Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

19797 topics

Page 1 of 198
- Jump to page:
1
2
3
4
5
…
198
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

44948 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Misc. T goodies

Last post by Nate22huckster « Tue Apr 16, 2024 6:09 am
Replies: 2
by Model T Matt » Mon Apr 15, 2024 2:42 pm

First post

Buy the Bunch-$90.00 shipped to your door-New Wheel Puller-odds and ends call Matt 503-824-268one rad. cap-misc. timers-bent Apco steering brace

Last post

I'm interested in the four footman loops if they're 2-1/4 center to center

2 Replies

301 Views

Last post by Nate22huckster
Tue Apr 16, 2024 6:09 am
FS Ford Tail light

Last post by gary80005 « Tue Apr 16, 2024 2:16 am
Replies: 2
by fordrelic » Sat Apr 13, 2024 7:10 pm

First post

For Sale Ford Tail light.

$60 plus shipping

Lens has crack near bottom right.

Ford tailight.jpg

Last post

Is this still available?

2 Replies

336 Views

Last post by gary80005
Tue Apr 16, 2024 2:16 am
For Sale..Hand crank ratchet

Last post by dinosbunny « Mon Apr 15, 2024 10:49 pm

by dinosbunny » Mon Apr 15, 2024 10:49 pm

For Sale, Nice Hand crank ratchet with claw and spring. Nice and straight $55.00 includes shipping in lower 48
crank1.jpg
c2.jpg
c3.jpg
c4.jpg

0 Replies

113 Views

Last post by dinosbunny
Mon Apr 15, 2024 10:49 pm
For Sale: New TT Rocky Mountian Brakes

Last post by Philip Lawrence « Mon Apr 15, 2024 10:37 pm
Replies: 2
by Philip Lawrence » Tue Apr 02, 2024 5:35 pm

First post

New TT Rocky Mountian brake set up as sold by Chaffins Garage. Just a little shop wear. Retail on this assembly was $1045.00 my price is $900.00 plus shipping, save $145.00. Please emails only, I Don't check messages. Thanks for looking.

Last post

The Rocky Mountian Brakes are sold pending payment.

2 Replies

500 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 10:37 pm
New set of 21 x4.50 tubes and flaps

Last post by colonelpowers « Mon Apr 15, 2024 9:28 pm
Replies: 1
by colonelpowers » Mon Apr 15, 2024 3:07 pm

First post

I bought these new last year and I think that they were about $330 before tax and shipping. I will take $320 shipped.

Last post

The tubes and flaps are probably sold. There is a man who is supposed to come by on Saturday. If he doesn't show up I will let you all know.

1 Replies

153 Views

Last post by colonelpowers
Mon Apr 15, 2024 9:28 pm
Odds and Ends

Last post by Model T Matt « Mon Apr 15, 2024 9:05 pm
Replies: 3
by Model T Matt » Mon Apr 15, 2024 2:52 pm

First post

Assorted T treasures ? Misc.parts pile asking $75.00 shipped to your door call Matt 503-824-2681

Last post

Held for you Rich

3 Replies

292 Views

Last post by Model T Matt
Mon Apr 15, 2024 9:05 pm
Inner fender brackets fs

Last post by vping « Mon Apr 15, 2024 8:11 pm
Replies: 5
by CTLeonard » Wed Apr 10, 2024 10:26 am

First post

Fender brackets fs. 10.00 each plus shipping. ctleonard64@gmail.com IMG_20240410_092214403.jpg IMG_20240411_074157065.jpg IMG_20240411_074145241.jpg IMG_20240411_074201629.jpg

Last post

Great item arrived today.. Thank you. It's already cleaned, primed and painted.

5 Replies

329 Views

Last post by vping
Mon Apr 15, 2024 8:11 pm
Model T Axles and other stuff

Last post by JTT3 « Mon Apr 15, 2024 7:49 pm
Replies: 1
by pkhammer » Mon Apr 15, 2024 7:01 pm

First post

I have two model T rear axle assemblies including the driveshafts and radius rods. One is complete with brakes, one missing brakes. I need to find a home for them. No shipping but I can deliver to Luray. 1917-1925 era. $100 each. I also have a complete 1918 engine, a 1914 block, crankshafts, camshafts, etc all at VERY reasonable prices. Let me...

Last post

Thanks so much on the 1914 best John

1 Replies

210 Views

Last post by JTT3
Mon Apr 15, 2024 7:49 pm
sidelight brackets, a pair for center door sedans

Last post by ModelT46 « Mon Apr 15, 2024 7:02 pm

by ModelT46 » Mon Apr 15, 2024 7:02 pm

These are original brackets. Some service rust, but are nice. For the center door sedan. Some have used them on other closed Model Ts. $85 with the ride in the lower 48.

0 Replies

99 Views

Last post by ModelT46
Mon Apr 15, 2024 7:02 pm
Valve Stem Dust Covers

Last post by Model T Matt « Mon Apr 15, 2024 6:55 pm
Replies: 2
by Model T Matt » Mon Apr 15, 2024 2:55 pm

First post

For Sale an assortment of Dust covers asking $100.00 shipped to your Garage call Matt 503-824-268one

Last post

Held for you Thanks

2 Replies

209 Views

Last post by Model T Matt
Mon Apr 15, 2024 6:55 pm
WANTED-26-27 Carburetor Control Rod for NH carb

Last post by Brent Mize « Mon Apr 15, 2024 3:55 pm
Replies: 2
by Brent Mize » Mon Apr 15, 2024 12:18 pm

First post

I’m in need of a good throttle control rod for a 26-27 with and NH carb.
None of the vendors currently have these. I have made one but would prefer one made to the Ford Print.
Please let me know if you can help.
Thanks
Brent

Last post

Bob Bergstadt had one.
I purchased one from him.
Thanks
Brent

2 Replies

170 Views

Last post by Brent Mize
Mon Apr 15, 2024 3:55 pm
FS 3 sets of 26-27 bands 2 sets with new linings

Last post by colonelpowers « Mon Apr 15, 2024 3:26 pm
Replies: 1
by colonelpowers » Mon Apr 15, 2024 3:01 pm

First post

I have 3 sets of bands for sale. The two sets with new linings are nice and ready to go. The 3rd set is still dirty with old worn out linings but is in good shape. $225 plus shipping for all 3. IMG_20240414_181431.jpg

Last post

I found a set of 26-27 brake shoes that I will throw in as well. They are unlined.

1 Replies

152 Views

Last post by colonelpowers
Mon Apr 15, 2024 3:26 pm
TT Door Handles

Last post by Model T Matt « Mon Apr 15, 2024 3:07 pm

by Model T Matt » Mon Apr 15, 2024 3:07 pm

For Sale Not finished castings of TT Handles asking $80.00 for the group call 503-824-268one

0 Replies

101 Views

Last post by Model T Matt
Mon Apr 15, 2024 3:07 pm
1915-16 Headlamps

Last post by Model T Matt « Mon Apr 15, 2024 3:02 pm
Replies: 2
by Model T Matt » Mon Apr 15, 2024 2:48 pm

First post

Nice set of 1915/16 Headlamps adjuster is at 12 Oclock position asking $145.00 shipped to your door call Matt 503-824-268one

Last post

Held for Kevin Thanks

2 Replies

147 Views

Last post by Model T Matt
Mon Apr 15, 2024 3:02 pm
Apco Steering supports

Last post by Model T Matt « Mon Apr 15, 2024 3:00 pm

by Model T Matt » Mon Apr 15, 2024 3:00 pm

For Sale old and new unfinished cast supports asking $75.00 for all shipped to your door step call Matt 503-824-268one

0 Replies

179 Views

Last post by Model T Matt
Mon Apr 15, 2024 3:00 pm
FS Roadster seat back to Quarter panel corner supportss

Last post by Burlingtontguy « Mon Apr 15, 2024 2:54 pm
Replies: 1
by Burlingtontguy » Wed Apr 10, 2024 11:29 am

First post

I have a pair of seat back to quarter panel trim supports I believe for late 22-25 roadster bodies. also an original driver side fake door quarter panel. $110 for the supports and $325 for the quarter panel all plus shipping. e-mail or call me with questions, thanks , :twisted: Dennis 401-932-3191

Last post

TO THE TOP

1 Replies

219 Views

Last post by Burlingtontguy
Mon Apr 15, 2024 2:54 pm
Spoke Jacks

Last post by Model T Matt « Mon Apr 15, 2024 2:44 pm

by Model T Matt » Mon Apr 15, 2024 2:44 pm

For Sale 3 spoke Jacks $90.00 shipped to your door call Matt 503-824-268one

0 Replies

189 Views

Last post by Model T Matt
Mon Apr 15, 2024 2:44 pm
Wanted model T round gas tank strap

Last post by Karl Von Neumann « Mon Apr 15, 2024 2:16 pm
Replies: 8
by spedur » Sat Apr 13, 2024 6:41 pm

First post

looking for one.

Last post

Got it!!!!

8 Replies

238 Views

Last post by Karl Von Neumann
Mon Apr 15, 2024 2:16 pm
Minnesota Swapmeet April 20.

Last post by BobP « Mon Apr 15, 2024 12:38 pm
Replies: 6
by BobP » Thu Mar 21, 2024 12:50 pm

First post

We are having our 7th annual prewar Model T-Model A Ford era Swap meet, car show at our farm on Saturday April 20, 2024 at 7am. All makes are welcome. Free overnight primitive camping. Free setup and admission. Location is at Bob and Helen Peterson's, 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Any questions, CALL Bob, 507...

Last post

bttttttttttttt

6 Replies

587 Views

Last post by BobP
Mon Apr 15, 2024 12:38 pm
Wanted: Headlight (Found)

Last post by Philip Lawrence « Mon Apr 15, 2024 12:45 am
Replies: 2
by Philip Lawrence » Sun Apr 14, 2024 12:15 am

First post

I'm looking for a one complete headlight assembly for a 1920 to 1925 model.

Last post

Karl, sent you an email

2 Replies

281 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 12:45 am
For Sale: New in box 1924-1925 hood

Last post by Philip Lawrence « Mon Apr 15, 2024 12:22 am
Replies: 1
by Philip Lawrence » Tue Apr 02, 2024 5:46 pm

First post

New Rootlieb 1924-1925 Hood. Has never been out of the sealed box from Rootlieb. Retail price is $425.00 my price is $350.00 plus shipping, save $75.00. No need to take a photo of a box. Emails only please. Thanks for looking

Last post

The hood is still available. You won't get a $75.00 discount from Rootlieb or any of the vendors.

1 Replies

438 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 12:22 am
for sale - distributor

Last post by dinosbunny « Mon Apr 15, 2024 12:07 am
Replies: 1
by dinosbunny » Sun Apr 14, 2024 10:50 pm

First post

For Sale..Texas T/Birdhaven Distributor with extra points, coil, condensers, rotor, cap and plug/coil wires. Only used to start a car and decided to go with coils and timer. THIS IS A 12 VOLT SETUP. $320.00 shipped to your door in the lower 48.
dist1.jpg
dist2.jpg
dist3.jpg
dist4.jpg

Last post

sold pending payment, Mark, please check your email..thank you

1 Replies

171 Views

Last post by dinosbunny
Mon Apr 15, 2024 12:07 am
PENDING headlights 26/27

Last post by Joer357 « Sun Apr 14, 2024 7:38 pm
Replies: 2
by fordrelic » Sat Apr 13, 2024 7:04 pm

First post

For Sale one pair of 26/27 headlights.

$100 plus shipping.

26 headlights.jpg 26 headlights .jpg

Last post

Hi are the headlights still for sale

2 Replies

272 Views

Last post by Joer357
Sun Apr 14, 2024 7:38 pm
WTB Casting between head and Radiator to fit 1912

Last post by 49willard « Sun Apr 14, 2024 5:48 pm
Replies: 6
by 49willard » Fri Apr 12, 2024 9:21 pm

First post

Looking for an original water outlet elbow.

Last post

email sent

6 Replies

363 Views

Last post by 49willard
Sun Apr 14, 2024 5:48 pm
Still looking for

Last post by Dollisdad « Sun Apr 14, 2024 5:21 pm
Replies: 5
by Dollisdad » Sat Apr 06, 2024 7:55 pm

First post

A no hump spool. IMG_8804.jpeg Thanks for your help.

Last post

Found. Thanks everyone.

5 Replies

871 Views

Last post by Dollisdad
Sun Apr 14, 2024 5:21 pm
Part nr. 3009 B needed

Last post by Magnusw « Sun Apr 14, 2024 4:25 pm
Replies: 6
by Magnusw » Wed Apr 10, 2024 4:13 am

First post

I need cylinder front cover, 3009 B, for non-generator motor.
. Thanks

Last post

Have you found what postage would be to Sweden?

6 Replies

585 Views

Last post by Magnusw
Sun Apr 14, 2024 4:25 pm
FS Hand Crank Siren

Last post by ThreePedalTapDancer « Sun Apr 14, 2024 2:47 pm
Replies: 3
by ThreePedalTapDancer » Mon Apr 08, 2024 4:23 pm

First post

Here is a vintage hand crank siren for an early fire, police or ambulance vehicle. It is well made, heavy duty construction, with precision steel internal gears and ball bearings. It has a solid brass cranking handle. It has a side mount design mounting bracket, and looks like a reinforcing gusset added on at sometime in its life for more...

Last post

Somebody needs this for their collection or T, exciting and fun for the grandkids to crank.

3 Replies

387 Views

Last post by ThreePedalTapDancer
Sun Apr 14, 2024 2:47 pm
WTB - a winter radiator cover for a 1919 Touring

Last post by frontyboy « Sun Apr 14, 2024 2:36 pm
Replies: 17
by DavidGMeier » Sun Sep 18, 2022 12:25 am

First post

I would like to get a winter radiator cover for a 1919 Touring.

Last post

I have a NOS one hanging on the wall.. Will send you a photo and measurements Monday if you still need one. I have no idea what year this would fit.

brasscarguy.

17 Replies

1552 Views

Last post by frontyboy
Sun Apr 14, 2024 2:36 pm
Wanted: 26-27 Right Spindle (Found)

Last post by Karl Von Neumann « Sun Apr 14, 2024 12:45 pm
Replies: 2
by Philip Lawrence » Sun Apr 14, 2024 12:05 am

First post

I'm looking for a right (passenger) side 1926 - 27 spindle. Thanks in advance.

Last post

Also have I can just box them with the tire carrier

2 Replies

165 Views

Last post by Karl Von Neumann
Sun Apr 14, 2024 12:45 pm
For Sale: New E.Z. Adjustable Slider

Last post by Mark Chaffin « Sun Apr 14, 2024 12:25 pm
Replies: 5
by Philip Lawrence » Tue Apr 02, 2024 6:04 pm

First post

New E.Z. Adjustable Slider part number 2566EZ in Chaffin's catalog. Retail price is $85.00 mine is $65.00 plus shipping, save $20.00. Emails only please, thanks for looking.

Last post

Yes. For the Rocky Mountain Brake setup.

5 Replies

757 Views

Last post by Mark Chaffin
Sun Apr 14, 2024 12:25 pm
quick bolt set ( original )

Last post by Gene_French « Sun Apr 14, 2024 8:49 am
Replies: 4
by Gene_French » Fri Mar 29, 2024 3:11 pm

First post

i have a set of original quick-bolts for sale ... these do not have any manufacturers marking on them , so the manufacturer is unknown ... i replaced missing sleeve nuts on 2 of the bolts and replaced several of the forked keepers also ... i will post photos when i re-size to fit this site ... price is $150.00 + $10.20 postage in lower 48 states ,...

Last post

Quick bolt set sold on ebay in less than 24 hours ... Gene French

4 Replies

773 Views

Last post by Gene_French
Sun Apr 14, 2024 8:49 am
For Sale: Accessory oval rear window (Sold)

Last post by Philip Lawrence « Sat Apr 13, 2024 11:52 pm
Replies: 3
by Philip Lawrence » Tue Mar 19, 2024 2:24 pm

First post

This is a model T era accessory. An aluminum frame that measures 12 7/8 x 6 7/8 for the Runabout or Touring. Uses Isinglass for the window. Makes a simple screw on assembly. Polish it to a mirror shine and add bling to the rear of your car. The top photo shows the rearward facing side (it had been installed incorrectly). If you look closely in...

Last post

This has been sold

3 Replies

461 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:52 pm
Wanted: Early parts and accessories catalogs.

Last post by Philip Lawrence « Sat Apr 13, 2024 11:51 pm
Replies: 1
by Philip Lawrence » Wed Mar 27, 2024 1:14 am

First post

I'm interested in buying original 1900 to 1915 parts and accessories catalogs by the many companies that catered to the early motorists. I especially would like a pre 1910 Dykes parts and accessories catalog. Please contact me by email through the forum. Thanks in advance.

Last post

Always interested in purchasing early parts and accessories catalogs.

1 Replies

312 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:51 pm
Wanted: Early 1920 parts

Last post by Philip Lawrence « Sat Apr 13, 2024 11:43 pm
Replies: 9
by Philip Lawrence » Wed Mar 06, 2024 12:45 am

First post

I'm looking for an early starter switch and frame mounted bracket that was riveted to the frame. These were separate parts. They are shown on page 279 (lower corner) of Bruce McCalley's book. I'm also looking for a magneto horn as shown on the same page.

Lastly I need a spare tire carrier for the rear of the car. I'm looking for one in very good...

Last post

I'm still looking for the starter switch and mounting bracket.

9 Replies

848 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:43 pm
For Sale: Complete set of TT hub caps

Last post by Philip Lawrence « Sat Apr 13, 2024 11:30 pm
Replies: 5
by Philip Lawrence » Tue Apr 02, 2024 6:14 pm

First post

I have two new chrome plated TT rear hub caps and one new standard size chrome hub cap and an additional very nice original hub cap that is chrome plated for $50.00 plus shipping. Emails only please

Last post

These are still available.

5 Replies

364 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:30 pm
Capacitors for Model T Ford Ignition Coils?

Last post by KWTownsend « Sat Apr 13, 2024 8:12 pm
Replies: 4
by Ron Patterson » Thu Mar 14, 2024 11:17 am

First post

For Sale, replacement capacitors for Model T Ford ignition Coil rebuilding. These are excess to my needs.
Type 418P Orange Drop, Round Profile, Polyester Film-Foil capacitors. Capacitance .47 uF, 400v, dV/dt rating of 700 volts/uS. I have installed over 25,000 of these capacitors over the years with no problems or component failures.
Perfect for...

Last post

Got mine yesterday!
Thanks, Ron!

: ^ )

Keith

4 Replies

693 Views

Last post by KWTownsend
Sat Apr 13, 2024 8:12 pm
FS switchs

Last post by vping « Sat Apr 13, 2024 7:48 pm
Replies: 1
by fordrelic » Sat Apr 13, 2024 7:07 pm

First post

For Sale two switch plates.

$40 plus shipping T switch .jpg T switch back.jpg

Last post

Email sent

1 Replies

221 Views

Last post by vping
Sat Apr 13, 2024 7:48 pm
FS running boards

Last post by fordrelic « Sat Apr 13, 2024 7:00 pm

by fordrelic » Sat Apr 13, 2024 7:00 pm

I believe these are TT running boards with what I have heard called boot scrapers.

$100 plus shipping

TT running boards.jpg

0 Replies

128 Views

Last post by fordrelic
Sat Apr 13, 2024 7:00 pm
26/27 Big Drum Ruckstell

Last post by namdc3 « Sat Apr 13, 2024 6:27 pm

by namdc3 » Sat Apr 13, 2024 6:27 pm

1926 1927 Ruckstell axel. I got it with other parts so I don’t know its history. It has the long shift lock and shifts like it should. I took the shift lock off and things look clean and oily inside. Comes with two wooden wheel hubs that were very tight on the axles. Keyways look good, but one side had the thread tip bent. I don’t think the axle...

0 Replies

254 Views

Last post by namdc3
Sat Apr 13, 2024 6:27 pm
Wanted to Buy Model T Ford Ignition Coils

Last post by Ron Patterson « Sat Apr 13, 2024 5:15 pm

by Ron Patterson » Sat Apr 13, 2024 5:15 pm

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal...

0 Replies

144 Views

Last post by Ron Patterson
Sat Apr 13, 2024 5:15 pm
1911-16 Tire Rod End Bolts New Old Stock F/S

Last post by Layden Butler « Sat Apr 13, 2024 4:06 pm

by Layden Butler » Sat Apr 13, 2024 4:06 pm

New Old Stock bolts for ends of the tie rod, authentic supplied by FORD 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $125 pair, domestic postage $10. These are NOT reproduction but are New Old Stock. Threaded on top for brass oilers. Oiler example not included.

0 Replies

172 Views

Last post by Layden Butler
Sat Apr 13, 2024 4:06 pm
Jones tachometer head F/S

Last post by Layden Butler « Sat Apr 13, 2024 3:51 pm

by Layden Butler » Sat Apr 13, 2024 3:51 pm

Brass case with bevel glass, 3600 RPM, 3 diameter face. $265 including domestic postage.

0 Replies

176 Views

Last post by Layden Butler
Sat Apr 13, 2024 3:51 pm
FREE 2 Engine Blocks 1926 SPOKEN FOR!

Last post by Layden Butler « Sat Apr 13, 2024 3:36 pm

by Layden Butler » Sat Apr 13, 2024 3:36 pm

2 bare 1926-27 engine blocks, pick them up here in Northern California. This is a one time offer, they go out in next scrap metal collection.
SPOKEN FOR, NO LONGER AVAILABLE.

0 Replies

225 Views

Last post by Layden Butler
Sat Apr 13, 2024 3:36 pm
WTB Early Pliers, Part No. T 1903

Last post by BigAl « Sat Apr 13, 2024 2:53 pm
Replies: 52
by BigAl » Mon Sep 18, 2023 12:47 pm

First post

The last tool I need to complete my 1911 Tool Kit! Thank you MTFCA and Bob for helping me with finding and buying the other two tools I needed. The following picture is the T 1903 Pliers I am looking for. Any help or leads will be great fully appreciated. 1911 T 1903 PLIERS - 091523.JPG

Last post

The last tool I need to complete my 1911 Tool Kit! Thank you MTFCA and Bob for helping me with finding and buying the other two tools I needed. The following picture is the T 1903 Pliers I am looking for. Any help or leads will be great fully appreciated.1911 T 1903 PLIERS - 091523.JPG

52 Replies

4643 Views

Last post by BigAl
Sat Apr 13, 2024 2:53 pm
FS Radiator Water Bags (SOLD)

Last post by ThreePedalTapDancer « Sat Apr 13, 2024 2:15 pm

by ThreePedalTapDancer » Sat Apr 13, 2024 2:15 pm

Two original T era canvas radiator water bags. Nice graphics, neat item for your next tour. Complete with cap, and cork stopper. These were used to carry cool water. When filled, they would sweat the water through the canvas, resulting in cold water to drink or to pour in radiator. 110 includes shipping.

IMG_0660.jpeg

0 Replies

186 Views

Last post by ThreePedalTapDancer
Sat Apr 13, 2024 2:15 pm
WTB 1912 Running Boards

Last post by Bill Everett « Sat Apr 13, 2024 2:09 pm
Replies: 1
by Bill Everett » Thu Apr 04, 2024 11:08 am

First post

I'd like to find a new pair that you're not going to use.

Please text me a couple of pictures at 901-496-8795, or e-mail at bill.everett@epickett.com, as well as letting me know how much $$ you'd like.

Thanks.

Last post

A used pair would work, too. Please text me a couple of pictures at 901-496-8795, or e-mail me at bill.everett@epickett.com, as well as letting me know how much $$ you'd like.

Thanks.

Bill Everett

1 Replies

285 Views

Last post by Bill Everett
Sat Apr 13, 2024 2:09 pm
Stewart speedometer mounting bracket wanted

Last post by Layden Butler « Sat Apr 13, 2024 1:55 pm

by Layden Butler » Sat Apr 13, 2024 1:55 pm

Bracket needed to mount my Stewart speedometer head to a wooden firewall. Any of these pictured would work, brass or iron, or any other style. Thanks for looking.

0 Replies

92 Views

Last post by Layden Butler
Sat Apr 13, 2024 1:55 pm
small emergecy brake drums

Last post by dinosbunny « Sat Apr 13, 2024 12:48 pm
Replies: 2
by dinosbunny » Thu Apr 11, 2024 11:07 pm

First post

For Sale..Pair of small emergency brake drums $25 plus shipping
hub4.jpg
hub3.jpg
hub2.jpg

Last post

sold, pending payment, thank you

2 Replies

279 Views

Last post by dinosbunny
Sat Apr 13, 2024 12:48 pm
26-27 running board brackets

Last post by dinosbunny « Sat Apr 13, 2024 12:47 pm
Replies: 3
by dinosbunny » Thu Apr 11, 2024 10:59 pm

First post

For Sale..Pair of 26-27 running board bracket, good condition, $30 plus shipping
bracket1.jpg
bracket2.jpg
bracket3.jpg

Last post

sold to morgan, pending payment, please check your email, thank you

3 Replies

214 Views

Last post by dinosbunny
Sat Apr 13, 2024 12:47 pm
FS Brass Long Horn (SOLD)

Last post by MikeG « Sat Apr 13, 2024 11:48 am
Replies: 2
by ThreePedalTapDancer » Fri Apr 12, 2024 3:26 pm

First post

Original “Long Horn 3” manually operated ahooga horn. Very nice, clean condition. No damage. Brass funnel. Works great. Ready to mount and use. 9.5 long. 250 includes shipping.

IMG_0638.jpeg IMG_2832.jpeg

Last post

Ed, I will buy this if it is still available. I will send you a message. Thanks, MikeG

2 Replies

303 Views

Last post by MikeG
Sat Apr 13, 2024 11:48 am
Valve lappers/ wall hangers fs

Last post by CTLeonard « Sat Apr 13, 2024 9:17 am
Replies: 2
by CTLeonard » Fri Apr 12, 2024 12:49 pm

First post

Couple of old girls for the display case. 8.00 each plus shipping. ctleonard64@gmail.com they do work IMG_20240412_114523385.jpg IMG_20240412_114509915.jpg

Last post

The long one is still available, yes it works

2 Replies

306 Views

Last post by CTLeonard
Sat Apr 13, 2024 9:17 am
SOLD! Gas Gauge for Model T tank

Last post by Walt Wise « Sat Apr 13, 2024 6:30 am
Replies: 1
by Walt Wise » Fri Apr 12, 2024 8:21 am

First post

Gasoline gauge for Model T tank for sale. When screwed into the tank, you release the lock on top of the cap and the cork float activates the center rod in the cap to go up, which reveals by the gallon measurements on the rod to inform you of the number of gallons of gas in the tank. Asking $95 plus $14 shipping to any of the lower 48 contiguous...

Last post

Thanks MTFCA!!!

Walt Wise

1 Replies

289 Views

Last post by Walt Wise
Sat Apr 13, 2024 6:30 am
FS Bevin Brass Bermuda Bell (SOLD)

Last post by Lawrence « Fri Apr 12, 2024 10:20 pm
Replies: 1
by ThreePedalTapDancer » Fri Apr 12, 2024 3:00 pm

First post

Here is an original T era Bevin polished brass Bermuda bell. It has a nice polish, no dents or cracks. It works great, very loud DING DONG! when plunger is depressed. It has a 1/8 thick polished brass mounting plate, brass plunger knob, and brass screws. Very clean. Ready to mount under your floor board. I have one on both my Ts. Great fun. 275...

Last post

Hi ed, i would like your bell please. You sent a horn to me last year. Thanks Chris Lawrence. NZ

1 Replies

211 Views

Last post by Lawrence
Fri Apr 12, 2024 10:20 pm
FS 3-1932 B Manifolds. $75 FOR ALL

Last post by got10carz « Fri Apr 12, 2024 9:48 pm
Replies: 1
by got10carz » Mon Mar 25, 2024 11:49 am

First post

For Sale. 3 Manifolds. These are considered a performance upgrade on a T. All have issues, intake has 1 broke ear. 1 exhaust has crack, 1 exhaust worn pipe flange.
$75 for all. Steve 701 212 5009

Last post

To the top.

1 Replies

396 Views

Last post by got10carz
Fri Apr 12, 2024 9:48 pm
FS: 1926-1927 Coil box, new wood

Last post by WaltM « Fri Apr 12, 2024 7:35 pm

by WaltM » Fri Apr 12, 2024 7:35 pm

For sale 1926-1927 coil box. Coil box was bead blasted, primed, and painted. Coil box was redone years ago, so there are some scuff marks on paint. Coil box comes with new top cover gasket and new wood. Wood had sealer applied for moisture resistance .Overall nice coil box. Price $200 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

131 Views

Last post by WaltM
Fri Apr 12, 2024 7:35 pm
Assortment of wrenches fs

Last post by DSWKPT « Fri Apr 12, 2024 6:17 pm
Replies: 5
by CTLeonard » Thu Apr 11, 2024 12:27 pm

First post

Believe to be mainly A wrenches, the T-handle is a Firestone. 8.00 each plus shipping. ctleonard64@gmail.com IMG_20240411_112040985.jpg IMG_20240411_112029354.jpg

Last post

Hey Mike, I’d like to buy one of your wrenches, the right one of the two with the hex holes behind the open end. I’ll send you email through the forum. Thanks.

5 Replies

421 Views

Last post by DSWKPT
Fri Apr 12, 2024 6:17 pm
FS: Brass Radiator Neck License Plate Bracket (SOLD)

Last post by bryan831daniel « Fri Apr 12, 2024 6:01 pm
Replies: 1
by WaltM » Fri Apr 12, 2024 1:28 pm

First post

(SOLD) brass radiator neck license plate bracket. For speedster or brass era car. Neverout model 7 Rose MFG Co. The carriage bolts, washers, and nuts are steel painted brass. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

Voicemail sent. ~Bryan

1 Replies

210 Views

Last post by bryan831daniel
Fri Apr 12, 2024 6:01 pm
FS: Transmission Driven Gear puller Dealer Tool 5Z326 (SOLD)

Last post by RGould1910 « Fri Apr 12, 2024 11:57 am
Replies: 1
by WaltM » Fri Apr 12, 2024 11:39 am

First post

SOLD Transmission Driven Gear puller, dealer tool 5Z326. Good threads and disc turns freely. Price $80 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

Email sent

1 Replies

220 Views

Last post by RGould1910
Fri Apr 12, 2024 11:57 am
FS; Threads Restorer/chase National Tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:52 am

by WaltM » Fri Apr 12, 2024 11:52 am

(SOLD) threads restorer tool by National. Tool is used to straighten and clean threads (thread chaser). Tool has six dies; 5/8 x18. 3/4 x 16, 7/8 x 14, 1 x 14, 1-1/8 x 12, and 1-1/4 x 12. Tool helps prevent cross threading. First die 5/8 x 18 will work on rear axles that have damaged threads from removing stubborn hubs. Tool clamps on the inside...

0 Replies

243 Views

Last post by WaltM
Fri Apr 12, 2024 11:52 am
FS: Transmission Clutch drum removal tool. 5Z314 dealer tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:34 am

by WaltM » Fri Apr 12, 2024 11:34 am

(SOLD) transmission clutch drum removal tool 5Z314, Dealer tool. Good threads. Price $80 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

182 Views

Last post by WaltM
Fri Apr 12, 2024 11:34 am
FS: Apco Perch removal Tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:30 am

by WaltM » Fri Apr 12, 2024 11:30 am

(SOLD) APCO front axle perch removal tool. Good threads. Four jaws wrap around axle to push out perch. NOTE; tool will not remove 100 year old rusted in perches without some prep work. I have had good luck soaking perches in rust penetrant (couple of days), and then put the perch in vise (with brass jaws) and use the axle as leverage. Move axle...

0 Replies

237 Views

Last post by WaltM
Fri Apr 12, 2024 11:30 am
Running board tool box fs

Last post by CTLeonard « Fri Apr 12, 2024 11:22 am

by CTLeonard » Fri Apr 12, 2024 11:22 am

Has had a hard time. Missing a latch extra holes and some dents. More was spent on primer than it's worth. Measures 21 ,9 deep 6 tall. 15.00 plus shipping. ctleonard64@gmail.com IMG_20240412_101040388.jpg IMG_20240412_101022948.jpg IMG_20240412_101015120.jpg IMG_20240412_100940653.jpg

0 Replies

211 Views

Last post by CTLeonard
Fri Apr 12, 2024 11:22 am
ignition switch

Last post by vping « Thu Apr 11, 2024 8:34 pm
Replies: 7
by dinosbunny » Sun Apr 07, 2024 11:44 pm

First post

For Sale... 19-25 ignition switch, original plate, switch and meter, has a reproduction pin type back plate with new tumbler from langs with 2 keys. All taken down to bare metal, primed, painted and tested for continuity, ready to install. $165.00 shipped anywhere in the lower 48.
switch1.jpg
switch2.jpg
switch3.jpg
switch4.jpg

Last post

Wish I jumped on this.

7 Replies

795 Views

Last post by vping
Thu Apr 11, 2024 8:34 pm
WTB Speedometer Cable & Housing

Last post by SurveyKing « Thu Apr 11, 2024 8:19 pm

by SurveyKing » Thu Apr 11, 2024 8:19 pm

Hello, I am in need of a decent speedometer cable and housing for my 1924 Touring with a Stewart 160 mounted on the right side of the dash. The length of the cable should be 63 . Call me or email me if you have something. Thank You very much.

Daniel Snell
Danielsnell2@twc.com
210-279786 4

0 Replies

129 Views

Last post by SurveyKing
Thu Apr 11, 2024 8:19 pm
for sale 15-16 steering gear case

Last post by dinosbunny « Thu Apr 11, 2024 7:31 pm
Replies: 6
by dinosbunny » Mon Apr 08, 2024 11:09 pm

First post

For Sale 15-16 brass steering gear case
$30 plus shipping
quad1.jpg
quad2.jpg
quad3.jpg
quad4.jpg

Last post

Gear box is sold pending payment

6 Replies

515 Views

Last post by dinosbunny
Thu Apr 11, 2024 7:31 pm
A I don't know coil. Sold, someone had a use for her

Last post by RajoRacer « Thu Apr 11, 2024 5:24 pm
Replies: 5
by CTLeonard » Thu Apr 11, 2024 1:43 pm

First post

Never seen one like this. Does anybody have to have it? ctleonard64@gmail.com IMG_20240411_123959979.jpg IMG_20240411_123942393.jpg IMG_20240411_123935083.jpg

Last post

The coil in the cleaner above also has the same lid !

5 Replies

459 Views

Last post by RajoRacer
Thu Apr 11, 2024 5:24 pm
FS: Wood Steering Wheel

Last post by tselliott « Thu Apr 11, 2024 5:16 pm

by tselliott » Thu Apr 11, 2024 5:16 pm

Nice solid wood steering wheel with 2 keyway spider.
There are some blemishes near the joint, which is nice and tight. Overall a really nice solid wheel
$150 plus shipping
Scott Elliott
971-5O6-94O2

0 Replies

231 Views

Last post by tselliott
Thu Apr 11, 2024 5:16 pm
coil box 17/25

Last post by BarrettR « Thu Apr 11, 2024 4:39 pm
Replies: 5
by Melba Nolan » Mon Nov 13, 2023 7:58 pm

First post

For sale: coil box. In good condition. $155 plus postage.

20220607_092858.jpg 20220607_092949.jpg

20220607_092909.jpg

Last post

In 17' the switch was on the coil box.

5 Replies

778 Views

Last post by BarrettR
Thu Apr 11, 2024 4:39 pm
Wooden top bows available

Last post by CTLeonard « Thu Apr 11, 2024 3:47 pm
Replies: 4
by CTLeonard » Wed Apr 10, 2024 2:51 pm

First post

I've recently started to steam bend oak bows for model A roadsters. Thought I could offer up bows for the model T. It would require a pattern or at least a good drawing for me to go from. Any inquiries please email me at ctleonard64@gmail.com IMG_20240410_133912524.jpg IMG_20240410_133844716.jpg IMG_20240410_133832764.jpg IMG_20240410_133743880.jpg

Last post

Appreciate the offer. Thank you

4 Replies

351 Views

Last post by CTLeonard
Thu Apr 11, 2024 3:47 pm
FS 1926 roadster body

Last post by Karl Von Neumann « Thu Apr 11, 2024 3:43 pm
Replies: 25
by Karl Von Neumann » Wed Jan 10, 2024 7:47 am

First post

1926 roadster body for sale real decent shape minor rust trunk lid window posts window (no glass) and gas tank included includes a historical document for a 27 $2000 located SE Wisconsin

Last post

Move to top

25 Replies

3115 Views

Last post by Karl Von Neumann
Thu Apr 11, 2024 3:43 pm
20 25 roadster body project

Last post by Karl Von Neumann « Thu Apr 11, 2024 3:43 pm
Replies: 4
by Karl Von Neumann » Tue Feb 20, 2024 2:05 pm

First post

Figured I'd throw this out there decent clean sheet metal of a 20 to 25 roadster turtle Included chassis not included at this time what's included body. Turtle 4 fenders 2 rears are so so but workable fronts are very nice and 2 running boards will not ship local pick up $1200 OBO located pleasant prairie wisconsin

Last post

Move to top

4 Replies

1047 Views

Last post by Karl Von Neumann
Thu Apr 11, 2024 3:43 pm
23-25 stanchions fs

Last post by CTLeonard « Thu Apr 11, 2024 1:38 pm

by CTLeonard » Thu Apr 11, 2024 1:38 pm

In overall good shape. Has some slight pitting on top halfs. 100.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20240411_123256088.jpg IMG_20240411_123224229.jpg IMG_20240411_123145421.jpg IMG_20240411_123113239.jpg

0 Replies

114 Views

Last post by CTLeonard
Thu Apr 11, 2024 1:38 pm
WTB Original 1912 Hubcaps - one or more

Last post by Original Smith « Thu Apr 11, 2024 12:34 pm
Replies: 5
by 1913Runabout » Thu Apr 04, 2024 12:58 pm

First post

I'm looking to buy one or more original 1912 only hubcaps in serviceable condition. I have nice reproductions, but prefer original even if not perfect. Canadian caps are superficially similar, but do not have the tall 'F' and sometimes have a little triangle below the 'Ford'. Note that there is no 'MADE IN USA'. My first time posting. I thing...

Last post

I agree with you Brian. Stay with it, you will find them. Even the correct common 1913 hubcaps are getting hard to find.

5 Replies

568 Views

Last post by Original Smith
Thu Apr 11, 2024 12:34 pm
15 touring FS

Last post by Nv Bob « Thu Apr 11, 2024 11:47 am

by Nv Bob » Thu Apr 11, 2024 11:47 am

Posting here as I can't post in other section
15 touring good solid T no rust and wood solid runs great but after drive on and off the trailer will need bands and probly tubes and this be ready to enjoy
Has clear NV title in my name
Asking 7500 obo located Sparks Nv
Send an email for more pics
Bob
Jalopyt@yahoo.com

0 Replies

300 Views

Last post by Nv Bob
Thu Apr 11, 2024 11:47 am
WTB 19-20 ignition switch

Last post by Karl Von Neumann « Thu Apr 11, 2024 10:19 am
Replies: 5
by Model T Mark » Mon Mar 25, 2024 8:39 pm

First post

I’m looking for a really good or perhaps a new old stock ignition switch with the heavy cast light switch handle. We are struggling with broken pot metal parts. This is the last part needed to complete the restoration of a high point show car. It’s a Canadian export to Australia. Any help would be greatly appreciated. Thanks in advance. Mark...

Last post

I’ll take it apart and get some pictures. I knew there were several and the one I’m looking for is the one that has the large plate secured by two acres at the bottom that attaches it to the plate. Ours is so warped it doesn’t make good contact with the dim side. I have filed it flat and can’t do anything more to make it useful.

Mark ill pull...

5 Replies

420 Views

Last post by Karl Von Neumann
Thu Apr 11, 2024 10:19 am
Horn button fs

Last post by CTLeonard « Thu Apr 11, 2024 10:15 am

by CTLeonard » Thu Apr 11, 2024 10:15 am

Will sell as a lot.one of them got a grinder mark. 40.00 for all three plus shipping. ctleonard64@gmail.com IMG_20240411_090907203.jpg IMG_20240411_090847231.jpg IMG_20240411_090830998.jpg

0 Replies

150 Views

Last post by CTLeonard
Thu Apr 11, 2024 10:15 am
26-27 front fender brace fs

Last post by CTLeonard « Thu Apr 11, 2024 9:20 am

by CTLeonard » Thu Apr 11, 2024 9:20 am

One is getting pitted, both have been welded. One needs .more welding. 30.00 for the pair plus shipping. There's also pictured another good set that I don't know the year of. ctleonard64@gmail.com IMG_20240411_081312031.jpg IMG_20240411_081253169.jpg IMG_20240411_081233106.jpg IMG_20240411_081210005.jpg IMG_20240411_081159768.jpg

0 Replies

97 Views

Last post by CTLeonard
Thu Apr 11, 2024 9:20 am
1914 Coil Box (SOLD)

Last post by ClarenceWhite « Thu Apr 11, 2024 7:20 am
Replies: 5
by ThreePedalTapDancer » Wed Mar 27, 2024 5:12 pm

First post

Nice clean late 1913-1914 slant cover coil box. Excellent working condition. Very straight. Nice gloss black paint,no damage, some very minor light scuffs here and there, nothing serious. Original switch and brass cover. Has newer wood and wiring. Original firewall mounting bolts. New latches, installed but fastening tabs not bent over yet....

Last post

Lucky buyer, it is so neat and clean.

5 Replies

691 Views

Last post by ClarenceWhite
Thu Apr 11, 2024 7:20 am
Stewart Speedometer Gear

Last post by BobP « Wed Apr 10, 2024 8:58 pm

by BobP » Wed Apr 10, 2024 8:58 pm

For sale Stewart speedometer gears. Very good clean condition. Look at the pictures, the numbers are on them. $85 plus shipping. NO TEXTING. five07458677eight.

0 Replies

119 Views

Last post by BobP
Wed Apr 10, 2024 8:58 pm
For Sale: 1915 Runabout Tail Lamp Bracket

Last post by JTT3 « Wed Apr 10, 2024 5:34 pm
Replies: 2
by Andrew Brand » Mon Apr 08, 2024 1:59 am

First post

A very nice original tail lamp bracket. This is the style with a separate bolt in license plate bracket that I believe was used only in 1915 on runabouts and possibly coupelets. Its in excellent condition. See photos. Price $95 includes air mail postage to the USA. Payment by Paypal (friends and family option).

DSC_3431.JPG

DSC_3430.JPG...

Last post

——————————————-

2 Replies

488 Views

Last post by JTT3
Wed Apr 10, 2024 5:34 pm
WTB: door striker for my 1927 Touring

Last post by bmklawt « Wed Apr 10, 2024 4:09 pm
Replies: 1
by bmklawt » Wed Mar 15, 2023 9:29 pm

First post

Looking for a door striker

Last post

Still looking for the striker plate

1 Replies

367 Views

Last post by bmklawt
Wed Apr 10, 2024 4:09 pm
Taillight brackets fs

Last post by kmatt2 « Wed Apr 10, 2024 3:29 pm
Replies: 1
by CTLeonard » Wed Apr 10, 2024 10:38 am

First post

Have a 15-19 roadster bracket. 2 15-22 touring brackets and on IMG_20240410_093142951.jpg IMG_20240410_093131822.jpg IMG_20240410_093124096.jpg e I don't know bracket. 25.00 each plus shipping.

Last post

Mike, I would like to buy the touring tail light bracket, marked , 20 touring & sedan , in picture. I sent you a email threw MTFCA
Kevin

1 Replies

194 Views

Last post by kmatt2
Wed Apr 10, 2024 3:29 pm
15-16 upper windshield frame with hinges fs

Last post by CTLeonard « Wed Apr 10, 2024 2:26 pm

by CTLeonard » Wed Apr 10, 2024 2:26 pm

At least I believe it's 15-16 . Measures 39 x10 hinges work nice. Has three glass channels. 125.00 plus shipping. ctleonard64@gmail.com IMG_20240410_132206313.jpg IMG_20240410_132145965.jpg IMG_20240410_132120734.jpg

0 Replies

86 Views

Last post by CTLeonard
Wed Apr 10, 2024 2:26 pm
14 windshield frame fs

Last post by CTLeonard « Wed Apr 10, 2024 2:15 pm

by CTLeonard » Wed Apr 10, 2024 2:15 pm

Overall, a nice operable frame. Slight pitting in certain areas, nothing terrible. Folds nicely as should. Missing one brass glass channel. 175.00 plus shipping. ctleonard64@gmail.com IMG_20240410_130939787.jpg IMG_20240410_130919058.jpg IMG_20240410_130759223.jpg IMG_20240410_131017814.jpg

0 Replies

153 Views

Last post by CTLeonard
Wed Apr 10, 2024 2:15 pm
WTB, 26/coupe door striker plate.

Last post by Model T Matt « Wed Apr 10, 2024 11:43 am
Replies: 2
by Jmeredith » Tue Apr 09, 2024 3:57 pm

First post

Need for both doors and any hardware. Repros are ok.

Last post

Thanks Jesse

2 Replies

214 Views

Last post by Model T Matt
Wed Apr 10, 2024 11:43 am
FS accessory vesta spot light

Last post by Karl Von Neumann « Wed Apr 10, 2024 11:14 am
Replies: 4
by Karl Von Neumann » Thu Feb 22, 2024 2:18 pm

First post

Vesta spot light and mount needs restoration great for a patina car switch works but is crusty. $65 plus the ride

Last post

Price drop 55 plus the ride

4 Replies

834 Views

Last post by Karl Von Neumann
Wed Apr 10, 2024 11:14 am
High Volume Aluminum Intake Manifold - SOLD

Last post by Oldav8tor « Wed Apr 10, 2024 4:05 am
Replies: 2
by Oldav8tor » Tue Apr 09, 2024 6:58 pm

First post

Brand new - never installed. Shipped anywhere in the US for $150.
manifold.jpeg

Last post

Sale pending to RVA23T

2 Replies

485 Views

Last post by Oldav8tor
Wed Apr 10, 2024 4:05 am
F.S. Brass Boyco Runningboard Can Set

Last post by Stephen1915 « Wed Apr 10, 2024 12:20 am

by Stephen1915 » Wed Apr 10, 2024 12:20 am

Here is a set of never used, older reproduction Boyco cans, made of Brass! Carrier is missing the top that holds the cans in place by the caps. Easily made to your liking. The cans look as though they must be soldered and pressure tested before using. These are hard to find and no longer reproduced.

$500 obo. +Shipping

CALL DON’T EMAIL...

0 Replies

343 Views

Last post by Stephen1915
Wed Apr 10, 2024 12:20 am
For Sale: Thomas Timer Elevator

Last post by RajoRacer « Tue Apr 09, 2024 10:07 pm
Replies: 2
by RajoRacer » Mon Apr 08, 2024 1:09 pm

First post

Here's a complete timer elevator available - spark rod is included just didn't make the photo deadline ! $250.00 includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Last post

Found a new home - thanks MTFCA !

2 Replies

433 Views

Last post by RajoRacer
Tue Apr 09, 2024 10:07 pm
WTB - Juhasz carburetor

Last post by blauvelt « Tue Apr 09, 2024 2:20 pm
Replies: 2
by blauvelt » Tue Apr 09, 2024 10:12 am

First post

Hoping to find a Juhasz carburetor, any size 1 1/2 and smaller would be ideal. Have a selection of Miller and Master carbs that could be used for trading. Thank you!

Last post

A side draft would be neat! Fix a few design considerations. Did they make one? Either would be fine, have to build an intake manifold either way. Thank you.

Side or updraft

2 Replies

395 Views

Last post by blauvelt
Tue Apr 09, 2024 2:20 pm
WTB 26-27 Steering gear case

Last post by Karl Von Neumann « Tue Apr 09, 2024 2:07 pm
Replies: 1
by Tbird » Tue Apr 09, 2024 1:16 pm

First post

Looking for a 26-27 steering gear case. If you have the complete column that's fine too.
Thanks
Mike Bird

mikebird@lifeattheridge.net

Last post

I should have the gear case

1 Replies

177 Views

Last post by Karl Von Neumann
Tue Apr 09, 2024 2:07 pm
1911 Stewart speedometer road gear F/S

Last post by Layden Butler « Tue Apr 09, 2024 12:04 pm
Replies: 1
by Layden Butler » Fri Apr 05, 2024 3:14 pm

First post

Cast gear with block letter Stewart used in 1911, proper 60 teeth and 8 pitch, good teeth, does need straightening ( does not lay flat on the table). $95, domestic postage $10.

Last post

This is the original gear used on Model T Fords 1911 and 1912.

1 Replies

417 Views

Last post by Layden Butler
Tue Apr 09, 2024 12:04 pm
Looking for right rear fender for 1912/3 Metz any leads would be appreciated

Last post by JTT3 « Tue Apr 09, 2024 9:39 am
Replies: 2
by JTT3 » Mon Apr 08, 2024 10:22 pm

First post

Trying to help someone that needs the right rear fender for a 1912/13 model 22. Any leads would be great thanks John

Last post

Ain’t it the truth!

2 Replies

250 Views

Last post by JTT3
Tue Apr 09, 2024 9:39 am
FS Rubes horn

Last post by fordrelic « Tue Apr 09, 2024 8:16 am
Replies: 2
by fordrelic » Sat Mar 23, 2024 3:31 pm

First post

For Sale: Black Rubes horn.

$250 plus shipping.

rubes black.jpg rubes black 2.jpg

Last post

to the top

2 Replies

421 Views

Last post by fordrelic
Tue Apr 09, 2024 8:16 am
FS 1909 E&J Side Lamps Pat.1908 relisted

Last post by fordrelic « Tue Apr 09, 2024 8:14 am
Replies: 6
by fordrelic » Mon Feb 19, 2024 11:52 am

First post

For sale a pair of early E&J side lamps Pat. 1908
Used from 1909 to 1912.

Only pair I have ever found.
Condition is nice original with patina.

Price $400 plus shipping.

ej.jpg ej 2.jpg ej3.jpg ej4.jpg

Last post

to the top

6 Replies

839 Views

Last post by fordrelic
Tue Apr 09, 2024 8:14 am
FS Stewart Speedometer gear

Last post by fordrelic « Tue Apr 09, 2024 8:14 am
Replies: 7
by fordrelic » Sat Feb 17, 2024 9:32 am

First post

For Sale a Stewart speedometer gear. No 24, 9p, 64 T.

Clean it up and ready to go.

$70 includes shipping to lower 48.

speedo gear.jpg

Last post

to the top

7 Replies

995 Views

Last post by fordrelic
Tue Apr 09, 2024 8:14 am
FS 17-22 Coupe deck lid

Last post by fordrelic « Tue Apr 09, 2024 8:13 am
Replies: 3
by fordrelic » Sat Mar 09, 2024 7:58 am

First post

For sale a deck lid for a 1917-22 coupe.
Good condition.

$150 plus shipping

deck lid.jpg deck lid 2.jpg

Last post

to the top

3 Replies

415 Views

Last post by fordrelic
Tue Apr 09, 2024 8:13 am
High low gear and spacer

Last post by Ericgj85 « Mon Apr 08, 2024 10:21 pm
Replies: 3
by Ericgj85 » Mon Apr 08, 2024 1:35 pm

First post

I bought this set up from a member on here just to see how it works but have never used them. They are made for Closing up the ratio between low and high keeps the engine in its power band on the shift to high.Two parts are involved, a spacer and a driven gear with 29 teeth and flipping standard triple gears upside down . Along with this a new...

Last post

Sold second set

3 Replies

388 Views

Last post by Ericgj85
Mon Apr 08, 2024 10:21 pm
Rajo 4 valve copper head gasket

Last post by Ericgj85 « Mon Apr 08, 2024 7:46 pm
Replies: 5
by Ericgj85 » Mon Apr 08, 2024 1:20 pm

First post

I have a brand new solid copper head gasket for Rajo 4 valve.
$75 plus shipping

Last post

I bought them off of the forum can’t remember who though it’s been a while .

5 Replies

363 Views

Last post by Ericgj85
Mon Apr 08, 2024 7:46 pm
WTB usable carpet for 22 Center door

Last post by colonelpowers « Mon Apr 08, 2024 4:17 pm

by colonelpowers » Mon Apr 08, 2024 4:17 pm

Just thought I would see if anyone might have an old carpet for a 22 Center Door. My old car has pretty presentable upholstery but the carpet has almost gone to dust so I just thought that I would check. It doesn't need to be particularly nice, just not falling apart.

0 Replies

140 Views

Last post by colonelpowers
Mon Apr 08, 2024 4:17 pm

New Topic

19797 topics

Page 1 of 198
- Jump to page:
1
2
3
4
5
…
198
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum