Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45001 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
- 2 Replies
- 447 Views
-
Last post by John iaccino
Mon Jul 10, 2023 6:09 pm
-
-
Model a ahooga horn fs. Sold
Replies: 8
by
CTLeonard » Mon Apr 17, 2023 10:09 am
First post
Does work fine . 75.00 plus shipping. ctleonard64@gmail.com IMG_20230417_085713738.jpg IMG_20230417_085728483.jpg IMG_20230417_085705878.jpg
Last post
It arrived today
thanks
Scott
- 8 Replies
- 1281 Views
-
Last post by South park zephyr
Mon Jul 10, 2023 4:58 pm
-
-
FS-4" RUBBER HORN BULB AND REED
Replies: 1
by
John iaccino » Mon Jul 10, 2023 4:03 pm
First post
4 rubber horn bulb and reed in excellent condition. $35 plus flat rate shipping. USA only
Last post
Sold, pending funds.
- 1 Replies
- 374 Views
-
Last post by John iaccino
Mon Jul 10, 2023 4:37 pm
-
-
Parts for sale biuld a speedster sold
by
Nv Bob » Mon Jul 10, 2023 3:31 pm
4 dip pan
21 block with crank cam new valves adjustable lifters
18-25 trans ready to go new bushings where needed
26-7 frame
F & R springs
Steering column
Front end
Afew mics no rusty junk here
Was running speedster befor I took apart for stora
- 0 Replies
- 467 Views
-
Last post by Nv Bob
Mon Jul 10, 2023 3:31 pm
-
-
FS Wire Harness
Replies: 6
by
TRDxB2 » Fri Jun 02, 2023 4:36 pm
First post
Appears to be new but has some discoloring on some wires likely heat from soldering as the wires looks unused. Tested okay for continuity on all wires
Prefer PayPal to Family/Fiends
#4 T-5031 1919-25 Commutator wire harness, (7 wire), for cars with starter and some 26-27 trucks ------------ $37 shipping included
Last post
bump....................................
- 6 Replies
- 2686 Views
-
Last post by TRDxB2
Sun Jul 09, 2023 1:10 pm
-
-
FS Pair of 1926-27 Rear Wire Wheel Hubs with Drums
Replies: 5
by
TRDxB2 » Fri May 06, 2022 12:08 am
First post
Glad to answer questions and add pictures if needed. now $350 shipping included to the 48. A
This is link to all the other items I have for sale
Last post
up bump....................
- 5 Replies
- 1664 Views
-
Last post by TRDxB2
Sun Jul 09, 2023 1:07 pm
-
-
FS Original Used Headlight Rims - for H lens
Replies: 2
by
TRDxB2 » Sun Jun 11, 2023 9:18 pm
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
I'm planning to sell Macbeth Lens, other H style patina rims (Nickle & Nickle now Brass) and other items so may pay to start a box to save on shipping
This is link to all the other items I have for sale
Each rim is Ford scripted, steel,...
Last post
bump........................................
- 2 Replies
- 507 Views
-
Last post by TRDxB2
Sun Jul 09, 2023 1:02 pm
-
-
FS Used Headlamp Rims lost the Nickel now Brass
Replies: 1
by
TRDxB2 » Sun Jun 11, 2023 10:40 pm
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
I'm planning to sell Macbeth Lens, other H style patina rims and other items so may pay to start a box to save on shipping
Each rim is Ford scripted, brass, will have minor dents, good clips for lenses. These were all originally Nickel...
Last post
bump.........................
- 1 Replies
- 459 Views
-
Last post by TRDxB2
Sun Jul 09, 2023 1:01 pm
-
-
FS USED Nickel Headlight Rims
Replies: 4
by
TRDxB2 » Sun Jun 11, 2023 9:58 pm
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
Please understand that these rims may have some brass showing through the nickle but have a great patina to match a Driver T not a shiny bodied one.
I'm planning to sell Macbeth Lens, other H style patina rims (Nickle & Nickle now Brass)...
Last post
Bump....................
- 4 Replies
- 709 Views
-
Last post by TRDxB2
Sun Jul 09, 2023 1:00 pm
-
-
FS. 1913-1914 Kingston Y Carb $100
Replies: 2
by
Stephen1915 » Wed Jul 05, 2023 5:08 pm
First post
1913-1914 Kingston Model Y Carburetor Core.
Complete. Float valve surprisingly still works well. Will need the usual rebuilding. Good Core. More photos at request.
$100 + Shipping
Call or Text
314-287-1901
Last post
I’ll take it
- 2 Replies
- 540 Views
-
Last post by JTT3
Sat Jul 08, 2023 1:06 pm
-
-
SOLD N.O.S. Model TT Running Boards MAKE OFFER
Replies: 5
by
Stephen1915 » Wed Jul 05, 2023 4:14 pm
First post
If you are restoring a nice TT truck, these boards are for you! These are in exceptional unused condition, still retaining the original Ford applied paint. No dents, bends, or rust pitting.
These are NOT being Reproduced.
$350 + Shipping
Call or Text
314-287-1901
Last post
Stephen, PM Sent
Private message sent. Please call. Thanks
- 5 Replies
- 755 Views
-
Last post by Stephen1915
Fri Jul 07, 2023 9:20 pm
-
-
FOR SALE - FILLOMETER GAS GAUGE/FILLER WITHOUT LIFTING THE SEAT CUSHION, NOS!
Replies: 2
by
Jay In Northern Ca. » Fri Jul 07, 2023 6:23 pm
First post
This new old stock Gas Gauge/filler allows you to fill your gas tank without lifting the seat, AND has a built in gas gauge. To read the gauge you flip the filler door up and check the needle position right from the seat! Asking $145 plus postage.
fillo 2.jpg fillo 3.jpg fllo gauge face and needle.jpg fillo badge.jpg
Please reply to the email...
Last post
Let me know what shipping is. Email sent.
- 2 Replies
- 527 Views
-
Last post by Michael Peternell
Fri Jul 07, 2023 8:36 pm
-
-
FOR SALE- 3 ZENITH IN LINE FUEL FILTERS
by
Jay In Northern Ca. » Fri Jul 07, 2023 7:39 pm
These are in great shape and will look period correct under the hood. The bodies are cast iron, not problematic pot metal! Selling as a lot. Asking $75'.............. SOLD!
Zenith In Line Feul Filters.jpg
Please reply to the email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg
- 0 Replies
- 422 Views
-
Last post by Jay In Northern Ca.
Fri Jul 07, 2023 7:39 pm
-
-
FOR SALE - SHORT PROOF ARMORED WIPER TIMER & BRUSH NEW OLD STOCK Pat'd 1916
Replies: 2
by
Jay In Northern Ca. » Thu Jul 06, 2023 8:05 pm
First post
This is a brand new never used original brush timer and brush ready to install on your T.
Asking $75 plus postage.
Short Proof front.jpg Short Proof back.jpg
Please reply to the email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg
Last post
Jay, I have one just like that. Does the armoured wiring indicate that this one is for an improved car with the coilbox on the motor?
Allan from down under.
- 2 Replies
- 521 Views
-
Last post by Allan
Fri Jul 07, 2023 6:17 am
-
-
Apco oil level indicators
Replies: 3
by
Allan » Tue Jul 04, 2023 7:51 am
First post
One sale for two did not go ahead so I have them for sale.
$80 each, posted to your door.
Allan from down under. 20230522_122748.jpg
Last post
Last one on hold, pending payment.
Allan from down under.
- 3 Replies
- 754 Views
-
Last post by Allan
Thu Jul 06, 2023 11:35 pm
-
-
SOLD! - 5.25 INCH DIAMETER WINDSHIELD MOUNT SIDE VIEW MIRROR
Replies: 1
by
Jay In Northern Ca. » Thu Jul 06, 2023 8:14 pm
First post
Barn fresh. Comes with a new beveled mirror to install. Back of mirror has some rust. Bezel is removable by undoing a screw that holds it in place seen at the top in the second photo. Asking $55 plus postage. Mirror 5.25 inches front.jpg Mirror 5.25 inches back.jpg Mirror 5.25 inches back 2.jpg Mirror 5.25 inches front with new mirror.jpg
email...
Last post
I’ll take it
Scott
- 1 Replies
- 419 Views
-
Last post by South park zephyr
Thu Jul 06, 2023 9:04 pm
-
-
SALE - 1909 MODEL T. FORD LONGINES SYMPHONETTE STERLING SILVER ART MEDAL
by
Jay In Northern Ca. » Thu Jul 06, 2023 9:02 pm
In excellent condition. It's solid sterling Silver and Measures 40mm in diameter and weighs 33.4 grams. The edge of the coin is marked with the serial number 2589. Asking $45 plus postage.
1909 MODEL T. FORD LONGINES SYMPHONETTE STERLING SILVER COIN 2.jpg 1909 MODEL T. FORD LONGINES SYMPHONETTE STERLING SILVER COIN 1.jpg
email address below and...
- 0 Replies
- 477 Views
-
Last post by Jay In Northern Ca.
Thu Jul 06, 2023 9:02 pm
-
-
FS Aluminum Warford Transmission (SOLD )
Replies: 4
by
ThreePedalTapDancer » Sat Jun 17, 2023 7:13 pm
First post
Original aluminum Warford transmission. Nice clean used condition. Gears look nice, no missing teeth, just usual some engagement/grind wear on some of the small gear teeth leading edges. Everything spins smoothly and engages good. The shifter is crisp and works as it should. 750.00 plus shipping. The aluminum case is solid, no weld repairs, just...
Last post
Arrived yesterday, Thank you for the great care in packaging it.
Scott
Dang, I was hoping it was back for sale!!!
- 4 Replies
- 797 Views
-
Last post by RVA23T
Thu Jul 06, 2023 5:05 pm
-
-
WTB 24 Tailight
Replies: 13
by
Art Ebeling » Tue Jul 04, 2023 2:43 pm
First post
Want to buy a tailight for a 24 Touring. Art
Last post
Yes, that is what I am saying.
- 13 Replies
- 778 Views
-
Last post by Humblej
Thu Jul 06, 2023 3:07 pm
-
-
WTB cam
by
Bill Anziani » Wed Jul 05, 2023 11:04 pm
Looking to buy a 280 lift stripe cam for 24 block
- 0 Replies
- 329 Views
-
Last post by Bill Anziani
Wed Jul 05, 2023 11:04 pm
-
-
WTB: Steering Shaft
Replies: 8
by
Scott C. » Mon Jul 03, 2023 10:05 pm
First post
I am needing a good steering column shaft for my 26 Coupe. The vendors are all out of stock. Does anyone have a new one lying around or, a good used one that you are willing to sell? Or even a complete steering column with a good shaft.
Last post
The earlier steering bracket is quite a bit different in design.
- 8 Replies
- 738 Views
-
Last post by RajoRacer
Wed Jul 05, 2023 10:47 pm
-
-
Early Firewall Brackets- SOLD
Replies: 2
by
Tbird » Tue Jul 04, 2023 7:43 pm
First post
Sandblasted and primed
$60 plus shipping
mikebird@lifeattheridge.net or
Five Seven Four 5 eight 4 6 seven four four
01FEA0D0-0CE0-4DA7-9C3F-062DFFED1985.jpeg
D9EFD633-5D03-4B45-8C48-51FE0F792747.jpeg
Last post
I sent you an email Phillip. Thanks
- 2 Replies
- 423 Views
-
Last post by Tbird
Wed Jul 05, 2023 9:07 pm
-
-
FS Brass Accessory Water Pump (SOLD pending)
Replies: 1
by
ThreePedalTapDancer » Sun Jun 25, 2023 7:59 pm
First post
Brass accessory water pump. Replaces top radiator outlet on head. Appears to be unused or used very little, shaft is nice and snug with smooth movement. Will polish up like gold. Heavy cast brass casting. A really neat pump. 150.00 includes shipping.
IMG_8280.jpeg
Last post
Hi; I'll take the water pump, Please e-mail me with your address so I can send payment, Thanks
- 1 Replies
- 644 Views
-
Last post by Rich Retka
Wed Jul 05, 2023 6:21 pm
-
-
- 0 Replies
- 332 Views
-
Last post by Stephen1915
Wed Jul 05, 2023 5:23 pm
-
-
Early brass parts-Motometer,governor,carbs
Replies: 10
by
BlueJay » Thu Oct 10, 2019 10:49 pm
First post
6BC51026-43DD-4E3B-91E1-DAD7AF3D043F.jpeg F56E3B8E-C815-4A2F-A8C4-B5731B4673BB.jpeg 53DF725B-39C2-4663-AC5B-74624F534761.jpeg 99FF7D6A-0A0A-414F-8B12-CC2E383EBFD1.jpeg AE37A970-4E55-4806-93F9-F94A0955233F.jpeg
Items from my husbands garage so I’m not the expert. Please email if interested. I have been unable to assess value. Thx, Debbie
Last post
Taylorgodiva28 is most likely an AI bot since their profile is short and vague. Plus this is their one and only post to date.
They're bombarding the forum.
Yep! Back to my soap box! :lol: :evil: This AI crap is gonna get worse and worse. There's another AI post about the passing of poor ol Bud DeLong a long time ago! Ridiculous.
- 10 Replies
- 3746 Views
-
Last post by TWrenn
Wed Jul 05, 2023 2:50 pm
-
-
FS-Rear Block Spacer for A Crank Conversion in a T block
by
Dan McEachern » Wed Jul 05, 2023 2:27 pm
For Sale- rear block spacer used when installing a Model A crankshaft with an unshortened rear main bearing. This spacer is used when
moving the block forward on the crankcase, allowing the transmission cover to seal on the spacer. Moving the block ahead makes in unnecessary to shorten the rear main journal.
Machined from aluminum plate- not a...
- 0 Replies
- 382 Views
-
Last post by Dan McEachern
Wed Jul 05, 2023 2:27 pm
-
-
- 2 Replies
- 617 Views
-
Last post by South park zephyr
Wed Jul 05, 2023 8:09 am
-
-
- 1 Replies
- 408 Views
-
Last post by Phoenix88R
Tue Jul 04, 2023 11:13 pm
-
-
Stewart L Bracket - SOLD
Replies: 1
by
Tbird » Tue Jul 04, 2023 7:47 pm
First post
Stewart L bracket and nut- original
Sandblasted and primed
$7 plus shipping
milebird@lifeattheridge.net or
Five Seven Four 5 eight 4 6 seven four four
82BC14BA-22B0-4681-A459-71B50C9E35F9.jpeg
F6CB76B1-409E-4DAC-A0DE-B290F9D6F558.jpeg
Last post
Email sent
- 1 Replies
- 294 Views
-
Last post by Grntea
Tue Jul 04, 2023 8:54 pm
-
-
WTB… pair 09-10 2 hole front body brackets
Replies: 3
by
Larry Debaugh » Tue Jul 04, 2023 1:07 pm
First post
I’m looking for a pair of 09-10 2 hole front body brackets, the ones bolted to the body by the floor boards . Larry Debaugh
Last post
Thanks for sending the information, I think the one pictured is the frame bracket that gets riveted to the frame…. I’ll post a picture tomorrow… the C/C 2 mounting holes are too close. Larry
- 3 Replies
- 446 Views
-
Last post by Larry Debaugh
Tue Jul 04, 2023 6:37 pm
-
-
Compression pressure
by
Dennis_Brown » Tue Jul 04, 2023 11:13 am
Tried to take compression pressure with this NIEHOFF compression gauge. Got to 25 lbs on first stroke hand cranking it ( no starter) but my daughter could not hold it tight enough for the second or third stroke and it would blow by the rubber tip. This is DRY pressure. Has not been run in over 50 years. Tried #1 & 2 cylinders and stopped. Will...
- 0 Replies
- 391 Views
-
Last post by Dennis_Brown
Tue Jul 04, 2023 11:13 am
-
-
1911 steering column housing
by
Scott Rosenthal » Mon Jul 03, 2023 6:29 pm
WTB Restorable 1911 standard steering column housing. Has0 4 round symetric dash mounting holes, not square holes. Prefer just the housing, but will purchase other steering parts if required. Scott 513 three seven eight 4235. :idea:
- 0 Replies
- 404 Views
-
Last post by Scott Rosenthal
Mon Jul 03, 2023 6:29 pm
-
-
- 0 Replies
- 373 Views
-
Last post by AdminJeff
Mon Jul 03, 2023 2:36 pm
-
-
STEWART WARNER 16 TOOTH SPEEDOMETER DRIVE GEAR #2301
by
AdminJeff » Mon Jul 03, 2023 1:40 pm
Stewart 2301 perfect reproduction gear made out of ABS plastic. Strong like a fiber gear but with enough give to deal with
small rocks that might be thrown up from the road.
According to Russ Furstnow's excellent speedometer book, the 2301 was used on:
Ford 1912-1926 Model T passenger cars (with swivel joint drive)
Buick 1918-1919 Big Six; 1922...
- 0 Replies
- 311 Views
-
Last post by AdminJeff
Mon Jul 03, 2023 1:40 pm
-
-
For Sale model t 12 volt alternator
Replies: 1
by
frontyboy » Sun Jun 11, 2023 5:04 pm
First post
Removed from an engine that had never been run since rebuilt. Its a Hitachi alternator, all set up for a T motor. I'd use it in my '14 but no mounting for a generator. $125.00 plus shipping.
frontyboy text or call 2oh6-919-1949(Seattle)
Last post
Hi Dick,
I still need your address to send a check. Thanks.
Craig.
- 1 Replies
- 521 Views
-
Last post by Craig Leach
Mon Jul 03, 2023 1:11 pm
-
-
Jno brown taillight 115 fs. Sold
Replies: 1
by
CTLeonard » Fri Jun 16, 2023 11:32 am
First post
Jnobrown 115 taillight fs. Has the clear, red and blue lenses. Top is beat pretty good. Has a door hinge broken off. Has a hole drilled in the back corner. Has burner and wheel attached.75.00 plus shipping. ctleonard64@gmail.com IMG_20230616_101603788.jpg IMG_20230616_101557822.jpg IMG_20230616_101456890.jpg IMG_20230616_102527266.jpg...
Last post
Xxxxxxxxxxx
- 1 Replies
- 428 Views
-
Last post by CTLeonard
Mon Jul 03, 2023 8:49 am
-
-
Stevens Reamer/Tap FS
Replies: 10
by
Dan Hatch » Fri Jun 09, 2023 3:09 am
First post
Here is a one of my Reamer/Taps that was an odd one. By odd I mean it is an extra one from a batch. When a run of these made an extra few are made in case there is a screw up. I have to take them all. So I ended up with this extra one. $220 + shipping. Email me at address in pictures. Thanks Dan
IMG_0094.jpeg
image0.jpeg
Last post
Sold pending payment
- 10 Replies
- 1110 Views
-
Last post by Dan Hatch
Mon Jul 03, 2023 7:41 am
-
-
Model T Marine or Stand Alone Powerplant Crankcase
Replies: 12
by
Scott Gilham » Sat Jun 24, 2023 9:58 pm
First post
I came across this today. Barn fresh and oily dusty. I really don't know the actual purpose for this other than what I listed in the title. I bought it from a T'ers barn with a lot of other parts. I'll start at $200.00.
Last post
Sold
Thanks Mitch
Thanks MTFCA
- 12 Replies
- 1525 Views
-
Last post by Scott Gilham
Sun Jul 02, 2023 11:47 pm
-
-
26-27 wire wheels and hubs
Replies: 2
by
Plankhill » Sat Jul 01, 2023 3:12 pm
First post
I will have at Iola space E-1. A set of wire wheels and hubs. Hub set and 5 wheels. Also parts manuals, restored 26-27 coil box, 21=25 battery horns, and much more.
Last post
Brendan
Sent you a email
Rick S.
- 2 Replies
- 644 Views
-
Last post by Mighty1924
Sun Jul 02, 2023 7:42 pm
-
-
FS: lot of misc accessory distributor pieces
Replies: 2
by
Linus Tremaine » Sun Jul 02, 2023 4:23 pm
First post
Here is a mess of mostly incomplete accessory distributor pieces. Many of the castings are pot metal and are broken but there is lots of good hardware. There is a Bosch unit that looks ok there’s another older Bosch that looks salvageable. Many drive gears as seen in photos. Take a look and see if you can use it.
100 dollars or best offer plus...
Last post
Sold pending payment
- 2 Replies
- 433 Views
-
Last post by Linus Tremaine
Sun Jul 02, 2023 5:41 pm
-
-
Inclinometer grade meter F/S
by
Layden Butler » Sun Jul 02, 2023 3:41 pm
Fun piece for your Model T! Tell on sight how steep the grade is. Made of cast aluminum so could be stripped of the black paint if desired. Works great. $95 including domestic postage.
- 0 Replies
- 449 Views
-
Last post by Layden Butler
Sun Jul 02, 2023 3:41 pm
-
-
- 0 Replies
- 375 Views
-
Last post by Layden Butler
Sun Jul 02, 2023 3:35 pm
-
-
Brass era Schrader tire tube stem covers SOLD
Replies: 5
by
Layden Butler » Tue May 23, 2023 5:12 pm
First post
Set of Schrader brass era tire tube stem covers with proper solid not stamped rim nuts for brass era Model T Fords, Original nickel plating over solid brass that you can strip to bare brass if you prefer!
Last post
Thanks Layden, good detailed information. Mike
- 5 Replies
- 804 Views
-
Last post by Mike Lebsack-Iowa
Sun Jul 02, 2023 2:38 pm
-
-
townsend aluminum connecting rods
Replies: 3
by
Gene_French » Wed Mar 22, 2023 9:56 am
First post
for sale : set of Townsend auto. cast aluminum connecting rods ... these are designed for use in fitting Model A crankshaft into Model T motor block ... the machining instructions are included ... machining will require lathe and milling machine work ... price is $150 + $17.10 flat rate postage in lower 48 states ... actual postage outside this...
Last post
to the top again ...thanks MTFCA
- 3 Replies
- 1195 Views
-
Last post by Gene_French
Sun Jul 02, 2023 10:12 am
-
-
linebore "Lite "
Replies: 1
by
Gene_French » Sun Jan 08, 2023 10:32 am
First post
this unit has many of the same features of my Standard linebore unit except that it fits model T block only ... includes locator brackets and false cam and front adapter bushing , dail indicator toolset ,4 bearing linebore frame and boring bar , boring bit and radius/facing bit and instructions ... price is $850 plus $75 postage in lower 48 states...
Last post
to the top again ...thanks MTFCA
- 1 Replies
- 596 Views
-
Last post by Gene_French
Sun Jul 02, 2023 10:06 am
-
-
WTB Rudge Wire Wheels
by
Tea_time_racer » Sun Jul 02, 2023 1:00 am
Looking for Rudge wire wheels for Model T. Interested in full wheels or center shells and hubs. One part or a full set. I am trying to put together a set.
- 0 Replies
- 333 Views
-
Last post by Tea_time_racer
Sun Jul 02, 2023 1:00 am
-
-
Spare tire mount question
Replies: 2
by
Reno Speedster » Sat Jul 01, 2023 10:00 pm
First post
Thanks Allan, sorry I put this on the wrong forum. It’s getting to be a bad habit!
Last post
Carriage bolt hole is for the stock Ford tail lamp and as Allan eluded to, license plate slots.
- 2 Replies
- 356 Views
-
Last post by RajoRacer
Sat Jul 01, 2023 10:12 pm
-
-
Early front motor mount F/S
Replies: 1
by
Layden Butler » Fri May 19, 2023 9:20 pm
First post
Early front motor mount with cap, very light rust no pits. $35 includes domestic postage.
Last post
$27 for a holiday special!!!
- 1 Replies
- 550 Views
-
Last post by Layden Butler
Sat Jul 01, 2023 7:50 pm
-
-
Spiral wound rear axle roller bearings F/S
Replies: 1
by
Layden Butler » Tue May 30, 2023 5:56 pm
First post
USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002 wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford, all are the original style spiral wound...
Last post
Happy buyers so far! I would like to clear out the remaining so 10% off!
- 1 Replies
- 597 Views
-
Last post by Layden Butler
Sat Jul 01, 2023 7:48 pm
-
-
WTB good or rebuildable large drum Ruckstell
Replies: 1
by
Tim D » Sat Jul 01, 2023 3:31 pm
First post
Looking for a large drum Ruckstell close to South central Wisconsin.
Last post
Tim I have one and not sure if I want to sell. If I did
I’m not sure what it is worth. I live in Lancaster Wi
U might say I’m on the fence. I also have a small one
- 1 Replies
- 328 Views
-
Last post by Bob Broihahn-S.W. Wi
Sat Jul 01, 2023 5:39 pm
-
-
Dodge bros. Cast spider fs. Sold
Replies: 1
by
CTLeonard » Tue Apr 18, 2023 2:07 pm
First post
Double keyed dodge bros. 12 1/4 cast spider. Not all pitted up. 35.00 plus shipping. ctleonard64@gmail.com IMG_20230418_130252566.jpg IMG_20230418_130230779.jpg IMG_20230418_130235346.jpg IMG_20230418_130212746.jpg
Last post
Sorry, the add is marked sold
- 1 Replies
- 700 Views
-
Last post by CTLeonard
Sat Jul 01, 2023 4:11 pm
-
-
- 0 Replies
- 265 Views
-
Last post by GGZ
Sat Jul 01, 2023 3:44 pm
-
-
K R Wilson Model A Bearing Tools
by
Plankhill » Sat Jul 01, 2023 3:25 pm
I will have at Iola space E-1. K R Wilson pouring frame, boring frame, false cam, rear main facing tool, and bed plate for combo. machine. Thurs. and Friday only.
- 0 Replies
- 322 Views
-
Last post by Plankhill
Sat Jul 01, 2023 3:25 pm
-
-
Twin Hasslers Pkus
by
Plankhill » Sat Jul 01, 2023 3:19 pm
I will have at Iola space E-1. A set of twin Hasslers in need of restoration, Needle nose pans, 17- 25 Touring doors with good wood. Restored 20-25 headlights, set of Tractor Unit coils, low head, a big pile of $1 items, and much more. Thurs. and Friday only.
- 0 Replies
- 361 Views
-
Last post by Plankhill
Sat Jul 01, 2023 3:19 pm
-
-
Racing Spindles Plus
by
Plankhill » Sat Jul 01, 2023 3:06 pm
Will have at Iola space E-1. Offset racing spindles, other spindles,wishbones, tie rods, drag links, plus other stuff. Thursday and Friday only.
- 0 Replies
- 382 Views
-
Last post by Plankhill
Sat Jul 01, 2023 3:06 pm
-
-
FS: New 2564E Clevis Pins
Replies: 4
by
TrentB » Fri Jun 30, 2023 7:43 pm
First post
FS: New production early style clevis pins with the correct domed head for 1909-1913 Model T Fords, T-2564E. These are available in standard (5/16) and 1/64 oversize (21/64). 5 used per car: 4 brake rod clevis and 1 clutch shift clevis pin. $2.25 each or 5 for $10 plus $9.55 shipping.
CAFB926F-076A-48DA-B01F-743E2E6ED9FB.jpeg...
Last post
Email for 2 sets sent Trent. Thanks.
And maybe these will help stop all the frigging rattling of brake rods especially with the RM's!! Drives me nuts.
- 4 Replies
- 500 Views
-
Last post by TWrenn
Sat Jul 01, 2023 2:13 pm
-
-
WTB fender brackets for 1925 PU bed
Replies: 1
by
fordrelic » Sat Jul 01, 2023 9:42 am
First post
I need fender brackets for 1925 pickup bed.
I need both pieces including piece that mounts to bed.
Is the piece that mounts to bed reproduced?
Thanks,
Fordrelic
Last post
Gator Gould was making them. The flanges are used in other areas on late T's.
- 1 Replies
- 273 Views
-
Last post by Original Smith
Sat Jul 01, 2023 11:21 am
-
-
12 Ford Script Keys
Replies: 1
by
fordrelic » Thu Jun 15, 2023 8:17 am
First post
I have these numbers;
52, 54, 57,60,61,62,65,66,68,71,72,73.
12 keys $95 includes priority shipping to lower 48.
Thanks,
Fordrelic
Last post
Still available.
- 1 Replies
- 431 Views
-
Last post by fordrelic
Sat Jul 01, 2023 9:38 am
-
-
WTB 1914 Hood
Replies: 1
by
25tfire » Fri Jun 02, 2023 1:16 pm
First post
WTB a 1914 Alum Hood in good condition. Jim
Last post
Still looking for one.
- 1 Replies
- 383 Views
-
Last post by 25tfire
Sat Jul 01, 2023 9:21 am
-
-
SOLD: 1911-1914 Left Side Headlamp Fork
Replies: 1
by
GGZ » Thu Jun 15, 2023 2:49 pm
First post
SOLD to Larry in Wisconsin.
Here is a good, original LEFT SIDE headlamp fork for a 1911-1914 Model T. Nice condition. The price is 60.00 including shipping within the USA.
Call me at 734-730-4274 or email directly at: motoringicons@hotmail.com
Thanks.
Last post
Hello GGZ: I need some parts too. Are your parts compatible with model X and Y?
😂😂😂😂😂😂😂😂😂😂😂
- 1 Replies
- 456 Views
-
Last post by Tourabout
Sat Jul 01, 2023 9:04 am
-
-
Model T bike rack for sale
Replies: 3
by
colonelpowers » Sun Jun 25, 2023 6:56 pm
First post
I collect antique bikes and picked this up a while ago. I don't know anything about them apart from that they came off of a wooden rimmed safety bicycle so they period correct for a T. Let me explain how they work so that you can picture it. As they are laying in the photos, the left mounts to the front bicycle axle, the angled portion at the top...
Last post
Well, I'd say that would be a more difficult fit but with careful application of a few rolls of duct tape it might just work.
- 3 Replies
- 900 Views
-
Last post by colonelpowers
Fri Jun 30, 2023 10:20 pm
-
-
Tobin Arp Mike FS
Replies: 25
by
Dan Hatch » Sun Mar 26, 2023 11:17 am
First post
Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg
Last post
Back to the top
- 25 Replies
- 2862 Views
-
Last post by Dan Hatch
Fri Jun 30, 2023 9:22 pm
-
-
FOR SALE - STRONG SITE FEED OIL PUMP OILER FOR FORDS NEW OLD STOCK WITH THE ORIGINAL BOX
Replies: 9
by
Jay In Northern Ca. » Sat Mar 18, 2023 4:05 pm
First post
There is enough parts here for one setup plus three other extra pump plates. the plain glass tube on the sump site gauge will need to be replaced. Original instructions are photo copies. Asking $120 plus postage.
Strong 1.jpg Strong 2.jpg Strong 3.jpg Strong 4.jpg
email address below and NOT the personal messaging system to contact me, Thanks!...
Last post
It's a scam I brought this months ago .
- 9 Replies
- 1379 Views
-
Last post by Model T Tom
Fri Jun 30, 2023 9:40 am
-
-
FS used tires
Replies: 4
by
Bill Anziani » Thu Jun 29, 2023 6:47 am
First post
I have two black Firestone's. They have some tread left. Make excellent shop tires $150.00 plus shipping. Can text pictures
Last post
Tires are sold and paid for. Thanks for the interest
- 4 Replies
- 707 Views
-
Last post by Bill Anziani
Thu Jun 29, 2023 11:25 pm
-
-
Model T Parts Swap Meet Long Beach
by
SurfCityGene » Thu Jun 29, 2023 4:06 pm
The Long Beach Vintage and Classic Parts Exchange is less than a month away. Saturday July 15 at Long Beach City College Veteran's Stadium 5000 Lew Davis St. Long Beach, CA. 90808. 7AM until it's over. Admission $5, Free Parking. For 69 years, one of the oldest and best old car and old Ford swap meets in the West. Open to all makes and models,...
- 0 Replies
- 306 Views
-
Last post by SurfCityGene
Thu Jun 29, 2023 4:06 pm
-
-
Model T snowmobile flyer FS
by
Nv Bob » Thu Jun 29, 2023 3:09 pm
1918 TT SET UP WITH ORGINAL SNOW FLYER SETUP
Mechanicals all rebiult runs drives great year round mud snow and pavement
Contact me for details
Could list in cars for sale
Asking 15.500 locate Sparks Nv
Jalopyt@yahoo.com
- 0 Replies
- 419 Views
-
Last post by Nv Bob
Thu Jun 29, 2023 3:09 pm
-
-
SOLD: "Motoring and Boating" Magazine 1904 and 1905 Issues
by
GGZ » Thu Jun 29, 2023 2:55 pm
SOLD to Phillip! That was fast!!!!!
Here are four, original issues of the Motoring and Boating magazines. These are about 11 by 9 and have about 40 pages in each issue. They are dated September 1904, November 1904, January 1905 and February 1905 and are in very good condition. This magazine was published in New York. The contents contain lots of...
- 0 Replies
- 244 Views
-
Last post by GGZ
Thu Jun 29, 2023 2:55 pm
-
-
ACCESSORY STEERIN GEAR
Replies: 5
by
Liberty Garage » Fri Jun 16, 2023 10:11 pm
First post
Model T accessory steering gear. Mounts in the same position as the original steering mount. $400 + ship
Last post
Might be somewhat like this T accessory steering gear?, seems very similar. But didn’t see the T spark and throttle rod guides in that casting like this one has.
Image 6-28-22 at 10.43 AM.jpeg
- 5 Replies
- 1356 Views
-
Last post by DanTreace
Thu Jun 29, 2023 2:35 pm
-
-
FS Torpedo Firewall
Replies: 5
by
TRDxB2 » Thu Oct 27, 2022 1:01 am
First post
Selling for a friend - PayPal to Family/Friends preferred - check takes longer
This is link to all the other items I have for sale
1910 - 11 Torpedo Fire wall with windshield riser (28-3/8 x 20-1/4 ) - riser has been lightly stained see pictures $150 + shipping
IMG_4319.JPG
IMG_4321.JPG
dimensions.jpg
Last post
firewall still available.
- 5 Replies
- 1518 Views
-
Last post by TRDxB2
Thu Jun 29, 2023 10:40 am
-
-
FS Clamert Round Lenses for Electric Headlights
Replies: 1
by
TRDxB2 » Mon Jun 12, 2023 12:58 am
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
I'm planning to sell Macbeth Lens, other H style patina rims (Nickle & Nickle now Brass) and other items so may pay to start a box to save on shipping.
Lenses are 8-1/8 The lens are intended to focus the light
Clamert lenses $65 for the...
Last post
Bump............
- 1 Replies
- 539 Views
-
Last post by TRDxB2
Thu Jun 29, 2023 10:32 am
-
-
FS 1927 Model T Tudor
Replies: 1
by
PaintDude4723 » Thu Jun 29, 2023 8:34 am
First post
1927 T Tudor has older restoration still in good shape. New roof ,new battery, new tune up. All glass is great and works as it should. Starts and drives great. $10500.
Last post
E-Mail sent.
- 1 Replies
- 450 Views
-
Last post by Bill Everett
Thu Jun 29, 2023 9:25 am
-
-
WANTED, Top Material.
Replies: 1
by
Pep C Strebeck » Wed Jun 28, 2023 10:21 pm
First post
I am hoping to find a short end or leftover piece of Top Material, a piece 3' x 2' at least. I am just trying to finish out a small project and I am hoping that someone might have a piece laying about, new or used is fine. Please let me know what you might have. Please contact me with a Private Message here on the Forum, Thank you for looking, Joe.
Last post
I had the same need for a top modification. Contacted Mike @ Classtic. He sold me a few feet.
- 1 Replies
- 335 Views
-
Last post by speedytinc
Thu Jun 29, 2023 8:02 am
-
-
WTB: 30X3.5 Rims
Replies: 20
by
Scott C. » Sun Jun 18, 2023 1:24 am
First post
After fighting with the new reproduction rims that I bought for my 25 RPU, I am thinking that I need to go with original rims. I would like to buy some good Hayes, or Ford style 30 x3.5 rims.
Last post
I have driven it around a bit and the rims seem to be working fine. I finally heard back from Steve and he is in the process of making me a replacement for the one that does not fit.
I noticed that I have some spokes that are getting loose. I think I might need to find a set of wheels and rebuild them.
- 20 Replies
- 1372 Views
-
Last post by Scott C.
Thu Jun 29, 2023 1:25 am
-
-
- 0 Replies
- 328 Views
-
Last post by got10carz
Wed Jun 28, 2023 8:55 pm
-
-
- 19 Replies
- 5196 Views
-
Last post by Lemperesg
Wed Jun 28, 2023 6:51 pm
-
-
FS Scandinavia Bands -NOS brown original ALL SOLD
Replies: 7
by
TRDxB2 » Mon Jun 19, 2023 1:14 am
First post
I have one complete set of NOS linings for a 26-27 transmission (1 wide brake band & 2 narrow bands plus the brass rivets) $100 shipping included to US NA. SOLD
Also a package of just 2 narrow NOS bands $57 shipping included SOLD
Prefer PayPal to Family Friends - check takes longer
--
--
26-27 bands SOLD
IMG_4924.JPG
IMG_4927.JPG
--
--...
Last post
Payment sent via PayPal.
Thanks!
- 7 Replies
- 1070 Views
-
Last post by DaveBarker
Wed Jun 28, 2023 2:14 pm
-
-
F & F Oiler (trans cover plate)
by
Rich Eagle » Wed Jun 28, 2023 1:56 pm
They made several types of these but I haven't seen this one before. It is cast aluminum I believe.
FFoiler1.jpg
A threaded piece will have to be removed from the elbow or elbow removed.
FFoiler2.jpg
FFoiler3.jpg
FFoiler4.jpg
$55 plus shipping.
joyful.jpg
- 0 Replies
- 362 Views
-
Last post by Rich Eagle
Wed Jun 28, 2023 1:56 pm
-
-
Floormat fs. Sold
by
CTLeonard » Wed Jun 28, 2023 1:24 pm
:? Have a new black floormat fs. Measures 27 5/8 tall, 36 across the bottom. 28.00 plus shipping. ctleonard64@gmail.com IMG_20230628_121805292.jpg IMG_20230628_121825340.jpg IMG_20230628_121815839.jpg
- 0 Replies
- 353 Views
-
Last post by CTLeonard
Wed Jun 28, 2023 1:24 pm
-
-
For Sale: 1925 coupe rear fenders
Replies: 6
by
Grntea » Mon May 22, 2023 12:38 pm
First post
I have matching right and left rear fenders for a 1925 Ford Coupe. Both fenders are in good shape. They need to be beadblasted and painted. I did not paint them because I wanted you to see there is NO BONDO. Asking $125 for each fender, $250 for the pair. Shipping is on you. I can deliver for free to Richmond IN for MTFCA homecoming OR I can...
Last post
Back in FL - taking offers
- 6 Replies
- 829 Views
-
Last post by Grntea
Wed Jun 28, 2023 11:14 am
-
-
WTB driveshaft tube/rear radius rods
Replies: 8
by
Belliott3 » Sun Jun 25, 2023 12:37 pm
First post
I’m looking for a decent driveshaft tube and rear radius rods for a 22 touring.
Last post
I appreciate the offer Darel, but unfortunately I don’t know anyone out that way to bring them to me. Too bad, it sounds like you have some nice stuff!
- 8 Replies
- 750 Views
-
Last post by Belliott3
Tue Jun 27, 2023 8:00 pm
-
-
For Sale: 11-14 Engine Splash Pans
by
John Haynes » Tue Jun 27, 2023 4:40 pm
I have for sale a new pair of Engine Splash Pans painted black. These are correct for 1911 closed valve chamber through 1914. They are ready to bolt on. $120.00 plus shipping. Please email only. I will send photos as request via email.
- 0 Replies
- 342 Views
-
Last post by John Haynes
Tue Jun 27, 2023 4:40 pm
-
-
WTB 1913 TOP SOCKETS
Replies: 1
by
adenautomotive » Tue Jun 27, 2023 2:39 pm
First post
Im in need of top sockets or complete top to fit 1913 touring ,anyone have something for sale?
Last post
Follow this link to get information on who makes top sockets:
- 1 Replies
- 271 Views
-
Last post by havnfun
Tue Jun 27, 2023 4:20 pm
-
-
Want to buy - never out tail light and license plate bracket
Replies: 1
by
Grntea » Mon Jun 26, 2023 5:46 pm
First post
Looking To Buy a blade style combination NEVER OUT tail light and license plate bracket like the one pictured below! Thanks for the help MTFCA!!
Last post
If you have one just laying around - I would appreciate the chance to buy it and put it to good use!
- 1 Replies
- 326 Views
-
Last post by Grntea
Tue Jun 27, 2023 10:59 am
-
-
FOUND - ORIGINAL EARLY NEVEROUT TAILLIGHT & TAG BRACKET
Replies: 2
by
CDooREDW » Wed Jun 21, 2023 10:09 pm
First post
Interested in buying Original Smith’s early Neverout taillight and tag bracket that he had available for Mr. Gould who had already found another.
Larry, left you an email last nite.
Thanks, Larry. Thanks MTFCA!
Last post
The Neverout bracket is on it's way to Ron Wenzel.
- 2 Replies
- 588 Views
-
Last post by Original Smith
Tue Jun 27, 2023 10:37 am
-
-
Wtb 3 non demountable bands
Replies: 1
by
Nv Bob » Sun Jun 25, 2023 2:41 pm
First post
Looking for a set of NON demountable trans bands
Need to be in good usable shape thanks
Bob
Jalopyt@yahoo.com
Last post
I have a good set for you sir. Email for photos. ctleonard64@gmail.com
- 1 Replies
- 353 Views
-
Last post by CTLeonard
Tue Jun 27, 2023 8:31 am
-
-
Transmission band linings
Replies: 1
by
T. R. Quick » Mon Jun 26, 2023 6:11 pm
First post
I’m looking to buy a set of cotton linings for my ‘26 Fordor. Anyone know where I can find a set?
Thanks in advance!
Last post
Email Sent
- 1 Replies
- 412 Views
-
Last post by Schrep771
Mon Jun 26, 2023 8:31 pm
-
-
FS oil can holder
Replies: 2
by
Model T Tom » Mon Jun 26, 2023 7:54 am
First post
Unusual oil can holder I have never seen this style before . Cast iron and spring loaded . Looks NOS . Oil can not included. $75.00 plus shipping .
Tom Butterworth
772-475-9142
Last post
Sold to Robert
- 2 Replies
- 527 Views
-
Last post by Model T Tom
Mon Jun 26, 2023 11:13 am
-
-
For Sale: Mae West Shackle
Replies: 1
by
Bruce Z » Fri Jun 23, 2023 5:28 pm
First post
Mae west shackle $50. plus shipping IMG_0947.JPG IMG_0948.JPG IMG_0824.JPG
Last post
The one painted white is in good condition and came off of a rear end I swapped out of a car. The other is in poor condition but could be restored
- 1 Replies
- 479 Views
-
Last post by Bruce Z
Sun Jun 25, 2023 11:29 pm
-
-
For Sale: Brass Steering Wheel Spider
Replies: 2
by
Bruce Z » Fri Jun 23, 2023 5:21 pm
First post
Original brass spider that to be straightened. Reproduction wood is included. $100 plus shipping IMG_0946.JPG IMG_0945.JPG IMG_0824.JPG
Last post
Sold pending payment
- 2 Replies
- 488 Views
-
Last post by Bruce Z
Sun Jun 25, 2023 11:25 pm
-
-
- 2 Replies
- 515 Views
-
Last post by Bruce Z
Sun Jun 25, 2023 11:22 pm
-
-
Wanted John Reagan Voltage Regulator
Replies: 28
by
WorldChamp1914 » Wed May 17, 2023 2:41 pm
First post
Does anyone have one?
Last post
If you're interested in my progress in this project, you can follow along from here:
I've already finished the circuit diagram and mostly finished w/ the circuit board.
Jeff
- 28 Replies
- 2598 Views
-
Last post by AdminJeff
Sun Jun 25, 2023 7:28 pm
-
-
FS Outside Accessory Brakes (SOLD pending)
Replies: 4
by
ThreePedalTapDancer » Sat Jun 24, 2023 9:45 pm
First post
Here is an original set of Stronghold accessory small drum rear brakes. They have new woven brake lining installed and new springs. Hard to find set of brakes. 500.00 includes shipping.
Last post
Please add my name as well!!
- 4 Replies
- 621 Views
-
Last post by SurfCityGene
Sun Jun 25, 2023 7:18 pm
-
-
FS glass sunvisor
by
colonelpowers » Sun Jun 25, 2023 6:43 pm
I haven't really convinced myself as to whether or not I want to get rid of this and honestly I don't know what it is worth. I has been on my 26 touring since it was new and I love the look of it. I took it off recently because it really blocks my vision when I am driving the car. There are no markings on it and the glass is nearly black on...
- 0 Replies
- 396 Views
-
Last post by colonelpowers
Sun Jun 25, 2023 6:43 pm
-
-
WTB:smooth gray 30x3-1/2" tires
Replies: 1
by
frontyboy » Sun Jun 25, 2023 4:24 pm
First post
Got a set you are not going to use? I need 4 smooth gray tires.
frontyboy test or call 2ho6 919-1949.
scammers don't waste my time , there are certain numbers moulded in the tires I will want photos of before we deal.
Last post
Coker tire has been selling smooth grey blems for $165
- 1 Replies
- 254 Views
-
Last post by Humblej
Sun Jun 25, 2023 6:30 pm
-
-
Mechanical carburetor adjuster
Replies: 3
by
Unprr » Fri Jun 23, 2023 7:28 pm
First post
I was at a local Hill Climb and as I was looking over the cars, I found this unique mechanical carb adjuster.
Has anyone ever seen or used one. If so, anyone have one for sale.
George
Elkhorn, Nebraska
Last post
Looks like it would be easiest to use if you were laying on the floor! For a more finished look, adequate for what it is called upon to do, a nice gearset that is sized and designed for the forces encountered can be found here: beginning page 46
MPC:
- 3 Replies
- 653 Views
-
Last post by Scott_Conger
Sun Jun 25, 2023 3:05 pm
-
-
Winfield 5H Racing Carburetor (SOLD)
Replies: 3
by
ThreePedalTapDancer » Wed Jun 14, 2023 2:34 pm
First post
Very rare original Winfield 5H racing carburetor. Very nice example. Perfect float. 2-5/8 between center of mounting holes. Impossible to find, is a favorite for the racing and speedster guys. 650.00 includes shipping.
F962E621-D446-4BBB-A0DB-9B61BB19F766.jpeg
Last post
Very rare original Winfield 5H racing carburetor. Very nice example. Perfect float. 2-5/8 between center of mounting holes. Impossible to find, is a favorite for the racing and speedster guys. 650.00 includes shipping.
F962E621-D446-4BBB-A0DB-9B61BB19F766.jpeg
- 3 Replies
- 815 Views
-
Last post by ThreePedalTapDancer
Sun Jun 25, 2023 3:02 pm
-
-
FS… Windshields
Replies: 1
by
csnailnrun » Thu May 25, 2023 5:58 pm
First post
Make me an offer. Several windshield frames plus one headlamp cross bar.
Last post
Repost . . . . .
- 1 Replies
- 627 Views
-
Last post by csnailnrun
Sun Jun 25, 2023 12:36 pm
-
-
Ford Coil Box Switch
Replies: 2
by
Unprr » Tue Jun 20, 2023 10:36 pm
First post
I have for sale a Model T Coil Box Switch ( 1913-1922) . It’s in very good condition, except it does not have the key. I operated it with the key out of my Model T and it functions as designed.
Looking for a good home for this switch, make me an offer.
Buyer pays S&H.
Sorry for the small photo. LOL
Sorry, no international shipping
Last post
Thank you MTFCA, item sold.
- 2 Replies
- 566 Views
-
Last post by Unprr
Sat Jun 24, 2023 10:33 pm
-
-
Rajo offset spindles FS
Replies: 10
by
Dan Hatch » Mon Mar 16, 2020 7:19 pm
First post
Here are a pair of real Rajo Offset Spindles. This is the only pair I have ever seen. I have had 10+ sets of offset spindles and this is the only set I have seen marked. They are nice only a small mark from hub rubbing. See pictures. Not bent from being wreaked.
I will take $950.00 for pair + shipping. Email me at address in pictures. Thanks Dan...
Last post
Sold pending payment
- 10 Replies
- 3358 Views
-
Last post by Dan Hatch
Sat Jun 24, 2023 6:44 pm
-
-
For Sale: Figure 8 Shackles
Replies: 2
by
Bruce Z » Fri Jun 23, 2023 5:36 pm
First post
A set plus of original figure 8 shackles. $80 plus shipping IMG_0949.JPG IMG_0950.JPG IMG_0824.JPG
Last post
New price $40.00
- 2 Replies
- 480 Views
-
Last post by Bruce Z
Sat Jun 24, 2023 5:41 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum