Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45151 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
- 2 Replies
- 396 Views
-
Last post by George House
Fri Aug 18, 2023 10:05 am
-
-
FS: Early (11-14?) Front Fender Headlamp Fork Brackets
Replies: 2
by
George House » Mon Aug 14, 2023 10:28 am
First post
Really nice ‘D’ area in which you insert carbide type headlamp forks. No wear where fender eye bolt rubbed. Top bracket has been wire brushed and osphoed. Only $75 each + the ride….. gwhouse731(at)gmail(dot)com
Last post
SOLD… thank you Harvey and MTFCA !!😃
- 2 Replies
- 413 Views
-
Last post by George House
Fri Aug 18, 2023 10:03 am
-
-
- 6 Replies
- 515 Views
-
Last post by Don ellis
Fri Aug 18, 2023 8:18 am
-
-
(Sold) Fordor Body
Replies: 2
by
Kenny Edmondson » Thu Aug 17, 2023 2:11 pm
First post
1924 Fordor body for sale. Rewooded with Fordwood kit. All parts for the body are included. All metal was rust free and is now sandblasted. New rear fenders, running boards and splash aprons will go with the body as well. I have a Title also. Losing my butt on this deal, but I can’t seem to get back on it and need the room. $2500. Message with any...
Last post
I am interested, just want to ask a few questions.
- 2 Replies
- 440 Views
-
Last post by bryan831daniel
Thu Aug 17, 2023 8:52 pm
-
-
Magneto Post needed
Replies: 4
by
DavidGMeier » Thu Aug 17, 2023 2:13 pm
First post
I am needing a Magneto Post for my 1919 Model T. When it was purchased from a neighbor, it didn't have a Magneto post, the spot where the post would go is capped off.
Last post
David,
I’d sell you this perfectly made repro mag Post I just removed - for what the vendors charge. The gasket is attached and includes the 3 screws. It worked great and my roadster ran strong on mag, I removed it to install this extremely poorly made mag post with an outside oil line. See how I had to grind on it to make it fit? I have original...
- 4 Replies
- 333 Views
-
Last post by George House
Thu Aug 17, 2023 3:41 pm
-
-
rebuilt rucktells
by
dinosbunny » Thu Aug 17, 2023 3:19 pm
Just passing this along, have nothing to do with the post but its one hell of a good price. Model T Ford Club of Facebook
Larry Reed · ·
Went thru some of my collection today and found 2 rebuilt Ruckstel rear ends rebuilt by Eric Barrett! They were rebuilt using the later shifter and a 1913-1914 rear ended half. Eric is great on theses. They have...
- 0 Replies
- 527 Views
-
Last post by dinosbunny
Thu Aug 17, 2023 3:19 pm
-
-
FS Samson Lion Ahooga Horn(SOLD)
Replies: 3
by
ThreePedalTapDancer » Wed Aug 16, 2023 5:58 pm
First post
Nice Original Samson Lion ahooga horn. Polished brass 5 inch diameter bell. 9.5 length. Black paint on steel body. No dents or damage. Very loud “AHOOGA!” when plunger is pressed. Ready to mount and use. Tone is adjusted by tension screw on bell. Very clean. 325 includes shipping.
IMG_8748.jpeg
Last post
Thanks, I've brought alot of parts in the past from here, and had great success and service from like minded guys enjoying the hobby. I really appreciate it, and has helped me with my T's. Thanks Chris Lawrence NZ
- 3 Replies
- 470 Views
-
Last post by Lawrence
Thu Aug 17, 2023 3:16 pm
-
-
FS VINTAGE VIAGRA (SOLD)
Replies: 2
by
Mark Chaffin » Thu Aug 17, 2023 11:19 am
First post
Be the envy of all your friends by having the biggest oil sight gauge on the block! Size does matter! 😀 $50.00 with free domestic shipping included. Mark Chaffin (951) 805-0928 SOLD
20230817_081456.jpg
Last post
We've been bombarded with bogus users and posts by AI bots so I thought this was one of them.
Funny.
Chris
- 2 Replies
- 618 Views
-
Last post by ChrisB
Thu Aug 17, 2023 12:56 pm
-
-
FS-STARTER BENDIX
Replies: 6
by
John iaccino » Tue Aug 15, 2023 4:58 pm
First post
Starter bendix $35 plus flat rate shipping. USA only
Last post
That's okay, I don't think they're supposed to. (Sorry, couldn't help myself)
- 6 Replies
- 589 Views
-
Last post by Tadpole
Thu Aug 17, 2023 11:15 am
-
-
WTB Short Champion X Bases
Replies: 2
by
Tadpole » Thu Aug 10, 2023 8:20 am
First post
Looking to buy usable shorty Champion X spark plug bases and collar nuts. Finish doesn't matter but it would be nice to find some without heavy pitting. I would also be interested in whole assembled plugs. Send an email to the my posted address below. Thanks! (Picture for reference pulled from glue-gol)
Last post
Recieved your plugs Mr. Debaugh, they will do nicely. Thank you again!
- 2 Replies
- 495 Views
-
Last post by Tadpole
Thu Aug 17, 2023 7:28 am
-
-
WANTED TO BUY TT Truck Tail Light Bracket
Replies: 6
by
J1MGOLDEN » Tue Jul 11, 2023 7:58 am
First post
Wanted, a Cast Iron Tail Light Bracket, with or without the license plate bracket that looks like this one. Jim Golden, Bowie, MD
Tail Light Top.jpg
Tail Light Side.jpg
Last post
Yes, and a 1920 Ford Parts book notes the light is correct 1915 to 1920.
Tail Lights On Small.jpg
- 6 Replies
- 697 Views
-
Last post by J1MGOLDEN
Wed Aug 16, 2023 6:20 pm
-
-
Scandinavia band linings - sold
Replies: 6
by
Arbs » Tue Aug 15, 2023 5:53 pm
First post
Sold - Set of 3 Scandinavia band linings. Look to be in nice shape. Flexible, not brittle. Got them at an auction and ended up not using them. Passing them on at my cost. $65 plus shipping.
Measured in inches
Last post
Excellent!
I wasn't sure if that was what I was seeing or not
- 6 Replies
- 561 Views
-
Last post by Scott_Conger
Wed Aug 16, 2023 5:48 pm
-
-
Trade Parts lot for Rajo BB
Replies: 8
by
FlyingMerkel » Fri Aug 04, 2023 1:52 pm
First post
I’m building a speedster engine, and with it came a truckload of good parts. I’d like to trade the rest of the parts for a useable Rajo BB head. I’m located in Santa Cruz California.
Last post
I would like the price for the deep sump four dip pan. Tom
- 8 Replies
- 1029 Views
-
Last post by elliott1936
Wed Aug 16, 2023 4:02 pm
-
-
FS Nickel plated brass robe rail
Replies: 1
by
Allan » Wed Aug 16, 2023 3:22 am
First post
Solid brass. Use as is or strip and polished the brass. 28 wide, complete with mounting screws $85 including postage to your door.
Allan from down under. 20230516_171440.jpg
Last post
I want it……cm1914@verizon.net
- 1 Replies
- 363 Views
-
Last post by WorldChamp1914
Wed Aug 16, 2023 12:33 pm
-
-
FS MORE STUFF
Replies: 7
by
Mark Chaffin » Tue Aug 15, 2023 6:30 pm
First post
Another assortment of goodies. Description, prices and domestic shipping as indicated below. Mark Chaffin (951) 805-0928
Lugs 1.jpg
Lugs 2.jpg
You can be the wheel lug king. An assortment of hard to find JAXON and KELSEY wheel lugs and lug bolts. Get the entire lot for $100 plus $18.50 domestic shipping. SOLD
Frames.jpg
An assortment of...
Last post
I left a voicemail on the wheel lugs.
Harry
- 7 Replies
- 875 Views
-
Last post by Harry Lillo
Wed Aug 16, 2023 11:41 am
-
-
Warford drive shaft
Replies: 2
by
Erik Barrett » Tue Aug 15, 2023 3:27 pm
First post
I have available a shortened drive shaft, torque tube and radius rods for a KC Warford or original Warford that is 12” long. $500. I get that much to shorten the driveshaft and tube. The radius rods are a bonus.
Last post
Email sent
- 2 Replies
- 558 Views
-
Last post by themadmodelt
Wed Aug 16, 2023 10:38 am
-
-
FS-FAN HUBS
Replies: 3
by
John iaccino » Tue Aug 15, 2023 4:37 pm
First post
fan hubs. $12 each plus flat rate shipping. USA only
Last post
A=5/8, B&C=1/2, D=5/8
- 3 Replies
- 393 Views
-
Last post by John iaccino
Wed Aug 16, 2023 9:14 am
-
-
Bevin Bermuda Carriage Bell (SOLD pending)
Replies: 2
by
ThreePedalTapDancer » Tue Aug 15, 2023 6:22 pm
First post
Original T era Bevin Bermuda Carriage Foot Bell. This is an original heavy cast brass bell with nickel plate. Nice clean condition with a warm worn patina. It works great and has a very loud DING DONG! when plunger is depressed. 6 inch diameter. Ready to use, lots of fun. 275 includes shipping.
IMG_8732.jpeg
Last post
I will take it if he does not....Thank you...Bryan T.
- 2 Replies
- 413 Views
-
Last post by bdtutton
Tue Aug 15, 2023 10:05 pm
-
-
WTB Kingston High Bridge coil units - original maybe repro
by
TRDxB2 » Tue Aug 15, 2023 8:40 pm
Submitting for a friend who needs several to complete a build & bring another up to spec. Realize that Lang's has very nice repro's but original, restored or un-restored my be out there looking for a permanent home for another 100 years.
-
IMG_5096.JPG Originals
--
repro at Lang's
high 2.jpg
- 0 Replies
- 277 Views
-
Last post by TRDxB2
Tue Aug 15, 2023 8:40 pm
-
-
Step plates for my 1919 Model T Touring
by
DavidGMeier » Tue Aug 15, 2023 3:19 pm
Looking for two step plates for my 1919 touring… they need to match my current one that has two screw holes, large ‘Ford’ and wraps around the edge of the running board… Anyone have some spares?
- 0 Replies
- 196 Views
-
Last post by DavidGMeier
Tue Aug 15, 2023 3:19 pm
-
-
WTB: Radiator cap
Replies: 5
by
Apis Mellifera » Mon Aug 14, 2023 4:47 pm
First post
Looking for a usable and affordable radiator cap. Prefer some wear and tear to match the rest of the car. Shipping to WV.
Thanks
Last post
Many thanks to Frank. I think I have a cap sorted.
- 5 Replies
- 503 Views
-
Last post by Apis Mellifera
Tue Aug 15, 2023 3:02 pm
-
-
(SOLD)model T keys For Sale
Replies: 4
by
fordrelic » Tue Aug 15, 2023 9:35 am
First post
For Sale 7 keys for $60 includes priority shipping.
ford keys.jpg
54 after market round top
55 after market round top Works with some of new switches
62 Ford Script
66 Ford Script
68 Ford Script
71 Ford Script
72 Ford Script
Last post
Check’s away!!
- 4 Replies
- 342 Views
-
Last post by Ron Horton
Tue Aug 15, 2023 2:51 pm
-
-
Wanted - Original set of Scandinavia cotton linings for 26 Model T
Replies: 1
by
T. R. Quick » Mon Aug 14, 2023 10:36 pm
First post
Looking for original, not later year set of woven cotton transmission band linings
Last post
Tom
be aware that old cotton linings shrink, and you don't want to purchase one of those unless you're creative with a set of rolls to moosh them back out, and two, don't even consider purchasing a set from the SE or MidWest where there is high humidity. They'll look great but likely be rotten.
Good Luck
- 1 Replies
- 312 Views
-
Last post by Scott_Conger
Tue Aug 15, 2023 1:36 pm
-
-
FS MISCELLANEOUS
Replies: 5
by
Mark Chaffin » Mon Aug 14, 2023 8:12 pm
First post
Miscellaneous items as indicated below. Mark Chaffin (951) 805-0928
1914 Model G.jpg
1914 Holley G carburetor and manifold $50.00 plus $21.50 domestic shipping.
Aermore.jpg
Aermore Exhaust Whistle with cutout $125.00 plus $21.50 domestic shipping. SOLD
Champion.jpg
Champion X Spark Plug set used $40.00 plus $8.50 domestic shipping....
Last post
E-mail sent.
- 5 Replies
- 693 Views
-
Last post by Bill Everett
Tue Aug 15, 2023 4:24 am
-
-
FS BATTERY HORN (SOLD)
Replies: 2
by
Mark Chaffin » Mon Aug 14, 2023 7:54 pm
First post
Very nice battery horn with mounting bracket. Works well $100 plus domestic shipping. Mark Chaffin (951) 805-0928 SOLD
Horn 1.jpg
Horn 2.jpg
Last post
This is another live and learn for me. Most of our Canadian sourced electric horns are Ames made. First time I have ever seen an EA T model horn. EA was a prominent supplier of A model aoogah horns.
Allan from down under derived.
- 2 Replies
- 330 Views
-
Last post by Allan
Tue Aug 15, 2023 12:57 am
-
-
FS ATWATER KENT COIL WITH SWITCH
Replies: 1
by
Mark Chaffin » Sun Aug 13, 2023 10:50 pm
First post
Rare accessory Atwater Kent Type F coil with kicker switch for distributor. Missing key. States new coil installed 08/01/01. Price was $275 now $200 plus domestic shipping. Mark Chaffin (951) 805-0928
20230813_193919.jpg
20230813_193939.jpg
20230813_194000.jpg
20230813_194019.jpg
Last post
Last call $200 plus shipping.
- 1 Replies
- 329 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 11:41 pm
-
-
- 0 Replies
- 291 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 8:08 pm
-
-
FS EARLY FENDER BRACKET SET
by
Mark Chaffin » Mon Aug 14, 2023 8:02 pm
One set of early front fender brackets $80.00 plus $20.00 domestic shipping. Mark Chaffin (951) 805-0928
Fender Brackets 1.jpg
Fender Brackets 2.jpg
- 0 Replies
- 259 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 8:02 pm
-
-
FS SWITCH ASSEMBLIES
Replies: 1
by
Mark Chaffin » Mon Aug 14, 2023 7:59 pm
First post
Various switch assemblies as indicated below. Mark Chaffin (951) 805-0928
Early Switch 1.jpg
Early Switch 2.jpg
Early cast handle switch assembly $50.00 plus $8.50 domestic shipping. SOLD
2627 Chrome Switch 1.jpg
2627 Chrome Switch 2.jpg
26/27 switch assembly without ammeter $45.00 plus $8.50 domestic shipping. SOLD
Last post
2627 Switch 1.jpg
2627 Switch 2.jpg
26/27 switch assembly for non-generator car $35.00 plus $8.50 domestic shipping
- 1 Replies
- 384 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 8:00 pm
-
-
FS HEADLIGHT SET (SOLD)
by
Mark Chaffin » Mon Aug 14, 2023 7:56 pm
Very nice headlight set with Spreadlight lenses $150 plus domestic shipping. Mark Chaffin (951) 805-0928 SOLD
Headlights 1.jpg
Headlights 2.jpg
- 0 Replies
- 319 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 7:56 pm
-
-
FS EARLY COIL BOX (SOLD)
by
Mark Chaffin » Mon Aug 14, 2023 7:52 pm
Early coil box $50.00 plus domestic shipping. Mark Chaffin (951) 805-0928 SOLD
Coil Box 1.jpg
Coil Box 2.jpg
Coil Box 3.jpg
Cox Box 4.jpg
- 0 Replies
- 329 Views
-
Last post by Mark Chaffin
Mon Aug 14, 2023 7:52 pm
-
-
WTB Boyco Can Lids
Replies: 8
by
DontKnowMuch » Sun Aug 13, 2023 6:56 pm
First post
I would like to buy some Boyco Gas, Oil, and Water can lids. Do you know a source?
Do you know what size these lids are - diameter and thread? I have seen some suggestions in previous posts, but I have not been successful in finding lids that fit my cans?
Thanks
Last post
How about these folks?
- 8 Replies
- 787 Views
-
Last post by Jerry VanOoteghem
Mon Aug 14, 2023 7:37 pm
-
-
Sold - Atwater-Kent distributors and parts lot
Replies: 3
by
JunkyJud » Sun Aug 13, 2023 4:06 pm
First post
For sale is a parts lot that includes two Atwater-Kent distributors, a Spad timer, Ford plugs, and other parts as seen in the photos. $70 shipped.
Last post
Justin, Thanks I just see your info in my MTFCA messages, will send out tomorrow, Thank you George
- 3 Replies
- 376 Views
-
Last post by George Hand
Mon Aug 14, 2023 6:49 pm
-
-
WTB TT Steel Cab Door Access Panels
Replies: 1
by
Tadpole » Mon Jun 26, 2023 3:32 pm
First post
I am hunting a pair of these small square access panels for a steel closed cab TT. Attached is a photo with the part I am looking for circled as well as my email. Thank you!
Last post
Tad,
I have one in very nice condition (looks new) has original green paint on the inside. $25.00 plus USPS flat rate carton.
Provide a text number, and I'll forward a photo.
Jack Leonhardt
920-2261005
- 1 Replies
- 375 Views
-
Last post by 26modeltt
Mon Aug 14, 2023 5:41 pm
-
-
WTB TT Cowl Vent
Replies: 2
by
Jacob Mangold » Mon Aug 14, 2023 12:31 am
First post
I’m trying to help someone on FB find a cowl vent for what looks like a 1926 TT. If you have one, leave your info so I can hand it off to the person I’m trying to help.
Thanks, Jacob Mangold
Last post
Ok I will let them know
- 2 Replies
- 300 Views
-
Last post by Jacob Mangold
Mon Aug 14, 2023 3:12 pm
-
-
FS- Delco distributor
Replies: 1
by
t-time » Wed Aug 09, 2023 5:44 pm
First post
Delco distributor missing the points housing, cap, rotor and lower shaft cap. Has the drive gears. Small chip in the housing where it mounts on the timing cover, can be seen in photo. Centrifugal advance, everything moves. $50 + $15 shipping.
Last post
New price $40 + $15 shipping
- 1 Replies
- 437 Views
-
Last post by t-time
Sun Aug 13, 2023 7:15 pm
-
-
Sold: Various New Model T Repair Parts
Replies: 2
by
Horsehead » Sun Aug 13, 2023 3:36 pm
First post
$80 buys all of the following new parts in their original packaging. Add $22.80 for a large flat rate box.
ITEM/QUANTITY/PART NUMBER/YEAR/CATALOG PRICE:
Owner's Plate 1 09-27 $8.00
Complete Felt Set 1 09-27 $13.00
Manifold Nut Lock Clamp 1 09-27 $5.00
Drive Shaft Bushing 1 T-2581 09-27 $9.00
Sediment Bowl Gasket 1 T-2905-B 26-27...
Last post
John, If Joe does not want this I will Take them. George Hand gwh247@yahoo.com
- 2 Replies
- 512 Views
-
Last post by George Hand
Sun Aug 13, 2023 5:14 pm
-
-
- 0 Replies
- 449 Views
-
Last post by Nv Bob
Sun Aug 13, 2023 3:23 pm
-
-
Sold: Differential Housings
by
Horsehead » Sun Aug 13, 2023 11:12 am
2-piece differential housings with spiders and 3 gears.
10 ring bolts and 3 housing bolts also included.
A is pre-14 (SOLD)
The other four are post-14
Specify the one you want (e.g., A, B, C, D or E)
$25 each plus $17.10 for a medium FRB
Paypal (include your address) or check
- 0 Replies
- 363 Views
-
Last post by Horsehead
Sun Aug 13, 2023 11:12 am
-
-
sold Tool for broken axle rare with bearings
Replies: 1
by
FATMAN » Wed Aug 09, 2023 3:01 pm
First post
This is a rare tool to find, if you break a rear axle you clamp this on to the housing and put another wheel on the shaft to roll the car this one has the bearing type spindle that turns 400.00 plus post, Bob 815-633-7244
modelt2001@comcast.net
sold
Last post
PRICE DROP 325.00
- 1 Replies
- 620 Views
-
Last post by FATMAN
Sun Aug 13, 2023 10:52 am
-
-
wtb brass radiator
by
fordrelic » Sun Aug 13, 2023 10:05 am
Anyone have a usable brass radiator for 1914 T.
Looking for something I could afford for a hill climber.
- 0 Replies
- 288 Views
-
Last post by fordrelic
Sun Aug 13, 2023 10:05 am
-
-
- 0 Replies
- 284 Views
-
Last post by Nv Bob
Sat Aug 12, 2023 9:06 pm
-
-
1913 Rubes Horn(SOLD)
Replies: 1
by
ThreePedalTapDancer » Sat Aug 12, 2023 8:21 pm
First post
Original late 1912 - 1913 Rubes brass horn. Nice original condition. No cracks or serious dents, but two small dings evident. Correct round mounting bracket. Hard to find nice original. 300 includes shipping U.S.
IMG_8701.jpeg
Last post
Ed, I'd sure like to purchase this, please - email sent
thank you
- 1 Replies
- 300 Views
-
Last post by Scott_Conger
Sat Aug 12, 2023 8:29 pm
-
-
Wanted Model T Wishbone
Replies: 3
by
Kuffs565 » Fri Aug 04, 2023 1:59 am
First post
I'm looking for a front wishbone (front radius rod) that will fit my 1923 Model T Runabout Roadster front axle. I found a possible part number 2733B but not sure if that's correct. I'm having a hard time finding one. Anyone point me in the right direction or have one for sale? I need the left and right front spring perches also but I can buy them...
Last post
Good transaction. That’s what this site is for. T wishbones aren’t rare. I have 9-10 but I’m in south central Texas. I even cut one up to augment the over-axle wishbone on my ‘14. Safety precaution.
- 3 Replies
- 576 Views
-
Last post by George House
Sat Aug 12, 2023 6:31 pm
-
-
Want to buy
Replies: 3
by
Dollisdad » Fri Aug 11, 2023 5:23 pm
First post
Headlight forks 09-10 or 11-14. Either ones will work.
11-14 frame to firewall brackets.
Thanks Tom
Last post
Thanks everyone. I found what i need.
t
- 3 Replies
- 627 Views
-
Last post by Dollisdad
Sat Aug 12, 2023 3:33 pm
-
-
Steel Truss Head Rivets 3/16" x 1 1/4"
Replies: 6
by
Rodger Erickson » Fri Feb 10, 2023 10:57 am
First post
Free: I still have a whole bunch of Truss Head (or mushroom head or brazier head) rivets, with a 3/16 x 1 1/4 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or depot...
Last post
Got more of these if anyone's interested.
- 6 Replies
- 934 Views
-
Last post by Rodger Erickson
Sat Aug 12, 2023 11:55 am
-
-
WTB front white floor mats
by
Psainslie » Sat Aug 12, 2023 7:11 am
WTB 2 NOS or gently used front white floor mat for 1911 open touring the thicker more substantial mat—Not one of the “newer” ones available now from suppliers.
- 0 Replies
- 433 Views
-
Last post by Psainslie
Sat Aug 12, 2023 7:11 am
-
-
SOLD - 1925 Model T Truck Bed - For Sale
Replies: 5
by
Modeltkc » Tue Aug 08, 2023 3:45 pm
First post
The truck bed SOLD 8-11-2023
Model T Truck bed for sale.
I do not know the year cut offs, but happy to supply more photos via E mail or text to further identify.
This was originally intended for a 1923-25 roadster build that did not materialize.
The bed is in extremely good shape - there is zero through rust (a little surface here and there as...
Last post
Thank you everyone for the help - Someone somewhat local to me bought the truck bed and will hopefully be putting it to good use.
- 5 Replies
- 802 Views
-
Last post by Modeltkc
Fri Aug 11, 2023 3:49 pm
-
-
FS Accessory Brass Waterpump (SOLD)
Replies: 1
by
ThreePedalTapDancer » Fri Aug 11, 2023 2:12 pm
First post
Here is an original cast brass accessory Nims Water Pump. This pump is in very nice, near NOS condition, with no discernible wear, no play, and very smooth. It has a beautiful twist brass grease cup and a new aluminum pulley. Ready to install and use. 225 includes shipping.
IMG_8669.jpeg IMG_8687.jpeg
Last post
IMG_1463.jpeg IMG_1464.jpeg
- 1 Replies
- 263 Views
-
Last post by ThreePedalTapDancer
Fri Aug 11, 2023 2:15 pm
-
-
WTB RAJO C-35
Replies: 1
by
Jonny Eriksson » Tue Aug 08, 2023 4:06 am
First post
I´m looking for a Rajo C35 Model T overhead valve cylinder head.
Kind regards,
Jonny Eriksson
Last post
Jonny
I have a RAJO C35 complete with Intake manifold! This head has been gone through completley and has the majority of the valve train replaced.
I have forgotten exactly what parts have been replaced, but when I check I can tell. The head is in storage presently, but when I get it out I can tell exactly. Please call me at 563-380-6230 if you...
- 1 Replies
- 438 Views
-
Last post by Bill Kerndt
Fri Aug 11, 2023 10:55 am
-
-
Model A roadster top iron brackets fs
by
CTLeonard » Fri Aug 11, 2023 10:41 am
Have the top iron brackets mounts fs. Had some cast for a project and have a few left over. 130.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20230811_092440430.jpg IMG_20230811_092412806.jpg IMG_20230811_092421300.jpg IMG_20230811_092428731.jpg
- 0 Replies
- 216 Views
-
Last post by CTLeonard
Fri Aug 11, 2023 10:41 am
-
-
For Sale Model T Coil Point Adjustor Springs
Replies: 2
by
Ron Patterson » Wed Aug 09, 2023 7:32 pm
First post
I recently obtained this lot of Model T coil point mounting springs in a purchase of other items from the current manufacturer of KW coils made in the 1940-1980’s & black plastic coils that has recently ceased production. They are made specifically for these coils but can also be used rebuilding original Ford and aftermarket ignition coils. There...
Last post
I love the humour on this Classified's Section ! -Dusty
- 2 Replies
- 607 Views
-
Last post by DustySpokes
Thu Aug 10, 2023 10:35 pm
-
-
Wanted 280 cam
Replies: 1
by
Rod » Thu Aug 10, 2023 1:02 pm
First post
Does anyone have a new 280 cam for sale?
Thanks,
Rod Barrett
Cell 317-201-6524
Last post
FWIW - Chaffin's Garage offers regrinds which folks speak very highly of.
- 1 Replies
- 363 Views
-
Last post by Scott_Conger
Thu Aug 10, 2023 8:10 pm
-
-
FS: Professionally Restored License Plate
Replies: 1
by
George House » Wed Aug 09, 2023 10:31 am
First post
:oops: Verified w/ ‘Kayla’ at TX DMV that Texas is a 1 antique license plate state and this plate isn’t registered. Only $90 + mailing…gwhouse731(at)gmail(dot)com
Last post
Sold ! Thank you Dennis and MTFCA 😜
- 1 Replies
- 482 Views
-
Last post by George House
Thu Aug 10, 2023 7:34 pm
-
-
Sold 1912 Touring rear fender irons 1 pair
Replies: 2
by
FATMAN » Thu Aug 10, 2023 4:03 pm
First post
nice pair of original cast rear fender irons or brackets for 1912
65.00 plus postage
815-633-7244
modelt2001@comcast.net
no p.m.'s please
Last post
Sold thank you,Bob
- 2 Replies
- 332 Views
-
Last post by FATMAN
Thu Aug 10, 2023 7:17 pm
-
-
For Sale: 1911-1917 Spindles
Replies: 6
by
Ed Fuller » Fri Jul 21, 2023 9:39 pm
First post
Pair of 1911-1917 style spindles. Will need new bushings. Both have grooves from bearings. Threads are a little worn but bearings thread on.
$50 plus shipping in the U.S.
IMG_2237.jpeg
IMG_2238.jpeg
IMG_2240.jpeg
IMG_2239.jpeg
Last post
Spindles are sold.
- 6 Replies
- 944 Views
-
Last post by Ed Fuller
Thu Aug 10, 2023 5:24 pm
-
-
FS WINGS AND THINGS
Replies: 3
by
Mark Chaffin » Thu Aug 03, 2023 5:33 pm
First post
Nice original large brass flip top wing radiator cap was $100 NOW $80.00 with free domestic shipping. Mark Chaffin (951) 805-0928
Wings 1.jpg
Wings 2.jpg
Small radiator cap with wings and eagle $50 SOLD with free domestic shipping.
Wings 3.jpg
Last post
Hi Mark,
It arrived in todays mail in great shape
Thanks again,
Scott
- 3 Replies
- 747 Views
-
Last post by South park zephyr
Thu Aug 10, 2023 2:00 pm
-
-
Wanted Upholstery Kit 1927 Coupe
Replies: 4
by
RichardW » Sat Jul 29, 2023 10:55 am
First post
Wanted Upholstery Kit for 1926 Model T Coupe. From Classtique Upholstery If you have one you don't need or have one on order that you don't want, please contact me. I need one hopefully sooner than their production can provide.
Thanks for your help
Richard Williamson
352 843 1530
rwill1914@aol,com
Last post
Mike posted on Facebook a few days ago that he is running behind and will be skipping attendance of few upcoming shows in order to stay in the shop and catch up.
Just one of the challenges of being the best in your field (like Stan Howe, RIP).
- 4 Replies
- 579 Views
-
Last post by CudaMan
Thu Aug 10, 2023 1:28 pm
-
-
FS: TT Brake Shoes
Replies: 2
by
George House » Wed Aug 09, 2023 10:47 am
First post
Only $90 + shipping each. Probly USPS small.
Pair on left still has lining. Pair on right has very light pitting but neither has cracks or welds.
gwhouse731(at)gmail(dot)com
Last post
Thank you Bob and MTFCA. I’ll box ‘em up this morning 😊
- 2 Replies
- 366 Views
-
Last post by George House
Thu Aug 10, 2023 7:06 am
-
-
FS- Ford script drum tail light housing - SOLD
Replies: 3
by
t-time » Wed Aug 09, 2023 5:50 pm
First post
Nickel Ford script tail light housing Overall nice with a little discoloring of plating and brass showing through on script. No cracks or dents. $45 + $5 shipping.
Last post
sold to Brent.
- 3 Replies
- 470 Views
-
Last post by t-time
Wed Aug 09, 2023 7:38 pm
-
-
# 4 master key $11
Replies: 6
by
fordrelic » Sun Jul 23, 2023 3:41 pm
First post
1 number 4 master key works on 69,70,71,72,73,74.
$11 includes shipping to lower 48.
Thanks
Last post
Clay,
Check will be in the mail in the morning.
Thanks,
Don
- 6 Replies
- 502 Views
-
Last post by Don Demio
Wed Aug 09, 2023 5:28 pm
-
-
- 2 Replies
- 314 Views
-
Last post by JTT3
Wed Aug 09, 2023 4:01 pm
-
-
TT Snow Flyer FS
by
Nv Bob » Wed Aug 09, 2023 3:04 pm
Get ready for year around fun
Rebiult ready to be enjoyed
Asking 13500 obo
NvBob
Jalopyt@yahoo.com
Sparks Nv
- 0 Replies
- 397 Views
-
Last post by Nv Bob
Wed Aug 09, 2023 3:04 pm
-
-
FS: Oval Gas Tank Brackets
Replies: 1
by
George House » Wed Aug 09, 2023 10:26 am
First post
Have 2 pair. Only $40 pr. + mailing. Not being reproduced. gwhouse731(at)gmail(dot)com
Last post
Gas tank brackets spoken for. Thanks Richard and MTFCA !🙏
- 1 Replies
- 214 Views
-
Last post by George House
Wed Aug 09, 2023 1:18 pm
-
-
FOR SALE - BRASS RUNNING BOARD SPARE TIRE MOUNTING BRACKET
Replies: 1
by
Jay In Northern Ca. » Tue Aug 08, 2023 10:53 pm
First post
This is a nice period cast brass spare tire bracket to strap a spare tire to the running board in conjunction with a holder for the top of the tire. Asking $60 plus postage.
brass tire running board holder 1.jpg brass tire running board holder 2.jpg
Please reply to the email address below and NOT the personal messaging system to contact me,...
Last post
E-mail sent.
- 1 Replies
- 441 Views
-
Last post by Bill Everett
Wed Aug 09, 2023 12:47 pm
-
-
Wtb Wide track rear fenders 13-14 touring
Replies: 1
by
Jeepster47 » Sun Aug 06, 2023 9:42 pm
First post
I know rootlieb makes new wide track fenders but I thought I’d see what’s out there. Have an early (March) 14 touring wide track. My rear fenders are not salvageable so I’d like to find a good original 13-14 set. I’ll order new ones if I have to but would like to see what’s out there before I make my decision to order new ones . Thanks
Last post
Matthew,
Give me a call at 936- four four three - eight zero zero six. I might have a lead for you.
Bill
- 1 Replies
- 285 Views
-
Last post by bill_severn
Wed Aug 09, 2023 12:03 pm
-
-
FS 1913 REAR BODY SIL SUPPORT BRACKET SET (NOS)
Replies: 6
by
Mark Chaffin » Tue Aug 08, 2023 7:27 pm
First post
1913 touring rear body support bracket set NOS. These were provided by the factory add on to support the rear body and to keep it from sagging. Price is $100 plus domestic shipping. Mark Chaffin (951) 805-0928.
20230808_162206.jpg
Last post
They are going to go on an early 13 touring I bought a winter ago. It is in the serial number 192xxx range. It has the narrow sills on it and doesn’t have the reinforcement brackets already in it. I’ll also put the two rivet frame bracket on it also the later 13 have if I can ever find a set.
- 6 Replies
- 601 Views
-
Last post by Model T Mark
Wed Aug 09, 2023 11:50 am
-
-
FOR SALE - 1909-16 BRASS HUB FAN COMPLETE SETUP READY TO BOLT ON
Replies: 2
by
Jay In Northern Ca. » Tue Aug 08, 2023 9:09 pm
First post
This is a excellent original fan setup complete and ready to install once lubed up. The hub has a good crown to it and the shaft has a minimum of play without grease. Asking $145 plus postage. SPOKEN FOR!!!
Brass hub fan 1.jpg Brass hub fan 2.jpg Brass hub fan 3.jpg
Please reply to the email address below and NOT the personal messaging system...
Last post
Jay, did you take that one off and upgrade to a new plastic fan as posted recently. Don't you know this one is likely to throw a blade off and take out the radiator? :D :D :D
Allan from down under.
- 2 Replies
- 457 Views
-
Last post by Allan
Wed Aug 09, 2023 8:14 am
-
-
FOR SALE - COILBOX SWITCH LOCK NEW OLD STOCK IN THE ORIGINAL BOX.
Replies: 1
by
Jay In Northern Ca. » Tue Aug 08, 2023 8:49 pm
First post
This is a old school hinged coil switch cover that allows you to padlock the coil switch on 1913 to 1918 Model T Coil box's. When unlocked it is easy to remove or install with the three switch cover plate screws. In my many years of collecting Model T accessories this is the only one of these I have ever seen in any condition. Asking $75 plus...
Last post
Jay,
I will take it.
- 1 Replies
- 388 Views
-
Last post by robert daniello
Tue Aug 08, 2023 10:55 pm
-
-
WTB Frontenac SOHC top cover
Replies: 18
by
Layden Butler » Sun Jan 05, 2020 9:35 pm
First post
OK original or new reproduction wanted, OR sell the project.
Last post
I found what I needed! No leads on another however.
- 18 Replies
- 3984 Views
-
Last post by Layden Butler
Tue Aug 08, 2023 7:41 pm
-
-
Sold: Pre-26 Brake Drum
Replies: 2
by
Horsehead » Mon Aug 07, 2023 6:08 pm
First post
With shaft, bushings and tight rivets. Light surface rust and blemishes.
No cracks or pitting. Six pounds, seven ounces.
$30 plus $17.10 for domestic shipping for one drum.
Two available. One is Ford script, the other is not.
Last post
Are they both sold?
- 2 Replies
- 357 Views
-
Last post by 1925 Touring
Tue Aug 08, 2023 7:19 pm
-
-
FS TIRES (NOT MODEL T)
by
Mark Chaffin » Tue Aug 08, 2023 5:31 pm
Two new in the wrapper Firestone White Wall tires 6.00 - 6.50 - 17. Coker Tire retail each $383. Get these for $100 each plus the ride. Mark Chaffin (951) 805-0928
20230808_142740.jpg
- 0 Replies
- 315 Views
-
Last post by Mark Chaffin
Tue Aug 08, 2023 5:31 pm
-
-
FS ACCESSORY SHOCK ABSORBERS (SOLD)
Replies: 1
by
Mark Chaffin » Tue Aug 08, 2023 3:44 pm
First post
Accessory shock absorber parts $20.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928
20230808_124159.jpg
Last post
sent pm I'll take them
- 1 Replies
- 364 Views
-
Last post by Tim D
Tue Aug 08, 2023 4:30 pm
-
-
Wanted Model T Wheels
Replies: 4
by
Kuffs565 » Mon Aug 07, 2023 2:31 pm
First post
Wanted set of Model T 23 inch wood demountable wheels that have been respoked. I'm in South Florida but may come pick them up or consider shipping.
Last post
23 inch demountable
- 4 Replies
- 612 Views
-
Last post by Kuffs565
Tue Aug 08, 2023 4:21 pm
-
-
How to comedy FIFA 23 Angel Cup admission aboriginal
Replies: 2
by
Steve Jelf » Tue Aug 08, 2023 10:40 am
First post
I'm commenting on this idiotic drivel just to bring it to the top. Don't want anybody to miss the foolishness. :D
Last post
When I was younger, we had a lot of those Alpha Football Crawling Admirers. Dad had a little place down in Southeast Tennessee, and it wouldn't grow much but firewood, so we cut and stacked cordwood in the summer to sell to the fancy folk in winter. The Alpha Crawling Football Admirers would hole up in the cordwood to get away from the frost, and...
- 2 Replies
- 407 Views
-
Last post by TXGOAT2
Tue Aug 08, 2023 4:19 pm
-
-
F-S THE NEW FORD-MODEL A FORD DEALER CATALOG
Replies: 3
by
FATMAN » Mon Aug 07, 2023 3:11 pm
First post
Back in the 1960's my mother and father started out Bob's Antique Auto Parts
they sold Model T and Model A Ford parts in this time my father found a original dealers' catalog for the 1929 The New Ford about the cars and trucks, he wrote Ford Motor company and got permission to re print this large leather like covered book.
I just found upstairs in...
Last post
3 more are gone just a few left,Bob
- 3 Replies
- 337 Views
-
Last post by FATMAN
Tue Aug 08, 2023 2:16 pm
-
-
Sold: Old T Tools
Replies: 2
by
Horsehead » Mon Aug 07, 2023 5:58 pm
First post
One Mossberg #2679 7/8 and 15/16 double-ended socket wrench
One Mossber #624 5/8 ratchet
One Mossberg # 623 5/8 inch ratchet
One Walden-Worcester #8620 5/8 closed end wrench
One Walden-Worcester #VG3 valve grinding tool
$20 plus $17.10 for shipping
Last post
John
Paypal to lafalcejd@yahoo.com Then I'll ship.
Thanks
- 2 Replies
- 450 Views
-
Last post by Horsehead
Tue Aug 08, 2023 1:26 pm
-
-
Sold: Five Brass Holly Floats
Replies: 2
by
Horsehead » Mon Aug 07, 2023 6:22 pm
First post
OD on all five: 2 1/2 inches
ID on all five: 1 1/4 inches
Four are 1/2 inch high. The other is 3/4 inch high.
Not tested. Good hinges on all five.
Include some unopened Holly seals, pins and clips.
$25 plus $8.80 domestic shipping
Last post
Brendan
Paypal to lafalcejd@yahoo.com or check to John LaFalce 1114 Appalachee Drive, Huntsville, AL 35801
Thanks
- 2 Replies
- 340 Views
-
Last post by Horsehead
Tue Aug 08, 2023 1:23 pm
-
-
FS BRAKE SHOES
Replies: 1
by
Mark Chaffin » Tue Aug 08, 2023 12:07 pm
First post
Assortment of original emergency brake shoes $10.00 plus domestic shipping Mark Chaffin (951)805-0928
20230808_090419.jpg
Last post
20230808_094913.jpg
More
- 1 Replies
- 271 Views
-
Last post by Mark Chaffin
Tue Aug 08, 2023 12:50 pm
-
-
TT dump bed
Replies: 1
by
Gen3AntiqueAuto » Sat Aug 05, 2023 10:04 am
First post
Still have the 25-ish TT dump bed and the frame it came off of here - rear end was sold. Come make me an offer in MA...
Last post
bump to the top
- 1 Replies
- 379 Views
-
Last post by Gen3AntiqueAuto
Tue Aug 08, 2023 11:12 am
-
-
For Sale Fun Projects Strobo Spark Ignition Coil Tester.
Replies: 4
by
Ron Patterson » Mon Aug 07, 2023 6:22 pm
First post
Used unit in clean/excellent condition. In original shipping box including operating instructions. This unit provides tried and true coil testing capabilities. All features and functions tested and works as new. These are no longer made and hard to find. Price $275 including USPS shipping to USA mailing addresses. Ron Patterson 231-348-5085
Last post
The Strobo Spaek coil tester is sold.
Thanks
NTFCA Classifieds.
- 4 Replies
- 566 Views
-
Last post by Ron Patterson
Mon Aug 07, 2023 10:10 pm
-
-
Sale Ended: Five Kingston Carbs
by
Horsehead » Mon Aug 07, 2023 6:35 pm
L and L2 carbs for parts or repair...these are not working carbs.
Four have cork floats.
Sale includes assorted unopened and unused Kingston repair parts (see pics)
$125 plus $22.80 for domestic shipping.
- 0 Replies
- 306 Views
-
Last post by Horsehead
Mon Aug 07, 2023 6:35 pm
-
-
Seeking those who may need TW Rect. brush
Replies: 5
by
TWrenn » Sat Aug 05, 2023 8:39 am
First post
As the subject line says it all...I'm seeking out as many as possible of those of us who use, and swear by, NOT AT!! ha ha, the infamous TW timer, this time with the rectangular brush. I ran a good number of round brushes last winter, now it's time to attend to those of us who also use the rectangular brush. I have a similar post in the discussion...
Last post
Thanks, I see from your picture that what I have will not work.
- 5 Replies
- 444 Views
-
Last post by Mike Lebsack-Iowa
Mon Aug 07, 2023 2:58 pm
-
-
SOLD Sediment bowl reproduction
Replies: 1
by
TheSaintDiscJockey » Mon Aug 07, 2023 9:27 am
First post
Brass sediment bowl.
Reproduction.
Very good condition.
Does not have the draining petcock.
$40.00 plus shipping.
PM or text @ six zero nine nine two zero four two two zero.
Last post
I'll take it.
- 1 Replies
- 380 Views
-
Last post by Wkndead
Mon Aug 07, 2023 9:59 am
-
-
FS: “L” shaped spring shackles
Replies: 1
by
tselliott » Sun Jul 30, 2023 7:47 pm
First post
L shaped spring shackles for rebuilding.
4 front and 4 rear.
There is an extra 1/2 of a rear shackle that looks to have no wear.
$15 plus shipping.
The 1/2 of the good one should be worth that.
Scott
971-506-9402
Last post
New price, bump to the top
- 1 Replies
- 466 Views
-
Last post by tselliott
Sun Aug 06, 2023 4:31 pm
-
-
WANTED: 1913-1918 Runabout
Replies: 9
by
Stephen1915 » Wed Aug 02, 2023 12:09 pm
First post
Can’t post in the Auto Classifieds on mobile device.
WANTED: 1913-1918 Model T Runabout.
Various conditions considered. No rust buckets!!
Located in St.Louis Missouri, willing to travel far for a good car.
PLEASE call or text!
314-287-1901
Last post
here you go
- 9 Replies
- 860 Views
-
Last post by flatbroke3
Sun Aug 06, 2023 1:46 pm
-
-
Bushing Removal Tool FS
Replies: 1
by
Dan Hatch » Sun Aug 06, 2023 11:49 am
First post
Here is a #579 Combination Holley Bushing Extractor . Made by Rosier Howard Sales Company. See the label in pictures, which has instructions in it. Also list sizes of bushings it will work with.
Don’t think it has anything to do with the Holley carburetor company. $40 + shipping. Email me at address in pictures. Thanks Dan.
IMG_3016.jpeg...
Last post
Sold pending payment
- 1 Replies
- 448 Views
-
Last post by Dan Hatch
Sun Aug 06, 2023 12:13 pm
-
-
Free: 1/2" x 20 Fine Thread Nuts
Replies: 2
by
Rodger Erickson » Sat Aug 05, 2023 2:15 pm
First post
Free: steel hex nuts, size 1/2 x 20 Fine Thread, fits 3/4 wrench. Good quality never installed. They're not castellated but they're a fairly common Model T size. They're yours if you pay shipping (I can fit 4 Lbs, which is approx 120 bolts, into one USPS Priority Small Flat Rate Box.)
Sorry if this comes across as being off-topic but it seems...
Last post
Sent you an email.
- 2 Replies
- 397 Views
-
Last post by Charlie_26_TT_Ccab
Sun Aug 06, 2023 10:46 am
-
-
WTB early headlight forks & fender brackets
Replies: 1
by
blauvelt » Wed Aug 02, 2023 8:15 pm
First post
Would like to purchase a pair of early style headlight forks and front fender brackets. Thanks.
Last post
I have a number of early fender brackets. If you can identify the ones you need. I also have some headlight forks not sure how early they are.
frontyboy 2oh6-919-1949 test or phone.
- 1 Replies
- 383 Views
-
Last post by frontyboy
Sun Aug 06, 2023 12:14 am
-
-
26/26 parts FOR SALE
Replies: 1
by
frontyboy » Wed Aug 02, 2023 8:55 pm
First post
Cleaning out more stuff, 26/27 hogs head with lettered pedals installed, 26/27 Complete transmission, 26/27 relined scandia bands.Cheap make an offer I can't refuse. No takes he goes to the scrappers.
frontyboy text or call 2oh6-919-1949(Seattle)
Last post
Thanks MTFC forum sold to a Ford guy from Spokane.
frontyboy
- 1 Replies
- 585 Views
-
Last post by frontyboy
Sun Aug 06, 2023 12:11 am
-
-
Sold: Tool Kit
Replies: 1
by
Horsehead » Sat Aug 05, 2023 11:33 am
First post
Mid-20s tool kit (see pic).
Pump works.
All Ford script except the screwdriver, which has a square metal shank ending.
$125 plus shipping costs. Will ship on mounted board as shown in pics.
Last post
I will take it. Sent you an email
- 1 Replies
- 490 Views
-
Last post by MAG
Sat Aug 05, 2023 8:47 pm
-
-
26/27
Replies: 1
by
Gen3AntiqueAuto » Thu Aug 03, 2023 10:59 am
First post
Rebuilt Transmission - $2k no core needed - buyer to arrange transport or pick it up here. I'll strap it to a pallet for shipping if needed.
It's this exact transmission:
Engine (longblock) sold seperately, tranny is coming off because I forgot to put the oil tube in and not going back on after.
0.290, 0.040 over. $3k, same deal, pallet you...
Last post
Should I list this on ebay? I'd rather cut a couple bucks off over paying fees....
- 1 Replies
- 517 Views
-
Last post by Gen3AntiqueAuto
Sat Aug 05, 2023 8:05 pm
-
-
For Sale-new wire wheels
Replies: 3
by
Mike Lebsack-Iowa » Wed Aug 02, 2023 8:44 am
First post
I am taking orders for new McLaren wire wheels with free delivery to Hershey or any location along the way from Iowa to Hershey. I currently have all of the components in stock so fulfilling orders without delay is not an issue. UPS is currently charging over $60 per wheel so this is great way to get wheels hand delivered at substantial savings....
Last post
As is today 14 of the 25 are sold. Thanks MTFCA!
- 3 Replies
- 834 Views
-
Last post by Mike Lebsack-Iowa
Sat Aug 05, 2023 5:17 pm
-
-
Restorable "Rubes" 1914 "Single Twist" Horn
Replies: 1
by
Rodger Erickson » Sat Aug 05, 2023 3:07 pm
First post
FS one rough unrestored Rubes brass horn, correct for 1914 (and possibly late 1913.) Lots of dents and dings, but the brass seems to be in decent shape and it should straighten without too much trouble. Asking $95 + shipping. Thanks for looking.
14rube07.jpg
14rube08.jpg
14rube12.jpg
Last post
14rube09.jpg
14rube10.jpg
14rube11.jpg
- 1 Replies
- 275 Views
-
Last post by Rodger Erickson
Sat Aug 05, 2023 3:07 pm
-
-
Rough 1914 "Nonpareil" Horn $60
Replies: 1
by
Rodger Erickson » Sat Aug 05, 2023 2:32 pm
First post
FS one rough unrestored Nonpareil brass horn, correct for 1914 (and possibly late 1913.) Missing grille and screen, and there really are some serious dents and dings. If you like a challenging restoration this horn is for you. Asking $60 + shipping. Thanks for looking.
14rube01.jpg
14rube02.jpg
14rube03.jpg
Last post
14rube04.jpg
14rube05.jpg
14rube06.jpg
- 1 Replies
- 259 Views
-
Last post by Rodger Erickson
Sat Aug 05, 2023 2:34 pm
-
-
"Barn Find" E&J Model 32 Side Lights 1914
Replies: 3
by
Rodger Erickson » Sat Apr 29, 2023 11:45 am
First post
FS: Pair of E & J Model 32 side lights with integral brackets, appropriate for mid to late 1914 or possibly very early 1915. Barn Find condition missing burners and founts, along with one lens. The surface is rusty, and the hinges are stuck (you will have to remove the pins or you will rip the hinges right off) but the sheet metal is actually...
Last post
Price reduced to $65.
- 3 Replies
- 1000 Views
-
Last post by Rodger Erickson
Sat Aug 05, 2023 2:08 pm
-
-
Very Nice "Standard" Single Twist Brass Horn c. 1914 $145
Replies: 1
by
Rodger Erickson » Sat Aug 05, 2023 1:55 pm
First post
FS one very nice unrestored Standard brass horn, correct for 1914 (and possibly late 1913.) This horn has only a very small number of dents and the brass is very solid, it should be an easy restoration. The grille and screen are present and look quite restorable. The whole horn is covered with Barn Find Patina but should clean up very nicely. This...
Last post
std04.jpg
std05.jpg
std06.jpg
- 1 Replies
- 242 Views
-
Last post by Rodger Erickson
Sat Aug 05, 2023 1:55 pm
-
-
SOLD: Four 11-21 Valve Covers
Replies: 2
by
Horsehead » Sat Aug 05, 2023 11:22 am
First post
Four used 11-21 rectangular valve covers with 8 new fiber gaskets.
$30 plus $8.80 shipping.
Last post
Sorry - meant to say Hello John .
- 2 Replies
- 271 Views
-
Last post by Mark Wing - NM
Sat Aug 05, 2023 1:17 pm
-
-
Sold: Four Pinion Gears
Replies: 1
by
Horsehead » Sat Aug 05, 2023 11:09 am
First post
Four used pinion gears with good teeth.
Plus: One new repro 13-27 Ruckstell Axel Data Plate
$40 plus $8.80 for shipping
Last post
Email sent
- 1 Replies
- 243 Views
-
Last post by havnfun
Sat Aug 05, 2023 11:31 am
-
-
Sale Ended: Three Oil Filler Caps with Screens
by
Horsehead » Sat Aug 05, 2023 11:17 am
One has Ford script with a brass screen
The other two are pressed steel, without script, with pressed steel screens.
The wire mesh screen is intact in all three.
PLUS: One new repro Model T Owner's Plate ready to by personalized with your info.
$20 plus $8.80 shipping.
- 0 Replies
- 270 Views
-
Last post by Horsehead
Sat Aug 05, 2023 11:17 am
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum