Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 44423 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
4 Wheels FS
Replies: 3
by
mpetitjean » Sun Sep 26, 2021 5:10 pm
First post
4 Wood wheels No Hubs
2 30 x 3 and 2 30 x 3.5
The 2 30 x 3 are round felloe and have Firestone no skid tires - I don't think these are road safe tires.
The 2 30 x 3.5 have wards riverside tires (also likely not road worthy). 1 is round felloe 1 is square
Pickup in Northern New Jersey or I will bring to Hershey with pre-payment. No shipping....
Last post
Last Chance. Packing for Hershey tonight....
- 3 Replies
- 1937 Views
-
Last post by mpetitjean
Mon Oct 04, 2021 12:34 pm
-
-
4 pistons and 3 rods
Replies: 2
by
TBones12 » Sun Oct 03, 2021 1:32 pm
First post
I am not knowledgeable of pistons and rods etc...
This set was in a restored engine that had a connecting rod come undone and went through the 1912 block after about 4 miles of driving on it's madden voyage......The rod bent and of course discarded. The other rods and piston appear like in very good condition.
Asking $100 for the set. The...
Last post
Thanks for asking Gene, I'll on your offer to sell a nice 12 engine, I will eventually try and sell the 12 with a hole in it!
- 2 Replies
- 1013 Views
-
Last post by TBones12
Mon Oct 04, 2021 8:23 am
-
-
Tool Box
Replies: 1
by
tselliott » Tue Sep 21, 2021 4:14 pm
First post
22x9x7 high,Tool Box in solid shape. No dents, latches and hinges are in nice shape. Bottom has some rust through holes but not that bad.
$60 Plus shipping.
Scott Elliott
971-5O6-94O2
Last post
Bump to the top
- 1 Replies
- 1232 Views
-
Last post by tselliott
Mon Oct 04, 2021 12:18 am
-
-
tools--and jack
Replies: 2
by
RichardG » Sun Oct 03, 2021 8:12 pm
First post
# 105454 RAT TAIL FILES--far from worn out--$25- all,--plus ship--/#105455--ford wrench- ---red reflect-r, needs need wing nut--6-nos front wheel berg washers---head light plug--2 key ways--ect-ect--$15---105456-57-58---car jack-in wonderful condition,-- $25--all--plus shipping--i can combine to help on shipping---
Last post
items 105454-thru-5678---sold THANKS RICHARD-WILL BE IN THE MAIL TOMORROW..
- 2 Replies
- 1008 Views
-
Last post by RichardG
Sun Oct 03, 2021 9:19 pm
-
-
Stuff on truck going to Hershey
by
Burlingtontguy » Sun Oct 03, 2021 8:53 pm
The truck is loaded and ready to travel, Set of Fore doors for 1912 touring,1909 one piece oil pan, set of Non-Demountable rims ready to go to rebuild, 1912 Engine block, 1912 rebuilt short block, 1915 windshield, and a 1/2 ton of later parts. I will be in Orange Field, Call me at 401-932-3191, Thanks , Dennis
- 0 Replies
- 872 Views
-
Last post by Burlingtontguy
Sun Oct 03, 2021 8:53 pm
-
-
WANTED: 26/27 open car windshield and stanctions. Hershey pickup
Replies: 1
by
geneabb » Thu Sep 30, 2021 3:00 pm
First post
For my speedster project I'm looking for the lower half of a 26/27 touring car windshield and a pair of stanctions. Must be in good condition, especially the lower corners of the windshield--mine are rusted out totally. Hershey pickup.
Please call me on 301-512-5266 and leave a message as I'll be away from my computer until Sunday. Thanks, Gene.
Last post
Hershey's almost here--bump to the top
- 1 Replies
- 763 Views
-
Last post by geneabb
Sun Oct 03, 2021 7:49 pm
-
-
rotors rotors and rotors
Replies: 2
by
RichardG » Sun Oct 03, 2021 5:47 pm
First post
look look, you may see the one you need--i did when i bought them--takeum all for $10--shipping extra--
Last post
rotors sold thank you ED
- 2 Replies
- 1132 Views
-
Last post by RichardG
Sun Oct 03, 2021 7:45 pm
-
-
dykes 1926--book
by
RichardG » Sun Oct 03, 2021 4:56 pm
very good condition loads of information on early automobiles, model t ford included, this is where i got the information to build my coil tester, it works just fine, my car perks like a time-x.. $50.
- 0 Replies
- 726 Views
-
Last post by RichardG
Sun Oct 03, 2021 4:56 pm
-
-
- 0 Replies
- 704 Views
-
Last post by 351cmach
Sun Oct 03, 2021 3:55 pm
-
-
Hodge podge of parts including clock $20
Replies: 1
by
TBones12 » Sun Oct 03, 2021 2:09 pm
First post
Hodge podge of parts including clock
$20 for the lot
Bob I can deliver to Hershey on Thursday.
Bob
Last post
I’d take that, Bob. Tmorsher@icloud.com
- 1 Replies
- 956 Views
-
Last post by Dropacent
Sun Oct 03, 2021 3:48 pm
-
-
running boards for passenger side
Replies: 1
by
TBones12 » Sun Oct 03, 2021 2:22 pm
First post
Running Boards for passenger side.
1911-1912 according to vender catalogue.
$185 per board. Again, these are passenger side.
See other classified for a pair of right and left sided running boards.
I can deliver to Hershey on Thursday.
Bob
Last post
Oops! sorry, the they are $99 each.
- 1 Replies
- 772 Views
-
Last post by TBones12
Sun Oct 03, 2021 2:27 pm
-
-
12-13 oil pan
by
Joe Bell » Sun Oct 03, 2021 2:17 pm
Have a late 12 -13 seven rivet pan, big tea cup, long nose, it is not correct for 11-12, the pan ears are not correct looking, 250 will have at hershey. c4i29-31 Joe
- 0 Replies
- 756 Views
-
Last post by Joe Bell
Sun Oct 03, 2021 2:17 pm
-
-
fan and hub assembly
by
TBones12 » Sun Oct 03, 2021 2:07 pm
fan and hub assembly
Excellent condition.
$85
I can deliver to Hershey on Thursday,
Bob
- 0 Replies
- 671 Views
-
Last post by TBones12
Sun Oct 03, 2021 2:07 pm
-
-
brass rods
Replies: 1
by
TBones12 » Sun Oct 03, 2021 12:45 pm
First post
Brass rods. Very good condition.
They are thick, heavy and already bent which makes me think they are original or old repos.
They need to be cut down.
I will bring them to Hershey Thursday.
$250
Bob
Last post
Sent you an email
- 1 Replies
- 832 Views
-
Last post by Tbird
Sun Oct 03, 2021 1:44 pm
-
-
set of 4 pistons and rods.
by
TBones12 » Sun Oct 03, 2021 1:41 pm
This set was collected while gathering engine parts but the gentleman died before he could finish the car.
I do not know if they were used or if he found parts and put it together.
Pistons are labeled 0.060
Price for the complete set is $175
I can deliver them to Hershey on Thursday,'
Bob
- 0 Replies
- 687 Views
-
Last post by TBones12
Sun Oct 03, 2021 1:41 pm
-
-
Drive shaft
by
TBones12 » Sun Oct 03, 2021 1:20 pm
Drive shaft. Never used. Put in car but took out and used an original.
$90
I can bring it to Hershey on Thursday.
Bob
- 0 Replies
- 699 Views
-
Last post by TBones12
Sun Oct 03, 2021 1:20 pm
-
-
Rear axle shaft
by
TBones12 » Sun Oct 03, 2021 1:17 pm
Two rear axle shafts. $140
I will be at Hershey Thursday.
Bob
- 0 Replies
- 688 Views
-
Last post by TBones12
Sun Oct 03, 2021 1:17 pm
-
-
- 0 Replies
- 776 Views
-
Last post by TBones12
Sun Oct 03, 2021 12:48 pm
-
-
floating hubs for sale
Replies: 7
by
TBones12 » Sun Sep 26, 2021 1:32 pm
First post
Floating hubs. In excellent condition. $350
Bolts do not come with the set. I do not think it is missing anything except the bolts.
I can deliver them at Hershey on Thursday. I will be walking around.
See reply for more pictures.
Bob
Last post
bump bump bump
- 7 Replies
- 1773 Views
-
Last post by TBones12
Sun Oct 03, 2021 7:31 am
-
-
Wheels
Replies: 6
by
Flathead62 » Fri Oct 01, 2021 1:11 pm
First post
I have Model T wheels for sale A set of 4 for 250 Dallors. There 30 x 3 1/2 call or text 605 376 7813. These wheels are located south of Des Moines
Last post
Thanks for telling me. My thought was show a picture of the type of wheels I have post a phone number, so anyone interested could call and tell me what there looking for.Then I could put it together for them with pictures.( the pics I posted was to show the type wheels I have)
- 6 Replies
- 1676 Views
-
Last post by Flathead62
Sun Oct 03, 2021 6:22 am
-
-
FS Nice Gas tank Filler cap for a speedster
Replies: 1
by
Bill Crosby » Sat Oct 02, 2021 3:18 pm
First post
FS Nice Filler cap for a speedster gas tank with 4 square plate to help mount the assembly. $85 + shipping or can deliver to Hershey.
Last post
Bill, I sent you a PM.
- 1 Replies
- 1019 Views
-
Last post by Shannon_in_Texas
Sat Oct 02, 2021 10:00 pm
-
-
Brand new 28x3 clincher rims at Hershey
Replies: 4
by
Mike Lebsack-Iowa » Wed Sep 29, 2021 6:44 pm
First post
I will bring the last of my 28x3 clincher rim stock to Hershey. I have 8 and I will not be having any more made so when these are gone that is it, at least from me. I am bringing a very limited number of 30x3.5 clincher rims as well. Some of these are already spoken for. It has been very challenging to get these new rims produced so here is likely...
Last post
Update 10/1/21: I now have only 4-28x3 new clincher rims left and will have them at Hershey unless spoken for in advance. Thanks to you folks who have been contacting me along the way to Hershey. Mike
- 4 Replies
- 1257 Views
-
Last post by Mike Lebsack-Iowa
Sat Oct 02, 2021 5:54 pm
-
-
FS Boyco Can
Replies: 1
by
Bill Crosby » Sat Oct 02, 2021 2:05 pm
First post
One Red Boyco Can In nice condition. One small dent. 9 3/8 wide 10.0 High 2 3/4 thick. $50.00 + Shipping or can deliver to Hershey.
Last post
I will take it.
- 1 Replies
- 1101 Views
-
Last post by Bob McDaniel
Sat Oct 02, 2021 5:27 pm
-
-
WTB 1927 Tudor Front Seats
by
colonelpowers » Sat Oct 02, 2021 5:27 pm
I am needing a correct set of front seats for a 27 Tudor. I previously found a set in California but we haven't figured out how to get them to Virginia so I thought I would try to find another set. If anyone were to find anything at Hershey please feel free to call me. If we could possibly work out some way for me to pick them up from you, I could...
- 0 Replies
- 639 Views
-
Last post by colonelpowers
Sat Oct 02, 2021 5:27 pm
-
-
Brass radiator at Hershey
by
Divcoone » Sat Oct 02, 2021 2:19 pm
Used brass radiator removed from a Speedster when a new one was found at a good price. Radiator worked fine, didn’t overheat. Had been tanked and repaired. $300 at Hershey
- 0 Replies
- 949 Views
-
Last post by Divcoone
Sat Oct 02, 2021 2:19 pm
-
-
FS Weaver headlight Tester, Aiming Device
by
Bill Crosby » Sat Oct 02, 2021 2:15 pm
This Weaver headlight Tester, Aiming Device would make a great addition to a period garage. It has great patina with all original decals and paint. If you have any questions send me an Email through this site. $75 + shipping or I can deliver to Hershey.
- 0 Replies
- 756 Views
-
Last post by Bill Crosby
Sat Oct 02, 2021 2:15 pm
-
-
Unusual 1911 straight-axle 6” rear hubs
by
Chris Paulsen » Sat Oct 02, 2021 11:08 am
We’ve got a pair of straight axle rear hubs. Most are 5 1/2” in diameter. These are just over 6”, making them (I believe) late production, just before switching to tapered axles and hubs. Will be at Hershey at RSE 20-22.
- 0 Replies
- 978 Views
-
Last post by Chris Paulsen
Sat Oct 02, 2021 11:08 am
-
-
- 0 Replies
- 526 Views
-
Last post by 56myway
Sat Oct 02, 2021 2:40 am
-
-
26/27 model T wire wheels F/S
Replies: 1
by
elliott1936 » Fri Oct 01, 2021 2:46 pm
First post
I have a set of wire wheels that I took off my speedster to install a set of Ask three Bolt wire wheels. The wheels are painted a light green and in nice condition. They are located in Portland Oregon. I am selling for $500.00 for the set of Five. Pictures will be available on request. I think these are hard to ship so pick up at my address is in...
Last post
email sent
- 1 Replies
- 1053 Views
-
Last post by Ken Buhler
Sat Oct 02, 2021 1:39 am
-
-
SOLD: A Nice Unknown Early Aluminum Intake Manifold 1912-1914'ish REO or ?
Replies: 2
by
GGZ » Fri Sep 10, 2021 6:03 pm
First post
Here is a very nice, early high quality aluminum intake manifold. I was told it is for a 1912-1914'ish REO the Fifth (Thanks, Dave M.) Maybe could be adapted to a Model T overhead or ?
The intake port holes are about 1 3/8 and the mounting flange holes are about 2 1/2 center to center.. The carburetor hole is about 1 1/4 and the carburetor...
Last post
would make a nice downdraft
- 2 Replies
- 1554 Views
-
Last post by brassford
Fri Oct 01, 2021 11:22 pm
-
-
Brass T parts coming to Hershey
Replies: 4
by
Mike Lebsack-Iowa » Wed Sep 29, 2021 6:54 pm
First post
For you brass enthusiasts looking for some of the essential goodie parts for pre-15 Ts. I will be at GBL34 in the Green Field. I have some nice resurfaced low heads, two very rare and restored early brass carburetors, and some new “old replacement” stock brass radiators that have never been installed. I have an exceptionally nice set of 23-25...
Last post
Tourabout, did not see your email so sent you one.
- 4 Replies
- 1668 Views
-
Last post by Mike Lebsack-Iowa
Fri Oct 01, 2021 9:57 pm
-
-
FS Runabout Shaped Set of T Parts - With Pictures
Replies: 3
by
Monty 98 » Thu Sep 30, 2021 8:19 pm
First post
We are selling our 1920'ish T runabout, which we purchased in 2014.
It appears that chassis and body are a different year. Engine casting date is January 1920 (see photo). Engine # places engine assembly as the same month. After purchase, we cleaned up, refurbished and rewired numerous components and car was made drivable. Engine runs on...
Last post
I have sent you a pm
Ralph
- 3 Replies
- 1512 Views
-
Last post by Ralph F
Fri Oct 01, 2021 9:30 pm
-
-
15 Brass radiator for sale
by
12chalmers » Fri Oct 01, 2021 7:28 pm
I have a 15 brass radiator, 14 Hood, Texas T waterpump for sale. Email me or phone for details. 801-694-9828 ewilliam01@msn.com
- 0 Replies
- 784 Views
-
Last post by 12chalmers
Fri Oct 01, 2021 7:28 pm
-
-
key
Replies: 5
by
SparkTag » Thu Sep 30, 2021 11:13 am
First post
WTBUY Need a CLUM key #84 Give me a shout. Thank you for your time
Last post
Here are the ones on eBay;
Not a key expert, but the DB stands for Dodge Brothers cars. Do not know if Clum supplied different tumblers for Dodge Brothers than other cars of the era that used the same key number. You will note the peaks and valleys on both keys are pretty much the same.
- 5 Replies
- 1584 Views
-
Last post by Mark Gregush
Fri Oct 01, 2021 2:10 pm
-
-
Early low head
Replies: 1
by
Larry LaPatka » Thu Sep 30, 2021 2:08 pm
First post
048A9614-5DA1-49AD-A53C-7BB3B124873C.jpeg Perfect condition early low head. Great threads, magnafluxed and surfaced. $200.00 plus freight
Larry LaPatka
Email: ltlapatka@gmail.com
Home: 423.623.5656
Cell: 423.237.8846
Last post
That's a high head!
- 1 Replies
- 958 Views
-
Last post by Philip Lawrence
Fri Oct 01, 2021 2:06 pm
-
-
Hershey stuff
by
Chris Paulsen » Fri Oct 01, 2021 9:30 am
We'll have our usual bunch of random stuff at Hershey. Of particular interest may be a pair 1922 one-piece spindles and a pair of 1911-12 clam-shell rear axle housings with 2-piece driveshaft. The housings and drive shaft need some of the rivets replaced, but are otherwise very good, clean, straight pieces. We're not done packing, and I'm sure...
- 0 Replies
- 805 Views
-
Last post by Chris Paulsen
Fri Oct 01, 2021 9:30 am
-
-
Installing a Warford.
Replies: 6
by
Chris Haynes » Thu Sep 30, 2021 2:48 pm
First post
What is involved with installing one of the new Warford's? Do they come with the shortened driveshaft like the Mitchell's do?
Last post
Yea, but the ending was pretty successful!!!
Thanks to you & your TEAM!!!!!!. The guy saved a few bucks & much of the tour.
We still talk about it. Thanks again on his behalf.
- 6 Replies
- 1428 Views
-
Last post by speedytinc
Fri Oct 01, 2021 8:20 am
-
-
WTB 26/27 Rear Axle Housings
Replies: 4
by
Mark Chaffin » Wed Sep 22, 2021 10:04 am
First post
Looking to purchase a few non-drain plug side 26/27 rear axle housings for our Ruckstell production. The tube and brake flange need to be in good condition. Can pay $10.00 each. Any help appreciated.. Can pick them up at the Tulare Swap Meet. Mark Chaffin (951) 805 0928.
Last post
Yes. For sure! Hoping to pick a few up at Tulare.
- 4 Replies
- 1276 Views
-
Last post by Mark Chaffin
Thu Sep 30, 2021 9:49 pm
-
-
FS Sprint Car Buffalo Wheels, Tires, Hubs/Spindles/Caps
Replies: 2
by
Henry K. Lee » Mon Jun 14, 2021 4:09 pm
First post
Three are 20 with lock rings and one is 21 with lock ring for the right front (old school). $3,200.00 Firm. Pick up only, email or text if interested. Sorry the rear hubs are not shown but are there.
IMG_3595.jpeg
IMG_5672.jpeg
All the Best,
Hank
Last post
XXXXXXXXXX
- 2 Replies
- 1543 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 4:46 pm
-
-
- 2 Replies
- 928 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 4:34 pm
-
-
- 0 Replies
- 742 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 3:08 pm
-
-
For sale oil lamp door hinge pin set
Replies: 1
by
FATMAN » Wed Sep 29, 2021 2:58 pm
First post
A set of 3 brass oil lamp axle pins for the round type oil lamp lens,
special 6.50 a set plus postage
815-633-7244
modelt2001@comcast.net
Bob
Last post
Sorry wrong place
- 1 Replies
- 879 Views
-
Last post by FATMAN
Thu Sep 30, 2021 1:47 pm
-
-
Rajo outside Oil Gauge for sale $180 ppd
Replies: 4
by
Dropacent » Wed Jul 28, 2021 1:25 pm
First post
I have XXXXXXabout 15 XXXX UPDATE, NOW 6 of these left in the drawer. If you have an interest but not ready, just give me a shout and I’ll have miss Connie put your name on one. You can always change your mind with no hard feelings. Never any pressure here. After that, unlikely more will be made by us. Lost another USA foundry, and the core box...
Last post
I'll take one
- 4 Replies
- 1497 Views
-
Last post by Southfork Creek
Thu Sep 30, 2021 1:28 pm
-
-
- 0 Replies
- 663 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 12:43 pm
-
-
FS Early Flat Top Fenders.., Pie Wagon or Speedster
by
Henry K. Lee » Thu Sep 30, 2021 12:40 pm
No running boards or hood former, this is for the front and rear fenders and splash aprons. These are early reproductions of the late 1960's/1970's. Never installed, very light surface rust (barn type) which will come off easy with Evapo-Rust. $1,000.00. You collect or will box up at an extra fee, weigh/dimensions sent to you for your shipping...
- 0 Replies
- 687 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 12:40 pm
-
-
- 0 Replies
- 602 Views
-
Last post by Gary T
Thu Sep 30, 2021 12:24 pm
-
-
'13 Roadster Body Tin (Available at Hershey)
Replies: 1
by
Steve Davis » Tue Sep 28, 2021 11:21 am
First post
!913 roadster sheet metal, complete with correct turtle deck; wood in turtle deck and door good. Hershey spaces GDF 21-23 near lamp post 84 in front of the Giant Center.
Last post
emailed you about the roadster sheet metal.
- 1 Replies
- 1065 Views
-
Last post by Benji
Thu Sep 30, 2021 12:00 pm
-
-
WTB Hand Crank Coil Tester / FRAUD ALERT
Replies: 16
by
Mark Chaffin » Tue Sep 21, 2021 11:14 pm
First post
Looking to purchase a good HCCT. TOP Loader preferred. Similar to the one shown below.. Will be attending the Tulare swap meet. Thank you. Mark Chaffin (951) 805-0928.
135405.jpg
Last post
Mark, if the coil tester is for a collection of vintage test equipment, good luck in your pursuit. If the goal is to adjust Model T coils for optimal engine performance, you may wish to consider the ECCT coil tester. More information here: www.modeltecct.com
- 16 Replies
- 3262 Views
-
Last post by MKossor
Thu Sep 30, 2021 9:15 am
-
-
NEW 1926/27 Fordor Front Window Regulator Small Gear
Replies: 1
by
henryford2 » Wed Sep 22, 2021 12:25 pm
First post
I water jet cut these specifically for my 1926 Fordor 4 hole front window regulator, they may fit others but I won't have a clue as to which. You may have to dress the teeth slight to make them burr free, but otherwise it's a very nice water jet cut part. Cut from .125 material as the original, they are NOT hardened so they may wear out in the...
Last post
Back to the top, then back on the shelf
- 1 Replies
- 747 Views
-
Last post by henryford2
Thu Sep 30, 2021 7:46 am
-
-
- 3 Replies
- 1281 Views
-
Last post by Schweck1914
Thu Sep 30, 2021 7:18 am
-
-
FOR SALE - 1924 CALIFORNIA LICENSE PLATE MATCHED PAIR
by
Jay In Northern Ca. » Wed Sep 29, 2021 10:51 pm
These plates are in excellent near new shape and just need to be painted the proper colors for the year. I checked them out with DMV a while back and they were clear in the system. Asking $165 plus postage. When painted these go for $350 + from plate Dealers when available.
1924 plates 1.jpg 1924 plates 2.jpg
Please use this email address...
- 0 Replies
- 647 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 10:51 pm
-
-
- 1 Replies
- 947 Views
-
Last post by Bill Everett
Wed Sep 29, 2021 10:39 pm
-
-
Early parts at Hershey
by
Larry Debaugh » Wed Sep 29, 2021 9:58 pm
6 rivet rear, 2 piece drive shaft and radius rods $3500, 09/10 steering column w/bracket $1500, Kingston 5 Ball, Holly 4150, Square Hole trans cover, brass lights…. Spaces CM45,46 Larry
- 0 Replies
- 936 Views
-
Last post by Larry Debaugh
Wed Sep 29, 2021 9:58 pm
-
-
- 0 Replies
- 690 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:40 pm
-
-
- 0 Replies
- 680 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:34 pm
-
-
SOLD! EXHAUST WHISTLE SETUP WITH CUTOUT AND KICK PEDAL
by
Jay In Northern Ca. » Wed Sep 29, 2021 5:29 pm
This is a complete setup with a brand new never used exhaust cutout. Asking $225 plus postage for the setup plus postage.
Exhaust Whistle Setup 1.jpg Exhaust Whistle Setup 2.jpg Exhaust Whistle Setup 3.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg
- 0 Replies
- 711 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:29 pm
-
-
- 0 Replies
- 564 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:12 pm
-
-
Friday Deadline for Hershey Orders
Replies: 1
by
Ashley » Wed Sep 29, 2021 1:46 pm
First post
Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!
Last post
Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!
Ashley,
This would be my first year doing so. If I put together...
- 1 Replies
- 885 Views
-
Last post by Retro54
Wed Sep 29, 2021 1:51 pm
-
-
MORE OLD FORD PARTS
Replies: 3
by
RichardG » Tue Sep 28, 2021 11:16 pm
First post
picture #104869 & 70----SET RESTORED 1921 VERMONT PLATES-$75- --- all in picture #104861 $20----- --band link---- hub cap-ford------hub cap ??------oil sight assy-------clear glass dash light lenz -----new gm stop light switch- works with the t.-----all in---picture # 104862 SOLD--three mag plugs-one out side oil plug, --new stop light...
Last post
items in photo 104863---sold, thank you--Shannon--
- 3 Replies
- 1577 Views
-
Last post by RichardG
Wed Sep 29, 2021 1:00 pm
-
-
Parting out my 1921 Touring
Replies: 1
by
Philip Lawrence » Mon Sep 27, 2021 12:04 am
First post
I've decided to part out my 1921 touring project. Disassembly starts tomorrow! If you need something let me know contact me for more information. I plan to sell the body off last unless someone just has to have it sooner.
Last post
Private message sent.
- 1 Replies
- 1112 Views
-
Last post by Chris Haynes
Wed Sep 29, 2021 12:23 pm
-
-
Hershey parts!
Replies: 2
by
bobster1 » Tue Sep 28, 2021 10:07 pm
First post
Hi Folks, Hershey is right around the corner, please come by and visit, I will have Model T Parts, NRS Ford Parts, Curved Dash Olds, some early Buick and other early Brass era things for sale. I have extra chairs, water and conversation!
Regards, Bob Richmon
Last post
Great Chris, look forward to meeting you!
- 2 Replies
- 1193 Views
-
Last post by bobster1
Wed Sep 29, 2021 7:59 am
-
-
WTB Gas Cap Gas Gauge
by
hddennis » Wed Sep 29, 2021 12:43 am
Looking for a period gas tank gas gauge for my 1917 Maxwell. I recently saw one on an unrestored Maxwell that I'm assuming was a period aftermarket accessory and am awaiting more details but thought I'd ask if anyone has one they don't know what it fits. It has a circular clock face with a revolving needle set into the cap. Cap has 1 5/8 female...
- 0 Replies
- 670 Views
-
Last post by hddennis
Wed Sep 29, 2021 12:43 am
-
-
looking for 26 27 radiator in good condition
by
NY John T » Wed Sep 29, 2021 12:22 am
Hi All,
I'm looking to replace my now useless radiator. I would like to find a good, used, NOT leaking radiator for the 26-27. I will be going to Hershey next week on Thursday and can pick it up then if anyone has one. Please contact me here or at: jkillelea@optonline.net
Thanks.
John
- 0 Replies
- 561 Views
-
Last post by NY John T
Wed Sep 29, 2021 12:22 am
-
-
Swap items for sale at HERSHEY!
Replies: 1
by
Bill Kerndt » Tue Sep 28, 2021 4:27 pm
First post
Gentlemen:
I have a list of things that I and a friend will have at Hershey and I thought I would list them and our location in the event you were interested.
I will be adding to this list as time goes by.
We will be in GBL 29, which is the Green Field and we are close to the Giant Center.
1. Model S Coil with 4 Coils (Approx 1908}
2. Simmons...
Last post
I am interested in your model S coil. Sent you an email and a pm
- 1 Replies
- 1134 Views
-
Last post by Grntea
Tue Sep 28, 2021 8:53 pm
-
-
FS Reeder Distributors
Replies: 5
by
Henry K. Lee » Tue Jun 29, 2021 4:27 pm
First post
I have 2 very good used ones with all the parts and instructions ready to install. $240.00 each with shipping in the lower 48. Email if interested.
IMG_5743.jpeg
IMG_5672.jpeg
All the Best,
Hank
Last post
Sold, Thanks MTFCA!
- 5 Replies
- 2196 Views
-
Last post by Henry K. Lee
Tue Sep 28, 2021 6:57 pm
-
-
19-27 Starter Bendix cover and parts
Replies: 2
by
Tbird » Thu Sep 23, 2021 8:03 pm
First post
I have a cover and some bendix parts. One of them has a pulley for a belt and is used, the other is new. The Bendix parts do not look like Ford parts. Someone probably knows more about them than I do.
$10 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9511.JPG
IMG_9512.JPG
Last post
Thanks will do I’ll just add it to my scrap pile 😂
- 2 Replies
- 940 Views
-
Last post by Tbird
Tue Sep 28, 2021 4:34 pm
-
-
Parts taken off my 14
Replies: 2
by
12chalmers » Tue Sep 21, 2021 4:06 pm
First post
I have replaced the brass radiator, Hood, Texas T water pump and top boot on my 1914 touring. Those parts are for sale. Please email for pictures and price. Jim Williams ewilliam01@msn.com. Thanks
Last post
The Boot and radiator have been sold.
- 2 Replies
- 1476 Views
-
Last post by 12chalmers
Tue Sep 28, 2021 3:26 pm
-
-
SOLD: A Nice Original Ford Script Oil Can
by
GGZ » Tue Sep 28, 2021 2:23 pm
SOLD!
Here is a nice, clean, original example of the popular Ford script oil can. Still has lots of copper plating remaining and the Ford script is nice and sharp.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.
Please email: motoringicons@hotmail.com or call 734-730-4274. I do not check PMs and probably will...
- 0 Replies
- 737 Views
-
Last post by GGZ
Tue Sep 28, 2021 2:23 pm
-
-
SOLD: Original "Reduce The Gas Tax" License Plate Topper
by
GGZ » Tue Sep 28, 2021 2:20 pm
SOLD!
Here is a neat license plate attachment that I am guessing dates from the 1920s or 1930s. It measures 3 by 11 3/4 . It is in very good original condition with nice original paint. A nice piece of automobilia that would great on any early car.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.
Please email...
- 0 Replies
- 733 Views
-
Last post by GGZ
Tue Sep 28, 2021 2:20 pm
-
-
- 0 Replies
- 690 Views
-
Last post by Steve Davis
Tue Sep 28, 2021 11:15 am
-
-
Canopy top for TT fs. Sold
by
CTLeonard » Tue Sep 28, 2021 11:04 am
Abe the TT has a canopy top on him he doesn't like, and would like to get rid of. Believe this to be the real deal, some of the stakes have rotted away, but for nothing else it's a great pattern to start with. Has the metal corner brackets.im in mt.vernon in. You would have to pick up.i went through the trouble of getting it off another truck, I'm...
- 0 Replies
- 690 Views
-
Last post by CTLeonard
Tue Sep 28, 2021 11:04 am
-
-
A FEW MORE THE THINGS FORD T
Replies: 1
by
RichardG » Mon Sep 27, 2021 7:57 pm
First post
COIL BOX COVER--$10/ QUICK CHANGE BANDS $45 / FENDER BRACKET LOOKS BAD BUR STILL WILLING-$5/ PLUS SHIPPING, INS IS -UP- TO YOU IF YOU WANT IT,
Last post
COIL BOX LID SOLD, THANK YOU KEVIN--
- 1 Replies
- 1019 Views
-
Last post by RichardG
Tue Sep 28, 2021 8:50 am
-
-
Free: Frame
Replies: 6
by
Philip Lawrence » Sat Sep 25, 2021 8:51 am
First post
I have a 1919 -1920 frame with the forged running board brackets which need to be straightened as they are bent up. The rivets in the front crossmember have been replaced with bolts. If someone can use it they can have it for free. It's located in Auburn, CA . You can call me at 530-five five nine-1440. I also have several very nice frames of...
Last post
Hey there Phil, I haven't seen it. I just looked again.
- 6 Replies
- 1599 Views
-
Last post by Wayne Sheldon
Tue Sep 28, 2021 4:48 am
-
-
21--2-3--4--model t parts
Replies: 1
by
RichardG » Mon Sep 27, 2021 5:15 pm
First post
steering wheel 16 inch fordite, very good,--$25/ WOODEN DASH ? LOW, GOOD SHAPE--$25/ STEEL DASH W BRACKETS V GOOD LOW, $45/ THREE INCH TIRE TOOL, NO IDEA MAKE OFFER, PLUS SHIPPING--INS EXTRA IF--U--WANT IT,
Last post
Hi Richard I would like to purchase the bands if still available. and have a fiend the needs a wood fire wall for his center door if that one is a fit? The Scandinavia ones.
Craig.
602 769 zero two five seven
- 1 Replies
- 946 Views
-
Last post by Craig Leach
Tue Sep 28, 2021 1:29 am
-
-
- 0 Replies
- 649 Views
-
Last post by Mark Gregush
Mon Sep 27, 2021 10:22 pm
-
-
21--2-3--4--model t parts
Replies: 2
by
RichardG » Mon Sep 27, 2021 5:01 pm
First post
BOX FULL OF MODEL T GASKETS, MANIFOLD---HEAD- --TRANSMISSION- -ENGINE----TRANSMISSION RETURN SPRING AND LATCH--$50.00 LOT--/---SMALL BRASS MOTOR METER --$50.00--- ALL--PLUS SHIPPING--INS EXTRA IF -U- WANT IT--
Last post
MOTOR METER AND GASKET SET SOLD--THANK YOU BRAD
- 2 Replies
- 1071 Views
-
Last post by RichardG
Mon Sep 27, 2021 8:41 pm
-
-
License plate bracket WTB
Replies: 1
by
Patrick » Thu Sep 23, 2021 6:56 pm
First post
I am looking for a license plate bracket to use for mounting a right side brake light on my 23 runabout. Please email me if you have one to spare. Edit: I found one at Lang's.
Thanks
Pat Sweeney
Last post
Thanks to those who helped me. I found one at Lang's.
- 1 Replies
- 854 Views
-
Last post by Patrick
Mon Sep 27, 2021 7:55 pm
-
-
U&J carburetor venturi and float
Replies: 2
by
Corey Walker » Mon Sep 27, 2021 4:00 pm
First post
New aluminum venturi and float made from closed cell nitrophyl foam. Screws for float will be included. $45 plus $8.45 USPS flat rate box shipping. Email: wlkma9@gmail.com
Last post
Items are sold.
- 2 Replies
- 865 Views
-
Last post by Corey Walker
Mon Sep 27, 2021 7:48 pm
-
-
Himico Accessory transmission setup F/S
Replies: 2
by
Layden Butler » Sun Jun 20, 2021 2:19 pm
First post
Unrestored but substantially complete Himico brand accessory engine pan and 3 speed transmission with reverse that replaces the Model T planitary transmission. Happy to answer questions and supply more pictures. Asking $950, prefer pick up here in Northern Cal but can get in a box on a pallet and deliver to your area freight arrangement.
Last post
To the top!
- 2 Replies
- 1514 Views
-
Last post by Layden Butler
Mon Sep 27, 2021 6:44 pm
-
-
Antique Clothing PICKED UP
Replies: 2
by
modeltbarn » Wed Sep 22, 2021 10:44 pm
First post
I’ve got a large box of old clothes that my parents wore in the HCCA. Most of these were my moms; she was short, between 5-1 and 5-3, and average size, not heavy at the time. I’d like to pass these on to someone that will use them. Some are true antiques, some are from the 60’s and were made for daytime dresses to wear on tours. There are also...
Last post
These have found a home.
- 2 Replies
- 1395 Views
-
Last post by modeltbarn
Mon Sep 27, 2021 6:18 pm
-
-
Holley Model S float
by
Corey Walker » Mon Sep 27, 2021 3:53 pm
2 screw Holley float made from modern closed cell nitrophyl foam. $15 plus $8.45 shipping USPS flat rate box. Email: wlkma9@gmail.com
- 0 Replies
- 672 Views
-
Last post by Corey Walker
Mon Sep 27, 2021 3:53 pm
-
-
Need transport
Replies: 1
by
T Cruiser » Sun Sep 26, 2021 3:05 pm
First post
I need a rear end minus tube and arms hauled from Ventura to Tulare swap meet. I will pay a $100.00 to anyone willing to bring it to swap meet. Thanks, Ted 503-728-3476
Last post
I found someone to deliver the rear end. Thanks Ted
- 1 Replies
- 760 Views
-
Last post by T Cruiser
Mon Sep 27, 2021 3:26 pm
-
-
Wanted Rajo or Frontenac radiator script
Replies: 4
by
spedur » Thu Sep 23, 2021 10:28 pm
First post
Im looking to buy a Rajo or Frontenac radiator script, or is any one reproducing them ? contact durocar@aol.com
Last post
Yes Steve. Yours is beautiful. I want that too!!
- 4 Replies
- 1186 Views
-
Last post by Southfork Creek
Mon Sep 27, 2021 2:55 pm
-
-
Split Rim Tool #2 FS
Replies: 5
by
Dan Hatch » Sun Sep 12, 2021 2:40 pm
First post
Another Split Rim tool. This one looks to be NOS. This is an Altas, the king of rim tools. $75.00 + shipping. Email me at address in pictures. Thanks Dan
91BEC9BB-F5E5-4E3B-AEAF-24B82C27FFE6.jpeg
8B709499-0A1D-45C9-AC2C-18EE4278D713.jpeg
B4E42AFE-720A-4CEC-A12D-26D1E8C058C2.jpeg
Last post
Sold pending payment. Thanks
- 5 Replies
- 1497 Views
-
Last post by Dan Hatch
Mon Sep 27, 2021 2:52 pm
-
-
Small Drum External Brakes - SOLD
Replies: 3
by
OldFord » Sun Sep 26, 2021 12:05 pm
First post
I have a pair of small drum external Model T brakes for sale. I thought they were AC brand, but now not sure. $75. Will be in Hershey C4Y 34-37. 518-755-0986
Frank
Last post
Those look like APCO
Craig
- 3 Replies
- 1077 Views
-
Last post by Craig Leach
Mon Sep 27, 2021 8:57 am
-
-
For Sale at Hershey
Replies: 1
by
Burlingtontguy » Sun Sep 26, 2021 7:40 pm
First post
What do you need for parts with free delivery to Hershey? Send me an e-mail or Call me at 401-932-3191 so I can load the truck, Thanks, Denis
Last post
Dennis. I sent you an email.
- 1 Replies
- 1028 Views
-
Last post by Dave Young
Mon Sep 27, 2021 6:48 am
-
-
For Sale: Loads of Model T parts
Replies: 6
by
Philip Lawrence » Tue Sep 21, 2021 10:18 pm
First post
After years of collecting parts for different projects that I'll realistically never get to, I've decided to pass these parts on to those that can have a real need for them. Most are chassis parts, frames, front ends, rear ends, engines, and transmissions. There is also a multitude of smaller parts to numerous to mention here.
These parts range...
Last post
Dan, What can I do? She was born under a wandering star. It's really hard to keep up!
- 6 Replies
- 2265 Views
-
Last post by Philip Lawrence
Sun Sep 26, 2021 11:49 pm
-
-
- 0 Replies
- 734 Views
-
Last post by Layden Butler
Sun Sep 26, 2021 3:58 pm
-
-
1926/27 REAR SPRING PERCHES NOS & USED
Replies: 1
by
henryford2 » Tue Sep 21, 2021 3:52 pm
First post
1 NOS 26/27 rear spring perch and two others well used, for a total of 3 perches and pair of bushings. Perhaps from the 3 you can make a usable pair. They are not reproduced. $65 for all 5 pieces (3 perches, 2 bushings) and that includes shipping in the CONUS. Please respond to jandulics@gmail.com...
Last post
Sunday bump to the top, one is NOS and the others repairable (?) NOT being reproduced so originals are your only option!
- 1 Replies
- 890 Views
-
Last post by henryford2
Sun Sep 26, 2021 9:24 am
-
-
Two touring doors For Sale
Replies: 1
by
fordrelic » Sat Sep 18, 2021 3:41 pm
First post
I have a pair of rear touring doors. Good wood also have hardware, $250 plus shipping. model T touring doors 2.jpg model t touring doors.jpg
Last post
Fall is a super time to drive those T's.
- 1 Replies
- 1029 Views
-
Last post by fordrelic
Sun Sep 26, 2021 8:19 am
-
-
Wanted 28x3 tires
Replies: 3
by
FlyingMerkel » Sat Sep 11, 2021 7:17 pm
First post
I am looking for original 28x3 tires. I’m even interested in tires that are falling apart. I bought a nice set on here but they ended up being newer than I needed.
Please call Daniel
831-278-2742
I have email problems so phone calls are preferred.
Last post
Back to the top
- 3 Replies
- 1587 Views
-
Last post by FlyingMerkel
Sun Sep 26, 2021 2:21 am
-
-
Fs 14 engine running $1850
Replies: 3
by
Nv Bob » Wed Sep 08, 2021 11:39 am
First post
Looken sell spare 14 engine that a runner
Babbitt good with shims throughout
Low head narrow nose 3 rivet pan
Trans rebiult
Runs on magneto
Kevlar bands
Has ring gear and has starter hogs head with starter not installed currently
Has good manifolds will need pedals carb timer
Asking 1850 obo
.pickup here or figure shipping uship.com good source...
Last post
Going on tbay
- 3 Replies
- 1778 Views
-
Last post by Nv Bob
Sun Sep 26, 2021 12:49 am
-
-
- 0 Replies
- 712 Views
-
Last post by Layden Butler
Sun Sep 26, 2021 12:01 am
-
-
Mercury/ ford speedster steering column Brkt for sale
Replies: 3
by
Dropacent » Wed Mar 04, 2020 3:17 pm
First post
This is a recast steering column support bracket for the mercury bodied speedster. I built it up for use as a foundry pattern, so it has a lot of bondo on it. They were originally made for the T style diamond shape column. It’ll probably need some work, but a good start if you need it. $40 postage paid to you door. Tmorsher@icloud.com to reach me....
Last post
Thanks Tim. CNC machine here I come.
- 3 Replies
- 2166 Views
-
Last post by Southfork Creek
Sat Sep 25, 2021 10:52 pm
-
-
For Sale: Engines
by
Philip Lawrence » Sat Sep 25, 2021 4:57 pm
I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.
- 0 Replies
- 898 Views
-
Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
-
-
For Sale: Engines
by
Philip Lawrence » Sat Sep 25, 2021 4:57 pm
I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.
- 0 Replies
- 681 Views
-
Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
-
-
Wtb JW brown #16 has bonnet
by
Nv Bob » Fri Sep 24, 2021 11:58 pm
Looking to buy or find some to pull a dent out of a nonmetallic
Jw brown model 16 gas headlight
Contact
Bob
Jalopyt@yahoo.com
- 0 Replies
- 664 Views
-
Last post by Nv Bob
Fri Sep 24, 2021 11:58 pm
-
-
WTB T period correct "stop" light
Replies: 3
by
speedy19 » Fri Sep 24, 2021 12:49 pm
First post
I am in search of a Model T period correct red stop light assy. if you can help please PM me.
Thanks Steve
Last post
Sold, thanks !
- 3 Replies
- 1122 Views
-
Last post by Dropacent
Fri Sep 24, 2021 10:35 pm
-
-
SOLD “The oil your motor craves”SOLD
Replies: 2
by
Dropacent » Thu Sep 23, 2021 6:43 pm
First post
Craveroiler SOLD Dandy little accessory for the firewall of your bug. Well made, I’d think swell to keep the top end of that overhead with a little oil, or feed it to your valves through that hole a lot of you have plugged on the intake. Donnie Brown had a big mention of this with his recent resurrection of his original Bug. Tmorsher@icloud.com to...
Last post
Sold, thanks
- 2 Replies
- 1166 Views
-
Last post by Dropacent
Fri Sep 24, 2021 10:00 pm
-
-
For Sale: 1909 - 1913 Rear crossmember SOLD
Replies: 1
by
Philip Lawrence » Fri Sep 24, 2021 9:18 am
First post
This early crossmember is is rusty and pitted but can be saved. You can use this to convert your later frame to the earlier style.$100.00 plus shipping.
Last post
I'll take it.
Thanks Mike
- 1 Replies
- 803 Views
-
Last post by Michael Paul
Fri Sep 24, 2021 8:14 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum