glad to mix and match, separate from the display caps, etc. I am also glad to describe any...

Last post

DE8DEC06-6931-491B-BF0B-35982E12A9AE.jpeg

5 Replies

573 Views

Last post by Dropacent
Wed Apr 21, 2021 8:48 pm
WTB Smith Form-A Truck I.D.Plate

Last post by Tbird « Wed Apr 21, 2021 8:07 pm
Replies: 3
by 67pontiac » Wed Apr 21, 2021 3:05 pm

First post

Here's a long shot, but I'll give it a try. Title pretty much says it all. I'm looking for the brass, (or possibly aluminum), I.D. plate that rivets to the back of a Smith Form-A-Truck frame. Anybody have one laying around?? Let me know what you find. If anybody made reproductions, that would be fine. Kind Regards, Bill Bennett (559) nine six...

Last post

Bill,
This guy had one for sale. You can see the plate you're talking about, but not a crisp image. I'd consider reaching out to this seller and see if he still has it and if so see if you can get a high res. picture of the plate, or contact Jerry at the Nostalgic Reflections he might have one on file. He's done a lot of plates.

3 Replies

128 Views

Last post by Tbird
Wed Apr 21, 2021 8:07 pm
For Sale 49 year old collection of "T" parts

Last post by Burlingtontguy « Wed Apr 21, 2021 6:28 pm
Replies: 61
by Burlingtontguy » Thu Oct 15, 2020 12:33 pm

First post

I still have a large collection of T parts for sale : Engines, Frames, Rear axles, Front axles, springs front and rear,enough parts to put 5 speedster chassis together and more, some sheet metal ,, Send me an e-mail or call me at 401-932-3191 with your needs... It all has to go 3 barns full, Thanks, Dennis,,,,Located in Connecticut come on down...

Last post

To the top

61 Replies

5933 Views

Last post by Burlingtontguy
Wed Apr 21, 2021 6:28 pm
WTB short block

Last post by Burlingtontguy « Wed Apr 21, 2021 6:26 pm
Replies: 8
by DonH » Tue Apr 20, 2021 10:32 am

First post

Need good short block or source to rebuild my 1925 engine.

Last post

I have 2 short blocks for sale 1913 and a 1920-25 Dennis 401-932-3191

8 Replies

398 Views

Last post by Burlingtontguy
Wed Apr 21, 2021 6:26 pm
WTB stem cover

Last post by CudaMan « Wed Apr 21, 2021 6:19 pm
Replies: 1
by Brian D » Wed Apr 21, 2021 5:55 pm

First post

WTB like the photo.
Brian.

Last post

From your picture, yours appears to be 2 1/8 high. I have these two available, but they are 2 1/4 high. If you still want them, I'll send them to you for $15.00 including shipping in a USPS small flat rate box. Just PM or email me with your shipping address and I will reply with payment instructions. :)

1 Replies

75 Views

Last post by CudaMan
Wed Apr 21, 2021 6:19 pm
WTB ammeter

Last post by CTLeonard « Wed Apr 21, 2021 3:53 pm
Replies: 1
by Rod Petrie » Wed Apr 21, 2021 3:32 pm

First post

WTB original or good reliable (not repro) ammeter for 26-27 large switch plate.20210421_142328.jpg

Last post

Email me for photos. ctleonard64@gmail.com

1 Replies

92 Views

Last post by CTLeonard
Wed Apr 21, 2021 3:53 pm
Firestone spark plugs on ebay

Last post by Etudes10 « Wed Apr 21, 2021 1:49 pm
Replies: 1
by Etudes10 » Wed Apr 21, 2021 1:23 pm

First post

New old stock plugs on ebay. Not mine, but look good. Price seems reasonable.

Last post

2 sets left with the buy it now.

1 Replies

200 Views

Last post by Etudes10
Wed Apr 21, 2021 1:49 pm
Roadster body with deck

Last post by CTLeonard « Wed Apr 21, 2021 1:15 pm

by CTLeonard » Wed Apr 21, 2021 1:15 pm

1500.00 plus shipping . In mt. Vernon in. Other body parts available IMG_20210421_115818641.jpg IMG_20210421_115513170.jpg IMG_20210421_115519177.jpg IMG_20210421_115530414_HDR.jpg

0 Replies

253 Views

Last post by CTLeonard
Wed Apr 21, 2021 1:15 pm
Accelerator pedals

Last post by CTLeonard « Wed Apr 21, 2021 11:30 am

by CTLeonard » Wed Apr 21, 2021 11:30 am

Two of them are made by fulton. I can't read the other. 10.00 each plus shipping IMG_20210421_102716098.jpg IMG_20210421_102724803.jpg

0 Replies

191 Views

Last post by CTLeonard
Wed Apr 21, 2021 11:30 am
Re-conditioned Model T connecting rods

Last post by rgould1910 « Wed Apr 21, 2021 11:19 am
Replies: 2
by Gene_French » Tue Apr 20, 2021 10:26 am

First post

i have several sets of -.020 and standard diameter re-conditioned Model T connecting rods ... these are from the same batch of old stock rods that i listed several weeks ago , these are obsolete inventory from a long ago closed auto parts store ... i do not know the re-builder , but the rods appear to be of very high quality ,they are X grooved...

Last post

Email sent.😀

2 Replies

258 Views

Last post by rgould1910
Wed Apr 21, 2021 11:19 am
TRUCK LOAD OF PARTS

Last post by dmdeaton « Wed Apr 21, 2021 10:54 am
Replies: 6
by sweet23 » Tue Apr 20, 2021 10:54 pm

First post

I just picked up a truck load of parts. Most is '19 - '27. if you see something in the pics I can bring it to Luray. I will be sorting through this stuff and listing some on here. Darryl

Last post

I see a tool box laying in the mix? Not the fancy new one.

6 Replies

485 Views

Last post by dmdeaton
Wed Apr 21, 2021 10:54 am
WTB - NOS Babbitt drive shaft bushing

Last post by Original Smith « Wed Apr 21, 2021 9:52 am
Replies: 1
by Scott_Conger » Tue Apr 20, 2021 9:47 pm

First post

WTB - NOS Babbitt drive shaft bushing

I though I bought one from Bob's some time back, but darn if I can find it now. I know I have it...just not where! It is now part of my future estate sale, so if you outlive me, be sure to look for it.

Anyone have one they'd sell?

Last post

Kim Dobbins had some for sale.

1 Replies

136 Views

Last post by Original Smith
Wed Apr 21, 2021 9:52 am
early brass horn

Last post by Scott Rosenthal « Wed Apr 21, 2021 6:58 am
Replies: 10
by Scott Rosenthal » Sun Apr 11, 2021 11:12 am

First post

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

Last post

Apologies John T. I received your Email and thought I had sent a response,, but apparently did not, so resent this AM.
Regards,
Scott

10 Replies

1015 Views

Last post by Scott Rosenthal
Wed Apr 21, 2021 6:58 am
Modern bearing replacement kit for sale, rear axle

Last post by Dropacent « Tue Apr 20, 2021 11:29 pm
Replies: 1
by Dropacent » Mon Apr 19, 2021 10:44 pm

First post

A well made set of rear axle bearings. Looks like everything needed here. Short on good Hyatt’s ? Here ya go. $260 OBO ppd to your door. ( check the catalog price). Tmorsher@icloud.com to reach me. Thanks! 1462A9D7-F832-4550-BC67-9EFE34280F90.jpeg

Last post

Back to top

1 Replies

401 Views

Last post by Dropacent
Tue Apr 20, 2021 11:29 pm
1925 TT C Cab Dump Truck

Last post by Roooster « Tue Apr 20, 2021 10:02 pm

by Roooster » Tue Apr 20, 2021 10:02 pm

1925 TT C Cab Dump Truck Runs Drives For Sale $12,000 OBO Original except truck bed NO rust Spare tire and rim, Jack , Crank for Dump Needs Cloth Roof replaced and seats recovered. I believe that everything else is original. Other than lanterns on side of Cab

0 Replies

203 Views

Last post by Roooster
Tue Apr 20, 2021 10:02 pm
FS Kingston Carb L4 SOLD!

Last post by Quickm007 « Tue Apr 20, 2021 9:49 pm
Replies: 7
by Quickm007 » Thu Apr 08, 2021 11:02 am

First post

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

Last post

Payment received it. Thank You John.

7 Replies

480 Views

Last post by Quickm007
Tue Apr 20, 2021 9:49 pm
Need the rear seat spring measurement for a 21 touring.

Last post by Sarikatime « Tue Apr 20, 2021 9:07 pm
Replies: 2
by Sarikatime » Tue Apr 20, 2021 6:04 pm

First post

Can anyone measure the rear seat spring for a 21 touring for me please. The used spring I bought seems too big and after upholstery it does not want to fit. It is about an inch too much forward. It fit without upholstery. The parts books don’t have the measurements.

Would anyone have the right spring for sale?
Frank

Last post

Thank you Dan, I will call them in the morning.

2 Replies

76 Views

Last post by Sarikatime
Tue Apr 20, 2021 9:07 pm
WTB - Running Board Luggage Rack Brackets

Last post by CudaMan « Tue Apr 20, 2021 9:03 pm
Replies: 12
by CudaMan » Sat Apr 10, 2021 4:47 pm

First post

I want to mount a small tool box onto the running board of my 1912 Flanders, but I don't want to drill any holes in the running board. Does anyone have a pair of luggage rack brackets or an otherwise trashed luggage rack that I can cannibalize for the brackets? I hate to buy and cut up a perfectly good, complete luggage rack.

Last post

Update - I received the brackets from Dave, blasted and painted them, and mounted them to the bottom of the tool box and the running board.
I have a little touch up work to do with a brush, but I like how it turned out. Thanks again Dave! :)

12 Replies

469 Views

Last post by CudaMan
Tue Apr 20, 2021 9:03 pm
wire wheels

Last post by halftracknut « Tue Apr 20, 2021 7:32 pm
Replies: 21
by halftracknut » Thu Apr 15, 2021 7:06 pm

First post

DSCN2852.JPG I have 2 buffalo wire wheels good shape (tire on one is 30 x 3 1/2 ) are these worth anything? they look good enough to use...look solid....need blasting to make really nice... DSCN2852.JPG

Last post

jonah, sent you e-mail rl

21 Replies

1519 Views

Last post by halftracknut
Tue Apr 20, 2021 7:32 pm
1914 Windshield Hinges FS

Last post by Dan Hatch « Tue Apr 20, 2021 7:31 pm
Replies: 2
by Dan Hatch » Fri Apr 16, 2021 10:01 am

First post

Here is a nice pair of 14 windshield hinges. Have been taken apart, blasted, primed and assembled. Some pitting on back of one, see pictures. All parts are there except the split pins to lock nuts. Nobody is reproducing these that I know of. $85.00 + shipping. Email me at address in pictures. Thanks Dan
A45BD5C8-3F10-4B38-BE7B-4F09C022C845.jpeg...

Last post

Back to the top

2 Replies

215 Views

Last post by Dan Hatch
Tue Apr 20, 2021 7:31 pm
1914 Windshield Braces FS

Last post by Dan Hatch « Tue Apr 20, 2021 7:31 pm
Replies: 2
by Dan Hatch » Fri Apr 16, 2021 9:53 am

First post

Here is a nice pair of 14 windshield braces. Been blasted and primed. Not pitted, should make a nice set. $120.00 + shipping. Email me at address in pictures. Thanks Dan
0E8BBB97-39D3-4F35-9273-1C1CE35C0B53.jpeg
57A77D32-3F2C-4757-AF78-5F6C64321F4B.jpeg
83CBE93A-5531-4E83-903B-639254C6B98D.jpeg
0CB14FAF-D95B-4882-A7F0-903FB4D19F3B.jpeg

Last post

Back to the top

2 Replies

224 Views

Last post by Dan Hatch
Tue Apr 20, 2021 7:31 pm
Stevens Front Axle Inserts FS

Last post by Dan Hatch « Tue Apr 20, 2021 7:30 pm
Replies: 2
by Dan Hatch » Fri Apr 16, 2021 3:55 pm

First post

Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded

Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...

Last post

Back to the top

2 Replies

287 Views

Last post by Dan Hatch
Tue Apr 20, 2021 7:30 pm
FS: SOLAR Acetylene Hand Spot Light for Speedster or?

Last post by Bob Pilkie « Tue Apr 20, 2021 7:23 pm
Replies: 10
by Benji » Mon Mar 29, 2021 1:24 am

First post

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

Last post

Hi Bob here I’ll take that light. 780 819 7404

10 Replies

796 Views

Last post by Bob Pilkie
Tue Apr 20, 2021 7:23 pm
Police Traffic Auto Turn Device Co. turn signal, rear view mirror, for sale

Last post by Dropacent « Tue Apr 20, 2021 2:52 pm
Replies: 1
by Dropacent » Mon Apr 19, 2021 5:55 pm

First post

Amazing, quirky, Rube Goldbergish, here is one that people will remember. I believe Jay featured one of these in his amazing accessories posts. This example, I do not believe was ever mounted on a car. There is a bracket on Jays that was used to mount to a windshield frame. For a closed car or truck, that wouldn’t be needed. I’m thinking $850 for...

Last post

Patent info courtesy of Ms. Janet Block E8149062-8B66-4FDD-B7C7-F7C45512A282.png

1 Replies

475 Views

Last post by Dropacent
Tue Apr 20, 2021 2:52 pm
Re-Babbitting service , Model T main bearings

Last post by Gene_French « Tue Apr 20, 2021 2:43 pm
Replies: 7
by Gene_French » Fri Sep 11, 2020 10:16 am

First post

this is my home rebuilders special ... i re-babbitt and linebore the mainbearings in your COMPLETLY disassembled Model T motor block ... this is for standard configuration mainbearings , crankshafts and caps only ... the customer is responsible for determining the suitability of the motor block ,crankshaft , caps and bolts ... i recommend that the...

Last post

Brian:
we spoke earlier today , for everyones information ,what i mean by standard configuration is : not having to bore the bearing saddles and special caps to fit an oversize diameter crankshaft ... Model A or Chev. etc. ... the SCAT model T crankshaft is a standard configuration crankshaft and i will add that i have installed 11 and all have...

7 Replies

1228 Views

Last post by Gene_French
Tue Apr 20, 2021 2:43 pm
SOLD Chicago trans for sale SOLD

Last post by Dan McEachern « Tue Apr 20, 2021 1:14 pm
Replies: 1
by Dropacent » Tue Apr 20, 2021 1:05 pm

First post

Sold, Thanks Dan. It’s heading out your direction. SaoLD. This is a really nice Chicago transmission. These are under, direct and overdrive and are very well thought of. Just check out Clayton Paddington schooling Jay Leno utube video. This one has beautiful gears, bearings, and no known issues. Comes with an original support bracket. I believe it...

Last post

These are great transmissions- low gear is pretty much the same as a Ruckstell and overdrive is very useable. Probably one of the best aux transmissions made. They work great with a 10/40 rear end ratio.

1 Replies

247 Views

Last post by Dan McEachern
Tue Apr 20, 2021 1:14 pm
Re-babbitted main bearing caps,laminated shim set

Last post by Gene_French « Tue Apr 20, 2021 10:27 am
Replies: 4
by Gene_French » Mon Nov 30, 2020 10:59 am

First post

For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...

Last post

to the top again , thanks MTFCA

4 Replies

525 Views

Last post by Gene_French
Tue Apr 20, 2021 10:27 am
FS 1909-1912 Cast Aluminum hood handles SOLD!

Last post by Quickm007 « Tue Apr 20, 2021 9:10 am
Replies: 4
by Quickm007 » Thu Apr 08, 2021 10:53 am

First post

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

Last post

Sold to John! Thank you MTFCA and John.

4 Replies

351 Views

Last post by Quickm007
Tue Apr 20, 2021 9:10 am
ISO 26/27 coupe Door Hinge Pins

Last post by jab35 « Tue Apr 20, 2021 8:57 am
Replies: 4
by myersair » Thu Apr 15, 2021 9:37 am

First post

ISO new or like new door hinge pins for my 26 coupe.
Thanks in advance.
920-808-three 38 one
Myersair@yahoo.com

Last post

Randy: Interesting, looks like I will need to do the same at some point. Thanks for sharing, jb

4 Replies

273 Views

Last post by jab35
Tue Apr 20, 2021 8:57 am
Looking for auxiliary brakes for large drum t

Last post by Jonah D'Avella « Tue Apr 20, 2021 7:09 am
Replies: 1
by Jonah D'Avella » Thu Apr 08, 2021 5:42 pm

First post

Looking for well used aux brakes, need to fit a late rear end. Preferably inexpensive compared to new ones.

Last post

:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :roll: :|

1 Replies

307 Views

Last post by Jonah D'Avella
Tue Apr 20, 2021 7:09 am
Sold, all gone .Model NRS water manifold, LAST ONE!

Last post by Dropacent « Tue Apr 20, 2021 5:36 am
Replies: 1
by Dropacent » Mon Apr 19, 2021 6:01 pm

First post

LAST ONE SOLD. We had these made for several years now, and recently lost yet another foundry. SO, no plans right now to do more. I had 3 left from the last batch and now down to the last one.raw aluminum casting, very well done. If you own or hope to own one of these great pre-model T Ford cars, it would be smart to snag this. The originals often...

Last post

Sold, thanks!

1 Replies

293 Views

Last post by Dropacent
Tue Apr 20, 2021 5:36 am
Era T trailer chassis for sale

Last post by Dropacent « Mon Apr 19, 2021 10:40 pm
Replies: 3
by Dropacent » Mon Apr 19, 2021 4:59 pm

First post

I have this model T era chassis for sale. It will make a dandy chassis or can be easily modified to suit your needs. Shown is some forged side bed irons, I believe I have another set just like this, so 4 total, I’d be glad to include some T radius rods, extra side T frame channels, and even a decent front axle, if desired. I love the repurpose of...

Last post

The framework would need to be cut down just a bit, but the bed would work well for a stand alone trailer. Or , to use on the trailer and a runabout. Multipurpose. Thanks Rick

3 Replies

434 Views

Last post by Dropacent
Mon Apr 19, 2021 10:40 pm
Ignition Switch

Last post by Model T Matt « Mon Apr 19, 2021 8:25 pm
Replies: 2
by Model T Matt » Sun Apr 18, 2021 2:27 pm

First post

SDC18609.JPG SDC18607.JPG For Sale Nice Old Ignition Switch with Two Number 73 keys and amp meter asking $80.00 with free shipping to U.S.A call Matt 503-824-2681

Last post

Sold Headed for California-

2 Replies

415 Views

Last post by Model T Matt
Mon Apr 19, 2021 8:25 pm
Original runabout wood bed for sale

Last post by Dropacent « Mon Apr 19, 2021 5:34 pm

by Dropacent » Mon Apr 19, 2021 5:34 pm

Here is a dandy. An original model T era bed, to convert your runabout( or cut-off touring) into a pickemup truck. It’s the real deal, note the shape of where it tucks up against the body. Amazing condition, beautiful solid wood and iron hardware. I think $650 is a fair deal, but I’m all ears. I’m not using it, and would like to see it go to a...

0 Replies

344 Views

Last post by Dropacent
Mon Apr 19, 2021 5:34 pm
wtb rolling chassis

Last post by TRDxB2 « Mon Apr 19, 2021 5:17 pm
Replies: 2
by Emeraude » Mon Apr 19, 2021 2:10 pm

First post

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders running engine and a workable transmission. I would prefer 1916 and above but would consider older. Also would like to find one in the upper midwest.

Last post

You might consider this- someone could sit in t he cab and pretend their driving. I assume its still listed been on the market for 3yrs now $1000
Its in Williston, North Dakota

2 Replies

212 Views

Last post by TRDxB2
Mon Apr 19, 2021 5:17 pm
26 TT steering rod pitman arm to pass side

Last post by Andy Loso « Mon Apr 19, 2021 5:16 pm
Replies: 1
by MNCANUCK » Sun Apr 18, 2021 5:00 pm

First post

WTB steering arm with ball socket attachment for 26 TT.

Last post

Charles,

I have some. I'll shoot you an email.

Andy

1 Replies

176 Views

Last post by Andy Loso
Mon Apr 19, 2021 5:16 pm
Ruckstell Fiber Spacers

Last post by Original Smith « Mon Apr 19, 2021 2:57 pm
Replies: 26
by Original Smith » Thu Apr 15, 2021 10:20 am

First post

Wanted: NOS Ruckstell fiber thrust spacers. These look like the steel Ford spacers, but are .105 thick, and are slightly a larger diameter.

Last post

I just measured the only original I have, which is used. It is 3 7/8 O.D. The steel Ford washers are 3 3/4 . There is a slight ring around the edge, which shows no wear, and that's where I come up with the .105 measurement. I don't know what they allowed for clearance originally. I have a couple of original Ruckstell installation pamphlets, but...

26 Replies

1100 Views

Last post by Original Smith
Mon Apr 19, 2021 2:57 pm
FORD Vintage Tire gauges for sale FORD

Last post by Southfork Creek « Mon Apr 19, 2021 12:21 pm
Replies: 6
by Dropacent » Tue Mar 30, 2021 8:33 pm

First post

These are just about 100 years old now. We find them, we buy them, we take them apart, clean,oil,regulate. We polish or nickel plate the case and stem. Choice of 5 different faces. We assemble in your choice of dull nickel, then polished, or in polished brass. New clear lens, delivered to your door, $85 for brass case , $95 for nickel case.
A...

Last post

I think the faces with the higher pressure red line of 52 lbs. were for the clinchers (?)

6 Replies

709 Views

Last post by Southfork Creek
Mon Apr 19, 2021 12:21 pm
FS: 1914 Side Lamp Bracket

Last post by Benji « Mon Apr 19, 2021 10:43 am
Replies: 2
by Benji » Tue Apr 06, 2021 12:15 am

First post

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $15 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Last post

$15 work for anyone?

2 Replies

241 Views

Last post by Benji
Mon Apr 19, 2021 10:43 am
FS: 1914 Windshield Complete with Hinges and Support Rods

Last post by Benji « Mon Apr 19, 2021 10:42 am
Replies: 5
by Benji » Mon Apr 05, 2021 11:57 pm

First post

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...

Last post

still for sale, $230

5 Replies

374 Views

Last post by Benji
Mon Apr 19, 2021 10:42 am
FS: Pair of Rear Roadster Fender Irons

Last post by Benji « Mon Apr 19, 2021 10:42 am
Replies: 3
by Benji » Tue Apr 06, 2021 12:11 am

First post

Evening all,

I have here a pair (left and right) set of roadster rear fender irons. These look a bit shorter than I those for my 13. I have the measurements in photos. I dont know if they were modified, this is how I got them.

Asking $90 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and...

Last post

$90 work??

3 Replies

285 Views

Last post by Benji
Mon Apr 19, 2021 10:42 am
FS: Left Rear Roadster Fender Iron

Last post by Benji « Mon Apr 19, 2021 10:41 am
Replies: 2
by Benji » Tue Apr 06, 2021 12:13 am

First post

Evening all,

Here is a single rear roadster fender iron for the left side. In nice shape!

Asking $45 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on pickup is...

Last post

$45 for anyone?

2 Replies

228 Views

Last post by Benji
Mon Apr 19, 2021 10:41 am
WTB Disteel Rim 23" for 30x3 1/2 SRAIGHT SIDE TIRE.

Last post by George Hand « Mon Apr 19, 2021 10:26 am

by George Hand » Mon Apr 19, 2021 10:26 am

I have a friend looking for a 23 Disteel LOCK RING rim with a Rivet Latch, for use with straight sided 30x3 1/2, 31x4 NON Clincher tires. George Hand

0 Replies

75 Views

Last post by George Hand
Mon Apr 19, 2021 10:26 am
FS Early Side light brackets Price dropped! SOLD!

Last post by Quickm007 « Mon Apr 19, 2021 10:23 am
Replies: 3
by Quickm007 » Thu Apr 08, 2021 10:01 am

First post

FS Early Side light brackets, they are new and Excellent Reproduction. Asking $50 or BO for the pair plus shipping. PayPal prefered. Thank you MTFCA.
light braket.JPG light braket 2.JPG

Last post

Payment received it. Thank you

3 Replies

386 Views

Last post by Quickm007
Mon Apr 19, 2021 10:23 am
FS complete "Ford Faithful" Ouside Oiler Kit SOLD!

Last post by Quickm007 « Mon Apr 19, 2021 9:45 am
Replies: 5
by Quickm007 » Thu Apr 08, 2021 9:52 am

First post

FS complete Ford Faithful Ouside Oiler Kit. This is a reproduction of the original “Ford Faithful Oiling System” that was offered to Model T owners from 1911 through the twenties. No modifications to your original engine are needed, no holes need to be drilled. I used one time only and decided to go with different path.

Comming with:
“Ford...

Last post

Sold to Brian. Thank you Brian and MTFCA.

5 Replies

660 Views

Last post by Quickm007
Mon Apr 19, 2021 9:45 am
Corcoran headlight

Last post by CTLeonard « Mon Apr 19, 2021 9:39 am

by CTLeonard » Mon Apr 19, 2021 9:39 am

One headlight for sale. Asking 205.00 plus shipping IMG_20210419_082945580.jpg IMG_20210419_083001841.jpg IMG_20210419_083051855.jpg IMG_20210419_083027502.jpg IMG_20210419_083041560.jpg

0 Replies

140 Views

Last post by CTLeonard
Mon Apr 19, 2021 9:39 am
Done - 1976 Vintage Ford Sept/Oct

Last post by Darin Hull « Sun Apr 18, 2021 9:45 pm
Replies: 3
by Darin Hull » Sun Apr 18, 2021 3:39 pm

First post

Looking to buy a physical copy of the Sept/Oct 1976 The Vintage Ford (Volume 11 #5). I believe it had an article in it which discussed my grandpa’s crash in a 1913 Model T during the Kingdom of Calloway tour.

Darin

Last post

Cudaman,

I appreciate the heads up! eBay is a resource that never comes to mind because I use it so infrequently. Thank you, I’ve picked up a copy.

Darin

3 Replies

243 Views

Last post by Darin Hull
Sun Apr 18, 2021 9:45 pm
Gas Oil Water running board can set F/S

Last post by Layden Butler « Sun Apr 18, 2021 4:25 pm

by Layden Butler » Sun Apr 18, 2021 4:25 pm

Set of 3 cans with carrier to mount on running board, will need repair during restoration. $275 plus domestic shipping.

0 Replies

304 Views

Last post by Layden Butler
Sun Apr 18, 2021 4:25 pm
Accessory Side-view Mirror - SOLD

Last post by GEmering « Sun Apr 18, 2021 2:35 pm
Replies: 2
by GEmering » Sun Apr 18, 2021 1:04 pm

First post

Well-constructed period aftermarket side view mirror that clamps to the window frame.
$100 plus $15 shipping anywhere in the 48 states.

Thanks for looking.
Gene Emering

memering@embarqmail.com

Last post

Sold to Steve.

Thank you MTFCA

2 Replies

227 Views

Last post by GEmering
Sun Apr 18, 2021 2:35 pm
For Sale: Non-Ford but a great and significant pair of Early LARGE Bleriot All Brass Sidelamps

Last post by Rich Eagle « Sun Apr 18, 2021 10:01 am
Replies: 2
by GGZ » Sat Apr 17, 2021 1:18 pm

First post

Here are a very impressive and large pair of Bleriot Sidelamps from the pre-1915 era. These lamps are missing their lower burners and oil fonts but otherwise appear complete. As they sit, they measure about 13 1/2 in overall height. The main lamp bodies measure about 6 square and the lenses measure about 5 square. They are made to be used as oil...

Last post

Louis Charles Joseph Blériot .... was a French aviator, inventor, and engineer. He developed the first practical headlamp for cars and established a profitable business manufacturing them, using much of the money he made to finance his attempts to build a successful aircraft. - Wikipedia.
Dave Rice had told me this years ago. He had a wonderful...

2 Replies

347 Views

Last post by Rich Eagle
Sun Apr 18, 2021 10:01 am
WTB 26-27 Fordor side window holders

Last post by Tracer « Sun Apr 18, 2021 6:57 am
Replies: 1
by Tracer » Fri Apr 16, 2021 8:23 am

First post

Wanted
Still looking for all 6 of these both sides
It’s what the glass sits in. 4 in the doors and 2 in the rear side windows.

Last post

Back to the top please

1 Replies

130 Views

Last post by Tracer
Sun Apr 18, 2021 6:57 am
WTB 26-27 Fordor window garnish mould

Last post by Tracer « Sun Apr 18, 2021 6:57 am
Replies: 1
by Tracer » Fri Apr 16, 2021 8:18 am

First post

Wanted 1 26-27 Fordor garnish mould
The one that has the steps in it to hold up the glass. This is the rear side window. As per photos

Last post

Back to the top please

1 Replies

107 Views

Last post by Tracer
Sun Apr 18, 2021 6:57 am
WTB 26-27 Fordor rear side window holders

Last post by Tracer « Sun Apr 18, 2021 6:56 am
Replies: 1
by Tracer » Fri Apr 16, 2021 8:28 am

First post

Wanted
26-27 Fordor rear side window holders as per pictures

Last post

Back to the top please

1 Replies

131 Views

Last post by Tracer
Sun Apr 18, 2021 6:56 am
For Sale: 1909-25 Small Drum Rocky Mountain Brakes

Last post by havnfun « Sat Apr 17, 2021 10:24 pm
Replies: 7
by Ed Fuller » Sat Apr 17, 2021 8:48 am

First post

1909-25 Small Drum Rocky Mountain Brake setup. All that is included is shown in the pictures. I DO NOT have the brake drums.

I bought this set about nine months ago for my speedster. It was advertised as a large drum set. Unfortunately, I waited until now to try and install them and I realized that they are actually for a small drum axle and are...

Last post

Mark,

Edit your profile then go to account settings, there you can change your email addresss

7 Replies

466 Views

Last post by havnfun
Sat Apr 17, 2021 10:24 pm
For Sale - Main Cap Bolt Wrench - SOLD!

Last post by CudaMan « Sat Apr 17, 2021 7:42 pm
Replies: 2
by CudaMan » Sat Apr 17, 2021 10:50 am

First post

Somehow I ended up with two of these, so I'm selling this one. As far as I can tell it has no markings. Price is $25.00, which includes USPS Priority shipping. If interested, please PM or email me with your shipping address, and I will reply with payment instructions. Thanks! :)

Last post

The wrench is sold to Richard, thanks Richard and MTFCA!

Richard, I sent a reply to your PM, please look for it and reply with your shipping address, thanks! :)

2 Replies

274 Views

Last post by CudaMan
Sat Apr 17, 2021 7:42 pm
For Sale: Hagner Split Rim Tool

Last post by Ed Fuller « Sat Apr 17, 2021 3:48 pm
Replies: 16
by Ed Fuller » Thu Jan 17, 2019 9:21 pm

First post

This is a unique split rim tool made by a company called Hagner in Norristown, PA. Looks complete but needs to be cleaned up.

You can read the patent for it here:

$150 plus shipping in the U.S.

Last post

Sent you an email. I have another one.

16 Replies

3740 Views

Last post by Ed Fuller
Sat Apr 17, 2021 3:48 pm
Accessory timer brush NOS F/S

Last post by Layden Butler « Sat Apr 17, 2021 1:24 pm
Replies: 4
by Layden Butler » Sat Feb 27, 2021 5:35 pm

First post

NOS in the box with instructions, These were made in the 1920s and never sold! Limited number available. $30 plus $4 postage for one OR $25 each if you get 2 or more and postage will be included!

Get rid of that timer roller bounce!!

Last post

To the top.

4 Replies

662 Views

Last post by Layden Butler
Sat Apr 17, 2021 1:24 pm
Metz intake manifold wanted

Last post by Mark Osterman « Fri Apr 16, 2021 9:39 pm

by Mark Osterman » Fri Apr 16, 2021 9:39 pm

Hi all .... as it says, I’m looking for a Metz intake manifold that is interchangeable with the standard model T Ford manifold. Markosterman@icloud.com

0 Replies

209 Views

Last post by Mark Osterman
Fri Apr 16, 2021 9:39 pm
Model T Transmission Brake Drum 1909 to 1925.

Last post by Mr. T Ford « Fri Apr 16, 2021 6:48 pm
Replies: 5
by Mr. T Ford » Thu Mar 18, 2021 2:49 pm

First post

Model T Transmission Brake Drum 1909 to 1925.
$80 Each Or Best Offer.
Have Two Other Transmission Brake Drums For 1909 to 1925 Model Ts For Sale @ $80 Each Or Best Offer.

Last post

Model T Transmission Brake Drum 1909 to 1925. Drums Have Been Sold

5 Replies

780 Views

Last post by Mr. T Ford
Fri Apr 16, 2021 6:48 pm
Model T Spark Plug Whistle & For Early Cars For Sale.

Last post by Mr. T Ford « Fri Apr 16, 2021 6:46 pm
Replies: 1
by Mr. T Ford » Thu Mar 18, 2021 2:10 pm

First post

Model T Spark Plug Whistle & For Early Cars For Sale.
Have two spark plug whistles for T & Early Cars.
One whistle has tapered thread & the other has a straight thread.
$135 Each Or Best Offer Each. Hope someone can use one.

Last post

Model T Spark Plug Whistle & For Early Cars For Sale. The Whistles have been Sold

1 Replies

368 Views

Last post by Mr. T Ford
Fri Apr 16, 2021 6:46 pm
For sale 1926-7 gas tank

Last post by BobP « Fri Apr 16, 2021 2:16 pm
Replies: 2
by BobP » Wed Apr 14, 2021 8:09 pm

First post

Very solid, no rust out. it has been hanging in the shed for years, includes hangers. $225 + shipping. NO TEXTING. 507 458 6778.

Last post

Tank is sold, Thanks.

2 Replies

396 Views

Last post by BobP
Fri Apr 16, 2021 2:16 pm
31 coupe for sale. Sold thanks mtfca!

Last post by CTLeonard « Fri Apr 16, 2021 1:42 pm

by CTLeonard » Fri Apr 16, 2021 1:42 pm

Trying to slide one in. Nice coupe with all glass.needs inner wells and small patch behind pass.door. 5000.00 in southern in. IMG_20210416_123313835_HDR.jpg IMG_20210416_123329774.jpg IMG_20210416_123313835_HDR.jpg IMG_20210416_123259749_HDR.jpg

0 Replies

280 Views

Last post by CTLeonard
Fri Apr 16, 2021 1:42 pm
SOLD: A Real Good All Brass Early Jones 60MPH Speedometer

Last post by GGZ « Fri Apr 16, 2021 1:30 pm
Replies: 3
by GGZ » Thu Apr 08, 2021 4:54 pm

First post

SOLD!
Here is a really nice, all brass early Jones 60 MPH speedometer. The overall diameter is about 3 and the depth is about 2 1/2 not including the mounting bracket. It has a very clear and crisp face with strong numbers. There are no cracks in the brass body or the rim which is unusual. The original beveled glass lens is clean and without chips...

Last post

SOLD SOLD SOLD!

3 Replies

652 Views

Last post by GGZ
Fri Apr 16, 2021 1:30 pm
Open Valve Block

Last post by richc « Fri Apr 16, 2021 1:21 pm
Replies: 3
by ThreePedalTapDancer » Fri Apr 16, 2021 6:23 am

First post

Not for the wallet shy individual, but If you are need one, here you go. As seen on Tbay.

Last post

The block appears to be the one Charlie Shaver had as part of his 1910 project car.

Rich C.

3 Replies

753 Views

Last post by richc
Fri Apr 16, 2021 1:21 pm
FS I have a pair of rear axle bearings

Last post by Charles J « Fri Apr 16, 2021 1:15 pm
Replies: 1
by Charles J » Fri Apr 16, 2021 10:15 am

First post

For sale is a pair of good rear axle bearings $100 shipped in the US email me or text charles jenkins 84 @ gmail .com

Last post

On hold waiting on payment

1 Replies

279 Views

Last post by Charles J
Fri Apr 16, 2021 1:15 pm
WTB Buggy Rail

Last post by Bill Elliott « Fri Apr 16, 2021 8:43 am
Replies: 1
by Bill Elliott » Mon Apr 05, 2021 7:21 pm

First post

Still looking for a buggy rail for my 1910 Touring. This is for the top to attach to, not a robe rail. Bill, 586-651-5760.

Last post

Bump. Still looking for a buggy rail - 586-651-5760

1 Replies

225 Views

Last post by Bill Elliott
Fri Apr 16, 2021 8:43 am
FS 1926-27 gas tank

Last post by SIR TIMOTHY « Fri Apr 16, 2021 12:10 am
Replies: 3
by KimDobbins » Sun Apr 11, 2021 4:47 pm

First post

Nice used 26-27 gas tank. Very solid, pretty clean inside. $450 plus shipping. Kdmks AT att.net.

Last post

H0558-L12692522.jpg I saw 9 of these at Chickasha, all very nice ranging from $45 to $90 including mine for $50. Never even got an offer.

3 Replies

649 Views

Last post by SIR TIMOTHY
Fri Apr 16, 2021 12:10 am
WTB: 13/14 Upholstery

Last post by RichJ « Thu Apr 15, 2021 11:13 pm
Replies: 14
by RichJ » Tue Feb 09, 2021 6:31 am

First post

Does anyone have any used but decent seat/backrest covers? I'm needing some stuff to repair my new 40-year-old rodent-damaged seat and backrest. I'm not concerned about period correct as nothing else is. I'm just trying to end up with a presentable driver.
Thanks,
Rich J
561-262-0393

Last post

I plan on heading west toward calif after luray, if anyone has any decent of partial left over kits ;,possibly I can pick up!!

14 Replies

1086 Views

Last post by RichJ
Thu Apr 15, 2021 11:13 pm
Spring Mn. Model T Swap Meet.

Last post by BobP « Thu Apr 15, 2021 10:26 pm
Replies: 8
by BobP » Wed Mar 17, 2021 8:26 pm

First post

We are having our annual Model T-Model A- pre WW2 swap meet on Saturday April 17th at 7A.M. at our farm at 7525 Co. 12 Blvd. Kenyon, Mn. It is 50 Miles south of St. Paul Mn. There is room for primitive camping the day-night before. Bring your parts, cars, and period memorabilia. There will be a lunch wagon on hand. Questions call 507 458 6778,...

Last post

bttttttttt

8 Replies

994 Views

Last post by BobP
Thu Apr 15, 2021 10:26 pm
Looking for transport Atlanta Texas to Tulsa

Last post by Novice « Thu Apr 15, 2021 10:00 pm
Replies: 3
by 23ford » Wed Apr 14, 2021 7:18 pm

First post

Have a front and rear axle assembly that I heed transport from Atlanta Texas toTulsa Okla....Willing to pay......Anyone going this way?

Last post

Warren. You might try finding a backhaul trucker in need of a load So he doesn't deadhead back to His home base.
One of the best places to look for backhaul loads is on load boards, such as 123loadboard.

3 Replies

239 Views

Last post by Novice
Thu Apr 15, 2021 10:00 pm
Wanted 26-27 hood rods

Last post by Mopar_man « Thu Apr 15, 2021 9:56 pm
Replies: 1
by myersair » Thu Apr 15, 2021 8:30 pm

First post

Looking to buy a set of 26-27 hood hinge rods.
Please call, text or email me.
Thanks in advance,
Randy
920-808-3381
Myersair@yahoo.com

Last post

I would recommend you get the stainless steel ones that the vendors sell. Then when you instal them chuck them up in a drill and spin them into place.

1 Replies

116 Views

Last post by Mopar_man
Thu Apr 15, 2021 9:56 pm
Holly N-H carb ISO

Last post by myersair « Thu Apr 15, 2021 8:26 pm

by myersair » Thu Apr 15, 2021 8:26 pm

Looking for a good Holly NH carb core for a 26/ 27.
Please call, text or email me.
Thanks in advance,
Randy
920-808-3381
Myersair@yahoo.com

0 Replies

160 Views

Last post by myersair
Thu Apr 15, 2021 8:26 pm
**FOR SALE: STEVEN'S FRONT AXLE FRAME TOOL

Last post by Jack Putnam, in Ohio « Thu Apr 15, 2021 6:59 pm
Replies: 4
by Jack Putnam, in Ohio » Tue Feb 23, 2021 10:15 pm

First post

***For Sale: Steven s Front Axle repair tool Frame. Reproduced in cast iron, as the original. It is used to repair the worn king pin holes in the front axle of the Model T. This is the frame only as you will need the reamers and inserts available elsewhere.
$275 plus $15 shipping in the USA. I will accept a check or PayPal at...

Last post

Up to top again.

4 Replies

821 Views

Last post by Jack Putnam, in Ohio
Thu Apr 15, 2021 6:59 pm
Spring Carburetor sale

Last post by dmdeaton « Thu Apr 15, 2021 6:26 pm
Replies: 6
by Bruce Compton » Sat Mar 27, 2021 5:11 pm

First post

I have 6 rebuilt, tested and guaranteed Model T carbs. All are set up and ready to install, nor core charges, and all prices include shipping to Cont. USA or Canada. # 1 is a regular Holley NH ('22-'25, but can be fitted with the later adjustment for '25-'27) @$195.00. #2 is a Holley straight through with the brass throttle arm and cast choke arm...

Last post

Bruce
I will take number 2 if u still have it

6 Replies

1275 Views

Last post by dmdeaton
Thu Apr 15, 2021 6:26 pm
FS new Rear shackle set, non-original style U-style SOLD

Last post by Quickm007 « Thu Apr 15, 2021 5:00 pm
Replies: 3
by Quickm007 » Thu Apr 08, 2021 9:35 am

First post

FS new Rear shackle set, non-original style U-style. Never used. $20 for the set plus Shipping. PayPal prefered. Thank you MTFCA

New shackel set.JPG New shackel set 2.JPG

Last post

Sold to Dennis

3 Replies

250 Views

Last post by Quickm007
Thu Apr 15, 2021 5:00 pm
FS early rear Shackle set plus bushing SOLD

Last post by Quickm007 « Thu Apr 15, 2021 4:59 pm
Replies: 11
by Quickm007 » Thu Apr 08, 2021 9:43 am

First post

FS early May West rear Shackle set plus bushing. Please refer to the pictures bellow. They have some solder made by previous owner in the goal to fit well with bushing but they are in descent condition as well. . PayPal prefered. Thank you MTFCA.

Mae west.JPG Mae west 2.JPG

Last post

Sold to Dennis

11 Replies

664 Views

Last post by Quickm007
Thu Apr 15, 2021 4:59 pm
NH Full Flow Float Valves are now back in stock

Last post by Dan Hatch « Thu Apr 15, 2021 1:59 pm
Replies: 5
by Scott_Conger » Wed Apr 14, 2021 3:01 pm

First post

Have a good number of valves: Full Flow Float Valve with Lead Washer.gif

Have a fair number of specialty restoration taps, and have a small number of installation tools available, too. Install Tool and/or taps available ONLY with the purchase of a valve: Full flow valve tool.jpg

Contact me via email with questions, costs, or combinations of...

Last post

These valves are the bomb. Did I say it right? Trying to get with this new generation talk. Not working for me, the new talk. The valves work GREAT!!! Fixes a problem that needed to be addressed. If you are working on a NH you need one of these. Install tool is a must two.
Scott: when you going to make a tool for mixture jet? Put me on the list....

5 Replies

387 Views

Last post by Dan Hatch
Thu Apr 15, 2021 1:59 pm
Ford Bumpers, Gas tanks, Rear Axle parts

Last post by Joe Bell « Thu Apr 15, 2021 11:04 am
Replies: 4
by Brent Mize » Thu Apr 08, 2021 9:55 am

First post

D098BC7A-09DC-4930-A381-4149FFD3C74E.jpeg

Last post

The two round tanks are spoken for, the bumpers are spoken for.

4 Replies

750 Views

Last post by Joe Bell
Thu Apr 15, 2021 11:04 am
Wanted: Passenger side 1926-27 e-brake rod.

Last post by Jonah D'Avella « Thu Apr 15, 2021 9:44 am
Replies: 4
by ivaldes1 » Tue Apr 13, 2021 1:52 am

First post

I have a good drivers side 1926-27 brake rod, my passenger side rod is a rod but not a 1926-27 Ford e-brake rod.

Last post

i can get pictures as well

4 Replies

212 Views

Last post by Jonah D'Avella
Thu Apr 15, 2021 9:44 am
Prest-O-Lite tank regulator F/S

Last post by Layden Butler « Wed Apr 14, 2021 9:35 pm

by Layden Butler » Wed Apr 14, 2021 9:35 pm

Nice regulator with needle valve for flame size control and hose barb, fits any 6 diameter Prest-O-Lite tank. $135 domestic postage included.

0 Replies

198 Views

Last post by Layden Butler
Wed Apr 14, 2021 9:35 pm
FS Tulare ("Bakersfield") Swap meet Pre Sale Aux Transmission, Engine Blocks, Disk Wheels

Last post by Allan « Wed Apr 14, 2021 9:07 pm
Replies: 18
by Matt in California » Mon Mar 22, 2021 1:07 pm

First post

Time to clean up and make space!!! I will be in Tulare on May 1st at Space I-16.

I have a bunch of stuff and only a van. I am looking to presell as much as I can, so I know what to bring. I don't intend to ship this stuff. If you want it and don't plan to go to Tulare you will need to arrange pickup with someone who is.

I will update this top...

Last post

Thanks for the contact Matt. Now, is anyone going to the meet able to haul the 15 engine block closer to the east bay area in San Francisco? that is where our shipper operates. We an help with any extra fuel needed if that will help.

Allan from down under.

18 Replies

1031 Views

Last post by Allan
Wed Apr 14, 2021 9:07 pm
WTB Original Rear Axle Bearings

Last post by dr1960 « Wed Apr 14, 2021 8:19 pm

by dr1960 » Wed Apr 14, 2021 8:19 pm

I would like to purchase 4 gently used or new old stock rear axle bearings. I am not interested in the newer style replacement bearings without the grooves in them. Looking for some with less at a couple of thousands wear.

Thanks,

0 Replies

185 Views

Last post by dr1960
Wed Apr 14, 2021 8:19 pm
TT Truck rear axle literature

Last post by tmodeldriver « Wed Apr 14, 2021 4:13 pm
Replies: 5
by tmodeldriver » Mon Apr 12, 2021 3:45 pm

First post

Does anybody out there in T Model country have a manual for the TT rear axle that you'd be willing to sell to me or make a
copy? I need to tear into mine and replace the gears (7 1/4:1 to 5 1/6:1). Some literature would help so I won't be totally winging it. Please send me a pm if you can help. Thank you. Bob

Last post

Hi, Steven. I've ordered the Ruckstell manual as you suggested. Thanks. Bob

5 Replies

331 Views

Last post by tmodeldriver
Wed Apr 14, 2021 4:13 pm
Wide track axels

Last post by BobShirleyAtlantaTx « Wed Apr 14, 2021 3:40 pm
Replies: 2
by BobShirleyAtlantaTx » Wed Apr 14, 2021 12:59 pm

First post

FF5CBE49-78F9-479F-A3DF-38C20F0FFA21.jpeg Very nice front and rear wide track axels. The rear has the long spring with it. These were off of a late model wide track with the late pumpkin. 16? Bob at nine o three-824-1949 5DA1E252-08DF-4AB9-9B01-FBC28CD78A09.jpeg

Last post

Sold to Warren

2 Replies

348 Views

Last post by BobShirleyAtlantaTx
Wed Apr 14, 2021 3:40 pm
Wanted: Brass Acetylene Generator

Last post by TWrenn « Wed Apr 14, 2021 3:23 pm
Replies: 1
by 1912touring » Wed Apr 14, 2021 8:57 am

First post

Good morning. I am looking for an acetylene generator to use on a brass era car project. The maker of the generator is not of particular concern, but need one that is similar to the early round brass John Brown or E&J types.

If you have one available, please send me a PM through the Forum. Top dollar paid for a good, complete example.

Thank...

Last post

Contact Hugo Vermeulen from Canada. He has a nice E & J repo for sale.

1 Replies

191 Views

Last post by TWrenn
Wed Apr 14, 2021 3:23 pm
Wanted to trade 5 New Old Stock Shrader 777

Last post by CDooREDW « Wed Apr 14, 2021 12:53 pm
Replies: 10
by DaveB » Sun Apr 11, 2021 5:14 pm

First post

I have five New Old Stock Shrader 777 valve Stems complete with all original hardware excellent storage and original plating

I am looking for 8 Champion brass top take apart Number 7 park plugs would like to trade the Shrader stems plus cash depending on condition of the plugs. I can send photos to your cell phone or email.Prefer calls 507...

Last post

Hi, DaveB,

I have a #7 Champ coming to boot with some Champion X plugs I bought on the Forum. It looks to be in good shape if it would help. Let me know. I have no current need for it.

Ron

10 Replies

472 Views

Last post by CDooREDW
Wed Apr 14, 2021 12:53 pm
WTB: 2 Cylinder Ford

Last post by DaveB « Wed Apr 14, 2021 11:56 am
Replies: 16
by KiwiFordGuy » Thu Jan 14, 2021 3:47 am

First post

Hi all,

A long time since I have posted anything on this forum. So long in fact I had to create a new user name!!!! Glad it’s still going as strong as ever.

I am looking for a 2 Cylinder Ford ie A, AC, C or F if anyone knows of anything? I’d love a restored early Ford but the budget just isn’t that big... so a pretty complete and original...

Last post

Have helped a couple of guys from Australia with projects know where there is a S for sale, a lot of hard work done . Send me a email and will fill you in and if interested can put you in touch.Its more reasonable for you to call me seems strange but the two guys call me from time to time . Best to you, Dave

16 Replies

1920 Views

Last post by DaveB
Wed Apr 14, 2021 11:56 am
Sold

Last post by ModelTRoadster « Wed Apr 14, 2021 9:21 am
Replies: 1
by Junkyard4 » Tue Apr 13, 2021 7:10 pm

First post

Frame is Sold

Last post

would like to buy Thanks TOM 5857381988

1 Replies

393 Views

Last post by ModelTRoadster
Wed Apr 14, 2021 9:21 am
2 Cylinder T Engine Project

Last post by Jonah D'Avella « Wed Apr 14, 2021 9:11 am
Replies: 5
by Chad_Marcheese » Mon Apr 05, 2021 8:33 pm

First post

The time has come for me to make some decisions, so I am offering up my unfinished, but near complete 2 Cylinder T engine project. $650 Local pickup or can crate and ship in the US on your dime.
IM or email me at crazydart400 AT yahoo DOT com

I can provide as many pics as you need, many were posted on the old forums as this was a project I...

Last post

how much do you think it would take to get it running?

5 Replies

954 Views

Last post by Jonah D'Avella
Wed Apr 14, 2021 9:11 am
Very Very nice Running board luggage rack SOLD

Last post by Quickm007 « Wed Apr 14, 2021 7:54 am
Replies: 3
by Quickm007 » Thu Apr 08, 2021 9:28 am

First post

Hi I'm selling a Very nice Running board luggage rack. $45 or BO plus shipping. PayPal prefered. Thank you MTFCA.
rack.JPG

Last post

Payment received and sales completed Thank you Scott and MTFCA

3 Replies

483 Views

Last post by Quickm007
Wed Apr 14, 2021 7:54 am
Wanted: 21 inch split rim front wood wheel.

Last post by Ruxstel24 « Tue Apr 13, 2021 8:43 pm
Replies: 11
by ivaldes1 » Sat Apr 03, 2021 11:58 pm

First post

As the title says. I found my last one a ‘Bimel’ did not fit so I need one more front wheel to get my project rolling.

Last post

Message sent

11 Replies

576 Views

Last post by Ruxstel24
Tue Apr 13, 2021 8:43 pm
WTB Stromberg MB-1 choke assy

Last post by Billdizer,Spencer In « Tue Apr 13, 2021 5:36 pm
Replies: 3
by Billdizer,Spencer In » Sun Mar 07, 2021 2:13 pm

First post

I am looking to buy the removable choke assembly for a Stromberg MB-1 carburator. I will buy a parts carb to get one if you have that! PM or email bjdizeratHughes.net Thanks!

Last post

Still looking for choke assy for the carb! Thanks

3 Replies

339 Views

Last post by Billdizer,Spencer In
Tue Apr 13, 2021 5:36 pm
Wanted American LaFrance

Last post by RichardW « Tue Apr 13, 2021 5:09 pm
Replies: 5
by RichardW » Sat Apr 10, 2021 9:15 am

First post

Wanted early 4 cylinder American LaFrance, complete, or chassis, or major chassis components, motor transmission rear differential, what have you

Thanks

Richard

Last post

Still looking for 4 cylinder American LaFrance, can offer complete running 6 cylinder American LaFrance chassis for trade

Thanks

Richard

5 Replies

484 Views

Last post by RichardW
Tue Apr 13, 2021 5:09 pm
FS Kingston Carb L (1915-16) SOLD

Last post by Quickm007 « Tue Apr 13, 2021 4:39 pm
Replies: 2
by Quickm007 » Thu Apr 08, 2021 11:06 am

First post

FS Kingston Carb L (1915-16), asking $80 or BO plus shipping

Kingston Carb L.JPG Kingston Carb L A.JPG Kingston Carb L B.JPG Kingston Carb L C.JPG

Last post

Sold to Marc Thank you.

2 Replies

279 Views

Last post by Quickm007
Tue Apr 13, 2021 4:39 pm
ISO Kelsey Wheel Lugs

Last post by Grady Bruton « Tue Apr 13, 2021 12:04 pm
Replies: 9
by Grady Bruton » Fri Mar 26, 2021 12:42 pm

First post

Looking for 4 Kelsey wheel lugs like in the first attached picture. Alternatively, if those can't be found, 2 of the slanted lugs with a K stamped on them should work. Prefer the first kind with Kelsey written on them so that all my lugs will match. These are on the rear wheels of a TT.

Thanks,

Grady from Paradise, TX

Last post

Thank you everyone for your help. I've located a set of the alternate K style lugs so I can get my T back on the road.

I am still on the lookout for the original Kelsey script lugs like in the first picture that don't have ridges on each side. If anyone comes across any I would greatly appreciate it!

9 Replies

593 Views

Last post by Grady Bruton
Tue Apr 13, 2021 12:04 pm
1911 Splash Aprons FS

Last post by Tbird « Tue Apr 13, 2021 11:32 am
Replies: 2
by Tbird » Mon Mar 22, 2021 4:25 pm

First post

These are new splash aprons from Rootlieb. Never mounted. New in the box. They are for an 11 and have the bulge. These retail for about $370 new.
Selling for $270 plus shipping.

mikebird@lifeattheridge.net or 574-584-6744

IMG_8585.JPG

IMG_8584.JPG

Last post

Back to the top

2 Replies

446 Views

Last post by Tbird
Tue Apr 13, 2021 11:32 am

New Topic

9184 topics

Page 1 of 92
- Jump to page:
1
2
3
4
5
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum