Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45008 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
15 touring
Replies: 2
by
Nv Bob » Sun Sep 25, 2022 11:54 pm
First post
A very nice 15 touring great paint and uphostry
Has Buffalo wires ruckstel and rockies
Nice top I busy redoing the engine and lost storage for the winter
What I've done New scat crank new rods pistons timing gears adjustable lifters rings trans redone
Will be back b in the car soon make an offer I'm working on getting this car back into shape...
Last post
You may want to move this over to Classified - Vehicles for better exposure. Also, include some contact information in case a non-MTFCA member would want to get ahold of you. Looks nice. Good luck!
- 2 Replies
- 761 Views
-
Last post by TheSaintDiscJockey
Mon Sep 26, 2022 4:40 am
-
-
- 3 Replies
- 696 Views
-
Last post by havnfun
Sun Sep 25, 2022 10:20 pm
-
-
Want To Buy These Spindles
Replies: 1
by
Bill Everett » Sun Sep 25, 2022 8:25 pm
First post
These are sometimes called Offset Spindles; what they do is make steering considerably easier.
If you have a set, or even just one, or know anyone who might want to part with theirs, please let me know.
Thank you. offset t spindles rear of car facing forward.jpg
offset t spindles b.jpg
offset t spindles a.jpg
Last post
I have a pair of RAJO offset I will sell. Not cheap. Email me.
- 1 Replies
- 617 Views
-
Last post by Dan Hatch
Sun Sep 25, 2022 9:05 pm
-
-
FS AEROMORE EXHAUST WHISTLE
Replies: 1
by
Mark Chaffin » Fri Sep 23, 2022 11:16 am
First post
Aeromore exhaust whistle. Works as it should. No visible damage $125 plus $21.95 domestic shipping. Mark Chaffin (951) 805 0928
20220923_073553.jpg
20220923_073607.jpg
Last post
Reduced to $125 with domestic shipping included. 😀
- 1 Replies
- 557 Views
-
Last post by Mark Chaffin
Sun Sep 25, 2022 7:35 pm
-
-
FS EARLY IGNITION SWITCH AND AMMETER
Replies: 6
by
Mark Chaffin » Sat Sep 24, 2022 5:21 pm
First post
One very nice original early (Cast arm) ignition switch with early Ford script ammeter. Also includes original Ford script key. Price is $150 with domestic shipping included. Mark Chaffin (951) 805 0928
20220924_134836.jpg
20220924_134855.jpg
Last post
Pending sold to Mark. Thank you all for your input and interest. 😀
- 6 Replies
- 1046 Views
-
Last post by Mark Chaffin
Sun Sep 25, 2022 7:31 pm
-
-
Found! ISO ‘26 rear passenger side fender ‘26 Roadster
Replies: 6
by
QGolden » Fri Sep 02, 2022 10:11 pm
First post
Rear passenger side fender (is that considered rear right or rear left?) took a hit. Revealing that it was mostly constructed of bondo, and aluminum tape. Looking for another that is not mostly body filler.
Anyone know if the fiberglass ones would match if put on one side only? Car is a driver not a showpiece, it was assembled from a mix of...
Last post
I saw a set of fiberglass ones the other day on a T looked really good but when the car ran the headlights sure shook, I think the fender brace would of really helped.
This need was for the rear fender, I contemplated fiberglass or just removing them altogether and converting it to a speedster, but a nice fender was offered for a very fair...
- 6 Replies
- 1198 Views
-
Last post by QGolden
Sun Sep 25, 2022 5:01 pm
-
-
- 3 Replies
- 818 Views
-
Last post by JTT3
Sun Sep 25, 2022 1:37 pm
-
-
FS EARLY KINGSTON COIL BOX SOLD
Replies: 7
by
Mark Chaffin » Sun Sep 18, 2022 3:18 pm
First post
Very nice complete early Kingston coil box with Kokomo Electric switch with key. Also includes four early coil units. Top has some damage. Box serial number 90416. Overall in great condition. Price was $800 now $500 domestic shipping included. Mark Chaffin (951) 805-0928
20220918_114735.jpg
20220918_114745.jpg
20220918_114845.jpg...
Last post
Sold to Phillip. Thank you
- 7 Replies
- 1359 Views
-
Last post by Mark Chaffin
Sun Sep 25, 2022 12:25 pm
-
-
WTB - Stipe cam
Replies: 5
by
Steve Hughes » Sun Sep 18, 2022 2:46 pm
First post
I have been on the waiting list for a Stipe cam for quite a while. When I contacted them the other day they said they were still several months out for these. I have an engine build that I would like to finish up and would like to find either a Stipe 280 or preferably a 290 cam. Does anyone out there have one that they would be willing to part...
Last post
One more time to the top, then I guess I give up.
- 5 Replies
- 1203 Views
-
Last post by Steve Hughes
Sat Sep 24, 2022 10:25 pm
-
-
Nickel babbitt
Replies: 3
by
Melba Nolan » Sat Sep 24, 2022 4:02 pm
First post
For sale: 3 bars of nickel babbitt. $50 each plus postage
20220920_182809.jpg 20220920_182751.jpg
Last post
sold pending payment
- 3 Replies
- 767 Views
-
Last post by Melba Nolan
Sat Sep 24, 2022 6:35 pm
-
-
FS - Misc Model T Parts - SOLD
Replies: 2
by
FlatsRat » Sat Sep 24, 2022 10:53 am
First post
I need to make some room. My dad built a Model T in 1988 and it's time to move his left-over parts that he accumulated. I am looking for someone locally who would be interested. The parts are located in New Baltimore, MI. Since I am not a Model T expert, I can't catalog and name everything, the pictures are posted of what I have. I may have...
Last post
Sale Pending
- 2 Replies
- 699 Views
-
Last post by FlatsRat
Sat Sep 24, 2022 2:23 pm
-
-
SOLD New high volume aluminum intake manifold
Replies: 1
by
FATMAN » Fri Sep 23, 2022 11:09 am
First post
Sold
Never installed high volume aluminum intake manifold
dealers get 189.00
how about 150.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please
Last post
Bob,
I called and left a voice message about this intake.
Thanks— Shannon
- 1 Replies
- 671 Views
-
Last post by Shannon_in_Texas
Sat Sep 24, 2022 1:50 pm
-
-
- 0 Replies
- 469 Views
-
Last post by Layden Butler
Sat Sep 24, 2022 1:28 pm
-
-
Model T Trailer
by
colonelpowers » Sat Sep 24, 2022 11:34 am
Hello Everyone,
I have a model t trailer that I don't really need. It is pretty solid it just needs a rim and tire for the other side. I do have an old set of more modern rims and tires that do hold air that will go with it. I am asking 400 dollars.
- 0 Replies
- 707 Views
-
Last post by colonelpowers
Sat Sep 24, 2022 11:34 am
-
-
re-babbitted ball caps for sale
Replies: 1
by
Gene_French » Sun Jul 17, 2022 10:15 am
First post
Model T Ford ball cap , re-babbitted and finish machined to standard diameter or your specified diameter … price is $50 exchange plus $16.50 priority mail postage in lower 48 states … actual postage outside this area or international … Gene French 49519 cr.23 Nunn, Co. 80648 phone 970-581-2808 ballcap.jpg
Last post
to the top again ...thanks MTFCA
- 1 Replies
- 612 Views
-
Last post by Gene_French
Sat Sep 24, 2022 11:23 am
-
-
FS oval fast tank
Replies: 5
by
Nv Bob » Sat Oct 02, 2021 1:02 pm
First post
Good orginal oval gas tank been dry for 10+ years
Lite rust inside but should not be an issue
Has mounting bands all decent make me an offer + shipping or pickup
Bob
Sparks nv
Jalopyt@yahoo.com
Last post
EAE5559B-0293-485C-8DAD-5E2224F01A70.jpeg
- 5 Replies
- 1883 Views
-
Last post by ThreePedalTapDancer
Sat Sep 24, 2022 11:04 am
-
-
KR Wilson Combination Machine for T and A
by
TrentB » Sat Sep 24, 2022 10:10 am
This is a complete KR Wilson combination machine set up for both Model T and A. It includes both pouring jigs (with pouring blocks), both boring jigs with false camshafts, the cylinder boring bar with guides for both T and A, and the special micrometer for setting the cutters, the rear camshaft bearing reamer with extension, main bearing reamers...
- 0 Replies
- 696 Views
-
Last post by TrentB
Sat Sep 24, 2022 10:10 am
-
-
oil cap
by
Melba Nolan » Sat Sep 24, 2022 8:14 am
For sale: I have a mushroom style oil breather cap. It has 6 indentions. I don't know what to ask for it so I am going to take offers. If interested email melbanolan@aol.com
20220924_070252.jpg 20220924_070233.jpg
- 0 Replies
- 499 Views
-
Last post by Melba Nolan
Sat Sep 24, 2022 8:14 am
-
-
Brass goodies
Replies: 11
by
Craig Leach » Tue Sep 06, 2022 10:29 am
First post
Hi Guys,
I picked up a cookie tin full of brass parts and I'm dumber than a sack of hammers when it comes to this early stuff. So I'm not sure what I have.
As I understand ford had more than one company making bodies in 09 & 10 and parts didn't always come with Ford script on them.
None of these have Ford script. They maybe repop as I see most of...
Last post
Brass Goodies SOLD Thanks MTFCA
- 11 Replies
- 2311 Views
-
Last post by Craig Leach
Sat Sep 24, 2022 12:50 am
-
-
KR Wilson Model T Rod Jig
Replies: 1
by
TrentB » Fri Sep 23, 2022 8:52 pm
First post
KR Wilson rod alignment jig for Model T. The arbor fits standard (1.250), 0.010 undersize, 0.020 undersize, and .030 undersize connecting rods. This jig is complete and in very good condition. Pick up at Hershey available Red field, spaces RCF 38-45. $325.00.
C9142067-6234-4BBE-808E-D9DF5F214AB4.jpeg
Last post
Hello Trent,
I bought your KRW Babbitt pouring jig, I would like to talk with you about this alignment tool before you sell it. May I call you on Saturday?
Ken
- 1 Replies
- 714 Views
-
Last post by Ken Buhler
Sat Sep 24, 2022 12:01 am
-
-
KR Wilson Model T Pan Jig
Replies: 1
by
TrentB » Fri Sep 23, 2022 9:28 pm
First post
KR Wilson Model T pan jig for sale. Jig is in good condition as shown in the picture below. Jig only. Crankshafts, cylinder head etc on top of the jig are not included. Delivery to Hershey for pick up available. $2500.
Last post
PM sent via MTFCA.
- 1 Replies
- 741 Views
-
Last post by Mark Chaffin
Fri Sep 23, 2022 11:01 pm
-
-
FS 1913/14 Carbide Generator
Replies: 4
by
25tfire » Thu Sep 22, 2022 5:11 pm
First post
For Sale 1913/14 Running Board Carbide Generator in pretty nice shape but does need some repair. $650. Pictures to your email or text to your phone.
Last post
More pictures from Jim
- 4 Replies
- 831 Views
-
Last post by JTT3
Fri Sep 23, 2022 10:17 pm
-
-
FS: E&J Brass "1908" Tail Light
Replies: 2
by
Rodger Erickson » Sat Sep 17, 2022 9:52 pm
First post
FS: One refurbished E&J Pat. Dec 9, 1908 Tail Lamp. This lamp is kind of a hodge-podge of original and repop parts. The top and bottom are original, the back, sides, glass, and reflector are all reproduction. The top and bottom are soldered to the back like our reproduction lamps but it actually looks OK. The fount is original but does show a few...
Last post
Is your light still for sale
Please call if you can
Ron Jackson 720-220-4745
- 2 Replies
- 640 Views
-
Last post by Rjackson
Fri Sep 23, 2022 10:06 pm
-
-
FS 26/27 Model T Hood
Replies: 1
by
25tfire » Thu Sep 22, 2022 10:56 am
First post
For Sale is a 1926 or 1927 Hood in very nice condition with only light surface rust due to moisture in the air, it has been blasted, Asking $350 plus shipping. Pictures to your email or phone text. Jim 970-373-8864
Last post
Hood has been sold Thanks Shannon and MTFCA
- 1 Replies
- 516 Views
-
Last post by 25tfire
Fri Sep 23, 2022 8:31 pm
-
-
Free #10 Sheet Metal Screws You Pay Shipping
Replies: 3
by
Rodger Erickson » Fri Sep 09, 2022 10:28 pm
First post
Free: Sheet Metal Screws, self tapping, I believe these are a size 10, takes a 5/16 wrench. The smaller ones are approx 1/2 and the longer ones are 7/8. Yes I know they're not really for Model T's but the Model T Guys are the only ones left who are still interested in stuff like this. You pay shipping; I can fit about 3-4 lbs in a small flat rate...
Last post
I would be interested if Still available. Call me at five 86three 0six1887 thank you
- 3 Replies
- 712 Views
-
Last post by mike catlin
Fri Sep 23, 2022 8:21 pm
-
-
Wanted: New or excellent used Radiator
Replies: 1
by
Mike Lebsack-Iowa » Fri Sep 23, 2022 4:51 pm
First post
Does anyone have a new or excellent used tall Model T radiator that you can part with? Please contact me at 31-four thirty-49 ninety five. Thanks, Mike
Last post
Correction: call me at 319- four thirty- 49 ninety five.
- 1 Replies
- 434 Views
-
Last post by Mike Lebsack-Iowa
Fri Sep 23, 2022 4:52 pm
-
-
FS SCANDINAVIA BAND LININGS NOS
Replies: 3
by
Mark Chaffin » Fri Sep 23, 2022 12:40 pm
First post
One set of Scandinavia band linings (09-25) NOS $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805 0928
20220923_093328.jpg
20220923_093353.jpg
Last post
Bands have been sold.
- 3 Replies
- 617 Views
-
Last post by Mark Chaffin
Fri Sep 23, 2022 3:50 pm
-
-
FS 11-16 hood former
Replies: 3
by
T Cruiser » Thu Sep 22, 2022 10:48 pm
First post
Good usable hood former ,has small repair on one side $75.00 plus shipping. Call Ted at.503-728-3476 No Text or Emails
Last post
Ted thanks bob
- 3 Replies
- 658 Views
-
Last post by Nv Bob
Fri Sep 23, 2022 3:30 pm
-
-
Free 1 1/2 lbs 6-32 x 5/8 Screws
Replies: 3
by
Rodger Erickson » Sun Sep 18, 2022 2:17 pm
First post
Free: 6-32 x 5/8 zinc plated slotted round head screws, approx. 1 1/2 lb. You pay shipping. It seems only Model T guys are interested in stuff like this so i'm posting it here. Thanks for looking.
Last post
Hello Roger, I’ll take the round head screws
and 2 Flat rate box’s of the
Sheet metal screws too if they are still available.
I have your address so I’ll just need a total.
Many thanks for the Rivets also.
- 3 Replies
- 633 Views
-
Last post by Charlie_26_TT_Ccab
Fri Sep 23, 2022 3:05 pm
-
-
F-S Transmission Quick change band set 1926-7
Replies: 2
by
FATMAN » Fri Sep 23, 2022 11:04 am
First post
Nice set of 26-7 Transmission quick change bands 60.00 plus postage
also 1 only narrow slotted ear band 20.00 plus postage, Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please
Last post
E mail never came, Bob
- 2 Replies
- 559 Views
-
Last post by FATMAN
Fri Sep 23, 2022 2:16 pm
-
-
FS 11-16 firewall brackets
Replies: 1
by
T Cruiser » Thu Sep 22, 2022 10:42 pm
First post
Nice original pair brackets $55.00 ,free shipping in cont US. Call Ted at 503-728-3476. No Texts orEmails
Last post
Sold, thank you
- 1 Replies
- 423 Views
-
Last post by T Cruiser
Fri Sep 23, 2022 12:58 pm
-
-
FS 1911 torpedo windshield support Bracket
Replies: 1
by
T Cruiser » Thu Sep 22, 2022 10:34 pm
First post
Pair of new repo brackets,cost $95.00 in the catalogs , sell for $65.00 free shipping in cont. US. Call Ted at 503-728-3476 . No Texts orEmails.
Last post
Sold, thank you.
- 1 Replies
- 488 Views
-
Last post by T Cruiser
Fri Sep 23, 2022 12:51 pm
-
-
FS EARLY HEINZ COILS (SOLD)
Replies: 2
by
Mark Chaffin » Fri Sep 23, 2022 11:12 am
First post
Set of eight early Heinz coils $400 plus $21.90 domestic shipping. Mark Chaffin (951) 805-0928
20220923_073927.jpg
20220923_074045.jpg
20220923_074112.jpg
Last post
No markings either side.
20220923_084844.jpg
20220923_084742.jpg
- 2 Replies
- 523 Views
-
Last post by Mark Chaffin
Fri Sep 23, 2022 11:59 am
-
-
SOLD 1926-7 Emergency brake bands, good clips 1 pair
by
FATMAN » Fri Sep 23, 2022 11:07 am
SOLD to Bill
pending payment26-7 brake shoes or bands, good clips one slight bend should be easy fix or use as is will need new lining, 40.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please
thank you forum
- 0 Replies
- 445 Views
-
Last post by FATMAN
Fri Sep 23, 2022 11:07 am
-
-
FS 11-16 hood former
Replies: 2
by
T Cruiser » Thu Sep 22, 2022 11:04 pm
First post
Very nice original hood former,no rust pits or damage. $125.00 plus shipping.Call Ted at 503-728-3476 No Texts or Emails
Last post
Oops, I didn't read no emails. I will call in the AM.
Ken
- 2 Replies
- 623 Views
-
Last post by Ken Buhler
Fri Sep 23, 2022 12:39 am
-
-
Model T main bearing mold
Replies: 10
by
Gene_French » Sat Feb 06, 2021 9:00 am
First post
mainbearing mold for model T Ford … price $100 plus $13.60 postage in lower 48 states … actual postage outside this area or international … I am unable to add photos as yet ! email for photos or information … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t main.jpg t main top.jpg
Last post
Gene, sent you an email
- 10 Replies
- 3015 Views
-
Last post by havnfun
Thu Sep 22, 2022 11:14 pm
-
-
FS 13-16 spring shackles
by
T Cruiser » Thu Sep 22, 2022 11:11 pm
Set used spring shackles. $35.00 free shipping in cont. US. Call Ted at 503-728 -3476. No Texts or Emails
- 0 Replies
- 506 Views
-
Last post by T Cruiser
Thu Sep 22, 2022 11:11 pm
-
-
FS 9-12 spring shackles
by
T Cruiser » Thu Sep 22, 2022 10:57 pm
Set of four shackles. Rear set is new very nice repos . Front set used originals. $120.00 for all ,free shipping in cont US. Call Ted at 503-728-3476 No Texts or Emails
- 0 Replies
- 486 Views
-
Last post by T Cruiser
Thu Sep 22, 2022 10:57 pm
-
-
WTB Model B intake
Replies: 3
by
Tmooreheadf » Wed Sep 21, 2022 7:59 pm
First post
I’m in need of a 1932 Ford model B intake manifold. Let me know if you might have one!
Thanks
Tom
Last post
Thanks for the responses.
- 3 Replies
- 793 Views
-
Last post by Tmooreheadf
Thu Sep 22, 2022 9:37 pm
-
-
head gasket sold
Replies: 4
by
Melba Nolan » Thu Sep 22, 2022 6:34 pm
First post
For sale: Steel head gasket. New still in package. 09/27 $18 plus postage
Last post
spoken for
- 4 Replies
- 798 Views
-
Last post by Melba Nolan
Thu Sep 22, 2022 9:20 pm
-
-
WTB Lever Extension
by
GG Gregory » Thu Sep 22, 2022 8:51 pm
Does anyone have a orphan chrome spark/gas extension lever they’d sell ? The one on my spark lever fell off and was lost.
- 0 Replies
- 443 Views
-
Last post by GG Gregory
Thu Sep 22, 2022 8:51 pm
-
-
Phoenix Brand Bermuda Bell (SOLD)
Replies: 2
by
ThreePedalTapDancer » Wed Sep 21, 2022 2:17 pm
First post
This is an original 1920s Phoenix 707 Bermuda Bell. It is a heavy 6 inch diameter brass bell with nickle plate, not a cheap spun aluminum reproduction. It mounts under your floorboard with the faceplate and 4 screws. The protruding foot stem is pushed down, emitting a very loud “ding dong!” Excellent overall condition. The nickel plate is in...
Last post
Ed,
Sent you an email.
Tnx,
Ron in HSV
- 2 Replies
- 819 Views
-
Last post by CDooREDW
Thu Sep 22, 2022 3:10 pm
-
-
WTB Taper Leaf Front Spring
Replies: 5
by
lnoller » Thu Sep 22, 2022 11:16 am
First post
Does anyone have one that they seriously want to sell? Thanks
Last post
Mike
I teach at Missouri State University. I have classes until 10:00 tonight. I really don't have stuff pulled out yet. Have two trunks for 24 roadster but is in the overhead of the barn.
- 5 Replies
- 844 Views
-
Last post by lnoller
Thu Sep 22, 2022 1:47 pm
-
-
1928 Chevrolet Head
Replies: 1
by
lnoller » Wed Sep 21, 2022 3:22 pm
First post
For Sale. I have a 1928 Chevrolet Head that is complete. I have the manifolds, valve cover, rocker arms, push rods, valves and I think that there is even the distributor off that car. I will take $100 for all of it if you want to come and get it. Lot more stuff to come, cleaning out the shed.
Last post
PM sent for purchase of the head.
- 1 Replies
- 710 Views
-
Last post by Richard K
Thu Sep 22, 2022 12:21 pm
-
-
WTB
by
lnoller » Thu Sep 22, 2022 11:13 am
WTB I am looking for a front taper leaf spring. Does anyone have one that they seriously want to sell? Thanks
- 0 Replies
- 497 Views
-
Last post by lnoller
Thu Sep 22, 2022 11:13 am
-
-
1914 Ford Touring for sale
Replies: 1
by
12chalmers » Wed Sep 21, 2022 9:42 pm
First post
For Sale 1914 Ford Touring originally restored in the 50 s. Original body and sheet metal. New brass works radiator, New 1915 hood(i have the original hood) Distributor, Ruxtell, Large Rocky mountain brakes, New top,boot and door panels. Upolstry and paint good.New tires and tubes. Later engine with starter and generator 12 volt. Very reliable...
Last post
should list this in Vehicles for Sale section. Haven't checked to see if you did yet, though. Just sayin
- 1 Replies
- 770 Views
-
Last post by TWrenn
Thu Sep 22, 2022 10:24 am
-
-
Kingston Coil Box
Replies: 2
by
Melba Nolan » Wed Sep 21, 2022 6:53 pm
First post
For sale: Very good condition Kingston coil box with coils. $800.00 plus postage
20220607_085505.jpg 20220607_085349.jpg 20220607_090342.jpg 20220607_085828.jpg 20220607_085333.jpg
Last post
The coils are actually Heinze coils.
- 2 Replies
- 716 Views
-
Last post by Darren J Wallace
Thu Sep 22, 2022 9:09 am
-
-
Model T Parts Sale - Estate Liquidation
Replies: 7
by
reifjr » Tue Sep 13, 2022 11:24 am
First post
I'm currently looking for buyers that can help me liquidate my late Father's selection of Model T parts. There's a mixture of 26/27 parts as well as some parts for 1925 and earlier Model Ts. The Ruckstell parts (with 2 axles halves), engines, transmissions and frames will likely have of the most interest. However, there's also some desirable items...
Last post
i am interested in your radiator top tank can you email pics and price if you are still selling parts..thanks dino
- 7 Replies
- 2299 Views
-
Last post by dinosbunny
Thu Sep 22, 2022 12:16 am
-
-
Buffalo wire wheel set, 30 x 3 1/2
Replies: 4
by
pete eastwood » Wed Sep 21, 2022 3:38 pm
First post
Buffalo wheel set; 4 wheels, 2 front hubs, 2 rear hubs.
The wheels have new rims & spokes.
The hubs are new and have the correct locking devices.
Paint them & put 'em on!
$4,000.00
Pete Eastwood
Last post
wheels are sold
Don’t see a set of good wheels and hubs very often, much less for a price like this! Hope they’re rollin down the road soon!
- 4 Replies
- 1111 Views
-
Last post by Kevin Pharis
Thu Sep 22, 2022 12:06 am
-
-
W T B 30x 3 1/2 TIRE (S)
Replies: 8
by
RichJ » Thu Aug 25, 2022 11:39 am
First post
Anyone in Western Pa Ohio West Va or beyond,
have anything decent?
Rich 561 262 o393.
Last post
I will be bringing 2 decent firestone 30x3 1/2 and one 30x3 firestone to Hershey space c4k. 31/32
- 8 Replies
- 1459 Views
-
Last post by Donsolcars
Wed Sep 21, 2022 4:12 pm
-
-
FS: Fancy E&J Tail Light c. 1915
Replies: 4
by
Rodger Erickson » Sun Sep 18, 2022 5:41 pm
First post
FS: A Fancy E & J tail light ca. 1915. Similar to the ones used on the Coupelet and Centerdoor Sedan for that year, but not an exact match (I think the lenses are wrong and the mounting bracket is in the wrong place. This light is in unusually good condition, no dings or serious rust issues. Asking $100 not including shipping. Thanks for looking....
Last post
Spoken for.
Thanks, MTFCA.
- 4 Replies
- 961 Views
-
Last post by Rodger Erickson
Wed Sep 21, 2022 12:24 pm
-
-
SOLD: Three Large All Brass Sidelamps and Taillamp For Parts or Restoration. 100.00 INCLUDING shipped
Replies: 3
by
GGZ » Tue Sep 06, 2022 11:25 am
First post
SOLD!
Price reduced at 100.00 including shipping in the USA.
Here are three and large all brass lights for parts or restoration. There are : CM Hall side light, CM Hall tail light, and the third one is Solar. Sold as-is. Good for parts or restoration.
Price is 150.00 INCLUDES shipping within the USA.
Email at: motoringicons@hotmail.com or call...
Last post
SOLD!!!!!!!!!.
- 3 Replies
- 1000 Views
-
Last post by GGZ
Wed Sep 21, 2022 12:09 pm
-
-
- 3 Replies
- 1542 Views
-
Last post by RichardW
Wed Sep 21, 2022 11:02 am
-
-
FS - Aluminum Transmission Cover w/pedals - SOLD
Replies: 8
by
OldFord » Fri Sep 16, 2022 3:13 pm
First post
For sale is a later (14-15 I think) aluminum transmission cover with pedals. $250 delivered to Hershey C4Y34-37. 518-755-0986
Last post
Hello Frank, I'm still interested in Your hogs head.
Steve
- 8 Replies
- 1290 Views
-
Last post by love1913
Wed Sep 21, 2022 9:03 am
-
-
FS ALUMINUM TRANSMISSION COVER SOLD
Replies: 8
by
Mark Chaffin » Tue Aug 09, 2022 8:31 pm
First post
Late 11' to 12' aluminum transmission cover. No reinforcements around bolt bosses. Pedals in above average condition. Shafts are tight in the holes. Later incorrect inspection cover. Will also need reverse and brake clutch cams to complete. Price was $400 now $300 plus domestic shipping. Mark Chaffin (951) 805-0928.
20220809_170756.jpg...
Last post
Sorry Greg. Richard beat you by a few hours. Thank you for your interest though.
- 8 Replies
- 1779 Views
-
Last post by Mark Chaffin
Tue Sep 20, 2022 9:42 pm
-
-
E & J FORD Model 666 mirror is good
Replies: 4
by
Melba Nolan » Fri Jul 22, 2022 10:20 pm
First post
For Sale: Ford Model 666 gas light made by E&J. Brass light in very good condition. Just needs cleaned up and polished. There are a few small dents
which could be removed. It need the headlight lens and gas igniter It does have a repair on bonnet top. mirror is good.
$200 plus postage
20220722_200704.jpg 20220722_200214.jpg 20220722_200549.jpg...
Last post
move to top
- 4 Replies
- 1349 Views
-
Last post by Melba Nolan
Tue Sep 20, 2022 5:20 pm
-
-
Sold E&J 666 headlights
Replies: 5
by
Dollisdad » Sat Sep 17, 2022 9:21 pm
First post
Original 666 headlights. Dents, no burners. Good mirrors, one lense. $400. FEB462B5-3B9B-441F-A809-B4364D604F86.jpeg F903CEDA-0E7A-467D-8C7B-099B5CE54519.jpeg 660237CF-F9F3-4866-9D16-42C14A87AA58.jpeg 0C373E45-593E-4E27-B093-657367D227F9.jpeg
Last post
Sold to Dave
- 5 Replies
- 1119 Views
-
Last post by Dollisdad
Tue Sep 20, 2022 3:19 pm
-
-
- 2 Replies
- 682 Views
-
Last post by FATMAN
Tue Sep 20, 2022 2:40 pm
-
-
WTB Crystal Timer Ring (Pending)
Replies: 3
by
Tadpole » Sun Sep 18, 2022 8:19 am
First post
I am looking for a new aluminum ring to run a Crystal Timer, such as the ones made by the late Bob Scherzer. Anyone have any left over? Thanks!
Last post
My post should have said the reproduction ring.
- 3 Replies
- 734 Views
-
Last post by Marty Bufalini
Tue Sep 20, 2022 2:38 pm
-
-
SOLD 21" Wire wheel super nice, for spare or use
Replies: 1
by
FATMAN » Tue Sep 20, 2022 11:26 am
First post
SOLD
This is a very nice 21 wire wheel for the Model T Ford
not pitted, no flat spots, good lug holes 135.00 plus ship, Bob
815-633-7244
modelt2001@comcast.net
Last post
Sold, thank you forum
- 1 Replies
- 609 Views
-
Last post by FATMAN
Tue Sep 20, 2022 1:14 pm
-
-
Ajax jack for sale Price Lowered again
Replies: 13
by
Dan Hatch » Sun Feb 20, 2022 3:49 pm
First post
Here is a jack. Think it is 25/27. Marked Ajax NO 014.
$50.00 + shipping. Email me at address in pictures. Thanks Dan
6F28922E-D31D-4318-B5EE-28AE9542C3F1.jpeg
1E545991-A455-4143-9E84-A83C57246B62.jpeg
6D5C7DA0-4A4C-4106-A57B-5C4CD30F7FD7.jpeg
73127869-9880-498A-BA21-028E01623C53.jpeg
96038382-867B-4DCB-806E-39B8498C5580.jpeg
Last post
Sold pending pickup
- 13 Replies
- 2862 Views
-
Last post by Dan Hatch
Tue Sep 20, 2022 12:50 pm
-
-
WTB Door Latch for '16 touring.
Replies: 1
by
Campbell Tellman » Tue Sep 20, 2022 11:28 am
First post
Hey all,
Looking for a working door latch and catch for the front pass or rear driver's side door for a '16 touring car.
Thanks,
Campbell Tellman II
Beaufort, NC
Last post
I think I ve got you. Email for photos. ctleonard64@gmail.com
- 1 Replies
- 468 Views
-
Last post by CTLeonard
Tue Sep 20, 2022 12:05 pm
-
-
Exhaust Cutout FS
Replies: 1
by
Dan Hatch » Sun Sep 11, 2022 2:49 pm
First post
Here is what maybe a homemade exhaust cutout. Looks like for a whistle not sure. $20.00 + shipping. Email me at address in pictures. Thanks
A11FC588-D9E7-4836-A303-E739137FFA85.jpeg
A941DF3B-B00F-4BBB-BF6C-17A7E06B3428.jpeg
70CBC53B-E03D-46AA-980E-53E0FC0DEEC1.jpeg
C5C1CCC7-7AD8-47DE-8B1A-11F49B00BBA8.jpeg
Last post
Back to the top
- 1 Replies
- 636 Views
-
Last post by Dan Hatch
Tue Sep 20, 2022 5:37 am
-
-
Headlight Bucket off center FS
Replies: 5
by
Dan Hatch » Fri May 27, 2022 3:24 pm
First post
I think someone was looking for one of these. Has the socket off center. $20.00 + shipping. Email me at address in pictures. Thanks Dan
35C5BB34-9597-4283-8D5D-6FABA6AC9FA3.jpeg
F5DF818F-D5D1-4ACF-8C0C-6D0C27C320BA.jpeg
1C68419E-C6BC-444E-9642-623D49803838.jpeg
BC23B3C0-7F19-4497-8D49-E04B9C522A30.jpeg...
Last post
Back to the top
- 5 Replies
- 1284 Views
-
Last post by Dan Hatch
Tue Sep 20, 2022 5:35 am
-
-
- 2 Replies
- 580 Views
-
Last post by Mark Chaffin
Tue Sep 20, 2022 12:16 am
-
-
- 0 Replies
- 533 Views
-
Last post by Layden Butler
Mon Sep 19, 2022 7:54 pm
-
-
- 3 Replies
- 661 Views
-
Last post by John iaccino
Mon Sep 19, 2022 3:36 pm
-
-
F-S Rare under running board tool boxes with locks & keys
Replies: 3
by
FATMAN » Mon Sep 19, 2022 12:56 pm
First post
Original factory toolboxes that mount under the running boards
no need to drill any more holes just use a longer bolt that goes through the running board brackets
great for tools, spare inner tubes and repair arts, I only have these two boxes price is 175.00 each plus postage
815-633-7244
modelt2001@comcast.net
no p.m.'s please
Bob
Last post
Sold, to Steve, pending payment
thank you,
- 3 Replies
- 1006 Views
-
Last post by FATMAN
Mon Sep 19, 2022 2:23 pm
-
-
4 Dip Pan FS
Replies: 1
by
Dan Hatch » Sun Sep 18, 2022 1:51 pm
First post
Here is a 4 dip pan that needs arms. Rest of pan looks good, wishbone socket looks good. Cleaning out the swap meet trailer.
$15.00. PICKUP ONLY. No shipping. Look at pictures. Email me at address in pictures. Thanks Dan
70AA2AD3-959A-4911-A34F-23DA79AA36BC.jpeg
3E3B18EE-CF7B-4B26-AC84-81A26B0BDD49.jpeg...
Last post
Back to the top
- 1 Replies
- 535 Views
-
Last post by Dan Hatch
Mon Sep 19, 2022 12:58 pm
-
-
30x3.5 Firestone wheel and rims FS
Replies: 1
by
Dan Hatch » Sun Sep 18, 2022 1:57 pm
First post
Here is a 30x3.5 Firestone front wheel and two rims. The wheel seems solid, hub looks good. The rims appear to be useable.
$50.00 pickup here. No shipping. Email me at address in pictures.
2DCF711A-EFCC-4CE5-8900-FB61CB68125C.jpeg
45D89287-130D-4D10-93DE-03D8AB30FBB4.jpeg
Last post
Sold pending pickup
- 1 Replies
- 555 Views
-
Last post by Dan Hatch
Mon Sep 19, 2022 12:57 pm
-
-
Oval gastank fs. Sold
by
CTLeonard » Mon Sep 19, 2022 11:35 am
Good solid tank. Has some rust inside. 150.00 plus shipping. ctleonard64@gmail.com IMG_20220919_103014836.jpg IMG_20220919_103111470.jpg IMG_20220919_103053196.jpg IMG_20220919_103037199.jpg IMG_20220919_103025364.jpg
- 0 Replies
- 460 Views
-
Last post by CTLeonard
Mon Sep 19, 2022 11:35 am
-
-
Kingston Model L4
Replies: 2
by
Melba Nolan » Wed Sep 07, 2022 9:19 am
First post
FOR SALE: Kingston Model L 4 brass carb $125 plus postage
20220608_204843.jpg 20220608_204853.jpg
Last post
still available
- 2 Replies
- 721 Views
-
Last post by Melba Nolan
Mon Sep 19, 2022 11:32 am
-
-
FS-"Tied" Rear Bumper (Sold)
by
Tadpole » Mon Sep 19, 2022 10:34 am
Sturdy rear bumper off a '25 Coupe, condition is fair with some rust pitting under a coat of black paint. Not sure what other years/body styles it will or won't fit. Bolts to rear body mounts and clamps on the frame at the front. Comes with mounting hardware. $140 OBO.
Located Near Augusta Ky. Pickup only, it's a little weighty.
You can email me...
- 0 Replies
- 544 Views
-
Last post by Tadpole
Mon Sep 19, 2022 10:34 am
-
-
ISO brass touring east coast
Replies: 5
by
Algonac27 » Sat Sep 10, 2022 8:17 pm
First post
ISO brass touring car closer to Michigan the better let me know what you have!!
Last post
Email sent
- 5 Replies
- 1127 Views
-
Last post by Ahr
Mon Sep 19, 2022 9:22 am
-
-
FS 1914 all brass Holley G
Replies: 1
by
Model T Tom » Sat Sep 17, 2022 6:47 am
First post
Super nice Holley. Pat pending carb
No dents or cracks in bowl .
Chock is nice with no play throttle
Shaft has a small amount of play .
$150.00 plus shipping
Tom Butterworth
772-475-9142
Last post
I'll include shipping
- 1 Replies
- 657 Views
-
Last post by Model T Tom
Mon Sep 19, 2022 7:38 am
-
-
New Tires and Tubes!
by
Bill Kerndt » Sun Sep 18, 2022 8:24 pm
Five new Tires and Tubes! I will have five new (still wrapped in plastic) 4 ply black 4:50/4:74-21 UNIVERSAL Tires and five new Tubes in boxes as purchased about a year and a half ago. I will have these new Tires and Tubes at space in Greenfield at Hershey at GBL 26. You can pick them up there and not have to pay any freight! You also may call me...
- 0 Replies
- 723 Views
-
Last post by Bill Kerndt
Sun Sep 18, 2022 8:24 pm
-
-
SOLD… NOS Fitzgerald brand Copper Head Gasket
by
Adam » Sun Sep 18, 2022 7:35 pm
SOLD (pending arrival of funds)… Please email if you want it. Don’t post here or send a pm, I might not see it. Please include address so I can figure shipping. Will ship to USA address only. Thanks!
5A29E5BE-DBCA-473E-9A87-F805A0E0FC99.jpeg
12F96322-13BC-493C-9BA3-07D55FFFB769.jpeg
27AB02DF-86C8-4CD2-8D57-8A9AFD9A6659.jpeg...
- 0 Replies
- 564 Views
-
Last post by Adam
Sun Sep 18, 2022 7:35 pm
-
-
Gas Tank sale
Replies: 1
by
Dan Hatch » Sun Sep 18, 2022 3:22 pm
First post
Here are 2 round tanks. Know nothing about the insides. $10 EACH PICKUP ONLY Brackets are worth more than that.
Email me at address in pictures. Thanks Dan
4BFD250F-F1A9-47C6-853B-2D41C29B57BC.jpeg
163E5800-F383-42BD-8491-FF46727234B1.jpeg
DAB6A476-D355-4F96-A6E7-600994610DDD.jpeg
Last post
Sold pending pickup
- 1 Replies
- 552 Views
-
Last post by Dan Hatch
Sun Sep 18, 2022 6:34 pm
-
-
23/25. Sedan Gas Tank for sale
Replies: 1
by
Dan Hatch » Sun Sep 18, 2022 3:27 pm
First post
Here’s a 23/25 Sedan Tank. Know nothing about the insides. All sealed up. $10 PICKUP ONLY. Email me at address in pictures. Thanks Dan
9E09B98F-607F-4C6E-A58A-F83A0D150E84.jpeg
33144A5F-7709-47C1-97D8-F644C88BC96C.jpeg
8B054CD2-AC39-4259-B49F-7F8CE2231C5E.jpeg
Last post
Sold waiting for pickup
- 1 Replies
- 390 Views
-
Last post by Dan Hatch
Sun Sep 18, 2022 6:33 pm
-
-
WTB: Fun Projects voltage regulator
Replies: 1
by
bmklawt » Sun Sep 18, 2022 3:42 pm
First post
WTB: Fun Projects voltage regulator or is there something else out there I can use besides a cutout.
Thanks much for the help,
Bruce
Last post
Good luck. You can use a diode in place of the mechanical cutout. That will give you a functional system, but it will not provide regulation.
- 1 Replies
- 423 Views
-
Last post by TXGOAT2
Sun Sep 18, 2022 5:03 pm
-
-
Brass Radiator?
Replies: 3
by
Dan Hatch » Sun Sep 04, 2022 1:29 pm
First post
Anyone interested in this Brass Radiator before I cut it up for scrap? 13/14 me thinks. Look at pictures, pickup at 35173. $50.
Email me at address in pictures. Thanks Dan
11B17447-C433-4ECC-8052-86BC7DA05184.jpeg
F97250D7-0458-4CC0-937C-9CCF603CDC41.jpeg
B71E6F17-0260-47A3-9B37-11234A869D96.jpeg
Last post
Sold and picked up
- 3 Replies
- 908 Views
-
Last post by Dan Hatch
Sun Sep 18, 2022 1:44 pm
-
-
WTB - Top Bow Seperator
by
WayneJ » Sun Sep 18, 2022 12:56 pm
I need the male top bow separator for an oval socket 1915. This is for the bow that goes over the windshield.
20220627_180305.jpg
- 0 Replies
- 492 Views
-
Last post by WayneJ
Sun Sep 18, 2022 12:56 pm
-
-
Wanting to buy: Oval Gas Tank.
Replies: 5
by
RonGlowczewski » Thu Sep 15, 2022 12:52 am
First post
Any condition. I currently have no gas tank for my far-from-running 1925 Roadster. I do have the frame brackets, though.
Last post
I've got one coming. Thank you to all who replied.
- 5 Replies
- 991 Views
-
Last post by RonGlowczewski
Sun Sep 18, 2022 11:08 am
-
-
SOLD. NOS Victor head gasket
Replies: 1
by
Adam » Sat Sep 17, 2022 6:16 pm
First post
SOLD (pending payment)… Please email if you want it. Don’t post here or send a pm, I might not see it. Please include address so I can figure shipping. Will ship to USA address only. Thanks!
FC3103A3-9D1C-464F-BEAF-4B96A4360DFF.jpeg
E4237AE6-4C78-4B39-933C-CC248153B2EE.jpeg
6CBEA36D-32FC-4D13-986E-8B005B867492.jpeg...
Last post
Interested. I emailed you.
- 1 Replies
- 687 Views
-
Last post by RonGlowczewski
Sun Sep 18, 2022 11:04 am
-
-
FOR SALE THREE MODEL T HEAD GASKETS
Replies: 4
by
StevenS » Thu Sep 08, 2022 8:50 pm
First post
FOR SALE: Three new Model T head gaskets, and they are numbered 1, 2, 3. Each one is $160 and that includes the shipping too. The #1 gasket is an older gasket but still soft and not brittle. It does have some wrinkles in the copper but no tears in the gasket material. The #2 and #3 gaskets are recently made, the last 10 years. The #3 IS SOLD is...
Last post
TO THE T0P
- 4 Replies
- 1434 Views
-
Last post by StevenS
Sat Sep 17, 2022 11:14 pm
-
-
SOLD 13 steering column
Replies: 2
by
Dollisdad » Sat Sep 17, 2022 9:14 pm
First post
Nice 1913 column. 5F8763BA-AD06-491F-A981-50AB91051CEF.jpeg 367027AE-9750-4B98-ACA8-6637D247E0B2.jpeg 0AAC62E1-7288-4F68-A561-3F2D57D2CCF4.jpeg EA5BC75D-AECB-4DF9-9204-8B9F7DFBE25E.jpeg
Last post
7D4842FD-CE3C-4508-BE3F-B7C2F3F59851.jpeg
- 2 Replies
- 508 Views
-
Last post by Dollisdad
Sat Sep 17, 2022 9:16 pm
-
-
Large brake drums fs. Sold
Replies: 1
by
CTLeonard » Sat Sep 17, 2022 2:07 pm
First post
55.00 for the pair plus shipping IMG_20220917_130359184.jpg IMG_20220917_130003206.jpg
Last post
I will take them if still available
- 1 Replies
- 530 Views
-
Last post by David Mazza
Sat Sep 17, 2022 7:44 pm
-
-
FS brass windshield support rods
Replies: 3
by
KimDobbins » Fri Sep 16, 2022 8:54 pm
First post
1 pair of adjustable windshield support rods. Can be used with any brand of brass windshield, 1909-12. $300.00 plus shipping. kdmks AT att.net.
Last post
Sold to Wayne, please send me your shipping info. Kim
- 3 Replies
- 817 Views
-
Last post by KimDobbins
Sat Sep 17, 2022 5:31 pm
-
-
- 4 Replies
- 1225 Views
-
Last post by John iaccino
Sat Sep 17, 2022 5:09 pm
-
-
FS: E & J "Black & Brass" Tail Light for 1914
Replies: 2
by
Rodger Erickson » Fri Sep 09, 2022 9:06 pm
First post
For Sale: One Black & Brass E & J tail light, I believe this is correct for an early to mid 1914 T. This light has been refurbished, a new reflector has been installed, and the brass parts have been polished. It's a nice lamp but not perfect - There is a rough spot on the back where a repair was made to the steel body - you will need to fill it in...
Last post
Still have it...
- 2 Replies
- 655 Views
-
Last post by Rodger Erickson
Sat Sep 17, 2022 10:59 am
-
-
- 0 Replies
- 659 Views
-
Last post by Model T Tom
Sat Sep 17, 2022 6:53 am
-
-
Battery Box and Lid SOLD and delivered
Replies: 7
by
AandTman » Sat Sep 03, 2022 10:02 am
First post
Battery Box and lid with stand offs. $ 175.00 includes shipping USA.
Battrey Lid.JPG Battery Lid 1.JPG Battery Box.JPG
Last post
Charles, got it I PM you.
Thanks, Don
- 7 Replies
- 1564 Views
-
Last post by AandTman
Fri Sep 16, 2022 11:40 pm
-
-
Front and rear hubs fs. Sold
Replies: 2
by
CTLeonard » Fri Sep 16, 2022 12:38 pm
First post
Not show winners but good hubs. Keyways are good, along with all threads. One of the inner races is iffy, you can see where the bearing sat but can't feel it. 190.00 plus shipping gets all 4. ctleonard64@gmail.com IMG_20220916_112928954.jpg IMG_20220916_112909129.jpg IMG_20220916_112959153.jpg
Last post
Mike, sent you an email.
- 2 Replies
- 786 Views
-
Last post by Southfork Creek
Fri Sep 16, 2022 8:14 pm
-
-
13/14 hoodformer WTB
Replies: 1
by
Nv Bob » Fri Sep 16, 2022 3:09 pm
First post
doesn't need to be pretty but must be solid enought hold the back of an aluminum hood
Just looking see what's out there befor I go plan B or C
Thanks
Bob
Jalopyt@yahoo.com
Last post
I have nice one that I want $125 for it plus shipping. Ted 503 728 3476
- 1 Replies
- 471 Views
-
Last post by T Cruiser
Fri Sep 16, 2022 4:11 pm
-
-
FS - TT Stuff in Hershey
Replies: 1
by
OldFord » Fri Sep 16, 2022 3:21 pm
First post
Bring your trailer: 23 rear wheels with drums, 23 rear rims, rear axle bearings, short running boards w/brackets, pair TT rear fenders. 518-755-0986
Last post
Bring your trailer: 23 rear wheels with drums, 23 rear rims, rear axle bearings, short running boards w/brackets, pair TT rear fenders. Hershey spots C4Y34-37. 518-755-0986
- 1 Replies
- 531 Views
-
Last post by OldFord
Fri Sep 16, 2022 3:22 pm
-
-
Lead Hammer mold FS
Replies: 2
by
Dan Hatch » Sat Sep 10, 2022 2:41 pm
First post
Here is extra to me lead hammers mold. Make your own to work on your T. This is a large mold at least 2 lb hammers. Made by Podlin Tool co. $25.00 + shipping. Email me at address in pictures. Thanks Dan
AD1A5CC9-F076-4BAA-A68F-F0788A88B48F.jpeg
D70086C1-A948-4490-A6CC-8ECDB99CE6DB.jpeg
D5675838-5B1D-4D88-A348-272B092AB77E.jpeg
Last post
I use orange juice cans as molds.
- 2 Replies
- 809 Views
-
Last post by Chris Haynes
Fri Sep 16, 2022 1:14 pm
-
-
Winfield S/SR-AA carb adapters
Replies: 8
by
Kevin Pharis » Mon Jul 04, 2022 11:09 pm
First post
Here are 2 ea. Winfield S/SR-AA to 2.375” bolt spacing 2 bolt flange (Model A) carb adapters. I make these new for the Model A guys, but found that this adapter was perfect for swapping out the U&J on my touring car (see pic below).
1 carb adapter is simple S/SR-AA to 2.375”, and the other has a built in bell crank mount. These are modified from...
Last post
that is a really nice look...almost lost-wax casting-ish
I'm not surprised they're not chromated...that is all but obsolete these days...nasty stuff (but it was very effective).
- 8 Replies
- 1450 Views
-
Last post by Scott_Conger
Fri Sep 16, 2022 9:03 am
-
-
Sold radiator cap
Replies: 3
by
Melba Nolan » Sun Jul 24, 2022 12:15 am
First post
For Sale: Chrome radiator cap. In very good condition. $15 plus postage
20220723_231002.jpg 20220723_231055.jpg
the second picture is showing two marks on the cap.
Last post
sold pending payment
- 3 Replies
- 1041 Views
-
Last post by Melba Nolan
Thu Sep 15, 2022 9:58 pm
-
-
26-27 taillight fs. Sold
Replies: 7
by
CTLeonard » Tue Sep 13, 2022 9:12 am
First post
Complete taillight fs. Can come up with the fender bracket if you need one. 40.00 plus shipping. ctleonard64@gmail.com IMG_20220913_080759098.jpg IMG_20220913_080746046.jpg IMG_20220913_080737516.jpg
Last post
Thank you for the feedback!
- 7 Replies
- 1198 Views
-
Last post by QGolden
Thu Sep 15, 2022 8:31 pm
-
-
New Tiger Timer SOLD
Replies: 4
by
Melba Nolan » Fri Aug 19, 2022 8:38 pm
First post
For Sale: A New Tiger Timer $50 plus postage
20220819_192545.jpg 20220819_192600.jpg 20220819_192610.jpg 20220819_192701.jpg
Last post
Holy cow...looks just like Tony Wiltshire's (RIP) timer! Be good to have a spare.
- 4 Replies
- 1008 Views
-
Last post by TWrenn
Thu Sep 15, 2022 4:43 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum