Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

10472 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84191 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Avoid scammers. Don't post personal info!

Last post by Steve Jelf « Wed Jan 21, 2026 11:42 pm
Replies: 14
by AdminJeff » Wed Sep 18, 2024 8:20 pm

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

Part of human nature is the impulse to be a gullible sucker. That's why we elected... :D

14 Replies

15536 Views

Last post by Steve Jelf
Wed Jan 21, 2026 11:42 pm
FS; Cantrell Rear Axle Outer Sleeve Puller (Reduced Price)

Last post by South Park Zephyr « Sat Jan 24, 2026 9:17 pm
Replies: 3
by WaltM » Fri Nov 07, 2025 2:32 pm

First post

For Sale Cantrell Rear Axle Outer Sleeve Puller. Threads are in good shape and lever for sleeve engagement operates smoothly. Small lever operates pin to engage sleeve, center screw pushes against axle to extract sleeve. Tool is lightly marked Cantrell on side. Price $225. plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

Email sent.

3 Replies

683 Views

Last post by South Park Zephyr
Sat Jan 24, 2026 9:17 pm
FS: EKERN Rear Axle Emergency Repair Fixture (1909-1925)

Last post by WaltM « Sat Jan 24, 2026 8:43 pm
Replies: 6
by WaltM » Fri Nov 07, 2025 2:14 pm

First post

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $160. plus shipping. Call or text...

Last post

This version will only fit the small backing plates on the rear axle of 1909-1925.

6 Replies

697 Views

Last post by WaltM
Sat Jan 24, 2026 8:43 pm
Are Hassler bolts still available ?

Last post by RajoRacer « Sat Jan 24, 2026 5:03 pm
Replies: 2
by RajoRacer » Sat Jan 24, 2026 3:32 pm

First post

Looking through the current parts catalogs, I'm not seeing Hassler bolts anymore - I used to get them from Jack Daron many years ago - no one producing them ?

Last post

Thanks Frank !

2 Replies

120 Views

Last post by RajoRacer
Sat Jan 24, 2026 5:03 pm
For sale 4 new mounted block let tires

Last post by donald4ham « Sat Jan 24, 2026 2:51 pm
Replies: 15
by 4ham » Mon Jan 19, 2026 3:27 pm

First post

IMG_0096.jpeg For sale are 4 new blockley tires and tubes mounted on new rims. I bought these about 4 years ago intending to use them on a project that fell through. They are mounted on brand new rims from Australia and I only put enough air in the tubes to mount them. Never were fully inflated. If you can use them, they will need to be picked up...

Last post

Sold , pending payment

15 Replies

1126 Views

Last post by donald4ham
Sat Jan 24, 2026 2:51 pm
Transmission bands

Last post by billd « Sat Jan 24, 2026 2:45 pm

by billd » Sat Jan 24, 2026 2:45 pm

For sale are three early transmission bands without removable ears. One says Ford the other two don’t $50 plus shipping to lower 48. You can reach me through the form or by text message. My number is 419-217-8884.

0 Replies

95 Views

Last post by billd
Sat Jan 24, 2026 2:45 pm
FS: Steering Wheel and Cam timing Gear Puller. 5Z361 Dealer Tool

Last post by WaltM « Sat Jan 24, 2026 2:40 pm
Replies: 1
by WaltM » Fri Jul 25, 2025 5:11 pm

First post

For sale Steering wheel puller and large early 4 spoke cam gear puller. Marked FORD in block letters (no 5Z number on tool). First photo taken from the Ford Model T Manual . Four jaw puller. Threads are in great shape. Price $275 plus shipping. Email, Call or text (248) 894-75fiveone. Thanks, Walt

Last post

To the Top

1 Replies

713 Views

Last post by WaltM
Sat Jan 24, 2026 2:40 pm
FS: early side light bracket

Last post by billd « Sat Jan 24, 2026 2:22 pm

by billd » Sat Jan 24, 2026 2:22 pm

For sale is an early left-hand side side light bracket for the 1906 through 08 N R S models. $60 plus shipping to lower 48 you can reach me through the forum or text message. My number is 419-217-8884.

0 Replies

68 Views

Last post by billd
Sat Jan 24, 2026 2:22 pm
FS: APCO 437 Front Spring Perch Removal Tool

Last post by WaltM « Sat Jan 24, 2026 2:05 pm
Replies: 1
by WaltM » Fri Jul 25, 2025 4:56 pm

First post

For sale APCO 437 front spring perch removal Tool. Special tool that hooks around the front axle to push out the spring perch. Threads are in great shape. NOTE: must soak perches with good rust penetrant for days before use. Price $275 plus shipping. Email, call or text (248) 984-75fiveone. Thanks, Walt

Last post

To the top

1 Replies

748 Views

Last post by WaltM
Sat Jan 24, 2026 2:05 pm
FS: 5Z320 Small Timing Gear Puller. Dealer Tool

Last post by WaltM « Sat Jan 24, 2026 2:03 pm
Replies: 1
by WaltM » Thu Jul 24, 2025 6:22 pm

First post

For sale 5Z320 small crankshaft timing gear puller. Dealer tool. Threads are in great shape. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

To the top

1 Replies

634 Views

Last post by WaltM
Sat Jan 24, 2026 2:03 pm
WTB - Early Cylinder Head Water Outlet

Last post by bpresslylsmo « Sat Jan 24, 2026 1:33 pm

by bpresslylsmo » Sat Jan 24, 2026 1:33 pm

Looking for an early cylinder head water outlet in good condition for use with a brass radiator. It's the stubby one.

Screenshot 2026-01-24 121043.jpg

0 Replies

75 Views

Last post by bpresslylsmo
Sat Jan 24, 2026 1:33 pm
FS: (SOLD) Transmission Tool by Star Tool Co

Last post by WaltM « Sat Jan 24, 2026 12:31 pm
Replies: 5
by WaltM » Sat Jan 18, 2025 12:48 pm

First post

(SOLD) Transmission tool by Star Tool Co . Tool is used to hold the three narrow bands together, on the early transmissions, when replacing the hogshead (transmission cover). Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

5 Replies

4473 Views

Last post by WaltM
Sat Jan 24, 2026 12:31 pm
Kingston five ball carburetor

Last post by billd « Sat Jan 24, 2026 12:30 pm
Replies: 6
by billd » Thu Jan 22, 2026 10:16 am

First post

Can anyone help me identify what engine and year this Kingston five ball carburetor came on? It is for sale, but I have no idea what it would be worth. You can reach me through the forum.

Last post

Thanks to everyone who responded, anyone interested in it?

6 Replies

451 Views

Last post by billd
Sat Jan 24, 2026 12:30 pm
FS: Transmission Driven Gear Puller. Dealer Tool 5Z326.

Last post by WaltM « Sat Jan 24, 2026 12:28 pm
Replies: 2
by WaltM » Thu Aug 07, 2025 10:18 am

First post

For sale Transmission Driven Gear Puller. Dealer Tool 5Z326. Threads are in good shape and bottom disc rotates freely. Price $80 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

2 Replies

1069 Views

Last post by WaltM
Sat Jan 24, 2026 12:28 pm
FS: Early Spark Plug Socket (T 2178) and Handle. Tool kit Tool 1911-13

Last post by WaltM « Sat Jan 24, 2026 12:26 pm
Replies: 1
by WaltM » Sat Nov 29, 2025 2:44 pm

First post

For Sale early spark plug socket (T 2178) and handle 1911-1913. Price $160 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

New price $150 plus shipping.

1 Replies

366 Views

Last post by WaltM
Sat Jan 24, 2026 12:26 pm
Duncan,Ok. swapmeet wanted to buy

Last post by Gene_French « Sat Jan 24, 2026 12:08 pm
Replies: 2
by Gene_French » Sun Jan 18, 2026 12:29 pm

First post

i am starting this post in possibly the wrong section BUT ... the Duncan,Ok. swapmeet is coming up in March and i am attending to sell as well as purchase some parts for my projects ... i am WANTING TO BUY ...a windshield frame for a 1931 Murry body model A 4dr., Masonic items from the 1900-1930 era , and 4 cyl. Dodge Brothers items ,particularly...

Last post

i will be bringing sets of rebabbitted model T connecting rods and some single rods and re-babbitted ballcaps, have several mainbearing cap sets also,these may allow for adjusting the rear thrust problem in many well used engines , several aftermarket distributors including Atwater-Kent , Delco and Bosch and what i believe to be a 4 cyl. Chev....

2 Replies

331 Views

Last post by Gene_French
Sat Jan 24, 2026 12:08 pm
For Sale: Large Fulton Co. Four Chime No. OO Aermore Exhaust Whistle

Last post by GGZ « Sat Jan 24, 2026 11:58 am
Replies: 1
by GGZ » Sat Jan 17, 2026 4:02 pm

First post

The Fulton Co. Four Chime Aermore Exhaust Whistle. The tallest chime approximately measuring 21 1/2 tall and a 1 1/4 inlet ID. The top is stamped The Fulton Co. No. 00 Aermore Exhaust Horn . It's dirty but is in very good, original condition. Nice and straight. No damage. Price is 235.00 including shipping in the USA via FedEx Ground. I do not...

Last post

Another photo

1 Replies

216 Views

Last post by GGZ
Sat Jan 24, 2026 11:58 am
For Sale: Aermore No. 0 whistle with Fulton Cutout

Last post by GGZ « Sat Jan 24, 2026 11:57 am
Replies: 3
by GGZ » Wed Jan 07, 2026 2:37 pm

First post

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

Last post

Another photo

3 Replies

415 Views

Last post by GGZ
Sat Jan 24, 2026 11:57 am
For Sale: Great Large Gabriel Three-Pipe Outboard Exhaust Whistle

Last post by GGZ « Sat Jan 24, 2026 11:55 am
Replies: 2
by GGZ » Sat Jan 17, 2026 4:14 pm

First post

Another item from the garage with neat, early parts. A Gabriel large three-pipe, outboard exhaust whistle. This is used for mounting above the running board. This is about 40 total length, 7 1/2 tall and the tubes are 1 3/4 in diameter. It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp. This...

Last post

Another photo

2 Replies

253 Views

Last post by GGZ
Sat Jan 24, 2026 11:55 am
WTB: 1912 top bow iron clamps?????

Last post by billd « Sat Jan 24, 2026 11:26 am
Replies: 13
by michaelb2296 » Thu Mar 13, 2025 10:06 pm

First post

I dont know what these are called but if you have them please let me know:

IMG_1451.jpeg

I think they are steel???? Seems like it. It doesnt look like straps.

Last post

Good morning Mike, if you would wish to discuss the top bow clamps you can text me. My number is 419-217-8884.

13 Replies

1271 Views

Last post by billd
Sat Jan 24, 2026 11:26 am
(SOLD) EKERN Emergency Rear Axle Fixture (1909-1927)

Last post by WaltM « Sat Jan 24, 2026 11:16 am
Replies: 1
by WaltM » Mon Jan 12, 2026 1:55 pm

First post

(SOLD) EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

1 Replies

317 Views

Last post by WaltM
Sat Jan 24, 2026 11:16 am
FS PARTS

Last post by MotoBrew « Sat Jan 24, 2026 11:10 am
Replies: 3
by Mark Chaffin » Thu Jan 22, 2026 4:37 pm

First post

Various parts as described below. Each will require an additional $18.50 shipping. Mark Chaffin (951)805-0928

20260122_132124.jpg
Pan Arms NOS. All for $40.00 plus shipping

20260122_132018.jpg
Pan support bracket sets (3). All for $40.00 plus shipping

20260122_131651.jpg
26/27 brake backing plate set $25.00 plus shipping....

Last post

Sorry changed my mind. I see that the driver side one has a bit removed at the top. Sorry to bother you.

3 Replies

692 Views

Last post by MotoBrew
Sat Jan 24, 2026 11:10 am
NOS Rear Spring Perches

Last post by Don ellis « Sat Jan 24, 2026 10:51 am

by Don ellis » Sat Jan 24, 2026 10:51 am

I have a limited supply of NOS rear spring perches. Most of them have the manhole oiler used from 1917-1923. I also have several sets with the flip top oiler used from 23-27. These were assembled and dipped in black paint, oilers, bushings and all. Why not use NOS if available?
$100.00$ a set plus 12.00$ shipping in the lower 48. Venmo or paypal...

0 Replies

70 Views

Last post by Don ellis
Sat Jan 24, 2026 10:51 am
'27 frame, motor, loose parts

Last post by Martinbuilt « Fri Jan 23, 2026 8:57 pm
Replies: 20
by Martinbuilt » Thu Dec 04, 2025 4:52 pm

First post

I'm going to be shifting some things around in the shop, so if i can re-home this soon...
Otherwise, everything gets buried until i'm bored.
No title. I wanted to build a pig 'n ford type racer.
Super nice frame. Clean, painted, lovely. (I drilled out the rivets, and removed the running board supports, but they are here.)
Numbers are present.
'27...

Last post

Thanks for your interest.
I'll have to look, there may be (2) front wishbones. If there's a spare, i'll send you a note.

20 Replies

2084 Views

Last post by Martinbuilt
Fri Jan 23, 2026 8:57 pm
FS: early headlamp fork

Last post by billd « Fri Jan 23, 2026 8:36 pm

by billd » Fri Jan 23, 2026 8:36 pm

I have for sale an early straight left-hand side headlamp fork. Good threads, $65 plus shipping to lower 48. You can reach me through text message or through the forum. My number is 419-217-8884.

0 Replies

115 Views

Last post by billd
Fri Jan 23, 2026 8:36 pm
For Sale: Explosion Whistle Price Drop!

Last post by Ed Fuller « Fri Jan 23, 2026 6:38 pm
Replies: 2
by Ed Fuller » Thu Nov 13, 2025 5:32 pm

First post

Explosion whistle, aluminum body should clean up nice. The valve is seized and needs to be freed up.

$35 plus shipping in the U.S.

IMG_8246.jpeg

IMG_8247.jpeg

IMG_8248.jpeg

IMG_8249.jpeg

Last post

Still available

2 Replies

582 Views

Last post by Ed Fuller
Fri Jan 23, 2026 6:38 pm
For Sale: Price Drop! Bosch Distributor

Last post by Ed Fuller « Fri Jan 23, 2026 6:37 pm
Replies: 6
by Ed Fuller » Sat Nov 01, 2025 7:20 pm

First post

Bosch Distributor for sale. This came with a bunch of T parts I just bought and I’ve never run a distributor on my T’s so I don’t know much about it.

The shaft turns, the cap has a couple little chunks missing but should still work. The rotor looks good. It looks like the body of the distributor has had some damage in the past and look to have...

Last post

still available

6 Replies

1065 Views

Last post by Ed Fuller
Fri Jan 23, 2026 6:37 pm
crank with ratchet

Last post by MotoBrew « Fri Jan 23, 2026 6:37 pm
Replies: 2
by Melba Nolan » Sat Jan 03, 2026 5:33 pm

First post

For sale: crank handle with starting ratchet $45 plus shipping
crank handle turns freely
20230222_085303.jpg

Last post

Message sent, Check sent

2 Replies

537 Views

Last post by MotoBrew
Fri Jan 23, 2026 6:37 pm
Cranks and cams at Turlock swapmeet

Last post by t-time « Fri Jan 23, 2026 6:06 pm

by t-time » Fri Jan 23, 2026 6:06 pm

Counter weighted cranks and 280 cams will be at the Turlock swap Saturday, space GG59. Cash only

0 Replies

189 Views

Last post by t-time
Fri Jan 23, 2026 6:06 pm
TW Timer brush order

Last post by love2T's « Fri Jan 23, 2026 4:12 pm
Replies: 11
by love2T's » Sat Jan 17, 2026 9:04 am

First post

Hey all TW Timer lovers...by request I've been asked about any new runs for the TW timer. I hadn't planned to til 2027 but I reckon maybe I better. So I will take EMAIL THROUGH THE FORUM requests until Feb. 15, I strongly suggest you PLAN YEARS AHEAD.

Price from 2025 started at $19 ea. for rectangular brush, $27 for the round. You'd think it...

Last post

What is a TW timer?

The TW timer is a recent (this century?) version of a carbon brush T timer, as seen here:

It is my understanding that they went out of production, but various folks are still making the brushes available, the brushes being the only real consumable in the timer.

Keep crankin',
Eric
[/quote

Yep, made/designed by the late...

11 Replies

732 Views

Last post by love2T's
Fri Jan 23, 2026 4:12 pm
Wanted Sprague Steering Parts

Last post by Mark Gregush « Fri Jan 23, 2026 12:17 pm
Replies: 3
by WorldChamp1914 » Wed Dec 31, 2025 9:42 pm

First post

My first Sprague is complete except for an original tie rod. My second one is missing the pitman arm and some other parts….Who has parts to a Sprague? IMG_7290.png IMG_7289.png

Last post

Depending on the size of the square part, wonder if you could use one of the shortened Model A pitman arms?

3 Replies

448 Views

Last post by Mark Gregush
Fri Jan 23, 2026 12:17 pm
For Sale: Large Rubes 3/4 Brass Bulb Horn Assembly

Last post by GGZ « Fri Jan 23, 2026 12:14 pm
Replies: 1
by GGZ » Fri Jan 23, 2026 11:57 am

First post

This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished....

Last post

More photos

1 Replies

146 Views

Last post by GGZ
Fri Jan 23, 2026 12:14 pm
For Sale: 1908-1912ish Brass Headlamps

Last post by GGZ « Fri Jan 23, 2026 11:54 am
Replies: 2
by GGZ » Fri Jan 09, 2026 8:59 pm

First post

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Last post

More photos

2 Replies

450 Views

Last post by GGZ
Fri Jan 23, 2026 11:54 am
WTB…..Rare Hubcap

Last post by Allan « Fri Jan 23, 2026 6:58 am
Replies: 7
by WorldChamp1914 » Fri Jan 02, 2026 12:53 am

First post

IMG_7249.png

Last post

If you have one, a lost wax casting may be the answer.

Allan from down under.

7 Replies

1066 Views

Last post by Allan
Fri Jan 23, 2026 6:58 am
FS- Unknown manifold

Last post by Matt in California « Fri Jan 23, 2026 2:39 am
Replies: 2
by Matt in California » Mon Jan 19, 2026 8:47 pm

First post

I got this with a bunch of Model T stuff. If you know what it is, please let me know if you’re interested in buying it please let me know.
IMG_7258.jpeg
IMG_7257.jpeg
IMG_7255.jpeg

Last post

Thanks! I was hoping someone would have an idea

2 Replies

584 Views

Last post by Matt in California
Fri Jan 23, 2026 2:39 am
WTB: magneto cross drive assy

Last post by frontyboy « Thu Jan 22, 2026 11:33 pm
Replies: 2
by frontyboy » Thu Jan 22, 2026 7:03 pm

First post

WTB: cross drive magneto set up for non generator model t engine. Don't need the mag, just the mag mounting and drive.
thnx,
frontyboy

Last post

Did not receive your email you can reply to my email address brasscarguy@comcast.net.

frontyboy

2 Replies

196 Views

Last post by frontyboy
Thu Jan 22, 2026 11:33 pm
FS 1912 Engine Block, Pan, Hogshead, Trans

Last post by old_charley « Thu Jan 22, 2026 10:40 pm
Replies: 3
by old_charley » Thu Jan 22, 2026 10:31 pm

First post

Everything in the first picture. Block with heavy valve doors, and timing gear cover; fan w/brass hub; seven rivet teacup pan; hogshead with pedals and Ford script inspection cover; complete transmission assembly. The block, going by the serial #97901 was assembled in March of '12. The casting date is not really legible. There are no cracks in the...

Last post

More pictures.
Pan 1.jpeg
Pan 2.jpeg
Pan 3.jpeg
Pan 4.jpeg
Pan 5.jpeg

3 Replies

306 Views

Last post by old_charley
Thu Jan 22, 2026 10:40 pm
WTB Black and Brass cowl lamps

Last post by Larry Debaugh « Thu Jan 22, 2026 9:35 pm
Replies: 3
by mklooksup » Sun Jan 18, 2026 12:00 pm

First post

I'm looking for a pair of 1913 1914 black and brass cowl lamps. Please give them up :)

Manny Kourounis

Last post

Re sent… email is watling1@comcast.net larry

3 Replies

281 Views

Last post by Larry Debaugh
Thu Jan 22, 2026 9:35 pm
FS ENGINE REBUILD PARTS LOT (SOLD)

Last post by Mark Chaffin « Thu Jan 22, 2026 9:01 pm
Replies: 2
by Mark Chaffin » Thu Jan 22, 2026 4:59 pm

First post

These parts came from a recent estate sale. They were in a box together. Looks as if someone was putting an engine together and never completed the project. Parts included Jahn's standard pistons and rings. Standard valves and lifters. Includes springs and keepers. New crankshaft gear as well. Babbitt looks pretty good. Don't need it cluttering up...

Last post

Sorry Scott. Parts have been sold.

2 Replies

375 Views

Last post by Mark Chaffin
Thu Jan 22, 2026 9:01 pm
W.T.B. Bennett brake parts

Last post by TeveS-Nor Cal « Thu Jan 22, 2026 6:51 pm
Replies: 3
by TeveS-Nor Cal » Tue Jan 20, 2026 1:30 pm

First post

W.T.B. Bennett brake parts. I need a drum and a center mounting widget thing plus anything else you might have.
Email me by the Forum- Thanks, Steve

Last post

DSCN4704.JPG DSCN4701.JPG
I did it- I posted two pictures of the Bennett brake parts I need. Only took all afternoon to figure it out!

3 Replies

308 Views

Last post by TeveS-Nor Cal
Thu Jan 22, 2026 6:51 pm
Sam Cipriano Estate Auction No. 2

Last post by Junk poor « Thu Jan 22, 2026 1:43 pm
Replies: 4
by BigAl » Thu Jan 22, 2026 11:03 am

On Saturday Feb. 28th at 10:00AM in Tipton, Michigan Sam's 2nd Auction will take place. More early Model T parts and over a half dozen new early bodies. New 1909 Touring Wood Body that was displayed at the Ford Piquette Plant, a new 1903 Wood Body Four Seat Tonneau, a new 1911 Town Car Body in prime with all hardware, a New 1910 Coupe Wood Body, a...

4 Replies

434 Views

Last post by Junk poor
Thu Jan 22, 2026 1:43 pm
FS - 2 NEW HUBCAPS

Last post by brassford « Thu Jan 22, 2026 11:50 am
Replies: 8
by brassford » Tue Nov 18, 2025 3:07 pm

First post

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED

Enjoy Your Day!

Last post

To the top please

8 Replies

1198 Views

Last post by brassford
Thu Jan 22, 2026 11:50 am
FS Original Accessory Picnic Set in Case SOLD

Last post by big2bird « Thu Jan 22, 2026 10:03 am
Replies: 3
by Tparts » Mon Jan 12, 2026 9:12 pm

First post

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

I'll take this. I'll call you later today.

3 Replies

645 Views

Last post by big2bird
Thu Jan 22, 2026 10:03 am
Brass anti tarnish covers!

Last post by Karl Von Neumann « Thu Jan 22, 2026 9:56 am

by Karl Von Neumann » Thu Jan 22, 2026 9:56 am

Brass anti tarnish covers are now available for order! Full sets not yet available but are comming soon. Earlier model headlamps and cowl lamps are in the works. I am a one man band doing this so please be patient with me and my sewing machine we can only work so fast. All covers are hand made to order from anti tarnish cloth and water proof...

0 Replies

146 Views

Last post by Karl Von Neumann
Thu Jan 22, 2026 9:56 am
FS- New 11 Tooth Pinion Gear-sold pending pmt.

Last post by Jones in Aiken SC « Thu Jan 22, 2026 9:38 am
Replies: 1
by Dan McEachern » Thu Jan 22, 2026 1:38 am

First post

This has sold pending payment. Thanks Greg!!

For Sale- new 11tooth rear end pinion gear. This is a left over from a recent project where we needed a new 40 tooth ring gear but not the pinion.
These sell from the usual vendors for over $200.00. This one can be yours for $150.00 plus $15.00 USPS shipping. This is a high quality USA made pinion with...

Last post

Email sent

1 Replies

161 Views

Last post by Jones in Aiken SC
Thu Jan 22, 2026 9:38 am
For Sale: Early Front Spring Perches

Last post by EricMac « Thu Jan 22, 2026 6:39 am
Replies: 1
by Ed Fuller » Wed Jan 21, 2026 9:24 pm

First post

Very nice pair of early front spring perches for over the axle wishbone front end. Very good threads, someone did a nice job removing them without destroying them. They don’t have a hole for an oiler so I believe that makes them 1915 and earlier but I could be wrong.

$150 plus shipping in the U.S.

IMG_8961.jpeg

IMG_8962.jpeg...

Last post

Email sent

1 Replies

199 Views

Last post by EricMac
Thu Jan 22, 2026 6:39 am
FS Early Carburetor Rod PENDING

Last post by Charlie_26_TT_Ccab « Wed Jan 21, 2026 11:56 pm
Replies: 1
by Tparts » Wed Jan 21, 2026 9:53 pm

First post

For Sale is an original carburetor control rod that connects the steering column to the carb. $25.00 plus shipping Lang’s 1-800-872-7871

Last post

Email sent.

1 Replies

210 Views

Last post by Charlie_26_TT_Ccab
Wed Jan 21, 2026 11:56 pm
FS Accessory Fan Blade PENDING

Last post by kevinf « Wed Jan 21, 2026 11:53 pm
Replies: 10
by Tparts » Thu Jan 01, 2026 9:23 pm

First post

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $15.00 plus shipping. Lang’s 1-800-872-7871

Last post

Ok, I will take it and give you a call tomorrow morning,
thanks,
Kevin

10 Replies

1117 Views

Last post by kevinf
Wed Jan 21, 2026 11:53 pm
FS 1909-13 Front Fender Iron $95.00

Last post by Tparts « Wed Jan 21, 2026 9:34 pm

by Tparts » Wed Jan 21, 2026 9:34 pm

For Sale is one front fender iron correct for 1909-13 Model Ts. The iron needs to be straightened and may have been repaired at one time. $95.00 plus shipping Lang’s 1-800-872-7871.

0 Replies

221 Views

Last post by Tparts
Wed Jan 21, 2026 9:34 pm
For Sale: 1911-1918 Front Spindles

Last post by Ed Fuller « Wed Jan 21, 2026 9:30 pm

by Ed Fuller » Wed Jan 21, 2026 9:30 pm

Nice pair of front spindles correct for 1911-1918 with correct straight steering arms. No wear grooves or smashed threads. Could probably use some new bushings.

$100 plus shipping in the U.S.

IMG_8965.jpeg

IMG_8966.jpeg

IMG_8967.jpeg

IMG_8968.jpeg

0 Replies

146 Views

Last post by Ed Fuller
Wed Jan 21, 2026 9:30 pm
FS Repro Hardware Set for Wood Bed SOLD

Last post by Tparts « Wed Jan 21, 2026 9:12 pm

by Tparts » Wed Jan 21, 2026 9:12 pm

For Sale is a nice hardware kit for a pickup bed or accessory wood body. Rear tailgate hinges are not included but are easily made. SOLD plus shipping Lang’s 1-800-872-7871

0 Replies

148 Views

Last post by Tparts
Wed Jan 21, 2026 9:12 pm
FS Stevens T-122 Driveshaft Sleeve Puller $250.00

Last post by Tparts « Wed Jan 21, 2026 9:03 pm

by Tparts » Wed Jan 21, 2026 9:03 pm

For Sale is a Stevens T-122 Driveshaft Sleeve Puller. It’s in nice condition except the end cap on the threaded part is missing. It is still works fine. $250.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

162 Views

Last post by Tparts
Wed Jan 21, 2026 9:03 pm
FS Homemade Starter Bendex Head Puller $20.00

Last post by Tparts « Wed Jan 21, 2026 8:40 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 7:45 pm

First post

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

Last post

To the top

1 Replies

349 Views

Last post by Tparts
Wed Jan 21, 2026 8:40 pm
FS Accessory Anti-Theft Device $60.00

Last post by Tparts « Wed Jan 21, 2026 8:27 pm
Replies: 4
by Tparts » Wed Jan 07, 2026 10:23 pm

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $60.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

4 Replies

618 Views

Last post by Tparts
Wed Jan 21, 2026 8:27 pm
FS 1917-25 Nice Steering Wheel $75.00

Last post by Tparts « Wed Jan 21, 2026 8:25 pm
Replies: 1
by Tparts » Thu Jan 15, 2026 8:46 pm

First post

For sale is a very nice 1917-1925 Steering Wheel complete with spider. No cracks in rim. $75.00 Lang’s 1-800-872-7871

Last post

Price decrease

1 Replies

274 Views

Last post by Tparts
Wed Jan 21, 2026 8:25 pm
Want to buy used transmission oil screen

Last post by Tparts « Wed Jan 21, 2026 8:21 pm
Replies: 2
by 2shute » Wed Jan 21, 2026 8:59 am

Fits under the transmission cover. Anyone have anything? Thanks.

2 Replies

223 Views

Last post by Tparts
Wed Jan 21, 2026 8:21 pm
FS HIGH COMPRESSION HEAD (SOLD)

Last post by Mark Chaffin « Wed Jan 21, 2026 7:49 pm
Replies: 2
by Mark Chaffin » Wed Jan 21, 2026 6:56 pm

First post

Unique aluminum high compression head with Ford script and 14mm plugs. Price is $450 plus domestic shipping. Mark Chaffin (951)805-0928

20260121_154916.jpg

20260121_154937.jpg

Last post

Going to Bill.

2 Replies

238 Views

Last post by Mark Chaffin
Wed Jan 21, 2026 7:49 pm
FS: Early Ruckstell shift lock assemble

Last post by billd « Wed Jan 21, 2026 7:37 pm

by billd » Wed Jan 21, 2026 7:37 pm

I have for sale an early Hall Scott Ruckstell shift lock assembly in very good condition. $250.00 plus shipping to the lower 48. Best way to reach me is through text message, my number is 419-217-8884.

0 Replies

97 Views

Last post by billd
Wed Jan 21, 2026 7:37 pm
For Sale: Full set of Hassler Pancake Shocks

Last post by RajoRacer « Wed Jan 21, 2026 1:48 pm
Replies: 6
by RajoRacer » Thu Oct 26, 2023 11:09 am

First post

I have a complete set ready for paint - new grade 8 bolts. If any interest, I'll get them out & get some photos. $400 + the ride. Drop me a note through the forum, please.

I also have quite a few Beehive hassler parts available.

Last post

Sent you a note, George.

6 Replies

1853 Views

Last post by RajoRacer
Wed Jan 21, 2026 1:48 pm
Water pump

Last post by billd « Wed Jan 21, 2026 1:21 pm

by billd » Wed Jan 21, 2026 1:21 pm

Nims water pump. For a non-Brass Radiator car. Looks like it’s never been used. $100 plus shipping to lower 48. Best way to reach me is through text message. My number is 419-217-8884.

0 Replies

143 Views

Last post by billd
Wed Jan 21, 2026 1:21 pm
Brass mirror

Last post by billd « Wed Jan 21, 2026 12:14 pm

by billd » Wed Jan 21, 2026 12:14 pm

One 6“ x 2 7/8 brass mirror for open car. Has one small chip in upper left-hand corner. $50 plus shipping to lower 48. Best Way to reach me is through text message. My number is 419-217-8884.

0 Replies

210 Views

Last post by billd
Wed Jan 21, 2026 12:14 pm
Brass tire pumps

Last post by billd « Wed Jan 21, 2026 11:25 am

by billd » Wed Jan 21, 2026 11:25 am

Three Brass tire pumps for restoration or as is, manufactured by Bridgeport Brass company. $100 each plus shipping to lower 48. Best Way to reach me is through text message. My number is 419-217-8884.

0 Replies

170 Views

Last post by billd
Wed Jan 21, 2026 11:25 am
Early 1911-12 Rear end

Last post by DaveB « Wed Jan 21, 2026 10:20 am
Replies: 1
by DaveB » Tue Jan 20, 2026 2:59 pm

First post

I have a 1912 rear end with radius rods ,drive shaft and housing the internal parts are new from Lang's or Chaffins, or New Old Stock . My age will never use this a good project to finish putting it together if you need one This was from RV Anderson long time ago. the I can text you photos, and I am willing to work out shipping or delivery. Dave...

Last post

SOLD! Thank You!

1 Replies

416 Views

Last post by DaveB
Wed Jan 21, 2026 10:20 am
NOS 5 to 1 Steering sun gears FS

Last post by South Park Zephyr « Wed Jan 21, 2026 7:52 am
Replies: 8
by Dan Hatch » Fri Jan 16, 2026 7:17 pm

First post

Have some NOS 5 to 1 Steering pinions sun gears. T-3519B. $35 for a set + shipping. See pictures. Email me by forum. Thanks Dan.
IMG_5279.jpeg
IMG_5280.jpeg

Last post

Dan,
I too would like a set.

Scott

8 Replies

723 Views

Last post by South Park Zephyr
Wed Jan 21, 2026 7:52 am
FS all parts

Last post by Tinner12 « Wed Jan 21, 2026 7:11 am

by Tinner12 » Wed Jan 21, 2026 7:11 am

See add under cars for sale 1919 PU

0 Replies

286 Views

Last post by Tinner12
Wed Jan 21, 2026 7:11 am
WTB Improved Rad Shell

Last post by Ken Buhler « Tue Jan 20, 2026 11:10 pm
Replies: 1
by Ken Buhler » Thu Jan 15, 2026 10:36 am

First post

I'm hoping to find a mint condition tall Canadian nickle rad shell. Dan Hatch sold one a few years ago and if it didn't get used, please write to me.
Ken Buhler

Last post

Repost post

1 Replies

283 Views

Last post by Ken Buhler
Tue Jan 20, 2026 11:10 pm
Rear Hub Puller FS

Last post by Dan Hatch « Tue Jan 20, 2026 9:12 pm
Replies: 4
by Dan Hatch » Sat Jan 10, 2026 10:36 am

First post

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Last post

Back to the top

4 Replies

644 Views

Last post by Dan Hatch
Tue Jan 20, 2026 9:12 pm
FS EARLY T parts1912 JB HEADLAMPS OTHER EARLY T parts

Last post by Phillip O « Tue Jan 20, 2026 7:41 pm

by Phillip O » Tue Jan 20, 2026 7:41 pm

2 piece drive shafts DB axle other early brass Era parts at Turlock A's swapmeet Jan. 24/ 25 spaces C 30/32/34 zone 1 call or tex Phillip 209 769-3384.

0 Replies

291 Views

Last post by Phillip O
Tue Jan 20, 2026 7:41 pm
FS

Last post by Phillip O « Tue Jan 20, 2026 7:29 pm

by Phillip O » Tue Jan 20, 2026 7:29 pm

FS EARLY T PARTS 1912 JB headlamps 2 piece drives DB front axle. and more brass era parts At Turlock CAL. A's swapmeet jan.24/25 . See Phillip in zone 1 spaces C 30/ 32 / 34. Call or tex 209 769 3384

0 Replies

275 Views

Last post by Phillip O
Tue Jan 20, 2026 7:29 pm
WTB:27 Touring Top Trim Pieces

Last post by Brent Mize « Tue Jan 20, 2026 7:02 pm

by Brent Mize » Tue Jan 20, 2026 7:02 pm

Looking for 2 each of these top trim pieces for my 27 touring.
Let me know if you can help. Looking for originals not repos.
Thanks for your time
Brent

0 Replies

127 Views

Last post by Brent Mize
Tue Jan 20, 2026 7:02 pm
Wanted Steel felloes for 21” wheel

Last post by Karl Von Neumann « Tue Jan 20, 2026 1:37 pm
Replies: 3
by Darren J » Tue Jan 20, 2026 9:13 am

First post

If I can’t convert from wood to wire I’ll need to find new steel felloes for demountable rims. I just learned from you guys that mine are junk.

Need to explore my options so I can get on the road.

Thanks, Darren

Last post

I've got them as well as the wires responded to your email this morning

3 Replies

223 Views

Last post by Karl Von Neumann
Tue Jan 20, 2026 1:37 pm
Wood plans 15/22 Roadster FS

Last post by KWTownsend « Mon Jan 19, 2026 10:36 pm
Replies: 4
by Dan Hatch » Sun Jan 18, 2026 4:18 pm

First post

Here is a set of wood plans for 15/22 Roadster. No sure where I got them but I am not needing them. They must have been in some stuff I bought. I DID NOT COPY THEM , THIS WAY I RECEIVED THEM. They are Mel Miller plans. 5 pages total.
$50 + shipping. Email me by forum. Thanks Dan
IMG_5310.jpeg
IMG_5311.jpeg

Last post

Bill, Message sent.

4 Replies

362 Views

Last post by KWTownsend
Mon Jan 19, 2026 10:36 pm
Model T Boat Motor

Last post by jawa « Mon Jan 19, 2026 9:23 pm
Replies: 4
by jawa » Sun Jan 18, 2026 1:58 pm

First post

Turns over freely. Have not even tried to start. I picked up with plans to clean it up and get it running but I don't have the time. Cool piece. I can send more pictures if you contact me. $850 picked up in central New York.

Last post

It looks like a casted oil pan and my guess is there is some sort of oil pump that runs off the cam. If you look closely there is a little oil sight glass.

4 Replies

733 Views

Last post by jawa
Mon Jan 19, 2026 9:23 pm
FS-SOLD Shortened Drive ShaftHousing Radius Rods -Warford

Last post by Dan McEachern « Mon Jan 19, 2026 7:03 pm
Replies: 2
by Dan McEachern » Mon Jan 19, 2026 4:36 pm

First post

For Sale- Drive shaft, Housing and Radius Rods- shortened 16½ for Warford Transmission for passenger car.
Will Ship, Deliver to Turlock, CA swap meet or pickup in Oakland,Ca. PM or e-mail to DMCGEARSatYAHOOdotCOM.
$100.00 plus shipping

KIMG1965.JPG

Last post

Sold to Charlie. Sorry Ed, thank you . you are 2nd in line if Charlie does not take it.

2 Replies

271 Views

Last post by Dan McEachern
Mon Jan 19, 2026 7:03 pm
Wanted: hubs to convert from Wood to Wire

Last post by Karl Von Neumann « Mon Jan 19, 2026 6:37 pm
Replies: 2
by Darren J » Mon Jan 19, 2026 5:16 pm

First post

Turns out my wheels are a mess. I don't know much about any of this but I think I just need to find wire wheels and hub adapters.

Currently have a 26 coupe of 21 wood wheels and steel felloes.

Anybody have anything for sale that may help me out?

Thanks, Darren

Last post

I have a bunch of fronts and wheels not to many rears shoot me a message I'm in wi as well

2 Replies

201 Views

Last post by Karl Von Neumann
Mon Jan 19, 2026 6:37 pm
FS - Early Firewall Bracket Set $100 + shipping

Last post by RajoRacer « Mon Jan 19, 2026 6:06 pm
Replies: 12
by Dennis Fleming » Thu Jun 26, 2025 5:34 pm

First post

Nice set of firewall brackets.
$100 plus Shipping for the set.
Thank you IMG_2187.jpeg IMG_2188.jpeg

Last post

Send me a note.

12 Replies

1417 Views

Last post by RajoRacer
Mon Jan 19, 2026 6:06 pm
steel center bed plate for pickup new price

Last post by Shannon_in_Texas « Mon Jan 19, 2026 5:12 pm
Replies: 3
by Melba Nolan » Wed Dec 07, 2022 11:42 am

First post

For sale: center bed plate for roadster pickup. mounts over rear spring cross member $30 plus postage
it has rust but no holes
20221205_123517.jpg 20221205_123524.jpg

Last post

Sending email— thanks!

3 Replies

1037 Views

Last post by Shannon_in_Texas
Mon Jan 19, 2026 5:12 pm
FS-Crankcase Corner Reinforcement Brackets

Last post by Dan McEachern « Mon Jan 19, 2026 4:53 pm

by Dan McEachern » Mon Jan 19, 2026 4:53 pm

For Sale- Pan Corner reinforcement brackets. These help prevent cracking of the oil pan and should be used on all engines. They bolt onto the bottom of the oil pan in the corners where the pan flares out for the flywheel.
$15.00/pair plus $12.00 USPS . PM or e-mail DMCGEARSatYAHOOdotCOM.
thanks!

KIMG1967.JPG

0 Replies

132 Views

Last post by Dan McEachern
Mon Jan 19, 2026 4:53 pm
Engine mount repair brackets FS

Last post by Ruxstel24 « Mon Jan 19, 2026 9:08 am
Replies: 6
by Ruxstel24 » Wed Jan 07, 2026 1:06 pm

First post

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Last post

TTT please !

6 Replies

526 Views

Last post by Ruxstel24
Mon Jan 19, 2026 9:08 am
DUNN counterweights FS Lower price !

Last post by Ruxstel24 « Mon Jan 19, 2026 9:08 am
Replies: 4
by Ruxstel24 » Mon Dec 29, 2025 9:34 am

First post

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

Last post

TTT please !

4 Replies

547 Views

Last post by Ruxstel24
Mon Jan 19, 2026 9:08 am
Original Main bearing bolts and nuts FS :SOLD:

Last post by Ruxstel24 « Mon Jan 19, 2026 9:07 am
Replies: 3
by Ruxstel24 » Wed Jan 07, 2026 3:23 pm

First post

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

Last post

All bolts sold to Jon thanks !

3 Replies

419 Views

Last post by Ruxstel24
Mon Jan 19, 2026 9:07 am
tail light

Last post by Melba Nolan « Sun Jan 18, 2026 6:18 pm
Replies: 2
by Melba Nolan » Sun Apr 06, 2025 11:31 am

First post

For sale tail light body $10 plus postage
20250327_183104.jpg 20250327_183052.jpg

Last post

move to top

2 Replies

2342 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:18 pm
tire pump for running board

Last post by Melba Nolan « Sun Jan 18, 2026 6:17 pm
Replies: 1
by Melba Nolan » Sat Jun 07, 2025 7:48 pm

First post

For sale: running board tire pump $50 plus postage
with hose and guage. hose came loose from pump. could not find a name
20250527_194356.jpg 20250527_194438.jpg 20250527_194831.jpg

Last post

move to top

1 Replies

1450 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:17 pm
side cover

Last post by Melba Nolan « Sun Jan 18, 2026 6:14 pm
Replies: 2
by Melba Nolan » Sat May 03, 2025 1:52 pm

First post

For sale: timing gear side cover $25 plus shipping
20240619_072255.jpg 20240619_072309.jpg

Last post

move to top

2 Replies

2033 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:14 pm
hub puller

Last post by Melba Nolan « Sun Jan 18, 2026 6:03 pm
Replies: 5
by Melba Nolan » Thu Apr 03, 2025 4:37 pm

First post

For sale: rear hub puller #3Z605 with faint Ford script. Very good condition $100 plus postage
20250403_145258.jpg 20250403_145245.jpg 20250403_145411.jpg 20250406_101049.jpg 20250406_101104.jpg

Last post

move to top

5 Replies

1683 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:03 pm
wood for top of truck Reduced price

Last post by Melba Nolan « Sun Jan 18, 2026 6:01 pm
Replies: 3
by Melba Nolan » Sat Aug 09, 2025 5:26 pm

First post

For sale: New wood for top of truck. bought from Classic Wood Products. $750 plos shipping
20250616_135906 - Copy.jpg

Last post

reduced price $725 plus postage

3 Replies

1301 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:01 pm
crossmember

Last post by Melba Nolan « Sun Jan 18, 2026 6:00 pm
Replies: 2
by Melba Nolan » Sat Aug 02, 2025 2:11 pm

First post

For sale: Cross member with brackets $75 plus postage
20250325_155833.jpg 20250325_155845.jpg

Last post

move to top

2 Replies

1010 Views

Last post by Melba Nolan
Sun Jan 18, 2026 6:00 pm
running board pump Reduced price

Last post by Melba Nolan « Sun Jan 18, 2026 5:59 pm
Replies: 5
by Melba Nolan » Sat Jun 15, 2024 8:39 pm

First post

For sale: running board air compressor pump $100 plus shipping
20240607_135251 - Copy.jpg 20240607_135218.jpg

Price reduced to $85 plus shipping

Last post

new price $75 plus postage

5 Replies

2096 Views

Last post by Melba Nolan
Sun Jan 18, 2026 5:59 pm
part of carb

Last post by Melba Nolan « Sun Jan 18, 2026 5:28 pm

by Melba Nolan » Sun Jan 18, 2026 5:28 pm

For sale: bottom of carb $25 plus postage

20220730_140333.jpg

0 Replies

143 Views

Last post by Melba Nolan
Sun Jan 18, 2026 5:28 pm
Valve lifter FS

Last post by Dan Hatch « Sun Jan 18, 2026 5:13 pm
Replies: 2
by Dan Hatch » Sun Jan 18, 2026 4:11 pm

First post

Here is a handy dandy valve lifter extra to me. Looks like a Stevens but is not marked. Says Abel?? See pictures. $35 + shipping. Email me by forum. Thanks Dan
IMG_5302.jpeg
IMG_5304.jpeg
IMG_5308.jpeg

Last post

Sold pending payment

2 Replies

205 Views

Last post by Dan Hatch
Sun Jan 18, 2026 5:13 pm
For Sale: PRICE REDUCED Original Early Magneto Literature Simms, Berling, Kingston

Last post by GGZ « Sun Jan 18, 2026 3:00 pm
Replies: 8
by GGZ » Sat Aug 23, 2025 5:15 pm

First post

Price Reduced to 125.00 includes shipping in the USA. Here is a really nice group of early magneto literature. Includes: 6 by 9 Berling two manuals together for Type S and Type E-41 four cylinder, 28 pages, Kingston 6 pages, fold out, 3 x 7 , European, 23 pages, 6 x 9 (I can't read it!), Two Simms 6 x 9 12 and 16 pages and two larger blueprints...

Last post

Price reduced to 125.00 includes shipping

8 Replies

1099 Views

Last post by GGZ
Sun Jan 18, 2026 3:00 pm
Connecting Rod clamp bolts FS

Last post by Dan Hatch « Sun Jan 18, 2026 2:57 pm
Replies: 2
by Dan Hatch » Fri Jan 16, 2026 7:01 pm

First post

Here are some used sets of connecting rod bolts. Set of four $10 + shipping. Have several sets. See pictures. Email me by forum. Thanks Dan
IMG_5276.jpeg

Last post

Back to the top

2 Replies

273 Views

Last post by Dan Hatch
Sun Jan 18, 2026 2:57 pm
WTB: Fork Mounted Electric Headlights

Last post by Karl Von Neumann « Sun Jan 18, 2026 2:31 pm
Replies: 5
by BRENT in 10-uh-C » Sun Jan 18, 2026 8:45 am

First post

Looking to purchase a pair of the Fork-mounted Electric Headlights. Restored or Unrestored, any condition considered as long as the lamps are complete and restorable.

Below are examples of what I am looking for;

Thanks!!

Last post

I have a pair of electric corcoran lamps i will go see if they will fit the T forks

5 Replies

229 Views

Last post by Karl Von Neumann
Sun Jan 18, 2026 2:31 pm
Model T Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:35 pm

by 1926TTExpress » Sun Jan 18, 2026 1:35 pm

The following parts were removed from a 1926 Model T Coupe. I am not familiar enough to know if some are correct / or if they fit other years. *The rod from the firewall to the radiator...$10. *Radiator shield trim strip...$5. *Horn bracket from the headlight cross bar...$25. **Sorry, but I can't figure out how to upload pictures. Email me at...

0 Replies

306 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:35 pm
Model TT Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:23 pm

by 1926TTExpress » Sun Jan 18, 2026 1:23 pm

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door. The other two(2) will fit either door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com...

0 Replies

178 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:23 pm
Model TT Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:21 pm

by 1926TTExpress » Sun Jan 18, 2026 1:21 pm

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com Parts are in Byron, GA.

0 Replies

136 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:21 pm
1926-7 Hood and Misc. Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:08 pm

by 1926TTExpress » Sun Jan 18, 2026 1:08 pm

*The hood fits 1926-27 Model T cars. It is an original part. It was disassembled, sandblasted, cracks welded, straightened, epoxy primed, and reassembled. It will need very little work to put on a car...$300. *The fender fits 1926-27 Model T cars. It is an original right front. It is repairable...$40. *The headlights(2) and reflectors(3) may be...

0 Replies

149 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:08 pm
FS ECCT - Brand New!

Last post by MKossor « Sun Jan 18, 2026 12:57 pm
Replies: 6
by MKossor » Sat Apr 26, 2025 1:02 pm

First post

Its that wonderful time of the year again!
Time to test and tune Model T coils for the Summer Touring season.

Learning the art of coil tuning is fun and easy to do with the right tools and videos.
Taking an active roll in how well your Model T runs also adds a very satisfying component to the Model T driving experience.

ECCT - Complete Test...

Last post

With snow on the ground its the perfect time to learn the art of coil tuning and play an active roll in how well your engine runs this touring season.

Check out the MTFCA Coil Testing and Tuning Webinar on Youtube:

Its a great review of the Model T ignition system, Model T coils; how they work and how to properly tune Model T Coils.
Great...

6 Replies

1783 Views

Last post by MKossor
Sun Jan 18, 2026 12:57 pm
Timer - Maintenance Free

Last post by MKossor « Sun Jan 18, 2026 12:42 pm

by MKossor » Sun Jan 18, 2026 12:42 pm

Tired of messy timer maintenance every 500 Miles? The Surging, jerking, skipping, missing.... Try an Ideal Timer (I-Timer). It's a direct drop in replacement for the stock Model T timber yet completely maintenance Free.

Start on battery and run on Magneto OR battery, the I-Timer is immune to timing cover misalignment and provides reliable coil...

0 Replies

178 Views

Last post by MKossor
Sun Jan 18, 2026 12:42 pm
Complete Distributor Conversion

Last post by MKossor « Sun Jan 18, 2026 12:27 pm

by MKossor » Sun Jan 18, 2026 12:27 pm

Complete Distributor Conversion is a lot of work to install timing cover and coil, still requires periodic maintenance and periodic replacement of points and cap. The E-Timer, on the other hand, is a simple drop in alternative that also features automatic timing advance but is completely maintenance free, non-contact and never wares out for about...

0 Replies

193 Views

Last post by MKossor
Sun Jan 18, 2026 12:27 pm

New Topic

10472 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum