Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

10639 topics

Page 1 of 107
- Jump to page:
1
2
3
4
5
…
107
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

85924 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Avoid scammers. Don't post personal info!

Last post by Bills Auto Works « Wed Feb 04, 2026 5:53 am
Replies: 16
by AdminJeff » Wed Sep 18, 2024 8:20 pm

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

..... Joe P. Biden.

EXACTLY!

16 Replies

16734 Views

Last post by Bills Auto Works
Wed Feb 04, 2026 5:53 am
For sale original cast prestolite tank brackets

Last post by Original14T « Wed Feb 18, 2026 4:05 am
Replies: 1
by Original14T » Sat Feb 14, 2026 5:08 pm

First post

A pair of original cast brackets for mounting a prestolite tank on the running board. Very good condition US$120 contact me through the forum, thanks, Bill

Last post

Sold , thanks

1 Replies

208 Views

Last post by Original14T
Wed Feb 18, 2026 4:05 am
New Stevens Front Axle Tooling

Last post by Dan Hatch « Wed Feb 18, 2026 3:56 am
Replies: 4
by Dan Hatch » Mon Feb 16, 2026 7:06 pm

First post

I have been ask by a few people about another run of Upper Tapered Reamers and the Lower Reamer/Tap.
So I am posting here to see if there is enough interest in me making another batch.
I don’t know what price would be, but I am sure there would be a price increase. What hasn’t had one?
Only will be sold as a set unless I get more than 12...

Last post

Bill please send me an email by the forum. Thanks Dan
By the way, up to 5, need 7 more.

4 Replies

232 Views

Last post by Dan Hatch
Wed Feb 18, 2026 3:56 am
FS Brass Era Tail Light Bracket 1903-12 $35.00

Last post by Robert Kiefaber « Wed Feb 18, 2026 12:34 am
Replies: 1
by Tparts » Tue Feb 17, 2026 7:56 pm

First post

For Sale is a Brass Era Cast Iron Tail Light Bracket $35.00 plus Shipping Lang’s 1-800-872-7871

Last post

I would like to purchase your bracket. Will call you.

1 Replies

75 Views

Last post by Robert Kiefaber
Wed Feb 18, 2026 12:34 am
Boyce Running Board Cans

Last post by Model T Matt « Tue Feb 17, 2026 9:28 pm

by Model T Matt » Tue Feb 17, 2026 9:28 pm

Set of Gas,Oil,Water Cans - No Holder - Red Can needs paint touch up after falling off shelf onto my forehead asking $300.00 plus shipping give me a call 50 three-8 two 4-268 one

0 Replies

83 Views

Last post by Model T Matt
Tue Feb 17, 2026 9:28 pm
For Sale: PRICE REDUCED Original Early Magneto Literature Simms, Berling, Kingston

Last post by GGZ « Tue Feb 17, 2026 8:50 pm
Replies: 9
by GGZ » Sat Aug 23, 2025 5:15 pm

First post

Price Reduced to 125.00 includes shipping in the USA. Here is a really nice group of early magneto literature. Includes: 6 by 9 Berling two manuals together for Type S and Type E-41 four cylinder, 28 pages, Kingston 6 pages, fold out, 3 x 7 , European, 23 pages, 6 x 9 (I can't read it!), Two Simms 6 x 9 12 and 16 pages and two larger blueprints...

Last post

How about 100.00

9 Replies

1269 Views

Last post by GGZ
Tue Feb 17, 2026 8:50 pm
FS Tobrin Cylinder Head Removing Handle $50.00

Last post by Tparts « Tue Feb 17, 2026 8:23 pm

by Tparts » Tue Feb 17, 2026 8:23 pm

For Sale is a Model A Cylinder Head Removing Tool. $50.00 plus shipping Lang’s 1-800-872-7871

0 Replies

108 Views

Last post by Tparts
Tue Feb 17, 2026 8:23 pm
FS KRW Model A Crankshaft Tool $225.00

Last post by Tparts « Tue Feb 17, 2026 8:15 pm

by Tparts » Tue Feb 17, 2026 8:15 pm

For Sale is an original KR Wilson crank shaft Tool (Flywheel Housing Indicator) It’s in excellent condition. $225.00 plus shipping Lang’s 1-800-872-7871

0 Replies

83 Views

Last post by Tparts
Tue Feb 17, 2026 8:15 pm
FS Accessory Anti Theft Wheel Clamp $125.00

Last post by Tparts « Tue Feb 17, 2026 7:45 pm

by Tparts » Tue Feb 17, 2026 7:45 pm

For Sale is a “Car Cuf” anti theft Wheel Clamp most likely used on 30 x 3 or 30 x 3-1/2 wheels. Looks to be NOS $125.00 plus shipping Lang’s 1-800-872-7871

0 Replies

62 Views

Last post by Tparts
Tue Feb 17, 2026 7:45 pm
FS 1926-27 Kingston Regenerator Carb $275.00

Last post by Tparts « Tue Feb 17, 2026 7:37 pm

by Tparts » Tue Feb 17, 2026 7:37 pm

For Sale is a rare 1926 - 1927 Kingston Regenerator Carburetor. Most likely needs to be rebuilt. $275.00 plus shipping Lang’s 1-800-872-7871

0 Replies

74 Views

Last post by Tparts
Tue Feb 17, 2026 7:37 pm
FS 1909-11 Touring Door Latches $250.00

Last post by Tparts « Tue Feb 17, 2026 7:30 pm

by Tparts » Tue Feb 17, 2026 7:30 pm

For Sale are a pair of 1909-11 Touring rear door latches. They have been glass beaded and are in good condition. $250.00 plus shipping Lang’s 1-800-872-7871

0 Replies

65 Views

Last post by Tparts
Tue Feb 17, 2026 7:30 pm
F S transmission band linings

Last post by RajoRacer « Tue Feb 17, 2026 6:00 pm
Replies: 3
by billd » Tue Feb 17, 2026 5:12 pm

First post

For sale are two sets of Scandinavian transmission band linings with rivets. One set is for 09-25 the other set is for 26-27. $80 each plus shipping to lower 48. Best way to reach me is through text message or the forum. My number is 419-217-8884.

Last post

I'll take the narrow ones, bill.

3 Replies

119 Views

Last post by RajoRacer
Tue Feb 17, 2026 6:00 pm
Stevens Front Axle Inserts FS

Last post by Dan Hatch « Tue Feb 17, 2026 5:34 pm
Replies: 12
by Dan Hatch » Sat Jan 31, 2026 4:48 pm

First post

Just finished up a new batch of Stevens Front Axle Repair inserts. Be out for a while. Sorry for taking so long, but life gets on the way. Have both Upper and Lower in stock now.
Upper Tapered inserts $6.50 each
Lower Threaded inserts $8.00 each
All are + shipping.
Email me by forum. Thanks Dan
IMG_0598.jpeg
IMG_2391.jpeg

Last post

Back to the top

12 Replies

1169 Views

Last post by Dan Hatch
Tue Feb 17, 2026 5:34 pm
NORS main seals FS

Last post by Dan Hatch « Tue Feb 17, 2026 5:34 pm
Replies: 17
by Dan Hatch » Tue Dec 13, 2022 2:58 pm

First post

Here are some Old School style rope type main seals that work good on T engines. One will do a T engine. These are about 6.5” long and 1/2” square. Fits the front seal just right. Fit it in timing cover, trim it and use the rest in pan. I have a good stock of these, but when gone there will be no more. If you want any better get them while you...

Last post

Back to the top

17 Replies

3129 Views

Last post by Dan Hatch
Tue Feb 17, 2026 5:34 pm
13 Roadster Body FS New Pictures

Last post by Dan Hatch « Tue Feb 17, 2026 5:34 pm
Replies: 8
by Dan Hatch » Sun Feb 01, 2026 3:39 pm

First post

I am going to part out my 1913 Roadster project. The body is going to be first to go. Very nice body and top irons/bows. Came from an auction in Ind years ago. $4500 pickup here or at Luray. Email me by forum. Dan
IMG_5236.jpeg
IMG_5253.jpeg
IMG_5242.jpeg
IMG_5244.jpeg

Last post

Back to the top

8 Replies

1647 Views

Last post by Dan Hatch
Tue Feb 17, 2026 5:34 pm
Hayes rim

Last post by BillM « Tue Feb 17, 2026 4:47 pm
Replies: 5
by Melba Nolan » Sat Jan 03, 2026 5:20 pm

First post

20250324_141159.jpg 20250322_184948.jpg 20250322_184855.jpg

For sale: Hayes rim $100 plus shipping

Last post

I will take it Melba. I'll send a check out tomorrow. Shoot me an email with shipping costs please.

5 Replies

765 Views

Last post by BillM
Tue Feb 17, 2026 4:47 pm
WTB: Holley NH Body

Last post by Karl Von Neumann « Tue Feb 17, 2026 3:57 pm
Replies: 4
by Jacob Mangold » Tue Feb 17, 2026 12:23 pm

First post

The other day I made an unfortunate discovery with my NH. There’s the link to my original post. Anyways, the inlet where the needle and housing goes lacks threads making the body I do have a paperweight. If any of you guys have an NH body you’re willing to part with, I’d be more than happy to pay for it.

Thank you, Jacob Mangold

Last post

Search the fourm I'm pretty sure I posted one awhile back if not I probably have a bare body. Why is ebay always the 1st response this fourm is the best place to find parts support you local club parts guys

4 Replies

140 Views

Last post by Karl Von Neumann
Tue Feb 17, 2026 3:57 pm
FS RUCKSTELL HOUSING

Last post by Mark Chaffin « Tue Feb 17, 2026 12:50 pm
Replies: 5
by Mark Chaffin » Sun Feb 15, 2026 6:45 pm

First post

I have a couple of very good Ruckstell housings available. Small drum and large drum. Primed and ready to assemble. $300 each. Pick up preferred or i can deliver to Bakersfield. Mark Chaffin (951)805-0928

Last post

Got it. I'll let you know.

5 Replies

450 Views

Last post by Mark Chaffin
Tue Feb 17, 2026 12:50 pm
FS: Early Ruckstell shift lock assemble

Last post by Mark Gregush « Tue Feb 17, 2026 11:41 am
Replies: 10
by billd » Wed Jan 21, 2026 7:37 pm

First post

I have for sale an early Hall Scott Ruckstell shift lock assembly in very good condition. $250.00 plus shipping to the lower 48. Best way to reach me is through text message, my number is 419-217-8884.

Last post

yep Brent! You spend years looking for something, finely find one, buy it, then 20 more pop up at a lower price and better condition. :)

10 Replies

1232 Views

Last post by Mark Gregush
Tue Feb 17, 2026 11:41 am
Scammers contact list

Last post by love2T's « Tue Feb 17, 2026 9:19 am
Replies: 5
by South Park Zephyr » Sun Feb 15, 2026 4:35 pm

First post

I like Scott Congers suggestion, so I’ll start

1. Richard Armstrong is a known scammer alias
2. 270-632-0652 was a number pretending to be Melba Nolan

Last post

It is not libel if it is true, and warnings against scam phone numbers are posted all over the internet...it most certainly is not libel. Thanks to the Defense Department divulging my every aspect of my being, 11 years ago, I get scam #'s more than periodically, and most of the time I can find that number on the internet being listed as one scam...

5 Replies

513 Views

Last post by love2T's
Tue Feb 17, 2026 9:19 am
FOR SALE 3- 26-7 coil boxes,engine blocks,rear axle housings

Last post by Burlingtontguy « Mon Feb 16, 2026 11:00 pm

by Burlingtontguy » Mon Feb 16, 2026 11:00 pm

I have 3 - nice 26-7 coilboxes with covers, $115 plus shipping, 26-7 engine blocks $350 plus shipping, 26-7 rear axle housings
$100 plus shipping, 2-3 High radiators $150 each plus shipping. 26-7 frames excellant condition $350 each. All items can be picked up in Ct 06013. Email needs with contact# I will call you back to discuss all items and...

0 Replies

253 Views

Last post by Burlingtontguy
Mon Feb 16, 2026 11:00 pm
FOR SALE 1914 Ambulance body project needs completion

Last post by Burlingtontguy « Mon Feb 16, 2026 10:46 pm

by Burlingtontguy » Mon Feb 16, 2026 10:46 pm

I have a great start on a 1914 WW1 Ambulance Body and Chassis, 85 % finished but all materials are there to finish this neat
piece of U S History. Located in Ct 06013 25 miles from Hartford. I can Deliver within a 100 mile radius for fuel. Asking $4,500 Email for pictures and send Contact# to discuss the project. You will not be disappointed with...

0 Replies

213 Views

Last post by Burlingtontguy
Mon Feb 16, 2026 10:46 pm
WTB- Auxiliary Model TT Brakes

Last post by 1923Touring « Mon Feb 16, 2026 9:55 pm
Replies: 3
by 1923Touring » Sun Feb 15, 2026 3:24 pm

First post

Does anybody have a set of auxiliary Model TT brakes for sale, or know of a set that may be for sale? I know some were made by Bennett and Rocky Mountain along with some others. Any help would be appreciated.

Thank you,
Joshua

Last post

Hi - I have several sets of TT auxiliary brakes that I can sell as long as you are not in a hurry.
Email me NWPorter@Mindspring.com and I will let you know what I have.
Thanks. Neil

Email sent.

3 Replies

216 Views

Last post by 1923Touring
Mon Feb 16, 2026 9:55 pm
I must be crazy!

Last post by RGould1910 « Mon Feb 16, 2026 7:57 pm
Replies: 2
by RGould1910 » Sun Feb 15, 2026 3:30 pm

First post

Will pay $400 for an NOS 26-27
Watts clutch.
Someone take advantage of a fool.

Last post

Located a Watts clutch. Thanks to those who responded!

2 Replies

553 Views

Last post by RGould1910
Mon Feb 16, 2026 7:57 pm
FS DIFFERENTIAL WITH RING GEAR (SOLD)

Last post by Mark Chaffin « Mon Feb 16, 2026 6:40 pm
Replies: 4
by Mark Chaffin » Mon Feb 16, 2026 3:55 pm

First post

One more late style differential case complete and in excellent condition. Also includes an original standard ring gear in very good condition. Price is $200 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20260216_120853.jpg

20260216_120918.jpg

Last post

Going to Michael.

4 Replies

208 Views

Last post by Mark Chaffin
Mon Feb 16, 2026 6:40 pm
FS Original Brass Bermuda Carriage Bell (SOLD)

Last post by ThreePedalTapDancer « Mon Feb 16, 2026 6:38 pm
Replies: 1
by ThreePedalTapDancer » Mon Feb 16, 2026 6:38 pm

First post

Original T era brass Bermuda foot bell. Made by the Mogul Carriage Bell Co. The bell is in good condition, works as designed. It puts out a loud “Ding Dong” when the plunger is depressed by your foot. Mounts under your floorboard with the plunger sticking up. Neat original accessory, nice polish with some minor imperfections and patina from a...

Last post

IMG_5343.jpeg

1 Replies

153 Views

Last post by ThreePedalTapDancer
Mon Feb 16, 2026 6:38 pm
Brass anti tarnish covers! Update 2-2-26

Last post by Karl Von Neumann « Mon Feb 16, 2026 3:07 pm
Replies: 5
by Karl Von Neumann » Thu Jan 22, 2026 9:56 am

First post

Brass anti tarnish covers are now available for order! Full sets not yet available but are comming soon. Earlier model headlamps and cowl lamps are in the works. I am a one man band doing this so please be patient with me and my sewing machine we can only work so fast. All covers are hand made to order from anti tarnish cloth and water proof...

Last post

Move to top

5 Replies

1040 Views

Last post by Karl Von Neumann
Mon Feb 16, 2026 3:07 pm
FS RAYDAY ALUMINUM PISTON SET

Last post by Mark Chaffin « Mon Feb 16, 2026 2:10 pm

by Mark Chaffin » Mon Feb 16, 2026 2:10 pm

One set of RayDay aluminum pistons .100 oversize. No pins. Standard pins are available from the dealers. Price is $50.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20260216_094600.jpg

20260216_094657.jpg

20260216_094625.jpg

0 Replies

214 Views

Last post by Mark Chaffin
Mon Feb 16, 2026 2:10 pm
FS ALUMINUM PISTON AND RING SET

Last post by Mark Chaffin « Mon Feb 16, 2026 2:07 pm

by Mark Chaffin » Mon Feb 16, 2026 2:07 pm

One set of standard aluminum pistons .030 oversize with pins and rings. Price is $150.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20260216_093722.jpg

20260216_093755.jpg

0 Replies

204 Views

Last post by Mark Chaffin
Mon Feb 16, 2026 2:07 pm
FS 1926 Ford Manual – Original - New Price

Last post by MAG « Mon Feb 16, 2026 2:04 pm
Replies: 2
by MAG » Thu Feb 12, 2026 10:14 am

First post

Here is a good condition original 1926 copywrite Ford Manual that came with the car when new. It does have a couple of pages coming loose from the center staples. Otherwise in good condition. NOW $25 and $10 shipping. Email me at markpaulagember AT aol dot com

Last post

Sold to Jesse pending payment. Jesse I sent you an email reply.

2 Replies

305 Views

Last post by MAG
Mon Feb 16, 2026 2:04 pm
FS 1909 buffalo carburetor

Last post by KimDobbins « Mon Feb 16, 2026 10:20 am
Replies: 2
by KimDobbins » Sun Feb 15, 2026 10:51 pm

First post

Nice 1909 buffalo carb, used on early 1909 T’s. Very rare carbs. $2500.00. Kdmks AT att.net.

Last post

Sold to Larry.

2 Replies

337 Views

Last post by KimDobbins
Mon Feb 16, 2026 10:20 am
Minnesota Swapmeet April 18 2026

Last post by BobP « Mon Feb 16, 2026 7:52 am
Replies: 1
by BobP » Sun Feb 08, 2026 5:24 pm

First post

We are having our 9th annual Model T/ Model A/ prewar swap meet/ car show/ get together on April 18th 700 A. M. at our farm. Free setup and admission. Outside spaces only. Bring your Model T's, Model A's V8's all makes and models pre 1945 or just come to visit. Free primitive camping the night before. We welcome early setup. Food wagon and...

Last post

btttttttttttt

1 Replies

337 Views

Last post by BobP
Mon Feb 16, 2026 7:52 am
R. C. Wells Coil Box with lid and coils

Last post by Melba Nolan « Mon Feb 16, 2026 12:10 am
Replies: 1
by Melba Nolan » Fri Jan 02, 2026 9:21 am

First post

20250821_161128.jpg 20250821_161100.jpg 20250821_161150.jpg

For sale: RC Wells coil box with coils $750 plus shipping

Last post

move to top

1 Replies

506 Views

Last post by Melba Nolan
Mon Feb 16, 2026 12:10 am
Kingston Brass carb top REDUCED PRICE

Last post by Melba Nolan « Mon Feb 16, 2026 12:08 am
Replies: 3
by Melba Nolan » Sat Nov 22, 2025 10:13 pm

First post

For sale: Kingston brass carb top $200 plus postage
20251121_212822.jpg 20251121_212904.jpg 20251121_212840.jpg

New price is $175 plus postage

Last post

move to top

3 Replies

606 Views

Last post by Melba Nolan
Mon Feb 16, 2026 12:08 am
tank brackets

Last post by Melba Nolan « Mon Feb 16, 2026 12:06 am
Replies: 1
by Melba Nolan » Sun Jan 04, 2026 9:47 pm

First post

20220726_183551.jpg 20220726_183724.jpg

For sale: gas tank brackets $50 plus shipping

Last post

move to top

1 Replies

400 Views

Last post by Melba Nolan
Mon Feb 16, 2026 12:06 am
For Sale: Large Fulton Co. Four Chime No. OO Aermore Exhaust Whistle

Last post by clee2 « Sun Feb 15, 2026 8:24 pm
Replies: 4
by GGZ » Sat Jan 17, 2026 4:02 pm

First post

The Fulton Co. Four Chime Aermore Exhaust Whistle. The tallest chime approximately measuring 21 1/2 tall and a 1 1/4 inlet ID. The top is stamped The Fulton Co. No. 00 Aermore Exhaust Horn . It's dirty but is in very good, original condition. Nice and straight. No damage. Price is 210.00 including shipping in the USA via FedEx Ground. I do not...

Last post

Which whistle has the deepest train sound?

4 Replies

749 Views

Last post by clee2
Sun Feb 15, 2026 8:24 pm
Duncan Oklahoma swap meet

Last post by dobro1956 « Sun Feb 15, 2026 7:42 pm
Replies: 2
by Modeltmike » Tue Feb 10, 2026 8:48 pm

First post

There will be T parts and other pre war stuff at the Duncan Oklahoma swap meet. They added a pre war section last year. Us in the Midwest need to support this to keep a pre war swap meet in the area. I will have a booth and plan on bringing wheels, horns, tools, plates and many other items. Photos coming. Attached is a flyer. I went last year if...

Last post

We will be there again this year. I thought last year was great considering it was the first year moving the Chickasha meet to Duncan. I sold very well and bought a lot of things. Hope to see everyone there this year. We are already loading the trailer ......

2 Replies

368 Views

Last post by dobro1956
Sun Feb 15, 2026 7:42 pm
For Sale: Great Large Gabriel Three-Pipe Outboard Exhaust Whistle

Last post by Maineiac « Sun Feb 15, 2026 6:51 pm
Replies: 5
by GGZ » Sat Jan 17, 2026 4:14 pm

First post

Another item from the garage with neat, early parts. A Gabriel large three-pipe, outboard exhaust whistle. This is used for mounting above the running board. This is about 40 total length, 7 1/2 tall and the tubes are 1 3/4 in diameter. It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp. This...

Last post

How about 1,100.00 for the three?

That would be quite the cacophony on one vehicle!

5 Replies

826 Views

Last post by Maineiac
Sun Feb 15, 2026 6:51 pm
FS warford cases empty

Last post by DCordner « Sun Feb 15, 2026 6:17 pm
Replies: 1
by Karl Von Neumann » Sun Feb 15, 2026 11:50 am

First post

I have almost a dozen empty or mostly empty warford cases &100 each + s&h aluminum and iron avaliable i have a few tops and limited gears avalible also

Last post

Karl,
I sent pm re aluminum top.

Thanks
Dave Cordner
14 Touring, 22 Depot hack, 26 Roadster pickup, + projects

1 Replies

182 Views

Last post by DCordner
Sun Feb 15, 2026 6:17 pm
FS tuarc wheel front

Last post by Karl Von Neumann « Sun Feb 15, 2026 2:47 pm
Replies: 3
by Karl Von Neumann » Mon Aug 05, 2024 7:09 pm

First post

One single tuarc front wheel good shape one of the outer hoop studs is busted off and missing the clamp $150 plus the ride

Last post

Move to top

3 Replies

5143 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 2:47 pm
Texas T Leakless waterpump

Last post by EricS1917 « Sun Feb 15, 2026 12:45 pm
Replies: 1
by EricS1917 » Thu Feb 05, 2026 3:36 pm

First post

What I have for sale is a brand new Texas T Leakless water pump. I do not have the hose. $250 plus shipping of $12.00 in the lower 48 states
Eric Smith.
815 535 1367
1958els@gmail.com
PENDING

Last post

Sold. Thanks

1 Replies

548 Views

Last post by EricS1917
Sun Feb 15, 2026 12:45 pm
FS front wire wheel hubs

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:32 pm
Replies: 4
by Karl Von Neumann » Wed Dec 10, 2025 5:51 pm

First post

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Last post

Move to top

4 Replies

1059 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:32 pm
FS late style front motor spring mount

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:32 pm
Replies: 3
by Karl Von Neumann » Mon Dec 15, 2025 1:20 pm

First post

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Last post

Move to top

3 Replies

671 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:32 pm
FS early front mount

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:32 pm
Replies: 3
by Karl Von Neumann » Mon Dec 15, 2025 1:21 pm

First post

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Last post

Move to top

3 Replies

685 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:32 pm
FS muffler ends

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:31 pm

by Karl Von Neumann » Sun Feb 15, 2026 12:31 pm

Random muffler ends 15$ each plus the ride

0 Replies

105 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:31 pm
Bulk black era coil boxes

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:26 pm
Replies: 5
by Karl Von Neumann » Wed Dec 10, 2025 1:50 pm

First post

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Last post

Move to top will be tossing a bunch of these come spring speak up now

5 Replies

1008 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:26 pm
FS fan hubs

Last post by Karl Von Neumann « Sun Feb 15, 2026 12:25 pm

by Karl Von Neumann » Sun Feb 15, 2026 12:25 pm

First off no brass hubs that being said thinning out 4 milk crates of fan hubs. Aluminum and steel hubs. fans are mostly bad what your buying is the hubs. 10each plus the ride buy a bunch I'll cut you a huge deal. alot of these are getting tossed next scrap load

0 Replies

96 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 12:25 pm
Stevens Axle Tool SOLD

Last post by Scott_Conger « Sun Feb 15, 2026 11:54 am
Replies: 4
by Melba Nolan » Sat Dec 20, 2025 12:11 pm

First post

For sale: Stevens Axle Tool $1500 plus postage
includes frame, 1 reamer/tap, 1 tappered reamer, one set of uppers inserts and one set of lower inserts plus one set mixed inserts
20250901_135117.jpg

Last post

With so many people having either BEEN scammed or have been the target of an attempt, I'm surprised that no one has yet started a post listing scammers' phone numbers or email addresses

4 Replies

1095 Views

Last post by Scott_Conger
Sun Feb 15, 2026 11:54 am
FS ruckstell housing

Last post by Karl Von Neumann « Sun Feb 15, 2026 11:46 am

by Karl Von Neumann » Sun Feb 15, 2026 11:46 am

Here one for you doers out there ruckstell housing had been made into a tractor rear end need new axle tube housing is nice 300$ plus the ride

0 Replies

129 Views

Last post by Karl Von Neumann
Sun Feb 15, 2026 11:46 am
For Sale: Aermore No. 0 whistle with Fulton Cutout

Last post by GGZ « Sun Feb 15, 2026 11:39 am
Replies: 5
by GGZ » Wed Jan 07, 2026 2:37 pm

First post

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

Last post

How about 1,100.00 for the three?

5 Replies

929 Views

Last post by GGZ
Sun Feb 15, 2026 11:39 am
The deal of a century

Last post by jaybee47 « Sun Feb 15, 2026 9:53 am
Replies: 6
by jaybee47 » Fri Feb 13, 2026 1:19 pm

First post

:shock: :shock: :roll: :roll: :lol: :lol:

Last post

I'm going to look in my junk box...I could be a rich man :lol: :lol: :roll: :roll:

6 Replies

896 Views

Last post by jaybee47
Sun Feb 15, 2026 9:53 am
FS Rubes Horn

Last post by fordrelic « Sun Feb 15, 2026 8:22 am
Replies: 1
by fordrelic » Thu Feb 12, 2026 9:37 am

First post

Rubes Horn For Sale as pictured,

has reed and honks.

$225 plus shipping.

rubes horn.jpg

Last post

to the top

1 Replies

223 Views

Last post by fordrelic
Sun Feb 15, 2026 8:22 am
Weston Amp and Volt Gauge For Electric Car.

Last post by BobP « Sun Feb 15, 2026 8:03 am
Replies: 2
by BobP » Thu Feb 12, 2026 2:18 pm

First post

Very rare Weston Amp and volt gauge for an early electric car. Bakers used them and others. It could have other uses also. It is in very good all original untouched condition. It is untested, $975. I know it should be listed in the horseless carriage list but I cannot do it. Five07 458677eight. NO TEXTING.

Last post

Hi, no shunt, Bob.

2 Replies

272 Views

Last post by BobP
Sun Feb 15, 2026 8:03 am
Sorry Internet is down I’ll be back

Last post by RajoRacer « Sat Feb 14, 2026 11:37 pm
Replies: 3
by RajoRacer » Sat Feb 14, 2026 1:29 pm

First post

Sorry fellas internet has taken a dump!

Last post

My wife helped me with her phone - I'm technically challenged & then some ! Just came back on tonight - been down for 3 days !

3 Replies

310 Views

Last post by RajoRacer
Sat Feb 14, 2026 11:37 pm
One Inch wide black leather scraps or pieces

Last post by DaveB « Sat Feb 14, 2026 9:39 pm
Replies: 10
by DaveB » Mon Feb 09, 2026 12:09 pm

First post

I need a couple of pieces of 1 wide black leather used is fine if its not to dry and hard. Does some one have a old broken front top strap for a 1911-12? Need a 8 and a 16 17 piece if longer that's great . Thanking you in advance for checking and any leads. Dave

Last post

Thanks for all the reply's & suggestions .I was able to get what I needed from family that's raised Percheron's and involved with horse pulling. I wanted old not new . Thanks Erik Did not know Tandy still had a business in the Twin Cities.

10 Replies

613 Views

Last post by DaveB
Sat Feb 14, 2026 9:39 pm
John Reagan FunProjects 6V-Neg. Gnd Voltage Regulator

Last post by henryford2 « Sat Feb 14, 2026 4:40 pm

by henryford2 » Sat Feb 14, 2026 4:40 pm

I did not buy this originally or ever use it, so the condition is unknown. It does not appear to be abused or damaged, but even so sold as For Parts Only . $45 and that includes shipping in the CONUS.

0 Replies

245 Views

Last post by henryford2
Sat Feb 14, 2026 4:40 pm
WTB: LARGE DRUM REAR SPRING PERCHES

Last post by TRDxB2 « Sat Feb 14, 2026 3:19 pm
Replies: 4
by Scott C. » Sat Feb 14, 2026 11:11 am

First post

I am looking for a set of rear spring perches for a large drum rearend.

Last post

I am looking for a set of rear spring perches for a large drum rearend.

I have some. Sent PM & eMail to you

4 Replies

230 Views

Last post by TRDxB2
Sat Feb 14, 2026 3:19 pm
WTB: two man top

Last post by Layden Butler « Sat Feb 14, 2026 3:08 pm
Replies: 6
by rendo » Fri Dec 12, 2025 7:05 am

First post

Wanted to buy a two man top does not have to be Ford.
Thanks.
John

Last post

Just so we all speak the same language, maybe these pages are helpful.

6 Replies

673 Views

Last post by Layden Butler
Sat Feb 14, 2026 3:08 pm
Model T connecting rod mold

Last post by Gene_French « Sat Feb 14, 2026 10:28 am
Replies: 12
by Gene_French » Sun Apr 02, 2023 11:13 am

First post

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $110 plus $19.30 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Last post

to the top again ...thanks MTFCA

12 Replies

4697 Views

Last post by Gene_French
Sat Feb 14, 2026 10:28 am
Model A connecting rod mold

Last post by Gene_French « Sat Feb 14, 2026 10:28 am
Replies: 3
by Gene_French » Sun Mar 31, 2024 9:37 am

First post

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...

Last post

to the top again ...thanks MTFCA

3 Replies

948 Views

Last post by Gene_French
Sat Feb 14, 2026 10:28 am
Model A mainbearing mold

Last post by Gene_French « Sat Feb 14, 2026 10:27 am
Replies: 21
by Gene_French » Sun Jul 17, 2022 11:14 am

First post

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $175.00 + $19.30...

Last post

to the top again ...thanks MTFCA

21 Replies

8587 Views

Last post by Gene_French
Sat Feb 14, 2026 10:27 am
model T mainbearing mold

Last post by Gene_French « Sat Feb 14, 2026 10:27 am
Replies: 30
by Gene_French » Sun Jul 17, 2022 10:06 am

First post

my original design Model T mainbearing mold will pour the babbitt bearings in BOTH the block and caps of the Model T Ford engine ... the bearings will be poured at 1 1/8 diameter to allow for finish machining as needed ... instructions are included as well as my phone or email support ... price is $125 plus $19.30 priority mail postage in lower 48...

Last post

to the top again ...thanks MTFCA

30 Replies

12244 Views

Last post by Gene_French
Sat Feb 14, 2026 10:27 am
Mainbearin linebore unit models A and T Ford

Last post by Gene_French « Sat Feb 14, 2026 10:26 am

by Gene_French » Sat Feb 14, 2026 10:26 am

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $150...

0 Replies

97 Views

Last post by Gene_French
Sat Feb 14, 2026 10:26 am
bracket

Last post by Melba Nolan « Fri Feb 13, 2026 11:29 pm

by Melba Nolan » Fri Feb 13, 2026 11:29 pm

For sale: Bracket $25 plus postage

20220628_065848.jpg

0 Replies

202 Views

Last post by Melba Nolan
Fri Feb 13, 2026 11:29 pm
FS DIFFERENTIAL (SOLD)

Last post by Mark Chaffin « Fri Feb 13, 2026 11:10 pm
Replies: 2
by Mark Chaffin » Fri Feb 13, 2026 7:47 pm

First post

One complete early differential in excellent condition. Ready to install. Price is $150 plus $18.50 priority flat rate shipping. Mark Chaffin (951)805-0928

20260213_163856.jpg

20260213_164210.jpg

20260213_164222.jpg

Last post

Going to Kurt. Thank you.

2 Replies

326 Views

Last post by Mark Chaffin
Fri Feb 13, 2026 11:10 pm
Watts clutch offer to trade deleted

Last post by RGould1910 « Fri Feb 13, 2026 10:36 pm

by RGould1910 » Fri Feb 13, 2026 10:36 pm

Clutch appears to be defective. Sorry for not checking sooner

0 Replies

192 Views

Last post by RGould1910
Fri Feb 13, 2026 10:36 pm
FS Tool Kit Ford Model T

Last post by MAG « Fri Feb 13, 2026 8:14 pm
Replies: 5
by MAG » Thu Feb 12, 2026 10:07 am

First post

This kit is for a 1920 or later Ford Model T and includes all the original Ford Script tools! Here is what is included: T1349 Hub cap wrench, T1387 Adjustable wrench, T1903 Pliers, T1917 Double end wrench, T2335 Cylinder head wrench, T2336 Oil Cloth Tool Roll (reproduction), T2336 Tool Bag (reproduction), T2337 Oil Can (can has slightly bent oil...

Last post

Sold to Doug awaiting payment

5 Replies

408 Views

Last post by MAG
Fri Feb 13, 2026 8:14 pm
FS 3004 Cylinder Head Water Outlet $49.95

Last post by Daisy Mae « Fri Feb 13, 2026 7:34 pm
Replies: 3
by Tparts » Thu Feb 12, 2026 3:24 pm

First post

Available again is Part # 3004 1909-16 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

Last post

YEA!! Finally!

3 Replies

444 Views

Last post by Daisy Mae
Fri Feb 13, 2026 7:34 pm
WTB-dash bracket for my TruTime auto Watch

Last post by WorldChamp1914 « Fri Feb 13, 2026 4:48 pm
Replies: 4
by WorldChamp1914 » Fri Feb 13, 2026 1:10 am

First post

IMG_7464.jpeg

Last post

IMG_7466.jpeg

4 Replies

314 Views

Last post by WorldChamp1914
Fri Feb 13, 2026 4:48 pm
fatman steering wheels

Last post by Melba Nolan « Fri Feb 13, 2026 3:00 pm
Replies: 9
by Melba Nolan » Fri Aug 22, 2025 11:44 pm

First post

For sale: I have 2 fatman steering wheels. 1st one is a Bauer and the 2nd one is a Spencer. Wood is very good condition. Have not done any cleaning or polishing so you can make it what you want. Have a key for the Spencer. They are $500 each plus postage.
20250821_230246.jpg 20250821_230040.jpg 20250821_230013.jpg 20250821_233019.jpg...

Last post

Reduced price of $450 each (choice) plus postage

9 Replies

2734 Views

Last post by Melba Nolan
Fri Feb 13, 2026 3:00 pm
FS 1923-25 Sidelight brackets SOLD

Last post by Gleaner « Thu Feb 12, 2026 8:41 pm
Replies: 1
by Tparts » Thu Feb 12, 2026 7:14 pm

First post

For sale are a pair of sidelight brackets for 1923-25 and 26-27 TT C-cab trucks. $50.00 pr plus shipping. Lang’s 1-800-872-7871

Last post

Email sent

1 Replies

213 Views

Last post by Gleaner
Thu Feb 12, 2026 8:41 pm
FS 1909-14 Tail light Bracket SOLD

Last post by Gleaner « Thu Feb 12, 2026 8:39 pm
Replies: 1
by Tparts » Thu Feb 12, 2026 7:24 pm

First post

For Sale is an original 1909 - 1912 Touring/Roadster or 1913-14 Roadster Tail Light Bracket $25.00 plus shipping
Lang’s 1-800-872-7871

Last post

Email sent

1 Replies

266 Views

Last post by Gleaner
Thu Feb 12, 2026 8:39 pm
FS 5Z-212 Ford Body Bracket Bolt Wrench SOLD

Last post by Scott_Conger « Thu Feb 12, 2026 7:56 pm
Replies: 1
by Tparts » Thu Feb 12, 2026 6:36 pm

First post

For Sale is a nice Ford 5Z-212 Wrench used to hold the body mounting bolts from turning. $50.00 plus shipping Lang’s 1-800-872-7871

Last post

Hey Don

I'm yer boy...email sent

1 Replies

286 Views

Last post by Scott_Conger
Thu Feb 12, 2026 7:56 pm
FS Headlamp Double Sockets 1915/16

Last post by MAG « Thu Feb 12, 2026 6:53 pm
Replies: 10
by MAG » Mon Jul 28, 2025 6:35 pm

First post

I have 4 headlamp sockets for 1915 or 1916 Model T’s. These differ from the later ones in that the pins are 90 degrees off. This was done to align the filament horizontally to allow the headlamp to be focused. Note the later socket in the middle of the picture. The focus screw for the 1915/16 is at the top of the light bulb, not to the side of the...

Last post

The middle one was only shown in the picture to show the difference between the early and late double socket orientation.

10 Replies

947 Views

Last post by MAG
Thu Feb 12, 2026 6:53 pm
SOLD Jack Handle fits a ratchet type Ajax or Walker jack

Last post by MAG « Thu Feb 12, 2026 6:50 pm
Replies: 1
by MAG » Thu Feb 12, 2026 10:09 am

First post

This jack handle T2344 fits a ratchet type T2343 Ajax or Walker jack. $25 and $10 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Last post

Sold to Gary

1 Replies

236 Views

Last post by MAG
Thu Feb 12, 2026 6:50 pm
For Sale: New KW Coil Points

Last post by RajoRacer « Thu Feb 12, 2026 6:42 pm
Replies: 2
by RajoRacer » Thu Feb 12, 2026 1:19 pm

First post

I have a set of 4 new KW points available - photo coming later today - $65 includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Last post

Points spoken for - thanks MTFCA !

2 Replies

308 Views

Last post by RajoRacer
Thu Feb 12, 2026 6:42 pm
Several lots (#11-15) of left over parts from the improved Coupe project:

Last post by varmint « Thu Feb 12, 2026 6:07 pm
Replies: 1
by varmint » Thu Jan 29, 2026 9:44 pm

First post

Several lots (#11-15) of left over parts from the improved Coupe project:

screws 11-15.jpg

Set of (6) Transmission inspection cover SCREWS for added oil lint filter, 1/8 longer.
Zinc Round head, slot drive, machine screw 5/16-18 x 1/2 . Lot $0.50

As-is, no warranty.
UPS or USPS shipping (no FedEx).
A. Please claim BELOW that you want a set...

Last post

Set of (6) screws, now for 1¢.

1 Replies

773 Views

Last post by varmint
Thu Feb 12, 2026 6:07 pm
For Sale: 1908-1912ish Brass Headlamps

Last post by GGZ « Thu Feb 12, 2026 5:41 pm
Replies: 5
by GGZ » Fri Jan 09, 2026 8:59 pm

First post

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Last post

Still for sale

5 Replies

1116 Views

Last post by GGZ
Thu Feb 12, 2026 5:41 pm
For Sale: Large Rubes 3/4 Brass Bulb Horn Assembly

Last post by GGZ « Thu Feb 12, 2026 5:40 pm
Replies: 3
by GGZ » Fri Jan 23, 2026 11:57 am

First post

This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished....

Last post

Still for sale

3 Replies

585 Views

Last post by GGZ
Thu Feb 12, 2026 5:40 pm
FS; Dodge Bros. Spare Tire Carrier with four Lug Nuts

Last post by WaltM « Thu Feb 12, 2026 4:16 pm

by WaltM » Thu Feb 12, 2026 4:16 pm

For Sale Dodge Bros. spare tire carrier with four lug nuts. 3-7/8 inches between studs. Will need re-drilling for speedster. Price $275 plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

0 Replies

219 Views

Last post by WaltM
Thu Feb 12, 2026 4:16 pm
FS Early Manual

Last post by fordrelic « Thu Feb 12, 2026 4:00 pm

by fordrelic » Thu Feb 12, 2026 4:00 pm

For Sale: a 1914 original manual.

$112 a dollar per year since printed plus USPS mail.

0 Replies

212 Views

Last post by fordrelic
Thu Feb 12, 2026 4:00 pm
FS 1910-13 Driveshaft Housing w/Ball $600.00

Last post by Tparts « Thu Feb 12, 2026 3:52 pm
Replies: 2
by Tparts » Sun Feb 01, 2026 6:00 pm

First post

For Sale is a nice 1910 - 1913 2 piece driveshaft housing, no bump spool, ball and collar. $600.00 plus shipping Lang’s 1-800-872-7871

Last post

Price decrease

2 Replies

608 Views

Last post by Tparts
Thu Feb 12, 2026 3:52 pm
FS Accessory Anti-Theft Device $30.00

Last post by Tparts « Thu Feb 12, 2026 3:48 pm
Replies: 7
by Tparts » Wed Jan 07, 2026 10:23 pm

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $30.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

7 Replies

1380 Views

Last post by Tparts
Thu Feb 12, 2026 3:48 pm
FS Brass Exhaust Whistle $185.00

Last post by Tparts « Thu Feb 12, 2026 3:41 pm
Replies: 3
by Tparts » Sun Jan 25, 2026 5:23 pm

First post

For Sale is a reproduction Lucas Engineering Aermore Exhaust Whistle. $185.00 plus shipping. Lang’s 1-800-872-7871.

Last post

Price decrease

3 Replies

848 Views

Last post by Tparts
Thu Feb 12, 2026 3:41 pm
FS Jahn’s .100 OS Pistons w/pins $100.00 set

Last post by Tparts « Thu Feb 12, 2026 3:37 pm
Replies: 1
by Tparts » Mon Feb 02, 2026 8:41 pm

First post

For Sale is an older “New” set of .100 oversize Pistons with pins. $100.00 set plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

1 Replies

571 Views

Last post by Tparts
Thu Feb 12, 2026 3:37 pm
FS 1914 Rubes Brass Horn $110.00

Last post by Tparts « Thu Feb 12, 2026 3:35 pm
Replies: 1
by Tparts » Mon Feb 02, 2026 8:50 pm

First post

For Sale is an original 1914 “Rubes” all brass Horn. There are 3 dents that won’t shown when mounted. $110.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

1 Replies

612 Views

Last post by Tparts
Thu Feb 12, 2026 3:35 pm
FS 3004B 1917-25 Water Outlet $49.95

Last post by Tparts « Thu Feb 12, 2026 3:30 pm

by Tparts » Thu Feb 12, 2026 3:30 pm

Available again is Part # 3004B 1917-1925 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

0 Replies

161 Views

Last post by Tparts
Thu Feb 12, 2026 3:30 pm
For sale 4 new mounted block let tires

Last post by 4ham « Thu Feb 12, 2026 3:02 pm
Replies: 16
by 4ham » Mon Jan 19, 2026 3:27 pm

First post

IMG_0096.jpeg For sale are 4 new blockley tires and tubes mounted on new rims. I bought these about 4 years ago intending to use them on a project that fell through. They are mounted on brand new rims from Australia and I only put enough air in the tubes to mount them. Never were fully inflated. If you can use them, they will need to be picked up...

Last post

Tires are sold

16 Replies

1783 Views

Last post by 4ham
Thu Feb 12, 2026 3:02 pm
(PENDING) EKERN Rear Axle Emergency Repair Fixture (1909-1925)

Last post by WaltM « Thu Feb 12, 2026 2:57 pm
Replies: 7
by WaltM » Fri Nov 07, 2025 2:14 pm

First post

(PENDING) EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $160. plus shipping. Call or text...

Last post

Price reduced to $150 plus shipping

7 Replies

1171 Views

Last post by WaltM
Thu Feb 12, 2026 2:57 pm
FS; Dodge Bros. 15-1/4 Steering wheel

Last post by WaltM « Thu Feb 12, 2026 2:56 pm

by WaltM » Thu Feb 12, 2026 2:56 pm

For sale 15-1/4 inch OD steering wheel. Steering wheel is marked Dodge Bros. twice, around each keyway. Price $250. plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

0 Replies

167 Views

Last post by WaltM
Thu Feb 12, 2026 2:56 pm
FS: Brass 15-inch OD Steering Wheel with Nut

Last post by WaltM « Thu Feb 12, 2026 2:43 pm

by WaltM » Thu Feb 12, 2026 2:43 pm

For Sale brass 15-inch OD steering wheel with new brass nut. Single keyway repro. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

161 Views

Last post by WaltM
Thu Feb 12, 2026 2:43 pm
Camshaft Rear Bearing Reamer Bar

Last post by RajoRacer « Thu Feb 12, 2026 2:03 pm
Replies: 27
by vanco » Tue Feb 03, 2026 9:16 pm

First post

WTB: Or (Borrow One). Camshaft rear bearing reamer bar that is put through the camshaft journals to align bore the rear bearing. Just trying to rebuild my T engine the proper way. I don't have a lathe to make one, any help would be appreciated!
Thanks, John

Last post

I'll measure mine this afternoon.

27 Replies

1466 Views

Last post by RajoRacer
Thu Feb 12, 2026 2:03 pm
Holley G carburetor 1915-1918/sold

Last post by Corey Walker « Thu Feb 12, 2026 11:49 am

by Corey Walker » Thu Feb 12, 2026 11:49 am

Completely disassembled and cleaned, new float, float valve, venturi, and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

191 Views

Last post by Corey Walker
Thu Feb 12, 2026 11:49 am
FS Ford Wire Wheel Lug Nut Wrench

Last post by MAG « Thu Feb 12, 2026 10:44 am
Replies: 1
by MAG » Thu Feb 12, 2026 10:02 am

First post

Ford script T-2839 Wire wheel lug nut wrench. This is the original wrench supplied by Ford when you got wire wheels. $75 and $15 shipping. Email me at markpaulagember AT aol dot com

Last post

Sold to Dennis awaiting payment

1 Replies

200 Views

Last post by MAG
Thu Feb 12, 2026 10:44 am
FS 1926 Michigan License Plate Set – Restored/Repainted

Last post by MAG « Thu Feb 12, 2026 10:15 am

by MAG » Thu Feb 12, 2026 10:15 am

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. $125 and $15 shipping. Email me at markpaulagember AT aol dot com

0 Replies

187 Views

Last post by MAG
Thu Feb 12, 2026 10:15 am
FS 1926 Michigan License Plate (one only) – Unrestored

Last post by MAG « Thu Feb 12, 2026 10:13 am

by MAG » Thu Feb 12, 2026 10:13 am

Just as stated. A single 1926 Michigan license plate that is original unrestored. $50 and $10 shipping. Email me at markpaulagember AT aol DOT com

0 Replies

128 Views

Last post by MAG
Thu Feb 12, 2026 10:13 am
FS Nickel Radiator Cap – NEW

Last post by MAG « Thu Feb 12, 2026 10:12 am

by MAG » Thu Feb 12, 2026 10:12 am

A brand-new Nickel radiator cap. These are not in stock at the venders. $25 and $10 shipping. Email me at markpaulagember AT aol DOT com

0 Replies

171 Views

Last post by MAG
Thu Feb 12, 2026 10:12 am
FS Original Model T 1926/27 Walker Stamped Ratchet Style Jack

Last post by MAG « Thu Feb 12, 2026 10:10 am

by MAG » Thu Feb 12, 2026 10:10 am

Model T 1926/27 Walker stamped ratchet style jack T2343. This jack works as it should. These are not listed often and are hard to find. $150 and $15 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

0 Replies

185 Views

Last post by MAG
Thu Feb 12, 2026 10:10 am
FS Ford Script Single Brass Tube Tire Pump – Rebuilt

Last post by MAG « Thu Feb 12, 2026 10:04 am

by MAG » Thu Feb 12, 2026 10:04 am

Great condition original single brass tube Ford script tire pump. (1920-27) Rebuilt by Vern Cambell several years ago. $150 and $25 shipping. Email me at markpaulagember AT aol dot com

0 Replies

163 Views

Last post by MAG
Thu Feb 12, 2026 10:04 am
FS 6 Fluted Oil Cap – Steel no Script

Last post by MAG « Thu Feb 12, 2026 9:57 am
Replies: 2
by MAG » Mon Jul 28, 2025 6:40 pm

First post

6 fluted original steel oil cap. Plain top. (1915-16) $25 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com

Last post

Reposted one time

2 Replies

1169 Views

Last post by MAG
Thu Feb 12, 2026 9:57 am

New Topic

10639 topics

Page 1 of 107
- Jump to page:
1
2
3
4
5
…
107
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum