Classifieds - Parts - Page 3

Classifieds - Parts

New Topic

19843 topics

Page 3 of 199
- Jump to page:
Previous
1
2
3
4
5
…
199
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

45161 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Pull start for a Model T

Last post by DavidGMeier « Fri Apr 05, 2024 3:33 pm
Replies: 19
by DavidGMeier » Tue Jan 17, 2023 1:27 am

First post

WTB - does anyone have a Pull start for a Model T?

Last post

Not yet but I will.

Thanks

19 Replies

2691 Views

Last post by DavidGMeier
Fri Apr 05, 2024 3:33 pm
WTB machined front hub for speedo

Last post by Larry Debaugh « Fri Apr 05, 2024 9:22 am
Replies: 2
by mklooksup » Thu Apr 04, 2024 7:04 pm

First post

I'm looking for a machined front hub to accommodate a speedometer gear for my McLaren wire wheels.
If someone has one available to sell please let me know.

Thanks

Manny Kourounis

Last post

I have some hubs for a speedometer gear, sent you an email , Larry Debaugh

2 Replies

344 Views

Last post by Larry Debaugh
Fri Apr 05, 2024 9:22 am
WTB Steering Column for 1912

Last post by Scott Rosenthal « Fri Apr 05, 2024 8:18 am
Replies: 24
by Distagon2 » Tue Apr 02, 2024 12:06 pm

First post

Looking for a 1912 Steering Column, preferably complete in restored or decent restorable condition. Contact me at eight zero three, two two six, six four three two. Or email at Distagon2 at aol dot com.

Last post

Hi Greg:
If you intend to drive this car, the later 5:1 steering is recommended. A 26/27 complete column is inexpensive, where this provides you with the 5:1 gears and the upper steering shaft parts. Any non 26/27 lower shaft is easily attached first with all thread, then welded and ground to the cleanup diameter.
Once retrofitted, this safety...

24 Replies

928 Views

Last post by Scott Rosenthal
Fri Apr 05, 2024 8:18 am
WTB - Closed car window opening/lowering straps

Last post by Walt Wise « Fri Apr 05, 2024 6:23 am
Replies: 2
by Walt Wise » Mon Apr 01, 2024 8:54 am

First post

Hoping someone has some old original straps that they would part with, preferably light brown. Maybe, if you did a complete restoration on your car, you might have these still laying around? Let me know what you have and some pics Please. Send me an email or PM through this site. Much Thanks!!! Walt Wise

Last post

Still looking!!!

2 Replies

291 Views

Last post by Walt Wise
Fri Apr 05, 2024 6:23 am
FS: Early Cast-or Forged- Steering Wheel Spiders

Last post by George House « Fri Apr 05, 2024 5:43 am
Replies: 2
by George House » Fri Mar 29, 2024 4:45 pm

First post

Sandblasted and powdercoated glossy black. All 4 ‘arms’ rest evenly on flat surface. Top steering wheel spider has 2 internal keyways opposite each other. Only $75 each + USPS small flat rate box for either or both. 12.5”+- center to center opposite ‘arms’
gwhouse731(at)gmail(dot)com

Last post

Will sacrifice the powdercoated steering wheel spiders for $75 each and 3rd one for $55….

2 Replies

527 Views

Last post by George House
Fri Apr 05, 2024 5:43 am
WTB a model T pull start for my 1919 touring

Last post by DavidGMeier « Fri Apr 05, 2024 1:36 am

by DavidGMeier » Fri Apr 05, 2024 1:36 am

Does anyone have s as working pull start for a model t?

0 Replies

320 Views

Last post by DavidGMeier
Fri Apr 05, 2024 1:36 am
1909-1925 Hall Scott Shifter

Last post by Model T Matt « Thu Apr 04, 2024 10:44 pm
Replies: 3
by Model T Matt » Wed Mar 27, 2024 7:47 pm

First post

Have rebuilt Hall Scott Shifter fits 1909-1925-asking $250.00 includes shipping call Matt 503-82four-268one

Last post

fits a Ruckstell 2 spd rear axle used for shifting slide gear- this has been sold Thanks

3 Replies

669 Views

Last post by Model T Matt
Thu Apr 04, 2024 10:44 pm
Top Saddle.

Last post by RustyFords « Thu Apr 04, 2024 8:28 pm
Replies: 2
by RustyFords » Wed Apr 03, 2024 8:05 pm

First post

Looking for a top saddle for my 24 Touring. One of mine fell off during a drive.

My car is an old patina car, so I’m looking for an old not perfect part…not a new shiny one.

Text me at 281-seven eight seven-8418 or email at rustyfordsATgmail.com

Thanks
Don

Last post

Thanks. :) :)

2 Replies

395 Views

Last post by RustyFords
Thu Apr 04, 2024 8:28 pm
Lunkenheimer brass hand pump F/S

Last post by Layden Butler « Thu Apr 04, 2024 7:24 pm

by Layden Butler » Thu Apr 04, 2024 7:24 pm

All brass Lunkenheimer brand hand pump, works great. $65 including domestic postage.

0 Replies

369 Views

Last post by Layden Butler
Thu Apr 04, 2024 7:24 pm
FS. Nice original 1912/1913set of brass hood latches

Last post by Larry « Thu Apr 04, 2024 4:42 pm
Replies: 1
by Larry » Thu Apr 04, 2024 3:18 pm

First post

Unusual set of brass hood latches that came off a late 1912 early 1913 touring car. These latches are the double ear solid brass latches. Some will argue that they only produced the single ear brass in 1912 and switched to the steel double ear in 1913 but these were the original Latches on the car and they are not reproductions.
Price $100 +...

Last post

Sold,
Thank You,
Larry

1 Replies

339 Views

Last post by Larry
Thu Apr 04, 2024 4:42 pm
How to Unstrangle your Kingston L-4... The New Kingston Super Valve - SOLD OUT

Last post by lochiel « Thu Apr 04, 2024 3:01 pm
Replies: 2
by Scott_Conger » Wed Mar 29, 2023 3:39 pm

First post

A number of folks who expressed an interest in these have failed to follow through, so I am left with a few spares that I did not anticipate having. Contact me through email if you are interested in owning one. There is not an unlimited supply and I am still conflicted as to the real need/demand for these things, so please understand that it is...

Last post

Hi interested in your super valve Any left if so how much? Thanks Jeff Arizonia 775-427-7979 lockwoodeljeff@gmail.com

2 Replies

727 Views

Last post by lochiel
Thu Apr 04, 2024 3:01 pm
Oil Can and Mount.

Last post by RustyFords « Thu Apr 04, 2024 1:37 pm
Replies: 1
by RustyFords » Wed Apr 03, 2024 8:03 pm

First post

I’m looking for a firewall mounted oil can and the associated mount for my 24 Touring. My car is old patina car so I’m looking for an old, yet serviceable part. Not a new shiny one.

Text me at 281-seven eight seven-8418 or email me at rustyfordsATgmail.com

Thanks
Don

Last post

I have one on the way.

Thanks Larry.

1 Replies

510 Views

Last post by RustyFords
Thu Apr 04, 2024 1:37 pm
Brass Era Accessory Dash Clock

Last post by Larry « Thu Apr 04, 2024 12:53 pm
Replies: 1
by Larry » Thu Apr 04, 2024 12:05 pm

First post

This is a beautiful original brass Dash clock made by the New Haven clock company, New Haven, Connecticut. The original porcelain face is in beautiful original condition, as is the brass case. The case measures 4 inches in diameter and is sloped at an angle to face the driver when mounted. The mechanism will need serviced, comes with key.
Price...

Last post

Sold
Thank You,
Larry

1 Replies

335 Views

Last post by Larry
Thu Apr 04, 2024 12:53 pm
Waukesha Ricardo head for a fordson

Last post by milkmanfishn « Thu Apr 04, 2024 11:00 am

by milkmanfishn » Thu Apr 04, 2024 11:00 am

A little off topic, any interest in a Waukesha Ricardo head for a Fordson tractor.
Call or text 262-483-nine 5 two 1. Can send pictures via cell phone.

0 Replies

416 Views

Last post by milkmanfishn
Thu Apr 04, 2024 11:00 am
New batch of Stevens insert ready FS

Last post by Dan Hatch « Thu Apr 04, 2024 10:55 am
Replies: 65
by Dan Hatch » Thu Jun 15, 2023 4:37 pm

First post

Just finished a new run of Upper and Lower Stevens Front Axle Inserts. Sorry, but yes there is a price increase.
Upper Tapered Inserts $4.25 each
Lower Threaded Inserts $6.25 each
All + shipping. Email me at address in the pictures. Thanks Dan
IMG_2391.jpeg
IMG_0598.jpeg
IMG_0260.jpeg

Last post

Back to the top

65 Replies

4626 Views

Last post by Dan Hatch
Thu Apr 04, 2024 10:55 am
FS MODIFIED ENGINE (SOLD)

Last post by Mark Chaffin « Thu Apr 04, 2024 10:44 am
Replies: 5
by Mark Chaffin » Thu Mar 07, 2024 4:41 pm

First post

This engine (August 1926) came out of a recent estate sale. It has new babbit mains and rods. Chevy crank conversion with larger rods. Reground camshaft. Unknown grind. .040 aluminum pistons. Valves were also replaced. Comes with rebuilt transmission, hogshead and a four dip pan. Been sitting for many years and dirty. Will require complete...

Last post

Sold to Scott.

5 Replies

1099 Views

Last post by Mark Chaffin
Thu Apr 04, 2024 10:44 am
26-27 Kevlar Bands

Last post by Model T Matt « Wed Apr 03, 2024 11:49 pm
Replies: 1
by Model T Matt » Wed Apr 03, 2024 7:05 pm

First post

Set of new unopened Kevlar Bands for a 26/27 T asking $120.00 shipped to your door call Matt 503-82four-268one

Last post

sold pending payment

1 Replies

325 Views

Last post by Model T Matt
Wed Apr 03, 2024 11:49 pm
FS Mechanical Ahooga Hand Horn (SOLD)

Last post by ThreePedalTapDancer « Wed Apr 03, 2024 7:59 pm
Replies: 1
by ThreePedalTapDancer » Fri Mar 22, 2024 1:37 pm

First post

Here is a very nice original Handphone made by the Automobile Supply Mfg. Company. It has nice paint and tag. No damage. Works great and is quite loud. Ready to mount and use. 9 inches length. 225 includes shipping.

IMG_0479.jpeg

Last post

This horn was in direct competition with Stewart Warner and others, it is a very nice horn and will be sure to generate interesting conversation at the next meet. Ready to bolt on and use.

1 Replies

411 Views

Last post by ThreePedalTapDancer
Wed Apr 03, 2024 7:59 pm
Coil Box

Last post by Model T Matt « Wed Apr 03, 2024 7:06 pm
Replies: 1
by Model T Matt » Wed Apr 03, 2024 6:58 pm

First post

Needs reworked comes with new hardwood - appears switch body has been repaired in its past includes new repo key asking $75.00 shipped to your location call 503-82four-268one ask for Matt

Last post

Sold Thanks Richard

1 Replies

284 Views

Last post by Model T Matt
Wed Apr 03, 2024 7:06 pm
FOR SALE:1921 TOURING SHEET METAL. AS IS.

Last post by Tom Donnelly « Wed Apr 03, 2024 6:22 pm
Replies: 3
by Tom Donnelly » Sun Oct 29, 2023 2:26 pm

First post

L & R FRONT FENDERS, L & R REAR FENDERS, HOOD, L & R SPLASH APRONS. NO RUNNING BOARDS. NO MOUNTING BRACKETS. AS IS $100. MUST PICK UP IN MID-MISSOURI (COLUMBIA AREA). PLEASE SEND AN EMAIL IF YOU’RE INTERESTED. THANKS!

Last post

Tom, the only item that remains is the hood assbly. If you're interested please contact me at five 7 three eight O eight ten forty.

3 Replies

557 Views

Last post by Tom Donnelly
Wed Apr 03, 2024 6:22 pm
stevens tool

Last post by JTT3 « Wed Apr 03, 2024 10:52 am
Replies: 1
by robertw413 » Wed Apr 03, 2024 2:30 am

First post

in search of a stevens front tool with tap and reamer if you bought one for a job and no longer need it i would like to rent or possibly buy

Last post

Robert it may be easier to take it to someone that will repair your front axle for a fee. No ill will intended but the reamers /taps are so expensive (north of $500 shipped) that if you have the set up you’re a bit particular about their use. A lot of folks with less experience using taps & reamers could ruin a set quickly. Again this is just a...

1 Replies

456 Views

Last post by JTT3
Wed Apr 03, 2024 10:52 am
FS: Reduced Price ! 1915-16 Windshield and Cowl Lamp Brackets

Last post by George House « Wed Apr 03, 2024 9:23 am
Replies: 1
by George House » Sat Mar 30, 2024 12:54 pm

First post

Only $55 plus USPS Medium Flat Rate Box

Last post

Then how about $55 + mailing ?

1 Replies

381 Views

Last post by George House
Wed Apr 03, 2024 9:23 am
FS: Reduced Price ! Ford Metal Rear Window Frame…

Last post by George House « Wed Apr 03, 2024 9:20 am
Replies: 2
by George House » Sat Mar 30, 2024 12:49 pm

First post

…for touring and roadsters. All small machine screws and nuts are there. Will need minor straightening. Only $34 plus the ride. gwhouse731(at)gmail(dot)com

Last post

Then how about $34 + actual mailing ?

2 Replies

299 Views

Last post by George House
Wed Apr 03, 2024 9:20 am
Misc. Parts + Accessories F/S

Last post by jaybee47 « Wed Apr 03, 2024 8:58 am
Replies: 4
by Jeff Perkins » Mon Apr 01, 2024 6:38 pm

First post

All items sold! Thank You MTFCA!

Last post

Jeff. $ on the way. Many thanks. Jay.

4 Replies

723 Views

Last post by jaybee47
Wed Apr 03, 2024 8:58 am
SOLD: Stromberg LF - really cheap ZOOM

Last post by JSteele « Tue Apr 02, 2024 10:35 pm
Replies: 9
by Scott_Conger » Tue Mar 26, 2024 4:49 pm

First post

Complete LF (other than minor items listed below)
not as good as an OF, but not $400, either
'Way better than an NH

complete including the float (and the larger version acorn nut which no one makes)

there's a dent on the inlet which affects nothing, but can be straightened (by you) - can be seen on one picture

missing adjuster retaining...

Last post

Scott sorry I spaced out your parts production.

9 Replies

848 Views

Last post by JSteele
Tue Apr 02, 2024 10:35 pm
For Sale: Model TT Parts (Sold)

Last post by StevenS « Tue Apr 02, 2024 9:26 pm
Replies: 1
by Philip Lawrence » Mon Apr 01, 2024 1:22 pm

First post

I have for sale the following parts:

One TT truck frame $100.00.

One complete rebuilt TT Ruckstell rear axle assembly, includes radius rods, driveshaft, and brake rods $500.00.

One TT Ruckstell rear axle minus radius rods and driveshaft. This was previously listed at $500.00 reduced to $250.00.

Two emergency brake levers $25.00 each.

I'm...

Last post

I wish I was not so far from you.

1 Replies

401 Views

Last post by StevenS
Tue Apr 02, 2024 9:26 pm
SOLD 17 18 coil box

Last post by BarrettR « Tue Apr 02, 2024 8:03 pm
Replies: 3
by Karl Von Neumann » Tue Mar 26, 2024 12:22 pm

First post

Coil box with top for 17 and 18 does need to be rebuilt wood is falling apart. Condition of the switch is unknown no key 50$ plus the ride

Last post

Please email some pics to myhartsdelight2014@yahoo.com

3 Replies

428 Views

Last post by BarrettR
Tue Apr 02, 2024 8:03 pm
FS Hand Crank Siren (SOLD)

Last post by ThreePedalTapDancer « Tue Apr 02, 2024 6:51 pm
Replies: 2
by ThreePedalTapDancer » Sat Mar 16, 2024 3:09 pm

First post

Here is a very nice early hand cranked fire, ambulance or police siren. It is heavy duty, cast aluminum. Precision steel internal gears. Heavy cast steel mounting bracket. Very very loud! Has brass brake button on back to silence it quickly. No serious damage or repairs, just a small nicks here and there on housing. Works great, very clean, and is...

Last post

Video of operation added.

2 Replies

621 Views

Last post by ThreePedalTapDancer
Tue Apr 02, 2024 6:51 pm
Kingston L-4 for parts

Last post by Scott_Conger « Tue Apr 02, 2024 5:12 pm
Replies: 1
by Scott_Conger » Thu Mar 28, 2024 2:08 pm

First post

rusty but not a disaster

what you get:

needle
friction nut
ugly float that will likely work fine
flapper
flapper hinge
throttle and choke shafts and plates
rusty body

what you won't get:
you won't get a bowl

$25 plus actual shipping

EMAIL ME FOR INFO OR ANY KIND OF RESPONSE

IMG_20240328_113118.jpg IMG_20240328_113136.jpg

Last post

Everyone wants a flapper or a flapper hinge until one is actually offered for sale

If I still own this in a week, it's getting pitched

too much junk

too little interest

1 Replies

306 Views

Last post by Scott_Conger
Tue Apr 02, 2024 5:12 pm
For Sale: 3 Holley "G"s parts only - not complete

Last post by Scott_Conger « Tue Apr 02, 2024 5:07 pm
Replies: 1
by Scott_Conger » Thu Mar 28, 2024 1:59 pm

First post

you are looking at: 3 completely stripped cast iron bodied Holley G s

there are no jets
there are no idle tubes
there are no venturis
there are no bowls

they are stripped

you will get:

3 stripped bodies (one modified on the mounting flange)
3 tops
3 needles
3 clamp nuts

they are all pretty clean with little corrosion and for the money, will...

Last post

IF you know who to call, you can find spray needles for $30+
IF you bought these, you'd have $90 worth of needles

If you call any of the suppliers, you can buy adjuster nuts for $3+
if you bought these, you'd have $9 of nuts

I'll burn $20 dollars in fuel to go to town and back take these to the Post Office, so I'm not going to get rich from...

1 Replies

302 Views

Last post by Scott_Conger
Tue Apr 02, 2024 5:07 pm
Sold: Pair of carbs

Last post by Adam « Tue Apr 02, 2024 2:39 pm
Replies: 1
by Adam » Tue Jan 23, 2024 3:21 pm

First post

Sold

These are a matched pair of 1950’s Ford Tractor carbs that would make a good inexpensive dual carb setup on your home made manifold. 2+3/8 bolt centers & 1+1/16 bore. The rebuild kit with gaskets & parts for these is readily available for around $15. The carbs look to be in good condition inside.

$50 includes Free Shipping anywhere inside...

Last post

Carbs are sold

1 Replies

575 Views

Last post by Adam
Tue Apr 02, 2024 2:39 pm
FS Tractor Unit Coils

Last post by Plankhill « Tue Apr 02, 2024 1:40 pm
Replies: 2
by Plankhill » Tue Apr 02, 2024 7:13 am

First post

For Sale: Four Tractor Unit coils in as found condition. $60 for the lot Tractor coils2.jpg Tractor coils.jpg plus $20 postage US only

Last post

Tractor Unit is stamped on the narrow side of the coils.

2 Replies

378 Views

Last post by Plankhill
Tue Apr 02, 2024 1:40 pm
Rear axle Hyatt roller bearings SOLD

Last post by Layden Butler « Tue Apr 02, 2024 12:44 pm
Replies: 3
by Layden Butler » Sun Mar 24, 2024 6:28 pm

First post

Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

Last post

Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

3 Replies

625 Views

Last post by Layden Butler
Tue Apr 02, 2024 12:44 pm
FS: Walden 6318 Engine Block/Oil Pan Special Wrench

Last post by NealW « Tue Apr 02, 2024 11:07 am
Replies: 2
by NealW » Sun Mar 31, 2024 8:14 pm

First post

For Sale: A Walden Worcester #6018 9/16” speed wrench with the 6418 attachment that turns this speed wrench into a one man tool for loosening or tightening 9/16 inch size bolts and nuts commonly found on Model T motors. The combination of the two was sold as the #6318 by Waldon (see ad below).

Unlike other speed wrenches of this type, the 6418...

Last post

Sold pending payment

2 Replies

431 Views

Last post by NealW
Tue Apr 02, 2024 11:07 am
FS wood wheel hubs 16 to 27

Last post by Karl Von Neumann « Tue Apr 02, 2024 10:47 am
Replies: 5
by Karl Von Neumann » Thu Mar 14, 2024 10:33 am

First post

Hubs are 40$ea plus the ride I have a ton of them

Last post

Back to top

5 Replies

638 Views

Last post by Karl Von Neumann
Tue Apr 02, 2024 10:47 am
FS: Set Crank and Cam Straight Cut (Spur) Gears

Last post by George House « Tue Apr 02, 2024 9:58 am
Replies: 1
by George House » Fri Mar 29, 2024 4:38 pm

First post

Really Nice condition. I have them in both 1914s and they’re not loud. Designed for pre generator Fords.
Only $90 pr. + USPS small flat rate box.
gwhouse731(at)gmail(dot)com

Last post

No rust on either gears. In deference to my Forum Friends, this is only ***btt*** until this ad falls into obscurity

1 Replies

329 Views

Last post by George House
Tue Apr 02, 2024 9:58 am
30-31 top irons and bows fs

Last post by CTLeonard « Tue Apr 02, 2024 8:40 am
Replies: 2
by CTLeonard » Mon Jan 22, 2024 3:35 pm

First post

Newly fabricated irons as close as I can get them. Had a foundry pour the blocks as Henry did. Also have the individual pieces for those bent ones. The ones everybody grabs hold of to get in! Top bows and header included. The price is 1850.00 plus shipping. Welcome to inquire on separate pieces. These fit the 30-31deluxe roadster...

Last post

Xxxxxxxxxxxx

2 Replies

394 Views

Last post by CTLeonard
Tue Apr 02, 2024 8:40 am
Bosch Parts

Last post by Model T Matt « Tue Apr 02, 2024 12:05 am
Replies: 3
by Model T Matt » Wed Mar 27, 2024 7:43 pm

First post

Have Gears and Shafts and lock nuts marked Bosch 1 -2 -3-4 asking $220.00 for all shipped to your door call Matt 503-82four-268one

Last post

Parts Have been Sold Thanks

3 Replies

551 Views

Last post by Model T Matt
Tue Apr 02, 2024 12:05 am
Rubes double threaded reed and sleeves SOLD

Last post by JTT3 « Mon Apr 01, 2024 6:51 pm
Replies: 1
by Tbird » Mon Apr 01, 2024 5:49 pm

First post

Here is a Rubes reed that is double threaded. This is correct for late 12-14. The reed is placed on the bulb end.
This came out of an original Rubes rubber bulb.
I think the threads are the 41/64 x27 but could be wrong.
The other sleeve end still has some horn tubing remnants inside.
$30 plus shipping

mikebird@lifeattheridge.net...

Last post

I’ll be your Huckleberry. Thanks

1 Replies

285 Views

Last post by JTT3
Mon Apr 01, 2024 6:51 pm
Hand air pump speedster F/S

Last post by Layden Butler « Mon Apr 01, 2024 6:51 pm

by Layden Butler » Mon Apr 01, 2024 6:51 pm

Original hand air pump from the teens and 1920s, solid brass, plated which could be stripped off. $225, including domestic postage .

0 Replies

321 Views

Last post by Layden Butler
Mon Apr 01, 2024 6:51 pm
Sold Pending Payment:Brass Holley “G” core

Last post by George Hand « Mon Apr 01, 2024 5:00 pm
Replies: 1
by tselliott » Mon Apr 01, 2024 3:55 pm

First post

SOLD Pending Payment
Holley “G” Three-screw top cover plate. “Pat. Dec. 22, 1914” cast in the cover plate. I have not opened it up.
Appears to be a nice solid rebuildable core. Choke and throttle shafts move freely.
$65 OBO plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Steve, I will take that carb!!!! George Hand 13141

1 Replies

230 Views

Last post by George Hand
Mon Apr 01, 2024 5:00 pm
SOLD Brass Side Mirror

Last post by tselliott « Mon Apr 01, 2024 4:29 pm

by tselliott » Mon Apr 01, 2024 4:29 pm

SOLD
Nice mirror in nice shape. I believe this is a reproduction/aftermarket.
$65 OBO plus shipping.
Scott Elliott
971-5O6-94O2

0 Replies

331 Views

Last post by tselliott
Mon Apr 01, 2024 4:29 pm
F/S Hastings Taper Gage NEW Lower price

Last post by Craig Leach « Mon Apr 01, 2024 3:44 pm
Replies: 7
by Craig Leach » Fri Mar 15, 2024 10:46 pm

First post

Period Hastings Taper Gage in box ( box not super great) Absolute Guarantee will replace or repair without charge at any time gage fails to
function is printed on the box. was $100 now $80 Now $75+ the ride. six0two-7six9-0two57 IMG_2991.jpg IMG_2992.jpg
Craig. IMG_3004.jpg

Last post

Hi Jennifer,
There is more combustion pressure & less oil at the top of the cylinder so the rings tend to cause more wear @ the top.
The rings don't travel all the way down the cylinder so there is also less wear @ the bottom Of the cylinder. Excessive
taper will cause the rings to flex & break or not make good contact with the cylinder leading...

7 Replies

789 Views

Last post by Craig Leach
Mon Apr 01, 2024 3:44 pm
FS: Round Gas Tank….

Last post by George House « Mon Apr 01, 2024 2:19 pm

by George House » Mon Apr 01, 2024 2:19 pm

…with brackets. Langs lists new at $360 for 1913-1920 w/o mounting brackets. This is only $100 + new repop gas cap. It has solder repair but I sacrificed 2 gallons of gas in it without a leak. Recommend interior sealing. Local pick up only. gwhouse731(at)gmail(dot)com

0 Replies

373 Views

Last post by George House
Mon Apr 01, 2024 2:19 pm
FS: Depot Hack Plans by Dickens 1982

Last post by Karl Von Neumann « Mon Apr 01, 2024 12:30 pm
Replies: 4
by Rodger Erickson » Sun Mar 31, 2024 4:29 pm

First post

FS a set of woodworking plans for a depot hack, originals by Charles Dickens of Porterville, CA, 1982. Consists of 3 D-size Sheets. Good condition. Asking $10 not including shipping.

tdpth01.jpg

tdpth02.jpg

Thanks for looking!

Last post

Email sent

4 Replies

417 Views

Last post by Karl Von Neumann
Mon Apr 01, 2024 12:30 pm
*SOLD* one piece 3101 B crankcase cover nut plate

Last post by NealW « Mon Apr 01, 2024 12:26 pm
Replies: 1
by NealW » Mon Apr 01, 2024 9:01 am

First post

I was doing some T spare parts spring cleaning this weekend, and I have decided to sell this early one piece crankcase pan inspection cover nut plate ring for sale. One of the pictures shows a possible weld repair at some time in the past.

Priced accordingly at $25, which includes priority mail shipping within the US.

Please contact me using...

Last post

Sold pending payment

1 Replies

301 Views

Last post by NealW
Mon Apr 01, 2024 12:26 pm
WTB….oil filler.

Last post by WorldChamp1914 « Mon Apr 01, 2024 11:22 am
Replies: 9
by WorldChamp1914 » Tue Mar 05, 2024 8:38 pm

First post

Any out there? IMG_4432.png

Last post

Good photo….don’t remember seeing that one before.

9 Replies

1026 Views

Last post by WorldChamp1914
Mon Apr 01, 2024 11:22 am
Hand Pumps

Last post by Model T Matt « Mon Apr 01, 2024 9:38 am
Replies: 2
by Model T Matt » Wed Mar 27, 2024 9:07 pm

First post

have 3 Hand pumps 125.00 for all includes shipping call Matt 503-824-268one

Last post

Pumps held pending payment Thanks

2 Replies

509 Views

Last post by Model T Matt
Mon Apr 01, 2024 9:38 am
T trailer FS

Last post by bryan831daniel « Mon Apr 01, 2024 9:07 am
Replies: 6
by colonelpowers » Sat Mar 30, 2024 4:42 pm

First post

The old trailer is ugly but solid. With different wheels stuck on it I towed it home and it pulled smooth and straight. It comes with an old set more 16 inch rims that have T hubs welded on. I have had them on and they run pretty well. I was going to fix it up but I have enough projects. $300

Last post

Thank you. I’d like to buy it if you’re planning to be there that Friday. PM sent. ~Bryan

6 Replies

819 Views

Last post by bryan831daniel
Mon Apr 01, 2024 9:07 am
Glass Visor for open car FS

Last post by colonelpowers « Sun Mar 31, 2024 9:43 pm
Replies: 4
by colonelpowers » Wed Mar 27, 2024 8:42 pm

First post

This visor came off of an unrestored 26 Touring and was probably only the old car for its entire life. It is in very nice condition and complete with original paint and glass. I can't decide what color the glass actually is. On the car I always thought it was black but looking through it at my shop lights it had a green hue. Either way it is very...

Last post

$250 plus shipping.

4 Replies

671 Views

Last post by colonelpowers
Sun Mar 31, 2024 9:43 pm
F/S Winfield carb model M 201B nice cond.

Last post by Reno Speedster « Sun Mar 31, 2024 8:34 pm
Replies: 1
by spedur » Sun Mar 31, 2024 6:34 pm

First post

nice cond. and complete, barrel turns freely. Includes the ball shaped intake heater with choke. asking $450. contact me for pictures.

Last post

Email sent

1 Replies

353 Views

Last post by Reno Speedster
Sun Mar 31, 2024 8:34 pm
Need parts for JO Brown Carbide Generator

Last post by Mike Lebsack-Iowa « Sun Mar 31, 2024 8:18 pm
Replies: 2
by Serge » Sun Mar 31, 2024 11:32 am

First post

Good morning
I have a Carbide Generator JO Brown all in brass for my T 1909. I am looking for the 2 locks with brass handles, mine are in black painted steel. thumbnail_IMG_4524.jpg

Last post

Sorry, the one’s that I used to make are the reunion/butterfly nut type, all brass.

2 Replies

299 Views

Last post by Mike Lebsack-Iowa
Sun Mar 31, 2024 8:18 pm
W.t.b. Front model t hubs that have been modified for model a wheels please call Ron at 420-220-4744

Last post by Rjackson « Sun Mar 31, 2024 7:02 pm
Replies: 3
by Rjackson » Sun Mar 31, 2024 12:02 pm

First post

Model t hubs that have been modified to take a model a wheels
Call Ron 420-220-4744

Last post

Thanks Craig i will look into all this info.

3 Replies

266 Views

Last post by Rjackson
Sun Mar 31, 2024 7:02 pm
F/S model T frame circa 1916. nice cond, near Reno Nev.

Last post by spedur « Sun Mar 31, 2024 6:41 pm

by spedur » Sun Mar 31, 2024 6:41 pm

nice straight, no welds. near Reno Nevada. asking $300. contact me for pictures.

0 Replies

287 Views

Last post by spedur
Sun Mar 31, 2024 6:41 pm
Collection of Model T Hub Caps and 1 Radiator Cap

Last post by Junkyard4 « Sun Mar 31, 2024 3:41 pm
Replies: 1
by Junkyard4 » Sun Mar 31, 2024 3:41 pm

First post

Collection of Model T Hub Caps and 1 Radiator Cap
Some aftermarket and some original
$25 for all plus shipping.
847-508-3634 call or text

IMG_5856.jpeg IMG_5857.jpeg IMG_5858.jpeg IMG_5859.jpeg IMG_5860.jpeg

Last post

IMG_5861.jpeg

1 Replies

188 Views

Last post by Junkyard4
Sun Mar 31, 2024 3:41 pm
15 inch Brass Steering Wheel (SOLD)

Last post by ThreePedalTapDancer « Sun Mar 31, 2024 1:35 pm

by ThreePedalTapDancer » Sun Mar 31, 2024 1:35 pm

Solid cast brass 15 inch steering wheel. Excellent condition, beautiful wood. No damage. 400 includes shipping.

IMG_0545.jpeg

0 Replies

266 Views

Last post by ThreePedalTapDancer
Sun Mar 31, 2024 1:35 pm
Model A Ford connecting rod cores

Last post by Gene_French « Sun Mar 31, 2024 10:07 am

by Gene_French » Sun Mar 31, 2024 10:07 am

Model A Ford connecting rod cores for rebuild ...have about 8 sets ... will require re-babbitting and wristpin bushings ...price $15.00 per set + $17.10 postage in lower 48 states ...Gene French 970-581-2808 or gfrench1953@hotmail.com

0 Replies

208 Views

Last post by Gene_French
Sun Mar 31, 2024 10:07 am
Price Reduced! Van Norman and Kwik Way boring bars.

Last post by Davebuildsbikes « Sun Mar 31, 2024 9:43 am
Replies: 13
by Temple2426 » Fri Feb 14, 2020 9:27 pm

First post

Van Norman 944 and 777. Both the Van Norman 944 and the 777 are great bars for boring Ford Model Ts.
The bars are complete with tool kit and in good working order. I will get the pictures of the 777 tonight.
The 944 bores from a 2.2 - 4.26
The 777 Bores from a 2.6 - 5.3
Kwik Way Model FN. Bores 2.65 - 5.33
I can deliver to Chickasha.
Matthew...

Last post

I realize this is 4 years old but if you still have the van norman 944s I'm very interested in finding a nice one.

13 Replies

5915 Views

Last post by Davebuildsbikes
Sun Mar 31, 2024 9:43 am
Model A connecting rod mold

Last post by Gene_French « Sun Mar 31, 2024 9:37 am

by Gene_French » Sun Mar 31, 2024 9:37 am

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $100 + $17.10 postage in lower 48 states ...actual postage outside this area ...Gene...

0 Replies

157 Views

Last post by Gene_French
Sun Mar 31, 2024 9:37 am
Re-babbitted connecting rods

Last post by Gene_French « Sat Mar 30, 2024 7:21 pm
Replies: 3
by Gene_French » Fri Mar 29, 2024 2:56 pm

First post

i have several single connecting rods ... all are re-babbitted and X oil grooves are cut and caps and rod webb drilled , all with laminated shim set inplace for final fitting ... sizes are 2 standard , 2 -.010 and 1 -.020 diameters ... single rods can save a tour ... i also have a set of -.010 diameter rods that are listed on another advertisement...

Last post

1 minus .020 rod sold ... thanks MTFCA

3 Replies

377 Views

Last post by Gene_French
Sat Mar 30, 2024 7:21 pm
FS 3" Diameter Raised Edge Adjustable crankshaft fan belt pulley

Last post by NealW « Sat Mar 30, 2024 6:48 pm
Replies: 2
by NealW » Sat Mar 30, 2024 6:16 pm

First post

I have a spare 3 diameter fan pulley with raised edges for sale. It is for 1909-1919 year cars. New they are $52, but it since it was previously installed, I'm selling it for $30, which includes shipping within the US.

My contact information is shown below if you'd like to buy it. No PM please.

Thanks,

Neal

Last post

Sold, pending payment.

2 Replies

251 Views

Last post by NealW
Sat Mar 30, 2024 6:48 pm
WTB: Cowl Light mounting brackets to wood cowl.

Last post by signsup « Sat Mar 30, 2024 6:32 pm
Replies: 5
by signsup » Sat Jan 27, 2024 1:45 pm

First post

Creating this WWI ambulance and mounting the cowl lights on a flat wooden dash/firewall/cowl and looking for two brackets to do so. Had used two on another wooden dash project vehicle that bolted to the wood and then the cowl light bolted to the bracket. Looking for two, maybe three if I decide on a single tail light with no license plate frame....

Last post

cowl 14.JPG George, yes, exactly like that. Unfortunately, I forgot that I had this thread out here and have changed the design of the firewall and cowl so that I no longer have a flat surface to work with. The cowl I have created is sloped towards the front and I now need to fabricate some sort of straight strip that will come flat out from my...

5 Replies

514 Views

Last post by signsup
Sat Mar 30, 2024 6:32 pm
FS TT hub caps

Last post by Karl Von Neumann « Sat Mar 30, 2024 5:23 pm
Replies: 2
by Karl Von Neumann » Sat Mar 30, 2024 12:33 pm

First post

5 mis matched tt hubcaps 12 each plus the ride threads look decent and usable no visible cracks

Last post

Greetings Karl. How much?

$12 each plus the ride

2 Replies

197 Views

Last post by Karl Von Neumann
Sat Mar 30, 2024 5:23 pm
re-babbitted connecting -.010" rod set

Last post by Gene_French « Sat Mar 30, 2024 9:47 am
Replies: 1
by Gene_French » Fri Mar 29, 2024 3:05 pm

First post

1 set of -.010 diameter connecting rods ( later light series rods) ... X oil grooved , cap and rod webb are drilled for dippers , laminated shim set inplace for final fitting ...price is $320 outright or $300 exchange + $17.10 postage in lower 48 states ... actual postage outside this area ...will add photos later when i can re-size for this site...

Last post

Rods are spoken for ...thanks MTFCA

1 Replies

219 Views

Last post by Gene_French
Sat Mar 30, 2024 9:47 am
FS Sediment bowl parts pile

Last post by Karl Von Neumann « Sat Mar 30, 2024 9:02 am
Replies: 4
by Karl Von Neumann » Sun Feb 18, 2024 2:11 pm

First post

For sale sediment bowl parts pile the 2 with the levers do turn could make 2 good ones easy selling as a pile $110 shipped lower 48

Last post

Move to top

4 Replies

722 Views

Last post by Karl Von Neumann
Sat Mar 30, 2024 9:02 am
WTB 1926-1927 Hood

Last post by EricMac « Fri Mar 29, 2024 9:28 pm
Replies: 1
by Caintuckrifle » Thu Mar 28, 2024 6:23 pm

First post

I'm looking to buy a 26-27 hood. Will be for a patina car but good condition is preferred.

Thank You!

Last post

Email sent.

1 Replies

241 Views

Last post by EricMac
Fri Mar 29, 2024 9:28 pm
Sold 1912 Torpedo tool box

Last post by Burlingtontguy « Fri Mar 29, 2024 8:24 pm
Replies: 2
by fordrelic » Thu Mar 28, 2024 8:31 am

First post

For Sale 1912 Torpedo tool box 28 x 11 x 11

$300 obo plus shipping

tool box.jpg tool box 2.jpg

Last post

Hello , Clay I will take the torpedo toolbox, Dennis E-Mail sent

2 Replies

511 Views

Last post by Burlingtontguy
Fri Mar 29, 2024 8:24 pm
Early Stuff for Sales

Last post by RichardW « Fri Mar 29, 2024 1:13 pm
Replies: 8
by mt15 » Thu Mar 28, 2024 4:37 pm

First post

Murphy (1).jpg SP Socket3.jpg SP Sockets (1).jpg Murphy3.jpg
Murphy's All original. Figure 8 base, singles $15, doubles $16 Oval bases single $12, Triples $14
All 36 $400
Spark Plug sockets Left one $50 very good condition. Right has small crack,shown, $35
Goodyear tire irons $25ea.

Have a lot more 11-15 small parts to be posted.
MT15

Last post

Please send address for payment to be sent to for murphy fasteners

Thanks

Richard

8 Replies

887 Views

Last post by RichardW
Fri Mar 29, 2024 1:13 pm
WTB: 1912 DB brass steering spider or wheel

Last post by Larry « Fri Mar 29, 2024 10:59 am
Replies: 10
by michaelb2296 » Mon Mar 18, 2024 1:15 pm

First post

Que Sera Sera

Thought i had but i did not!

Last post

Sold
Thank You.
Larry

10 Replies

663 Views

Last post by Larry
Fri Mar 29, 2024 10:59 am
For Sale: Large Black and Nickel Bulb Horn Assembly from 1911-1914

Last post by GGZ « Fri Mar 29, 2024 9:58 am
Replies: 1
by GGZ » Fri Mar 29, 2024 9:57 am

First post

This is a very nice, early black and nickel bulb horn assembly that is from 1911 through 1914'ish. It is complete with the horn, horn mounting bracket, tubes, tube bracket, reed, etc. The horn itself is about 4 1/2 wide by 9 tall and the tubing is about 50 long. The horn appears to be original including the paint and the nickel plating which is...

Last post

More photos....

1 Replies

242 Views

Last post by GGZ
Fri Mar 29, 2024 9:58 am
SOLD: 1926-27 wire wheels and hubs package deal

Last post by Ken Buhler « Fri Mar 29, 2024 9:33 am
Replies: 4
by KWTownsend » Sat Mar 09, 2024 7:53 pm

First post

Set of five, 1926-27 wire wheels complete with front and rear hubs, front dust caps, 5 brass hubcaps, and lug nuts. These are in very nice condition and use 4.40/4.50x21 tires (not included.) They are available for free pick-up at the Portland Swap Meet April 5-7 at the Portland Expo Center. $900.

26-27 wire wheels 2.jpg

26-27 wire wheels...

Last post

Keith,
By our conversation, I understood I was buying them and you were shipping them to Oroville.
Ken Buhler

4 Replies

906 Views

Last post by Ken Buhler
Fri Mar 29, 2024 9:33 am
New U-Joint T-2571-A

Last post by Model T Matt « Thu Mar 28, 2024 10:56 pm
Replies: 1
by Model T Matt » Wed Mar 27, 2024 9:13 pm

First post

Found second Joint asking $90.00 includes shipping call Matt 503-82four-268one

Last post

Held pending pick-up

1 Replies

393 Views

Last post by Model T Matt
Thu Mar 28, 2024 10:56 pm
WTB: Webbjay gauge for stewart warner vacuum tank

Last post by TRDxB2 « Thu Mar 28, 2024 7:39 pm
Replies: 1
by Linus Tremaine » Thu Mar 28, 2024 4:33 pm

First post

Im looking for an accessory webbjay brand gauge for monitoring stewart warner vacuum tank pressure.

Thanks

Last post

Don't have one but found some info

1 Replies

241 Views

Last post by TRDxB2
Thu Mar 28, 2024 7:39 pm
WTB Hub Caps

Last post by TRDxB2 « Thu Mar 28, 2024 7:25 pm
Replies: 10
by John_Aldrich » Wed Mar 27, 2024 2:48 pm

First post

Looking for wire wheel hub caps that say Made in Canada .

Last post

Perhaps Indiana Jones can help find them...

10 Replies

570 Views

Last post by TRDxB2
Thu Mar 28, 2024 7:25 pm
For sale: Hayes demountable wire wheels

Last post by JTT3 « Thu Mar 28, 2024 6:12 pm
Replies: 2
by KWTownsend » Sat Mar 09, 2024 1:03 pm

First post

Set of four, 30x3-1/2 Hayes demountable at the rim wire wheels complete with rims, roll-around tires, and original hubcaps. These are in very nice condition and will need a new spoke or two. They use a standard 30x3-1/2 rim and spare tire. $2000. They are available for free pick-up at the Portland Swap Meet April 5-7 at the Portland Expo Center....

Last post

Well heck Keith why didn’t you bring them on the plane to Chickasha

2 Replies

612 Views

Last post by JTT3
Thu Mar 28, 2024 6:12 pm
SOLD: another Stromberg LF - complete with dirt

Last post by Scott_Conger « Thu Mar 28, 2024 5:01 pm

by Scott_Conger » Thu Mar 28, 2024 5:01 pm

Complete LF
not as good as an OF, but not $400, either
'Way better than an NH

complete including the float and the often-missing larger version acorn nut which no one makes

potmetal venturi looks fine (I can detect no chips using a strong light and peering down the throat). Don't attempt to remove or you'll destroy it for certain.

throttle...

0 Replies

308 Views

Last post by Scott_Conger
Thu Mar 28, 2024 5:01 pm
FS Model T HET-NIX water pump / neck assembly accessory. $50.00 +ship

Last post by sharkeyranch « Thu Mar 28, 2024 4:55 pm
Replies: 2
by sharkeyranch » Tue Mar 19, 2024 8:50 pm

First post

SOLD FS Model T HET-NIX water pump / neck assembly accessory. $50.00 plus $10-$15 shipping, depending on destination (usps ground advantage). Aluminum body; steel grease cup; and brass impeller. Mounting holes are 3” apart center to center. Has been cleaned up and impeller/pulley turns freely. sharkeyranch@gmail.com
IMG_1445.jpeg IMG_1444.jpeg...

Last post

SOLD- received payment. Thank You!

2 Replies

445 Views

Last post by sharkeyranch
Thu Mar 28, 2024 4:55 pm
Front cover centering gage

Last post by NealW « Thu Mar 28, 2024 11:22 am
Replies: 8
by Gene_French » Fri Mar 24, 2023 11:08 am

First post

front timing cover centering gage … this is the tool used to center the timer recess to assure uniform timing from cylinder to cylinder … this is often overlooked when re-assembling an engine and a poorly centered timer will result in poor performance … this tool centers the actual timer recess to the camshaft ...NOT the much smaller design that...

Last post

This is a very useful tool. I just used the one that I bought from Gene about two weeks ago.

8 Replies

1473 Views

Last post by NealW
Thu Mar 28, 2024 11:22 am
Model T connecting rod mold

Last post by Gene_French « Thu Mar 28, 2024 10:07 am
Replies: 4
by Gene_French » Sun Apr 02, 2023 11:13 am

First post

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $100 plus $17.10 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Last post

to the top again ... thanks MTFCA

4 Replies

841 Views

Last post by Gene_French
Thu Mar 28, 2024 10:07 am
Re-babbitted ball cap ( 4th. main )

Last post by Gene_French « Thu Mar 28, 2024 10:06 am
Replies: 10
by Gene_French » Fri Mar 24, 2023 11:03 am

First post

Model T ball cap re-babbitted and bored to Standard or you specified diameter ...price is $50.00 + exchange + $17.10 priority flat rate mail in lower 48 states or actual postage outside this area or INTERNATIONAL ...Gene French 970-581-2808 or gfrench1953@hotmail.com
ballcap.jpg

Last post

to the top again ... thanks MTFCA

10 Replies

1532 Views

Last post by Gene_French
Thu Mar 28, 2024 10:06 am
Model A mainbearing mold

Last post by Gene_French « Thu Mar 28, 2024 10:05 am
Replies: 8
by Gene_French » Sun Jul 17, 2022 11:14 am

First post

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $150.00 + $16.60...

Last post

to the top again ... thanks MTFCA

8 Replies

1416 Views

Last post by Gene_French
Thu Mar 28, 2024 10:05 am
model T mainbearing mold

Last post by Gene_French « Thu Mar 28, 2024 10:04 am
Replies: 16
by Gene_French » Sun Jul 17, 2022 10:06 am

First post

my original design Model T mainbearing mold will pour the babbitt bearings in BOTH the block and caps of the Model T Ford engine ... the bearings will be poured at 1 1/8 diameter to allow for finish machining as needed ... instructions are included as well as my phone or email support ... price is $120 plus $16.50 priority mail postage in lower 48...

Last post

to the top again ... thanks MTFCA

16 Replies

2615 Views

Last post by Gene_French
Thu Mar 28, 2024 10:04 am
mainbearing linebore unit

Last post by Gene_French « Thu Mar 28, 2024 10:02 am
Replies: 15
by Gene_French » Sun Jul 17, 2022 9:45 am

First post

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $95...

Last post

to the top again ...thanks MTFCA

15 Replies

2625 Views

Last post by Gene_French
Thu Mar 28, 2024 10:02 am
Dome light switch WTB

Last post by Kenny Edmondson « Thu Mar 28, 2024 9:59 am
Replies: 6
by EricMac » Sat Mar 23, 2024 11:36 am

First post

Mayhap I am dreaming but I'm looking for the last little detail I need for my '26 Fordor restoration, the elusive dome light switch. If you happen to have one please let me know. It looks like the photo I copied from this forum. 71496.jpg

Thanks so much.

Last post

Joe, thanks for the information and Eric, thanks for the correct pictures.

6 Replies

380 Views

Last post by Kenny Edmondson
Thu Mar 28, 2024 9:59 am
Six rivet axle housings 1909-1910-1911

Last post by 1915ford « Thu Mar 28, 2024 9:34 am
Replies: 3
by 1915ford » Tue Mar 12, 2024 5:47 pm

First post

Excellent condition recently media blasted to reveal no rust pits anywhere. $2000.00 located in minnesota. Buy now and i will try to get them a ride to chickasha for you. Mark Cameron mcam@hughes.net

Last post

New price $1750.00

3 Replies

720 Views

Last post by 1915ford
Thu Mar 28, 2024 9:34 am
WANTED Veeder Odometer

Last post by W Austen « Thu Mar 28, 2024 9:31 am
Replies: 1
by W Austen » Sun Mar 24, 2024 1:35 am

1 Replies

301 Views

Last post by W Austen
Thu Mar 28, 2024 9:31 am
WTB: NOS SPINDLE ARMS

Last post by Stephen1915 « Wed Mar 27, 2024 11:42 pm
Replies: 8
by Stephen1915 » Sun Mar 24, 2024 3:16 pm

First post

Want to buy a pair of nos 1911-1919 STRAIGHT spindle arms.

Please call 314-287-1901

Email: stephensmail2001@gmail.com

Last post

Sorry Karl looking for new old stock. I edited my ad.

8 Replies

491 Views

Last post by Stephen1915
Wed Mar 27, 2024 11:42 pm
coil and light

Last post by Model T Matt « Wed Mar 27, 2024 10:06 pm
Replies: 2
by Model T Matt » Wed Mar 27, 2024 9:10 pm

First post

Old Heinze wood Coil and old dash light asking $45.00 includes shipping call Matt 503-82four-268one

Last post

Sold to Bryan Thanks

2 Replies

253 Views

Last post by Model T Matt
Wed Mar 27, 2024 10:06 pm
Steering wheel SOLD

Last post by Burlingtontguy « Wed Mar 27, 2024 9:26 pm
Replies: 1
by colonelpowers » Wed Mar 27, 2024 8:47 pm

First post

I bought this a while back with some other stuff and didn't see the front. I don't know what happened to the spider, but someone milled or filed a section out of the center. I has a nice wooden ring and someone could probably make use of it. It is $35 plus shipping if anyone wants it.

NOTE I probably have a buyer. Will mark it sold when deal is...

Last post

Hello, Joshua, I'll take tyhe steering wheel, Thanks, Dennis

1 Replies

265 Views

Last post by Burlingtontguy
Wed Mar 27, 2024 9:26 pm
For Sale: TT Ruckstell (Sold)

Last post by Philip Lawrence « Wed Mar 27, 2024 8:41 pm

by Philip Lawrence » Wed Mar 27, 2024 8:41 pm

TT Ruckstell rear axle. Missing driveshaft and radius rods. Was removed from a home made tractor. It looks to be in good shape. Price $500.00 I'm open to offers. I can deliver it to the Bakersfield swap meet in May.

0 Replies

273 Views

Last post by Philip Lawrence
Wed Mar 27, 2024 8:41 pm
New U-Joint T-2571-A

Last post by Model T Matt « Wed Mar 27, 2024 8:09 pm
Replies: 2
by Model T Matt » Wed Mar 27, 2024 7:50 pm

First post

For Sale New U-Joint asking $90.00 includes shipping call Matt 503-82four-268one

Last post

Joint Sold

2 Replies

196 Views

Last post by Model T Matt
Wed Mar 27, 2024 8:09 pm
Delivery Car Fender Irons

Last post by Tbird « Wed Mar 27, 2024 6:51 pm
Replies: 13
by Tbird » Tue Nov 16, 2021 9:26 am

First post

I've been researching and planning and making the necessary pieces for my delivery car. One item was the fender irons. I have drawn these unique fender irons up and 3D printed them to exact dimensions. I have now finally secured a foundry that will cast these for me. I was only going to have one set cast, but a forum member had contacted me and...

Last post

Mike, any thought on how much for the finished product, I think something like this would work well on my home-made pickup. George Hand

George, I had these casted back in 2022 for my Delivery Car project and only made a small run of them for those who requested them. At the time they were $125/pair. I don’t foresee making another run because...

13 Replies

2142 Views

Last post by Tbird
Wed Mar 27, 2024 6:51 pm
Wanted Holly H carb and...

Last post by George Hand « Wed Mar 27, 2024 6:08 pm
Replies: 3
by JSteele » Tue Mar 26, 2024 4:12 pm

First post

I'm looking for a Holly H1 3 screw bowl or possibly a whole carb in decent useable shape.
I'm also looking for Brass headlight rims for a 1912 T, E & J 666.

Last post

Replacement brass bowls for early Holly carbs would be a good thing to have reproduced. George

3 Replies

324 Views

Last post by George Hand
Wed Mar 27, 2024 6:08 pm
FS: Original Oil Pan Support Bracket (Sold)

Last post by George Hand « Wed Mar 27, 2024 5:55 pm
Replies: 6
by WaltM » Fri Jan 05, 2024 4:36 pm

First post

For Sale: Original oil pan support bracket. A must if running an auxiliary transmission. Threads are in good shape. Price $130 plus shipping. Call or Text (248) 894-75fiveone.

Last post

Belly Band.

6 Replies

884 Views

Last post by George Hand
Wed Mar 27, 2024 5:55 pm
WTB Stewart Speedo Cable Housing End

Last post by Tbird « Wed Mar 27, 2024 1:58 pm

by Tbird » Wed Mar 27, 2024 1:58 pm

Looking for this cable housing end.

1752l.jpg

Shoot me an email if you have one. mikebird@lifeattheridge.net

Thanks!

0 Replies

182 Views

Last post by Tbird
Wed Mar 27, 2024 1:58 pm
Horn Kit

Last post by Rick_Rice « Wed Mar 27, 2024 12:40 pm
Replies: 7
by Model T Matt » Tue Mar 26, 2024 8:10 pm

First post

2 ft Horn kit new in box part T-13802-HS2 asking $80.00 includes shipping call Matt 503-82four-268one

Last post

Good information, thanks Mark! I'm really glad some items are starting to surface and be available again! A guy can order a kit today from Jim (937)692-6100.

7 Replies

471 Views

Last post by Rick_Rice
Wed Mar 27, 2024 12:40 pm
steering column,hood former

Last post by T-Brass « Wed Mar 27, 2024 8:50 am

by T-Brass » Wed Mar 27, 2024 8:50 am

wanted to buy1912 steering column and original hood former

0 Replies

302 Views

Last post by T-Brass
Wed Mar 27, 2024 8:50 am
26-27 shift lock

Last post by Model T Matt « Tue Mar 26, 2024 10:38 pm
Replies: 1
by Model T Matt » Tue Mar 26, 2024 8:07 pm

First post

New Shifter for 1926-1927 Ruckstell asking $420.00 shipped to your location call Matt 503-82four-268one

Last post

Sold thanks Joe

1 Replies

332 Views

Last post by Model T Matt
Tue Mar 26, 2024 10:38 pm
Wakesha Head

Last post by Model T Matt « Tue Mar 26, 2024 10:35 pm
Replies: 3
by Model T Matt » Tue Mar 26, 2024 8:47 pm

First post

Fresh from hiding- appears to have came off running veh. has a line casting or crack ? no sign of leak- shown in picture asking $400.00 plus shipping call Matt 503-82four-268one

Last post

Sold pending payment

3 Replies

477 Views

Last post by Model T Matt
Tue Mar 26, 2024 10:35 pm
WTB 1916 HEADLAMPS, SIDE & TAIL LAMPS

Last post by Larry « Tue Mar 26, 2024 9:35 pm
Replies: 3
by Stephen1915 » Fri Mar 22, 2024 5:12 pm

First post

Looking for a excellent set of 1915 to 1917 headlamps for my 1916 Coupelet. The focus screw would be in the 12 o’clock position. Also looking for side, and tail lamps correct for 1916. Patent date should help narrow down the correctness. Must be in excellent condition, and complete. No rust pitted parts! Thanks!

314-287-1901

Last post

Stephen
I Have an exceptional original set. (side lights, tail light, and headlights) They are correct with original elbow sockets for the headlights. I can get you some pictures tomorrow if you are interested.

3 Replies

259 Views

Last post by Larry
Tue Mar 26, 2024 9:35 pm

New Topic

19843 topics

Page 3 of 199
- Jump to page:
Previous
1
2
3
4
5
…
199
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum