Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45008 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
Later style side lights f/s
Replies: 2
by
Philip Lawrence » Tue Jul 13, 2021 3:45 pm
First post
A very nice pair of E & J side lights. No dents or rust to speak of. The fonts have the concave bottoms. The reflectors are the square type used in the later years, lenses are Crack and chip free. These side lights also come with the original nickle plated castle nuts for mounting. $150.00 Plus shipping contact me at five three zero 559 one four...
Last post
Price reduction $125.00. Plus shipping. These lights are in excellent condition. With a few hours work they could be fully restored and mounted on a car. They would also look good as is on a barn find car, just add kerosene and you're good to go!
- 2 Replies
- 845 Views
-
Last post by Philip Lawrence
Wed Jul 14, 2021 3:07 pm
-
-
Hassler shocks
Replies: 1
by
Philip Lawrence » Tue Jul 13, 2021 3:10 pm
First post
For sale, one set of Hassler shock absorbers. This is a front and rear set. Missing the shackle bolts and patent plates which are reproduced. Included are the mounting bolts for the rears. $200.00 plus shipping contact me at five three zero 559 one four four zero. No personal messages please, I won't look for them.
Last post
The Hassler shocks are sold.
- 1 Replies
- 803 Views
-
Last post by Philip Lawrence
Wed Jul 14, 2021 2:57 pm
-
-
Speedster hand air pump and gauge F/S
by
Layden Butler » Wed Jul 14, 2021 2:55 pm
Aluminum hand air pump to pressurize your gas tank, works great and is complete, flange measures 3 1/4 OD, $275 domestic postage included. Also for sale is a working appropriate low pressure gauge ( you can relabel if you want to), $80, free shipping with the pump.
- 0 Replies
- 628 Views
-
Last post by Layden Butler
Wed Jul 14, 2021 2:55 pm
-
-
Roadster saddle arm bracket fs
by
CTLeonard » Wed Jul 14, 2021 2:29 pm
23-25 roadster arm bracket t-7776 LH. These run 230.00 apair in the book. I only have the one; 75.00 plus shipping IMG_20210714_132015213.jpg IMG_20210714_132019613.jpg IMG_20210714_132033056.jpg
- 0 Replies
- 452 Views
-
Last post by CTLeonard
Wed Jul 14, 2021 2:29 pm
-
-
License plate holder fs
by
CTLeonard » Wed Jul 14, 2021 2:02 pm
Unknown plate holder with cast mount. Has numbers on back but can't make them out. A really well made holder. 20.00 plus shipping IMG_20210714_125813124.jpg IMG_20210714_125819500.jpg
- 0 Replies
- 504 Views
-
Last post by CTLeonard
Wed Jul 14, 2021 2:02 pm
-
-
- 0 Replies
- 496 Views
-
Last post by Layden Butler
Wed Jul 14, 2021 12:58 pm
-
-
Prest-O-Lite regulator and valve F/S
Replies: 1
by
Layden Butler » Wed Jul 14, 2021 12:42 pm
First post
Regulator and flow control needle valve for MC ( 4 diameter) carbide tank. Included is length of red rubber hose. $165, domestic postage included.
Last post
More pictures.
- 1 Replies
- 465 Views
-
Last post by Layden Butler
Wed Jul 14, 2021 12:43 pm
-
-
License plate holder fs. Sold
Replies: 1
by
CTLeonard » Wed Jul 14, 2021 10:49 am
First post
It's hard to read; but it says interchangeable no.9. Never out patent pend. 35.00 plus shipping IMG_20210714_094512180.jpg IMG_20210714_094556592.jpg
Last post
I will take it Thanks, Mike
- 1 Replies
- 494 Views
-
Last post by mike black
Wed Jul 14, 2021 11:41 am
-
-
Spare tire carrier fs
by
CTLeonard » Wed Jul 14, 2021 10:57 am
Homemade spare tire carrier for wire wheels to mount on a huckster or whatever. 20.00 plus shipping IMG_20210714_095410711.jpg IMG_20210714_095424918.jpg IMG_20210714_095405309.jpg
- 0 Replies
- 580 Views
-
Last post by CTLeonard
Wed Jul 14, 2021 10:57 am
-
-
FOR SALE - Rear mount STOP light
Replies: 1
by
Jay In Northern Ca. » Tue Jul 13, 2021 8:27 pm
First post
This is a nice original STOP light in excellent condition. Asking $75 plus postage. STOPLITE front.JPG STOPLITE back.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
Last post
I'd love to buy it - I'll send you an email now.
- 1 Replies
- 747 Views
-
Last post by Jack Tarlinton
Tue Jul 13, 2021 10:07 pm
-
-
- 0 Replies
- 670 Views
-
Last post by Jay In Northern Ca.
Tue Jul 13, 2021 8:32 pm
-
-
For Sale: Carburetor Hot Air Pipes
Replies: 2
by
Ed Fuller » Wed Jul 07, 2021 8:08 pm
First post
Here is a pair of carburetor hot air pipes.
$20 plus $8 shipping in the U.S. for the pair.
19D34092-083F-4268-BE8A-5AC7A4C16EC9.jpeg
FAE63D35-9284-4CD7-93B2-98BF49EF6816.jpeg
Last post
Sold!
Thanks MTFCA classifieds!
- 2 Replies
- 1032 Views
-
Last post by Ed Fuller
Tue Jul 13, 2021 8:03 pm
-
-
Model T Rear Fender Not For Coupe For Sale. $400 Each or Best Reasonable Offer.
Replies: 5
by
Mr. T Ford » Mon Jun 14, 2021 8:19 pm
First post
Model T Rear Fender Not For Coupe For Sale. $400 Each or Best Reasonable Offer.
Fender 1.jpeg fender 2.jpeg fender 3.jpeg
Last post
Just a heads up, you don't have to redo the whole ad each time. You can edit the title or description on the first one, click on the pencil. If you want to bring back to top, post a new Quick Reply with bump to top and hit submit.
- 5 Replies
- 1440 Views
-
Last post by Mark Gregush
Tue Jul 13, 2021 7:50 pm
-
-
Want to buy 1927 Model TT doors (left and right). Poor condition is OK
by
budoboy » Tue Jul 13, 2021 7:41 pm
I have a yard art 1927 Model TT that needs some doors. Rusty and moth holed is fine. I would rather pick them up in California but would consider paying shipping. Let me know what you have and what you want. My e-mail is budoboy@sbcglobal.net. You can also send me a private message. Thank you, Jeff
- 0 Replies
- 530 Views
-
Last post by budoboy
Tue Jul 13, 2021 7:41 pm
-
-
Budd 30x3 1/2 wire wheel sell or trade
by
Layden Butler » Tue Jul 13, 2021 5:35 pm
Solid true no missing or bent spokes Budd 30 x 3 1/2 wire wheel, consider offer but would prefer to trade for Pasco accessory wire wheel. Yes I would consider purchase of Pasco wire wheels that might be offered!
- 0 Replies
- 725 Views
-
Last post by Layden Butler
Tue Jul 13, 2021 5:35 pm
-
-
FS fan bracket
by
Will_Vanderburg » Tue Jul 13, 2021 2:05 pm
For sale. One cast steel fan bracket. I do not know if it’s NOS or reproduction. It is NOT Ford marked. Should be for 12-16
$30 bucks and I’ll include shipping to you in the US.
- 0 Replies
- 604 Views
-
Last post by Will_Vanderburg
Tue Jul 13, 2021 2:05 pm
-
-
Model T Original Carburetor Lock To Prevent Car Theft.
Replies: 4
by
Mr. T Ford » Mon Jun 14, 2021 7:56 pm
First post
Model T Original Carburetor Lock To Prevent Car Theft.
Lock includ carb lock 1.jpeg carb lock 2.jpeg es original box and key. $275 Or Best Reasonable Offer.
Last post
Model T Original Carburetor Lock To Prevent Car Theft
Lock in original box and key. Price Reduced From $275 To $160
- 4 Replies
- 1848 Views
-
Last post by Mr. T Ford
Tue Jul 13, 2021 10:33 am
-
-
FS - Winfield 4V - 1.12" Throat
Replies: 3
by
blauvelt » Mon Jul 12, 2021 9:43 am
First post
Winfield 4V, as is. 28.5 mm / 1.12 throat. In pretty good shape, barrel shows minimal wear/wiggle, casting is really clean, all the little bits that are on the carb are in nice shape. Please see attached images, email with any questions. $325.00 + shipping.
Last post
Sold. Thank you.
- 3 Replies
- 1324 Views
-
Last post by blauvelt
Mon Jul 12, 2021 8:50 pm
-
-
Model A wire wheels
Replies: 2
by
Larry LaPatka » Sun Jul 11, 2021 4:07 pm
First post
Need 4 or 5 Model A. 21” wire wheels (1928 or 1929)
To finish a project.
Call 423.237.8846 or 423.623.5656
Thanks MTFCA
Larry LaPatka
Parrottsville, Tennessee.
Last post
quick shot of the 4
- 2 Replies
- 1044 Views
-
Last post by TRDxB2
Mon Jul 12, 2021 6:52 pm
-
-
TT truck REAR double hasslers for sale.
Replies: 3
by
Dropacent » Mon Jul 12, 2021 12:54 am
First post
Ever seen a set? Probably not. One of the very hardest TT accessory items to find. Nice pair, they have been totally rebuilt with new bushings and bolts, beadblasted and powder coated. $1000 ppd to your door. Tmorsher@icloud.com I am looking for a nice pair of double rear hasslers for a T and would allow some $$ off the purchase of these.
Last post
Dust is included, no extra charge! I had a set of TT float-A-fords ( all 4 corners) years ago. Rust pitted but equally rare ! B7CC3783-3FB5-43E2-85CC-5F6975FD1878.jpeg
- 3 Replies
- 985 Views
-
Last post by Dropacent
Mon Jul 12, 2021 6:08 pm
-
-
WTB clutch pedal pre 18
Replies: 1
by
Nv Bob » Sun Jul 11, 2021 4:26 pm
First post
Need a good low pedal for pre 18 non starter hogs head
Don't need shaflt just a pedaloooo
Thanks bob
Last post
I have a rebuilt one. see photos, Bob
815-633-7244
- 1 Replies
- 775 Views
-
Last post by FATMAN
Mon Jul 12, 2021 11:12 am
-
-
FS Pair of Front wire hubs
Replies: 1
by
Ruxstel24 » Sun Jul 11, 2021 10:37 am
First post
Both have the bearing races in them still and are tight.
The one on the left has some rust pitting but is completely useable.
$125 for both including shipping USA.
Email only please hpautorepairdd AT Gmail dot com
Last post
Sold pending payment :)
- 1 Replies
- 804 Views
-
Last post by Ruxstel24
Mon Jul 12, 2021 9:06 am
-
-
Lot of coil boxes for sale
Replies: 1
by
2manyprojects » Mon Jul 12, 2021 6:20 am
First post
I have one lot , see picture, of coil boxes for sale. I want to sell them as a group rather than piecemeal so have priced the lot at $200. Prefer local pickup but will pack and ship on your dime. I may add more as I clean up the parts I found.
This is my first posting to sell parts so I will check back here frequently.
Mike
Last post
0C0E7D2F-D9E3-4F9D-9EB9-578300AD9157.jpeg
- 1 Replies
- 952 Views
-
Last post by 2manyprojects
Mon Jul 12, 2021 6:25 am
-
-
Tubro 400 Clutch Hub FS
Replies: 2
by
Dan Hatch » Sun Jul 11, 2021 4:32 pm
First post
Here is a oldie. Remember back before they started making 400 clutch hubs? Here is one I got in some stuff. Model T guy engineering at its best. $20.00 + shipping. Email me at address in pictures.
0F09EF8B-84D6-4475-A71B-E6A7E4035DE3.jpeg
AC55DB35-CA90-4ADB-B95F-87E109ECFDC2.jpeg
F2710018-AAFF-4ECF-BA3E-FF0F19193DB1.jpeg
Last post
Have not gotten your email. Send again. Thanks Dan
- 2 Replies
- 842 Views
-
Last post by Dan Hatch
Mon Jul 12, 2021 6:18 am
-
-
SOLD FS 3" FRONT DROP AXLE
Replies: 6
by
mlane65 » Sat Jul 10, 2021 9:39 am
First post
SOLD SOLD SOLD (3 Drop / Stretched front axle. This was purchased from Nostalgia Sids. Has lightning holes. It is used and just recently was removed from a speedster. Threads and holes are good. Perch bushings are good also. $190.00 plus S/H please message me for shopping quote. PayPal Friends and Family for payment please
Last post
Shucks, I missed it by five while correcting my typing and grammar- my theory is that nobody wants to box up a core, spend an hour and 40 bucks to ship it from the local spot and then wait however long to get one back? its not much more loot to have one done up, but we love convenience over here. I don't really even need one at the moment but its...
- 6 Replies
- 1616 Views
-
Last post by Lil Teezy
Sun Jul 11, 2021 11:33 pm
-
-
30x3 made in USA non skid tires
Replies: 3
by
Els1915 » Fri Jul 09, 2021 4:00 pm
First post
30 x 3 NON Skid tires (4) That are off a older show car that was barely driven. These are Made in USA for the person who is the purest. 5hey are very pliable. The tubes need replaced. Price is $750 or obo plus shipping. Eric. 815 535 1367
Last post
TIRES ARE SOLD. THANKS
- 3 Replies
- 1414 Views
-
Last post by Els1915
Sun Jul 11, 2021 11:03 pm
-
-
New 1/32 OS Valves FS
by
Dan Hatch » Sun Jul 11, 2021 4:09 pm
Here are 10 new never opened SS valves for Sale. Extra for me I opened up one for pictures. $75.00 + shipping. Email me at address in pictures
E6614943-C155-4DE2-9608-F6B80E58679E.jpeg
BB3C665E-C9C7-42AC-8EEB-E588C9D3E5FE.jpeg
2CFF808B-90EB-4A9B-8153-E0B38C1C67D5.jpeg
- 0 Replies
- 631 Views
-
Last post by Dan Hatch
Sun Jul 11, 2021 4:09 pm
-
-
Auto Lite manifold heater
Replies: 4
by
Tbird » Fri Jul 09, 2021 10:41 pm
First post
I'm pretty sure this is for a Model A but not sure, maybe an expert may know. Both halves
$30 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9006.JPG
IMG_9005.JPG
Last post
Sold to Paul. Thanks!
- 4 Replies
- 1137 Views
-
Last post by Tbird
Sun Jul 11, 2021 4:08 pm
-
-
Early Fender Irons
Replies: 2
by
Tbird » Fri Jul 09, 2021 10:09 pm
First post
Very nice set of straight and clean fender irons
$50 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8974.JPG
IMG_8973.JPG
Last post
Sold to Bob. Thanks!
- 2 Replies
- 820 Views
-
Last post by Tbird
Sun Jul 11, 2021 1:58 pm
-
-
Stuff FREE SHIPPING
by
Dropacent » Sun Jul 11, 2021 12:55 pm
Out the door this week, 6 Rajo oil level gauges, henry ford radiator cap ornament, 4 day-nite gas gauges, zenith choke, stromberg choke, whatcha need or want? Still have our key sales boards along with a very limited stock of numbered ford script key sets. Some items are getting down there and will not be made again ( at least by us)...
- 0 Replies
- 821 Views
-
Last post by Dropacent
Sun Jul 11, 2021 12:55 pm
-
-
Sold Non Script Ford keys For Sale
Replies: 1
by
fordrelic » Sun Jun 20, 2021 9:28 am
First post
If you need and extra key, or one to start your T . I have several Non script keys for sale. $5 each plus $1 shipping. I accept cash, MO, or check.
I may have a set if you are interested.
Thanks,
fordrelic
Last post
All Non Script Ford keys sold. Thanks MTFCA
- 1 Replies
- 855 Views
-
Last post by fordrelic
Sun Jul 11, 2021 9:13 am
-
-
Sold !! Robert Bosch Brass spark plug gap tool
Replies: 2
by
Ruxstel24 » Sat Jul 10, 2021 7:31 pm
First post
Neat little plug gap tool, Has Mag on one end and Batt on the other. I didn't check but looks like 0.030 and 0.28 ?
Robert Bosch and Germany, (glasses for scale) $20 including shipping USA
Email only please, hpautorepairdd AT Gmail dot com
Last post
Sold to Layden, thanks MTFCA !!
- 2 Replies
- 912 Views
-
Last post by Ruxstel24
Sun Jul 11, 2021 9:12 am
-
-
SOLD SOLD For Sale*** Perfection brakes for small drums.
Replies: 2
by
Jack Putnam, in Ohio » Fri Jul 09, 2021 8:20 pm
First post
I have a set of Perfection external contracting brakes similar to Rockys. They will need restoration. These mount directly to wood spoke wheels and slide over the small brake drum. This photo is from the forum. Asking $175 + the ride. 419-3zero six-39six six
Last post
Brakes have been sold. Thanks MTFCA.
- 2 Replies
- 1204 Views
-
Last post by Jack Putnam, in Ohio
Sat Jul 10, 2021 9:29 pm
-
-
Nickel Headlamp reflectors bezels and Springs NEW
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:13 pm
First post
These are a new pair (still in box and packaging) of headlamp reflectors, Bezels, and Retainer Springs
$100 Plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8979.JPG
IMG_8978.JPG
IMG_8977.JPG
Last post
Sold to Dan. Thanks!
- 1 Replies
- 699 Views
-
Last post by Tbird
Sat Jul 10, 2021 8:46 pm
-
-
- 0 Replies
- 828 Views
-
Last post by Mike Fortney
Sat Jul 10, 2021 8:27 pm
-
-
SOLD FS Modern Set of Valves (used)
Replies: 1
by
mlane65 » Sat Jul 10, 2021 10:55 am
First post
SOLD PENDING PAYMENT Set of (8) modern valves, springs, retainers and keepers. I just removed these from my speedster to convert over to OHV. 1.50 head and the stems all mic out at .341 $60.00 delivered to your door. Paypal friends and family for payment please.
Last post
Message sent.
- 1 Replies
- 1076 Views
-
Last post by JTT3
Sat Jul 10, 2021 3:16 pm
-
-
Early Spring Perches with oil holes
Replies: 2
by
Tbird » Fri Jul 09, 2021 10:31 pm
First post
Set of over the axle spring perches
$50 Plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8993.JPG
IMG_8992.JPG
Last post
Sold to Bob. Thanks
- 2 Replies
- 887 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:42 pm
-
-
2 orphan 13-14 hoods. Sold
Replies: 5
by
CTLeonard » Thu Jul 08, 2021 12:39 pm
First post
Please dont throw us in the scrap pile.they lived too long. One has solid handles the other stamped.not alot else to say about them. Wouldn't take much more than shipping to give them a new home. IMG_20210708_113159843.jpg IMG_20210708_113057198.jpg IMG_20210708_113104431.jpg
Last post
Did you notice the intakes on top? I really don't want to sell the heads; but I do have a stash if flathead engines
- 5 Replies
- 1532 Views
-
Last post by CTLeonard
Sat Jul 10, 2021 10:29 am
-
-
SOLD FS Aluminum 2 Piece Valve Covers
by
mlane65 » Sat Jul 10, 2021 10:20 am
Polished aluminum 2 piece valve covers with stainless domed head bolts. $50.00 shipped to your door in small flat rate box. PayPal friends and family for payment please.
- 0 Replies
- 781 Views
-
Last post by mlane65
Sat Jul 10, 2021 10:20 am
-
-
10 Tooth Pinon Gear #2
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:37 pm
First post
Another nice pinon gear These are great for hill climbing gives you a little more grit in your drive
$100 Plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8998.JPG
Last post
Sold to Terry. Thanks!
- 1 Replies
- 627 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:59 am
-
-
Brass Radiator Hex Cap NEW
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:42 pm
First post
New Hex cap still in packaging
$20 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9007.JPG
Last post
Sold to Jeff. Thanks
- 1 Replies
- 556 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:27 am
-
-
Model T accessory Dash Light NEW
Replies: 1
by
Tbird » Fri Jul 09, 2021 11:11 pm
First post
Accessory dash light for 19-27 Model T NEW
$20 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8972.JPG
IMG_8971.JPG
Last post
Sold to Jeff. Thanks
- 1 Replies
- 609 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:21 am
-
-
Brass Radiator cap 13-16
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:03 pm
First post
$5 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8960.JPG
IMG_8959.JPG
Last post
Sold to Jeff. Thanks!
- 1 Replies
- 500 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:20 am
-
-
10 Tooth Pinon Gear #1
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:33 pm
First post
Very nice 10 Tooth Pinon Gear
$100 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8997.JPG
Last post
Sold to John Thanks!
- 1 Replies
- 471 Views
-
Last post by Tbird
Sat Jul 10, 2021 12:07 am
-
-
1917-20 Stewart Speedo, Wheel gear, and Swivel
Replies: 2
by
Tbird » Fri Jul 09, 2021 10:52 pm
First post
Here is a Stewart Speedo Model 160 2 wheel gears and Swivel correct for 1917-1920. The Swivel has the external spring for the dope cup.
$150 for all
mikebird@lifeattheridge.net or 574-584-6744
IMG_9004.JPG
IMG_9003.JPG
IMG_9002.JPG
IMG_9001.JPG
Last post
Sold to John. Thanks!
- 2 Replies
- 603 Views
-
Last post by Tbird
Fri Jul 09, 2021 11:51 pm
-
-
26-27 Deck lid latch and Key
Replies: 2
by
Tbird » Fri Jul 09, 2021 10:07 pm
First post
Deck lid latch and key- USED
$20 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8970.JPG
IMG_8969.JPG
Last post
John,
Yes it's yours. I'm going to need a address to get you a shipping cost. Please email me directly to mikebird@lifeattheridge.net or text 574-584-6744
Thanks
- 2 Replies
- 684 Views
-
Last post by Tbird
Fri Jul 09, 2021 11:40 pm
-
-
AC Speedometer Road Gear $5
by
Tbird » Fri Jul 09, 2021 11:16 pm
Here is the A.C. Road Gear for 1920 and up. Can be mounted on wood or wire wheel
$15 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9008.JPG
- 0 Replies
- 452 Views
-
Last post by Tbird
Fri Jul 09, 2021 11:16 pm
-
-
Leather Crank Holder with brass buckle NEW
Replies: 1
by
Tbird » Fri Jul 09, 2021 10:06 pm
First post
Brand new still in packaging
$7 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8963.JPG
Last post
Sold to David Thanks!
- 1 Replies
- 493 Views
-
Last post by Tbird
Fri Jul 09, 2021 11:03 pm
-
-
Transmission Pedals
by
Tbird » Fri Jul 09, 2021 10:59 pm
I have two pedals. Decent Shape
$10 plus shipping for the pair
mikebird@lifeattheridge.net or 574-584-6744
IMG_8968.JPG
- 0 Replies
- 473 Views
-
Last post by Tbird
Fri Jul 09, 2021 10:59 pm
-
-
Gull Wing Jr. Boyce Moto Meter
Replies: 2
by
Tbird » Fri Jul 09, 2021 10:05 pm
First post
Very nice Jr. Moto meter with gull wing cap
$70 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8962.JPG
IMG_8961.JPG
Last post
Sold to Bill Thanks!
- 2 Replies
- 716 Views
-
Last post by Tbird
Fri Jul 09, 2021 10:37 pm
-
-
Machinery Data Sheet Book 1929
by
Tbird » Fri Jul 09, 2021 10:15 pm
Here's something interesting!
Make offer plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_8982.JPG
IMG_8981.JPG
- 0 Replies
- 458 Views
-
Last post by Tbird
Fri Jul 09, 2021 10:15 pm
-
-
Buffalo Wire Wheels (30x3.5)
Replies: 11
by
Bruce Z » Fri May 21, 2021 8:56 am
First post
Four Buffalo wire wheels are sand blasted and primed including hubs and caps. The two rear hubs and one front are new. $3,500 plus shipping
Last post
Thanks MTC. Sold Pending Payment
- 11 Replies
- 3513 Views
-
Last post by Bruce Z
Fri Jul 09, 2021 6:35 pm
-
-
12-39 (3.25 ratio) gearset wanted
Replies: 3
by
Bruce Compton » Thu Jul 08, 2021 3:00 pm
First post
Looking for new or very good used 12-39 (3.25) rear end gears for my Ruckstell. Thanks : Bruce
Last post
I might but I would have to dig for them
- 3 Replies
- 1032 Views
-
Last post by Bruce Z
Fri Jul 09, 2021 6:27 pm
-
-
EE crank fs. Sold
by
CTLeonard » Fri Jul 09, 2021 3:02 pm
EE crank for sale. 150.00 plus shipping IMG_20210709_135601264.jpg IMG_20210709_135634866.jpg IMG_20210709_135546703.jpg
- 0 Replies
- 681 Views
-
Last post by CTLeonard
Fri Jul 09, 2021 3:02 pm
-
-
1926 Ford Model T Touring
by
Vkseyna » Fri Jul 09, 2021 1:48 pm
For Sale: 1926 Ford Model T Touring - 4 door, black. Third owner, almost completely restored. Has window curtains, and 2 extra wheels with wooden spokes. Currently registered and road worthy. Runs well. Asking $15000 Email questions to vkseyna@yahoo.com.
- 0 Replies
- 702 Views
-
Last post by Vkseyna
Fri Jul 09, 2021 1:48 pm
-
-
Engine blocks
Replies: 1
by
CTLeonard » Thu Jul 08, 2021 1:33 pm
First post
I have a few blocks; this one was in the shop April 21. Tops of cylinders are in the area of 3.748. 350.00 seems to be a fair price. Shipping or pickup is on you. The other blocks- same price- range from 16 up. If you have a year you want just ask. I do have a very clean Sept. 12 block with the 4 L head and correct timing cover. Number 148 xxx. It...
Last post
12 block has sold
- 1 Replies
- 952 Views
-
Last post by CTLeonard
Fri Jul 09, 2021 1:07 pm
-
-
Hayes Chevy 490 rim / superior K wheel rim
Replies: 11
by
Bmettli » Thu Jul 08, 2021 11:10 am
First post
I have had this rim for years when I bought some parts. Someone told me it’s a Chevy 490 or superior K rim. I have no idea. If you can identify it and use it, shoot me an offer!
Measures 24.25 inches across from lip to lip, width is 3.25 from the outer lip to outer lip, 2 and 3/8 on the inner width.
It is stamped Hayes
Last post
We run them on my son's 10 cwt lorry with 4.40 x 23 tyres. All you need to do is redrill the valve stem hole in the appropriate place. If you run a rim liner, you don't even have to weld up the Chev valve stem hole, but we did. We did not bother welding up the slotted lug. If you do you, will have to file it into the usual oval shape of a T rim....
- 11 Replies
- 1991 Views
-
Last post by Allan
Fri Jul 09, 2021 7:08 am
-
-
WTB Parts for a Stephens Six !Possible Source Found!
Replies: 20
by
TRDxB2 » Mon Jun 21, 2021 4:22 pm
First post
Got in a conversation with a person in Sweden looking for parts to restore a Stephens Six. Turns out the car was mad in Freeport Illinois (thats not far from Bob's in Loves Park). Turns out that the engine was made here in Moline by Roots and VanDerVoot. Any way what he needs are door handles and hub caps but I'm sure he'd be interested in...
Last post
Here is the gasket I have for a Stephens. Victor #84
Has a damaged spot, but I am quite certain it would work fine. The sealing ring on the combustion chamber is fine. $35 bucks plus shipping. Described
as 17-22.
Victor 84, Fitzgerald 209 Mc Cord 5039. Yes Victor 84 fits Stephens . I appreciate your efforts to help me but I am afraid that this...
- 20 Replies
- 3299 Views
-
Last post by The Wiking
Thu Jul 08, 2021 3:55 pm
-
-
- 0 Replies
- 650 Views
-
Last post by dmdeaton
Thu Jul 08, 2021 2:32 pm
-
-
13-14 hood. Sold
by
CTLeonard » Thu Jul 08, 2021 12:19 pm
Handy man special! The blue hood has a bad side. The black hood has bad tops one really good side the other side has some dents along the bend. All in all though; you've got a good top with 3 sides to work with. All handles are solid- does that mean aluminum? Get them both for 150.00 plus shipping IMG_20210708_110819901.jpg...
- 0 Replies
- 595 Views
-
Last post by CTLeonard
Thu Jul 08, 2021 12:19 pm
-
-
1914 rear end
by
Franko » Thu Jul 08, 2021 12:14 pm
1913/14 rear end . Got it for a spare. Won’t need it. Cleaning garage out. Turns easy, axle threads good. No driveshaft or radius rods. Pickup only! Can possibly deliver to MTFCI tour in New Philadelphia,Ohio July 18th or Ohio Jamboree in Marion,Ohio Sept. 3rd. $225. Tim 216-447-0437
- 0 Replies
- 794 Views
-
Last post by Franko
Thu Jul 08, 2021 12:14 pm
-
-
John Brown 105 Tail lamp
Replies: 1
by
DaveB » Tue Jul 06, 2021 4:19 pm
First post
This is a show quality lamp excellent glass no cracks, dents , or scratches. No cracks in the brass glass holders, excellent fount and sharp crisp top stamping, and original burner. The reproduction E & J are $375 and burner not included. Asking $445.00 its been in storage for many years. I can send photos to your cell phone or email . Will list...
Last post
Sold pending payment.
- 1 Replies
- 845 Views
-
Last post by DaveB
Thu Jul 08, 2021 10:09 am
-
-
Gray and Davis parts and drawings wanted
Replies: 1
by
Paul Rose » Wed Jul 07, 2021 8:54 pm
First post
Looking to purchase or get drawings and any other information on Gray and Davis starter / generator. I am missing engine mounting bracket. Any help would be greatly appreciated.
Last post
Hello Paul, I have spent at least 20 years hunting and collecting literature on the Type 301. I likely can help out a bit . - Dusty
- 1 Replies
- 822 Views
-
Last post by DustySpokes
Wed Jul 07, 2021 9:19 pm
-
-
WANTED: Boyce motometer
Replies: 4
by
Jack Tarlinton » Wed Jul 07, 2021 9:22 am
First post
Hi everyone,
I'm looking for a Boyce motometer for my 1926/27 tourer cutoff.
I'll consider all options, dogbone, wings etc etc.
My car has heavy patina so the motormeter can have patina too.
I'm in Sydney, Australia so I'd need it shipped - PayPal is the best way for me to pay international sellers.
Thanks in advance
Jack
Last post
I will check to see what I have. Not all of these items are in one place. I shoulkd be able to supply a nice working old meter of the Model T size with a For the Ford Car plate. I will look for a radiator cap. I have some, but I will see what would look nice on your car.
Thank you - a working version would be great!
- 4 Replies
- 1168 Views
-
Last post by Jack Tarlinton
Wed Jul 07, 2021 9:08 pm
-
-
WTS,Pre-23 Accessory window frames for touring car
Replies: 1
by
Caswell » Sun Jun 27, 2021 7:48 pm
First post
For Sale, still new in the box, three accessory window frame set (6 frames 3-in/3-out) with original intact glass. $60 includes shipping (lower 48) PayPal F&F
Last post
Bump to top, one time.
- 1 Replies
- 725 Views
-
Last post by Caswell
Wed Jul 07, 2021 5:30 pm
-
-
Henry Ford radiator topper for sale
by
Dropacent » Wed Jul 07, 2021 3:46 pm
We sell these to the model A people once in awhile. Cast hollow, in ol’ henrys likeness. He can be attached to about anything with a hole in it. Cap show but not included. $225 ppd tmorsher@icloud.com is the only way to reach me. Thanks! A630857B-C3A8-446C-8AAD-A06FD46E7EB0.jpeg A8E504C4-9D4B-42C3-AFB6-856F636A7380.jpeg...
- 0 Replies
- 845 Views
-
Last post by Dropacent
Wed Jul 07, 2021 3:46 pm
-
-
WTB Manifold
Replies: 2
by
Art Ebeling » Wed Jul 07, 2021 1:51 pm
First post
WTB an exhaust manifold for a 22. Thanks, Art
Last post
PM sent, Art
- 2 Replies
- 893 Views
-
Last post by Art Ebeling
Wed Jul 07, 2021 3:07 pm
-
-
Clear transmission cover (new prices)
Replies: 3
by
johnyergler » Sat Jul 03, 2021 2:31 pm
First post
Just putting this out there to see if anyone is interested in having a clear transmission cover made up. I was having transmission issues after a rebuild and wanted to see inside the hogs head while the engine was running without spattering oil everywhere! I designed and cut out this clear acrylic hogs head transmission cover and it worked amazing...
Last post
Hi Brent,
So to answer your question, yes. It is laser etched. I can either do a reverse image and have it on the inside of the cover so the outside is smooth, or I can engrave it on the outside. Either way it is visible, but for the one in the photos I posted, it was engraved on the outside. As for the file that I would need, any Adobe...
- 3 Replies
- 1590 Views
-
Last post by johnyergler
Wed Jul 07, 2021 8:34 am
-
-
WTB: 13/14 Upholstery
Replies: 18
by
RichJ » Tue Feb 09, 2021 6:31 am
First post
Does anyone have any used but decent seat/backrest covers? I'm needing some stuff to repair my new 40-year-old rodent-damaged seat and backrest. I'm not concerned about period correct as nothing else is. I'm just trying to end up with a presentable driver.
Thanks,
Rich J
561-262-0393
Last post
Charlie
Thanks for replying
I sent Email
Rich
- 18 Replies
- 3407 Views
-
Last post by RichJ
Wed Jul 07, 2021 6:13 am
-
-
WTS 2 pairs of hood shelves 17-23, 23-25.
Replies: 3
by
Caswell » Tue Jul 06, 2021 7:08 pm
First post
For sale, 2 pairs of hood shelves . One set early 17-23 without dog leg and are perfect and the other with dog leg need some work. If it's in the pictures it goes in a box. $100 shipped (lower 48), PayPal F&F.
Last post
Lets try $75.
- 3 Replies
- 767 Views
-
Last post by Caswell
Tue Jul 06, 2021 10:52 pm
-
-
Holley NH carburetor-FOUND
Replies: 1
by
Robert Kiefaber » Tue Jul 06, 2021 1:52 pm
First post
I need either a rebuilt ( preferably) or a restorable Holley NH carburetor. I’m trying to get my 1907 model R to start and the original carb. Is not making it easy. Pm me or send email to:
info@aestheticinteriors.com
Thanks, Bob
Last post
I sent you an email.
- 1 Replies
- 1052 Views
-
Last post by Corey Walker
Tue Jul 06, 2021 9:42 pm
-
-
FS:1917-1923 Ford Model T Low Style Radiator. Flat Core Modern Radiator $650
Replies: 2
by
jwilliams81 » Tue Jul 06, 2021 12:47 pm
First post
This is a like new radiator that was run for one season. The previous owner took it off the car to do some hood work and never put the car back together. This looks like a Brassworks radiator but I can not be sure. Previous owner said it was the flat core used for touring. The rod support has a piece of threaded rod to protect the threads, unscrew...
Last post
The radiator has been sold.
Thanks MTFCA!
- 2 Replies
- 1116 Views
-
Last post by jwilliams81
Tue Jul 06, 2021 6:10 pm
-
-
30x3.5 Universal Smooth Black Tires
Replies: 7
by
SMHnat » Tue Jun 01, 2021 11:40 pm
First post
I have four 30x3.5 tires and metal stem tubes. The tires are Universal black smooth tires. They don't seem to have any wear on them, but I know they did roll about 400 yards. I would consider the tires like new as good as new. Tubes held air when they were last on a car.
$900 obo
Send me a message if interested.
Located 30 miles north of...
Last post
SOLD. Dont know how to delete post.
- 7 Replies
- 2903 Views
-
Last post by SMHnat
Tue Jul 06, 2021 5:31 pm
-
-
Low head fs. Sold
Replies: 1
by
CTLeonard » Wed Jun 23, 2021 4:14 pm
First post
This came off of a fake 13 engine.some of you know that story. Has a bugger in no. 1; see pic. Straight edge runs true across bottom. Threads are good . 400.00 plus shipping IMG_20210623_145446216.jpg IMG_20210623_145406114.jpg IMG_20210623_145423763.jpg IMG_20210623_145347617.jpg IMG_20210623_145352950.jpg
Last post
Thought someone was looking
- 1 Replies
- 1049 Views
-
Last post by CTLeonard
Tue Jul 06, 2021 3:18 pm
-
-
- 1 Replies
- 707 Views
-
Last post by CTLeonard
Tue Jul 06, 2021 2:46 pm
-
-
Model 16 Jno. Brown Headlights
Replies: 3
by
colonelpowers » Mon Jul 05, 2021 12:03 am
First post
Hello,
I have a decent set of Jno. Brown headlights that I am not going to be needing. I honestly don't know what they are worth but I would be willing to hear offers or possible trades.
Thanks and God Bless,
Joshua A Powers
Last post
SOLD Headlights
- 3 Replies
- 1250 Views
-
Last post by colonelpowers
Tue Jul 06, 2021 1:39 pm
-
-
Coil
Replies: 4
by
CTLeonard » Thu Jul 01, 2021 1:03 pm
First post
Don't have a clue what it is or what it's for. Make an offer if you feel you need it IMG_20210701_115443876.jpg IMG_20210701_115451372_HDR.jpg IMG_20210701_115507682_HDR.jpg
Last post
I believe that some spark plug testers had similar coils if not the same. Jim
- 4 Replies
- 1790 Views
-
Last post by TFan
Mon Jul 05, 2021 11:39 pm
-
-
WTB weaver auto hoist
Replies: 3
by
Shelbycsx » Sat Jul 03, 2021 6:54 pm
First post
Looking for a complete weaver auto hoist near NJ.
Last post
I have one but in California
tom leroux
7144123200
- 3 Replies
- 1544 Views
-
Last post by TLeroux
Mon Jul 05, 2021 10:36 pm
-
-
For Sale: Speedster windshield
Replies: 3
by
Ed Fuller » Fri Jul 02, 2021 8:15 pm
First post
These are some windshield parts that I had collected that I thought I might use when I was building my speedster. I ended up using something different and I have these parts left over.
I think they are from either a Dodge or a Studebaker. I’m not sure. I have two different sets of posts and one lower frame. I thought it would look neat with the...
Last post
Sold.
Thank you MTFCA classifieds.
- 3 Replies
- 1384 Views
-
Last post by Ed Fuller
Mon Jul 05, 2021 8:25 pm
-
-
For Sale: Early Brass Windshield Support Rods 1909-1912?
Replies: 7
by
Ed Fuller » Tue May 25, 2021 8:36 pm
First post
This is a set of early original brass windshield support rods.
I believe these were used from 1909-1912 but I’m not exactly sure. These aren’t in the best shape, but would be good for an unrestored car or to use as a pattern. They both have cracks and wear marks. One has a crack the entire length. I tried my best to get pictures of all of the...
Last post
Sold.
Thank you MTFCA classifieds.
- 7 Replies
- 2388 Views
-
Last post by Ed Fuller
Mon Jul 05, 2021 8:05 pm
-
-
Green Engineering racing front plate with oil pump F/S
Replies: 1
by
Layden Butler » Mon May 17, 2021 2:22 pm
First post
Original 1920s race car accessory timing cover front plate with oil pump made by Green Engineering. $900 domestic packaging and shipping included. This could well be the only one you will ever see let alone have a chance to own!
Last post
$825 including domestic shipping!
- 1 Replies
- 1606 Views
-
Last post by Layden Butler
Mon Jul 05, 2021 6:29 pm
-
-
- 1 Replies
- 666 Views
-
Last post by Caswell
Mon Jul 05, 2021 4:26 pm
-
-
Frontenac SR Overhead Cam Head Spoken For
Replies: 5
by
Layden Butler » Sun Jul 04, 2021 1:06 pm
First post
Nice cylinder head completely rebuilt and ready to run, the cam drive setup is a combination of original and reproduction parts some of which are castings that need machined, so call this a project. Happy to answer any questions, can supply more pictures, packaging for domestic shipping to you or your freight forwarder is included, available for...
Last post
Spoken For
Thanks to MTFCA
- 5 Replies
- 1906 Views
-
Last post by Layden Butler
Mon Jul 05, 2021 4:22 pm
-
-
U joint F/S
by
Layden Butler » Mon Jul 05, 2021 4:07 pm
Very gently used, no wear no loose rivets clean ready to install. Ford script. $65, domestic shipping $12.
- 0 Replies
- 609 Views
-
Last post by Layden Butler
Mon Jul 05, 2021 4:07 pm
-
-
1920 Illinois Truck plates for sale
Replies: 1
by
fordrelic » Sun Jun 20, 2021 9:41 am
First post
I have a set of 1920 Illinois truck license plates in good condition with original paint. $60.
I can send a picture if interested.
Thanks,
fordrelic
Last post
If interested feel free to make offer.
- 1 Replies
- 792 Views
-
Last post by fordrelic
Mon Jul 05, 2021 7:40 am
-
-
09-10 repro spark plug wrench
Replies: 4
by
Larry Debaugh » Fri Jul 02, 2021 5:15 pm
First post
Reproduction iron spark plug wrench. Exact copy of my original. Three available. $185 shipping included in the lower 48.
Last post
Hi…..if you make more let me know…..I have a 1910……Gary…1-408-722-0781
- 4 Replies
- 1588 Views
-
Last post by WorldChamp1914
Sun Jul 04, 2021 11:51 pm
-
-
For Sale - Stromberg OF Valves SOLD OUT
Replies: 4
by
Scott_Conger » Sat Jul 03, 2021 4:35 pm
First post
Both low speed and high speed valves available.
One of each with the later diamond knurling and two each with the more common straight knurling.
They require a lot of operations, take more time than I'd planned, and needle material isn't cheap. As a result, these are pricey beyond what I'd hoped.
Demand will dictate if these are ever offered...
Last post
Interested, if you make another run.
- 4 Replies
- 1034 Views
-
Last post by Burger in Spokane
Sun Jul 04, 2021 11:32 pm
-
-
SOLD Kerosene side and tailights
Replies: 5
by
Dropacent » Sun Jul 04, 2021 1:17 pm
First post
Sold, thanks! Some nice black lamps. I’ll describe each with price. All 4 at $250 delivered or priced separately. Ask any questions. Tmorsher@icloud.com is the only way to reach me. HAPPY 4th, get the T out ! 03D19715-D4F0-4042-9473-516BAA390A4A.jpeg
Last post
Sold, thanks!
- 5 Replies
- 927 Views
-
Last post by Dropacent
Sun Jul 04, 2021 7:01 pm
-
-
Torpedo gas tank
Replies: 3
by
Dollisdad » Tue Jun 01, 2021 1:45 pm
First post
Looking for either type. New or used.
Thanks. Tom
Last post
Thanks Kim
- 3 Replies
- 1638 Views
-
Last post by Dollisdad
Sun Jul 04, 2021 5:42 pm
-
-
Original explosion whistle for sale
by
Dropacent » Sun Jul 04, 2021 1:34 pm
$75 ppd to your door tmorsher@icloud.com is the only way to reach me. Thanks and don’t lose any fingers tonight ! Happy 4th 4BDD1CC6-C7A0-490C-8F3E-890E8C0A035F.jpeg 744BE717-418D-467E-83A0-A22B52E2DDBC.jpeg
- 0 Replies
- 665 Views
-
Last post by Dropacent
Sun Jul 04, 2021 1:34 pm
-
-
- 3 Replies
- 1053 Views
-
Last post by MAG
Sun Jul 04, 2021 8:42 am
-
-
FS TT Accessory Baily Brakes Price Reduction
Replies: 2
by
Andy Loso » Sat Jun 26, 2021 9:24 pm
First post
I have pair of Baily Accessory brakes for a TT. All I have is pictured. I see no repairs or breaks. $250 including the ride in the 48. Message me or email me at alosoatq.com. Thank you.
Last post
Hi, Andy. I'm making an offer by pm. Bob
- 2 Replies
- 1372 Views
-
Last post by tmodeldriver
Sun Jul 04, 2021 8:20 am
-
-
ZENITH S4BF ---ANY AVAIL ?
Replies: 3
by
John bevardos » Thu Jun 24, 2021 10:31 am
First post
Hello,
might be in the market for one with the adjustable jet. Thanks , John
Last post
Don
Pm..email sent.
John
- 3 Replies
- 1492 Views
-
Last post by John bevardos
Sat Jul 03, 2021 9:53 pm
-
-
NOS Champion X Priming Spark Plugs, set of 4
Replies: 10
by
Erik Larson - Idaho » Wed Jun 23, 2021 5:50 pm
First post
FOR SALE;
NOS Champion X priming cup spark plugs, set of 4, with the original boxes.
Plugs have all been tested. They have clearly never been used. The boxes are of course old, fragile, and missing pieces.
$730. As-is. Free shipping to the US.
Last post
I have one to sell. Make offer via email.
- 10 Replies
- 3130 Views
-
Last post by MAG
Sat Jul 03, 2021 9:07 pm
-
-
- 0 Replies
- 623 Views
-
Last post by KMcoldcars
Sat Jul 03, 2021 5:37 pm
-
-
F-S All brass E & J TAIL LIGHT sold pending payment
by
FATMAN » Sat Jul 03, 2021 1:56 pm
New from Gilbert metal prod. is the all brass E & J Tail lamp
bought for a customer but took so long to get here he sold the car, these take a long time on a waiting list so if you need one do not wait
these come with the burner cover but no burner so you will need to use your old one or find one from the dealers
375.00 plus postage
no p.m's
Bob...
- 0 Replies
- 698 Views
-
Last post by FATMAN
Sat Jul 03, 2021 1:56 pm
-
-
F-S All brass E & J TAIL LIGHT SOLD pending payment
by
FATMAN » Sat Jul 03, 2021 1:55 pm
New from Gilbert metal prod. is the all brass E & J Tail lamp
bought for a customer but took so long to get here he sold the car, these take a long time on a waiting list so if you need one do not wait
these come with the burner cover but no burner so you will need to use your old one or find one from the dealers
375.00 plus postage
no p.m's
Bob...
- 0 Replies
- 589 Views
-
Last post by FATMAN
Sat Jul 03, 2021 1:55 pm
-
-
1913 Windshield Wanted
Replies: 2
by
frontyboy » Wed Jun 30, 2021 8:28 pm
First post
Wanted: correct windshield for 1913 roadster. I have a restored 1914 windshield restored with new glass and in very nice condition. I will trade or sell mine. The windshield I want is the one with the piano hinge. I will purchase or trade.
frontyboy.2ho6 919-1949(Seattle)
Last post
Saw one on Aaca web site.
- 2 Replies
- 1057 Views
-
Last post by Dan Hatch
Sat Jul 03, 2021 10:58 am
-
-
WTS Low radiator hood
Replies: 3
by
Caswell » Thu Jul 01, 2021 12:47 pm
First post
For Sale, Original Ford Low radiator hood. Needs dents fixed and repaint, $250 shipped, lower 48, PayPal F&F.
Last post
Lower price, $200. Looks better in pictures than it does in your hands solid no rust but needs skim coat and working ,ripples and dents visible when you move it in the light.
- 3 Replies
- 1131 Views
-
Last post by Caswell
Sat Jul 03, 2021 8:10 am
-
-
SOLD 1908 patent Oil spout can SOLD
Replies: 1
by
Dropacent » Thu Jun 24, 2021 10:12 pm
First post
Sold, thanks! Real early 1908 patent oil can , Noera Mfg Waterbury, COnn. . Please email me at tmorsher@icloud.com , I do not get PMs or see messages here. Check , cash or PayPal works for us. Thanks! 74EB4CD2-6A1B-4205-A706-8BA929B260DE.jpeg 6109CF73-FB10-41D5-9D58-69A907C40830.jpeg A7A2CF9C-638B-45AD-A7E4-DF1187164816.jpeg...
Last post
Sold , thanks!
- 1 Replies
- 1137 Views
-
Last post by Dropacent
Sat Jul 03, 2021 2:04 am
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum