Classifieds - Parts - Page 37

Classifieds - Parts

New Topic

19803 topics

Page 37 of 199
- Jump to page:
Previous
1
…
35
36
37
38
39
…
199
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

44965 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

WTB: Kelsey 88 Lugs

Last post by Allan « Sun Apr 02, 2023 8:11 am
Replies: 6
by Stephen_heatherly » Fri Mar 31, 2023 11:15 am

First post

I'm looking for some lugs for Kelsey 88 demountable rims. These rims use lugs that are separate from the rim. I have a few already but, need more to get a full set of 16.

Thanks,
Stephen

Last post

The Lang's reproductions filled a need and they are to be commended for making them available. However, they were totally machined and each was a perfect copy of the next. Originals appear to be made by shearing short lengths from a bar of formed steel. Hence each differed from the next. The shearing cuts varied. The crush of the shearing made...

6 Replies

715 Views

Last post by Allan
Sun Apr 02, 2023 8:11 am
26-7 gas flap springs

Last post by Les Schubert « Sat Apr 01, 2023 7:12 pm

by Les Schubert » Sat Apr 01, 2023 7:12 pm

A few years ago I did a run of these. I realized that I still have 10 of them. Available for $25.00. Including two rivets and postage

0 Replies

368 Views

Last post by Les Schubert
Sat Apr 01, 2023 7:12 pm
FS brass headlight burners, new day timers, 1911 hubcap, NOS coil box

Last post by KimDobbins « Sat Apr 01, 2023 5:13 pm
Replies: 5
by KimDobbins » Sat Apr 01, 2023 1:29 pm

First post

Pairs of brass headlight burners, $75.00 per pair. Nice new day timers, $40.00 each. One 1911 brass hubcap, $50.00. NOS Ford script coil box,$ 125.00. kdmks At att.net. All plus shipping.

Last post

3 pair of burners are sold.

5 Replies

699 Views

Last post by KimDobbins
Sat Apr 01, 2023 5:13 pm
09-10 Kingston 5-Ball Carburetor

Last post by MNToys « Sat Apr 01, 2023 2:13 pm
Replies: 1
by MNToys » Fri Mar 31, 2023 9:14 pm

First post

Nice original 5-Ball. ‘09-‘10 style. Complete and not seized. I have not removed the bowl. I assume it needs rebuilt. A DEAL at $850 including shipping to lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

1DC9B5D5-16EE-427C-9BFE-B3C85B5000EB.jpeg

A448F11C-17F6-4E7D-A743-4886178E2E36.jpeg

Last post

Sold! Thanks!

1 Replies

438 Views

Last post by MNToys
Sat Apr 01, 2023 2:13 pm
FS: Rare Fatman Steering Column

Last post by WaltM « Sat Apr 01, 2023 12:07 pm
Replies: 2
by WaltM » Sat Apr 01, 2023 10:06 am

First post

For Sale RARE Fatman steering Column. Drive in comfort with this shortened steering column, plenty of room. Column measures 9 inches in length 1915-1925. price $150. plus shipping. Thanks :D

Last post

Couldn t resist!

2 Replies

684 Views

Last post by WaltM
Sat Apr 01, 2023 12:07 pm
FS ENGINES AND RUCKSTELLS

Last post by Mark Chaffin « Sat Apr 01, 2023 11:19 am
Replies: 1
by Mark Chaffin » Mon Mar 27, 2023 9:12 pm

First post

Time to get some of the shop floor space cleared up. I have many complete engines (1917-1927) and several Ton Truck Ruckstell rear Axles with outside brakes that need to find new homes. Come take a look $200 each. Cash and carry. Located at the garage in Lake Elsinore, CA. No shipping. Mark Chaffin (951) 805-0928

Last post

Still available. Come take a look.

1 Replies

846 Views

Last post by Mark Chaffin
Sat Apr 01, 2023 11:19 am
FS EARLY LOW HEAD

Last post by Mark Chaffin « Sat Apr 01, 2023 11:12 am
Replies: 2
by Mark Chaffin » Fri Mar 31, 2023 2:57 pm

First post

Very nice early low head $200.00 plus domestic shipping. Mark Chaffin (951) 805-0928

Head 1.jpg

Head 2.jpg

Head 3.jpg

Last post

Sold to Wayne. Email sent. Thank you. 😀

2 Replies

556 Views

Last post by Mark Chaffin
Sat Apr 01, 2023 11:12 am
Speedometer Stewart 26

Last post by MNToys « Sat Apr 01, 2023 9:01 am
Replies: 2
by MNToys » Fri Mar 31, 2023 9:32 pm

First post

Stewart 26 in great shape. I have not had it on a car but I would think it works fine. Pictures show condition. Asking $200 including shipping.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593 95D2860E-23E4-4F0D-9ED6-E780C272B06C.jpeg

75AC1368-9AE1-4D57-858A-709BAE306A51.jpeg

CC01FE68-56C7-4947-9460-07A112CD6463.jpeg...

Last post

Sold thanks! Email sent

2 Replies

539 Views

Last post by MNToys
Sat Apr 01, 2023 9:01 am
FS BRASS STEERING COLUMN SUPPORT

Last post by Mark Chaffin « Fri Mar 31, 2023 8:03 pm
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 7:16 pm

First post

Heavy duty (solid) brass steering column support $75.00 plus $9.10 domestic USPO Flat Rate shipping. Mark Chaffin (951) 805-0928

Support.jpg

Last post

Sold to Larry. Thank Larry! 😀

1 Replies

447 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 8:03 pm
wire wheels

Last post by sam mendenhall « Fri Mar 31, 2023 7:04 pm
Replies: 5
by Melba Nolan » Tue Nov 08, 2022 6:04 pm

First post

For sale: set of 4 wire wheels $800 prefer picked up

20221108_124000.jpg 20221108_124024.jpg

Last post

Melba do you still have the wire wheels

5 Replies

1939 Views

Last post by sam mendenhall
Fri Mar 31, 2023 7:04 pm
FS FIGURE EIGHT SHACKLE SET

Last post by Mark Chaffin « Fri Mar 31, 2023 5:44 pm
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 2:56 pm

First post

Very nice early figure eight shackle set $150.00 plus $9.10 domestic shipping. Mark Chaffin (951) 805-0928

Shackles 1.jpg

Shackles 2.jpg

Last post

Sold to Bill

1 Replies

496 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 5:44 pm
FS GO LIGHT TRAFFIC SIGNAL

Last post by Perry Goble « Fri Mar 31, 2023 5:18 pm
Replies: 1
by Perry Goble » Fri Mar 31, 2023 5:09 pm

First post

FS original box
GO LIGHT Traffic Signal
$250
Text for pictures
5122340243

Last post

Text for pictures
5122340243

1 Replies

528 Views

Last post by Perry Goble
Fri Mar 31, 2023 5:18 pm
FS MISCELLANEOUS ITEMS

Last post by Mark Chaffin « Fri Mar 31, 2023 3:54 pm
Replies: 3
by Mark Chaffin » Thu Mar 30, 2023 5:00 pm

First post

Several miscellaneous items available as described below. Shipping will be an additional charge. PM me or call Mark Chaffin (951) 805-0928

Manifold 1.jpg

Manifold 2.jpg
Economy Manifold accessory. Only one I have ever seen. Excellent condition was $125 now $100 plus $19.10 domestic USPO Flat Rate.

Bronze 1.jpg

Bronze 2.jpg
Heavy duty...

Last post

Sediment bulb sold to Shannon. Thank you Shannon. :)

3 Replies

783 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:54 pm
FS AERMORE EXHAUST WHISTLE

Last post by Mark Chaffin « Fri Mar 31, 2023 3:45 pm
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 3:03 pm

First post

Aermore exhaust whistle $80.00 plus shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

Last post

Sold to Scott. Thanks Scott! :)

1 Replies

1176 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:45 pm
FS HYDRAULIC BOOSTER FOR DISC BRAKES

Last post by Mark Chaffin « Fri Mar 31, 2023 3:05 pm

by Mark Chaffin » Fri Mar 31, 2023 3:05 pm

Nice hydraulic booster setup for juice brakes $100.00 plus domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

0 Replies

369 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:05 pm
clutch spring

Last post by Melba Nolan « Fri Mar 31, 2023 10:04 am

by Melba Nolan » Fri Mar 31, 2023 10:04 am

for sale: clutch spring $10 plus shipping

email melbanolan@aol.com or text 314-575-7115 for picture

0 Replies

308 Views

Last post by Melba Nolan
Fri Mar 31, 2023 10:04 am
WTB: peddlers box for the back of a t roadster

Last post by frontyboy « Thu Mar 30, 2023 11:35 pm
Replies: 11
by frontyboy » Tue Mar 21, 2023 11:16 pm

First post

looking for a peddlers box for a roadster. Condition not important as long as it has the hardware.

frontyboy 2ho6 9191949 text or call.

Last post

Still looking

frontyboy

11 Replies

1543 Views

Last post by frontyboy
Thu Mar 30, 2023 11:35 pm
Complete Ruckstell with extra parts FS (Sold)

Last post by reifjr « Thu Mar 30, 2023 9:21 pm

by reifjr » Thu Mar 30, 2023 9:21 pm

Selling a complete Ruckstell differential, with the shifter assembly. I also have an assortment of parts that can be used to build up a second Ruckstell.

The complete assembly, in the attached photo, was under my 26 Roadster and is in excellent condition. Thrust washers, gaskets and new bearings should be all that's needed.

Most if the parts...

0 Replies

536 Views

Last post by reifjr
Thu Mar 30, 2023 9:21 pm
FS PINION GEARS

Last post by Mark Chaffin « Thu Mar 30, 2023 9:17 pm
Replies: 2
by Mark Chaffin » Thu Mar 30, 2023 5:21 pm

First post

An assortment of very nice rear axle pinion gears. Prices and description as indicated below. Domestic shipping will be an additional charge of $9.10 USPO Priority Flat Rate. PM me or call Mark Chaffin (951) 805-0928

Pinion 1.jpg
10 Tooth Pinion. $100 plus shipping.

Pinion 2.jpg
11 Tooth Pinion. $75.00 plus shipping

Pinion 3.jpg
11 Tooth...

Last post

Sold to Terry.

2 Replies

501 Views

Last post by Mark Chaffin
Thu Mar 30, 2023 9:17 pm
Switch panel FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:05 pm
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 11:36 am

First post

Early switch panel. Has lock tumbler in, key 55. But does not turn. No switch parts. Has an amp meter, don’t know condition. Needle does move. $20.00 + shipping. Email me at address in pictures. Thanks Dan.
00147A12-0BB5-4D8B-B28A-BD6007ED9848.jpeg
C69B8233-77B5-433A-A18F-1943ED243095.jpeg
2F6D2D44-50B1-49FD-97A9-D3E3FAD901C1.jpeg

Last post

Back to the top

3 Replies

697 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:05 pm
W T B--1913 roadster body or project car

Last post by Burlingtontguy « Thu Mar 30, 2023 7:32 pm
Replies: 17
by Burlingtontguy » Sun Jan 08, 2023 8:51 pm

First post

I am looking for a 1913 0r 1914 body to build a Runabout Give me a call or send e-mail with pictures and price with contact number
Dennis 401-932-3191

Last post

to the top

17 Replies

2649 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:32 pm
1909-1912 Head - SOLD

Last post by slang250 « Thu Mar 30, 2023 5:20 pm
Replies: 1
by Ashley » Thu Mar 30, 2023 2:22 pm

First post

1909-1912 Head, no cracks, has been glass beaded. 5 of the head bolt holes have been made oversize. $500 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230330_141054.jpg
20230330_141050.jpg
20230330_141040.jpg
20230330_141035.jpg

Last post

The head has been spoken for pending payment. Thank You Steve

1 Replies

467 Views

Last post by slang250
Thu Mar 30, 2023 5:20 pm
Sold ! Stewart Speedometer & Swivel

Last post by KWTownsend « Thu Mar 30, 2023 2:24 pm
Replies: 4
by KWTownsend » Tue Mar 28, 2023 2:32 pm

First post

Stewart Model C, correct for 1913 in very nice condition. Untested, but drum turns when input is turned. $150.

Rebuilt swivel, 2-1/2:1 Rebuilt, very nice. $275

Price is firm, selling for widow.

Free delivery to the Portland Swap Meet this coming weekend.
20230328_111022.jpg

Last post

Both are sold!
Thanks MTFCA

4 Replies

741 Views

Last post by KWTownsend
Thu Mar 30, 2023 2:24 pm
WTB metal firewall bracket for stewart 160 speedometer

Last post by Reno Speedster « Thu Mar 30, 2023 1:59 pm

by Reno Speedster » Thu Mar 30, 2023 1:59 pm

I am assembling parts to install a Stewart 160 speedometer on my 22. I am looking for the bracket for mounting the speedo head to the metal dash (see picture). Please get in contact if you have one you would sell. Thanks

0 Replies

267 Views

Last post by Reno Speedster
Thu Mar 30, 2023 1:59 pm
FS—> 1912 Wisconsin Tag.

Last post by Runabout « Thu Mar 30, 2023 11:49 am
Replies: 5
by Runabout » Tue Mar 28, 2023 7:46 pm

First post

Nice 1912 Wisconsin license plate, $150 plus shipping.
4 Ball Kingston Carburetor. Ran extremely well and idled like a dream on my 1915 T then it took a dump and started leaking fuel, I’m sure a needle valve and seat is needed, $250. plus shipping. I’ve got the correct carburetor for my T now so this one is available....

Last post

Tag is spoken for, pending payment….Thanks Tim. I didn’t get your PM please resend or call.

5 Replies

699 Views

Last post by Runabout
Thu Mar 30, 2023 11:49 am
Stromberg Hot Spot Manifold SOLD

Last post by Scott_Conger « Wed Mar 29, 2023 8:16 pm
Replies: 8
by rickd » Wed Mar 29, 2023 12:46 pm

First post

Stromberg Hot Spot Manifolds with the correct and original hot spot control valve. Both manifolds and control valve are in good shape. Includes a copy of Stan Howes' OF and Hot Spot instruction manual. $350.00+$40.00 UPS shipping. Check or money order. Email me through this site if interested or have any questions. H1.jpg H2.jpg H3.jpg H4.jpg

Last post

Ken

Granted, it looks similar, but no it is not the same thing but is darn near if not exactly the same stuff that older gas can nozzles were made from. A flat wound, interlocking flat ribbon of plated steel. I actually have some older steel gerry cans that I store fuel in here at the cabin and they have this exact flexible spout but too large in...

8 Replies

853 Views

Last post by Scott_Conger
Wed Mar 29, 2023 8:16 pm
Tea cup pan

Last post by KimDobbins « Wed Mar 29, 2023 7:20 pm
Replies: 2
by Dollisdad » Wed Mar 29, 2023 1:48 pm

First post

Looking for 11-13 tea cup pan. Either one will do.

Thanks Tom

Last post

Tom, I have a 1913 tea cup 3 rivet pan. I’ll bring it to Tulare.

2 Replies

596 Views

Last post by KimDobbins
Wed Mar 29, 2023 7:20 pm
Low Head SOLD

Last post by rickd « Wed Mar 29, 2023 4:30 pm

by rickd » Wed Mar 29, 2023 4:30 pm

Excellent condition low head. Spark plug threads are all good. $225.00+$50.00 UPS shipping. Check or money order. Email me through this site. L1.jpg L2.jpg L3.jpg L4.jpg

0 Replies

397 Views

Last post by rickd
Wed Mar 29, 2023 4:30 pm
On marketplace

Last post by 1913Runabout « Wed Mar 29, 2023 4:29 pm
Replies: 1
by Dollisdad » Wed Mar 29, 2023 2:07 pm

First post

$300. Castle rock, Washington CA1B8C8C-F400-4001-BB73-70F6045CA76E.jpeg AD3ACC50-D677-48C8-98FE-8F9DED06C696.jpeg

Last post

Message sent

1 Replies

609 Views

Last post by 1913Runabout
Wed Mar 29, 2023 4:29 pm
Dise brakes are sold

Last post by Perry Goble « Wed Mar 29, 2023 12:07 pm

by Perry Goble » Wed Mar 29, 2023 12:07 pm

The dise brakes are sold thank you mtfca

0 Replies

370 Views

Last post by Perry Goble
Wed Mar 29, 2023 12:07 pm
WTB: 1926 rear spring clamp, longer than the normal one

Last post by Adam « Wed Mar 29, 2023 11:24 am
Replies: 7
by bmklawt » Thu Mar 23, 2023 11:18 pm

First post

Learned something new today, evidently there is a longer than the normal rear spring clamp (U bolt) and I need to find a pair of the long ones for my 1927 Touring. Let me know if you have 1 or 2 your willing to part with
Picture from an old post

Last post

That is interesting… The illustration of 3833 & 3833b is from a ‘29 parts book, so should be the latest (most recent) variation of that part. I was going to try mine in a late crossmember, but didn’t because it is an exact match to the illustration.

So apparently, the one you have that is long enough for a 9 leaf spring but that will not fit a...

7 Replies

865 Views

Last post by Adam
Wed Mar 29, 2023 11:24 am
Round gas tank

Last post by KWTownsend « Wed Mar 29, 2023 9:12 am
Replies: 1
by KWTownsend » Tue Mar 28, 2023 2:16 pm

First post

Nice round gas tank 1913-1920 $225
Free delivery to Portland Swap Meet this weekend.

20230328_110918.jpg

Last post

Is this priced too high?

1 Replies

468 Views

Last post by KWTownsend
Wed Mar 29, 2023 9:12 am
For Sale: Watts Clutch

Last post by Stephen_heatherly « Wed Mar 29, 2023 9:07 am
Replies: 2
by Stephen_heatherly » Wed Mar 29, 2023 8:12 am

First post

Here I have a watts clutch set up for sale. This includes the four thick plates and the one thin one as well as the special high pressure spring required for this type of clutch. These have not been available for a number of years. I removed the clutch from a rebuilt transmission that had never been used. It's in New condition with some...

Last post

Sold to Ken!

2 Replies

440 Views

Last post by Stephen_heatherly
Wed Mar 29, 2023 9:07 am
Left front fender Wanted

Last post by wyankee « Wed Mar 29, 2023 5:02 am
Replies: 3
by wyankee » Tue Mar 28, 2023 8:27 pm

First post

I am looking for an nos or unrestored left front fender for a 1923 low cowl touring. I am finishing an unrestored car and want everything to match.Thanks

Last post

I have not received a message from you yet. I will send a picture of the right side fender that I have to match. Thanks for the help.

3 Replies

432 Views

Last post by wyankee
Wed Mar 29, 2023 5:02 am
Aluminum hogshead

Last post by KWTownsend « Tue Mar 28, 2023 9:51 pm
Replies: 2
by KWTownsend » Tue Mar 28, 2023 2:22 pm

First post

This aluminum hogshead with lettered pedals will need some repair where the last hole closest to the block is broken.
$75 Free delivery to Portland Swap Meet this coming weekend.
20230328_110846.jpg

Last post

Holding for Tom...

2 Replies

559 Views

Last post by KWTownsend
Tue Mar 28, 2023 9:51 pm
FS 1910 brass Holley carburetor

Last post by KimDobbins « Tue Mar 28, 2023 9:41 pm
Replies: 2
by KimDobbins » Tue Mar 28, 2023 6:08 pm

First post

This is a reproduction carb made be the late Ernie Brown of Antlers, OK. Ernie was a top notch pattern maker and machinist. He did first class work as you can see. Ernie reproduced the 1909-11 Kingston 5 ball, 1910, 1911 and 1912 Holley carbs. There are many of Ernie’s carbs on running cars today and many of the owners have no idea that he made...

Last post

Carb is sold.

2 Replies

520 Views

Last post by KimDobbins
Tue Mar 28, 2023 9:41 pm
WTB 13-14 carbide generator

Last post by BrassTee1914 « Tue Mar 28, 2023 4:44 pm
Replies: 1
by A400 » Sat Mar 25, 2023 6:30 pm

First post

Hoping to find a carbide generator appropriate for a mostly original car with a 50 year old paint job. Must be excellent and complete.

Last post

I have a generator looks NOS .Complete.

1 Replies

478 Views

Last post by BrassTee1914
Tue Mar 28, 2023 4:44 pm
FS 1911-12 7 rivet oil pan

Last post by KimDobbins « Tue Mar 28, 2023 4:44 pm
Replies: 5
by KimDobbins » Fri Mar 24, 2023 2:34 pm

First post

For sale is a pretty nice 7 rivet oil pan. It has the correct removable bottom and 1 piece retainer. Good solid pan. $1500.00 plus shipping. kdmks AT att.net.

Last post

Pan is sold

5 Replies

856 Views

Last post by KimDobbins
Tue Mar 28, 2023 4:44 pm
NOS Kingston coil points

Last post by KWTownsend « Tue Mar 28, 2023 2:25 pm

by KWTownsend » Tue Mar 28, 2023 2:25 pm

Limited quantity of NOS Kingston coil points.
$7.50 per set.
Free Delivery to the Portland Swap Meet this coming weekend.

0 Replies

354 Views

Last post by KWTownsend
Tue Mar 28, 2023 2:25 pm
FS 1913 pair of Wisconsin license plates

Last post by KimDobbins « Tue Mar 28, 2023 1:05 pm
Replies: 1
by KimDobbins » Fri Mar 24, 2023 6:31 pm

First post

Nice pair of 1913 Wisconsin license plates. $300.00 plus shipping. Kdmks AT att.net.

Last post

back to top

1 Replies

441 Views

Last post by KimDobbins
Tue Mar 28, 2023 1:05 pm
FOR SALE - 1924 CALIFORNIA LICENSE PLATE MATCHED PAIR

Last post by Model_T_Family « Tue Mar 28, 2023 12:38 pm
Replies: 1
by Jay In Northern Ca. » Sat Mar 25, 2023 9:17 am

First post

These plates are in excellent near new shape, in primmer, and just need to be painted the proper colors for the year. I checked them out with California Department of Motor Vehicles a while back and they were clear in the system to register on your 1924 California year of make vehicle. Asking $95 plus postage.
1924 plates 1.jpg 1924 plates 2.jpg...

Last post

Emailing you.

1 Replies

447 Views

Last post by Model_T_Family
Tue Mar 28, 2023 12:38 pm
Accessory Hayes Wire Wheels 30x 3.5 For Sale

Last post by Alex Dragone « Tue Mar 28, 2023 10:16 am
Replies: 3
by Alex Dragone » Tue Mar 21, 2023 10:26 am

First post

Offered here is a pair of front accessory Hayes wire wheels. They are the 30 x 3.5 size. The outside rims are in great condition. One is missing the front spokes. These accept regular 30 x 3.5 inch demountable rims and fit directly to model T spindles using regular bearings.

Asking $400 plus shipping for the pair. Thanks!

Last post

These are sold pending payment. I have not checked the forum in a few days. Ted if the sale falls through I will give you a call, but other buyer contacted me first. Thanks

3 Replies

995 Views

Last post by Alex Dragone
Tue Mar 28, 2023 10:16 am
Original Hempy Cooper Line Boring jig for sale

Last post by Alex Dragone « Tue Mar 28, 2023 10:13 am
Replies: 3
by Alex Dragone » Tue Mar 21, 2023 10:30 am

First post

This is a really nice original and complete Hempy Cooper line boring jig from the early 1920s for Model T blocks. It is complete with original shaft, gears and cutters. Great unit. Asking $500 plus shipping.

Last post

Sorry I sold it to a local friend before I saw your message. Thanks for your interest and if you are looking for anything else just let me know. Thanks so much and sorry about that. - Alex

3 Replies

840 Views

Last post by Alex Dragone
Tue Mar 28, 2023 10:13 am
WTB antique jack

Last post by FATMAN « Tue Mar 28, 2023 9:25 am
Replies: 3
by MdDWS » Mon Mar 27, 2023 3:46 pm

First post

WTB a jack like the black one in the pic.4199376284

Last post

modelt2001@comcast.net
or call 815-633-7244
Bob

3 Replies

591 Views

Last post by FATMAN
Tue Mar 28, 2023 9:25 am
FS COMPLETE CHASSIS

Last post by Mark Chaffin « Mon Mar 27, 2023 9:16 pm

by Mark Chaffin » Mon Mar 27, 2023 9:16 pm

I have several complete Model T chassis' available for purchase. All late model years. $500 to $1500. Come take a look. Cash and carry. Located at the garage in Lake Elsinore, CA. Mark Chaffin (951) 805-0928

0 Replies

562 Views

Last post by Mark Chaffin
Mon Mar 27, 2023 9:16 pm
SOLD: "My Auto Book: Indispensable to the Motorist" C.1908. A fabulous early motoring book.

Last post by Linus Tremaine « Mon Mar 27, 2023 7:37 pm
Replies: 3
by GGZ » Sun Jul 10, 2022 2:51 pm

First post

This is a really great, original book. My Auto Book: Indispensable to the Motorist is a first edition with a 1908 copyright date and written by The Outing Publishing Company. This hardcover book measures about 7 1/2 by 5 and has about 200 pages. It is a log book where motorist would write the date of each trip, the names of those who attended,...

Last post

I could be wrong but I think the book is blank.

I have many early auto books but only a few with trip details filled in and I don’t wish to sell them.

Sorry I can’t help you.

3 Replies

2774 Views

Last post by Linus Tremaine
Mon Mar 27, 2023 7:37 pm
WTB 18-22 top irons roadster two man type

Last post by Model T Mark « Mon Mar 27, 2023 7:32 pm
Replies: 1
by Model T Mark » Sun Mar 26, 2023 7:38 pm

First post

Looking to buy top irons square type for my son’s new to him 22 roadster. Trying to find a set to match a patina car. They are the two man variety. New would be acceptable if you purchased a set and have changed direction. Mark Eyre, Email meyre14t@yahoo.com.

Last post

Found! Less than 24 hours thank you Russ!

1 Replies

360 Views

Last post by Model T Mark
Mon Mar 27, 2023 7:32 pm
Timing Gear Set FS

Last post by Dan Hatch « Mon Mar 27, 2023 1:39 pm
Replies: 2
by Dan Hatch » Sun Mar 26, 2023 11:22 am

First post

Here are a set of new crank and cam gears for sale. Extra to me. Cam gear is Al. Crank gear is steel. $75 for set + shipping. Email me at address in pictures. Thanks Dan
0E83CAC6-7465-470F-AD1A-B06E1985E5A1.jpeg
8713CF87-D705-4212-B9EF-05395750205E.jpeg
E5CCD905-2C89-4925-BB78-48BE167BC3E2.jpeg

Last post

Sold pending payment.

2 Replies

495 Views

Last post by Dan Hatch
Mon Mar 27, 2023 1:39 pm
SOLD - Vintage Ford Magazine Binders

Last post by Erik Johnson « Mon Mar 27, 2023 1:28 pm
Replies: 2
by Erik Johnson » Sun Mar 26, 2023 7:50 pm

First post

Binders have been sold.

15 binders for the Vintage Ford magazine published by the Model T Ford Club of America

Each binder holds six issues (one year) of Vintage Ford

$30

Local pick up in south Minneapolis or I can deliver them to Bob Peterson's April 22 swap meet in Kenyon, MN

Last post

I sent you a private message.

2 Replies

528 Views

Last post by Erik Johnson
Mon Mar 27, 2023 1:28 pm
Early 26 Water Outlet and Fan Mount FS

Last post by RGould1910 « Sun Mar 26, 2023 11:41 pm
Replies: 1
by Dan Hatch » Sun Mar 26, 2023 2:25 pm

First post

Here is a nice unbroken early 26 fan mount. If you have a car that needs one of these you know how hard nice UNBROKEN ones are to find. $65.00 + shipping. Email me at address in pictures. Thanks Dan.
4534628B-870A-4833-8420-ED9C9E7A110C.jpeg
7BBBDA18-4338-43C0-99E4-79A19589C975.jpeg
8828DA20-9B7B-493B-B87D-9326FEEAF617.jpeg...

Last post

Email sent

1 Replies

407 Views

Last post by RGould1910
Sun Mar 26, 2023 11:41 pm
WTB: New Cam Shaft

Last post by ModelTWoods « Sun Mar 26, 2023 11:21 pm
Replies: 6
by steven.newman1910 » Sat Mar 25, 2023 5:53 pm

First post

Looking for a new cam shaft. Preferably a stipe .250, but would consider a .280 if one is available. I called Chaffins to see if they had any of their new cams i stock but said they don't do those anymore and no regrinds on the shelf either.

Does anybody have something they would sell?

Last post

I'll be in Luray in May

Hi Rich,

Looks like this is a regrind from Chaffins. Am I correct?
Or is this one brand new?

Thanks!

Steven

Its definitely a regrind. Tag says .264 lift which Chaffins apparently sold as .270 lift.

6 Replies

910 Views

Last post by ModelTWoods
Sun Mar 26, 2023 11:21 pm
taillight Sold

Last post by South park zephyr « Sun Mar 26, 2023 7:25 pm
Replies: 4
by Melba Nolan » Thu Oct 20, 2022 6:21 pm

First post

For sale: tail light and license plate combo $25 plus postage
20220628_151123.jpg

Last post

I would like to purchase
I'm in Ofallon, MO I can pick up it that is ok

4 Replies

1186 Views

Last post by South park zephyr
Sun Mar 26, 2023 7:25 pm
Early Timing gear set FS

Last post by Dan Hatch « Sun Mar 26, 2023 4:56 pm
Replies: 2
by Dan Hatch » Sun Mar 26, 2023 2:34 pm

First post

Here is an original straight cut timing gear set. They were together so looks like a set. $15.00 + shipping. Email me at address in pictures. Thanks Dan
68D5F767-66F5-48B0-A94C-8B6FE4A16B80.jpeg
F203AB83-8DD8-48B2-AACC-96FFE0192BBA.jpeg
9FF5E5F8-6B99-4EAB-887B-4E7485F6DF53.jpeg

Last post

Spoken for.

2 Replies

395 Views

Last post by Dan Hatch
Sun Mar 26, 2023 4:56 pm
Zenith HP5A Carburetor For Sale

Last post by walber « Sun Mar 26, 2023 3:57 pm
Replies: 2
by walber » Sun Mar 26, 2023 3:13 pm

First post

A couple years ago I bought a complete HP5A as shown in photos. Upon taking it apart I found damage at the bottom of the float bowl where the casting was broken. A repair was attempted with a poor job of brazing the parts by a prior owner. Needless to say, I was disappointed.

This should be repairable by someone more skilled than myself. I’m...

Last post

Sold to Scott

2 Replies

441 Views

Last post by walber
Sun Mar 26, 2023 3:57 pm
Vintage Ford Magazines

Last post by Erik Johnson « Sun Mar 26, 2023 12:59 pm

by Erik Johnson » Sun Mar 26, 2023 12:59 pm

144 issues of Vintage Ford published by the Model T Ford Club of America

$75 for the entire collection

Local pick up in south Minneapolis or I can deliver them to Bob Peterson's April 22 swap meet in Kenyon, MN.

Years, volumes and issue numbers listed below:

1969 - Volume 4: 3, 4, 5
1970 - Volume 5: 1, 3, 4, 5, 6
1971 - Volume 6: 1, 3, 4, 5,...

0 Replies

338 Views

Last post by Erik Johnson
Sun Mar 26, 2023 12:59 pm
FORD AGENCY PARTS BINS

Last post by Mark Chaffin « Sun Mar 26, 2023 10:56 am
Replies: 5
by Chaffins » Fri Mar 24, 2023 1:38 pm

First post

HAVE 3 ORIGINAL FORD AGENCY PARTS BINS, 2 WITH DRAWERS $1,000 EA

GLEN CHAFFIN 951-735-4791 CHAFFIN0394@GMAIL.COM

Last post

Screenshot_20230326_075514_Chrome.jpg

5 Replies

1070 Views

Last post by Mark Chaffin
Sun Mar 26, 2023 10:56 am
carburetors for sale

Last post by Melba Nolan « Sun Mar 26, 2023 10:10 am
Replies: 5
by Melba Nolan » Sat Aug 06, 2022 12:04 pm

First post

For sale: 1916 Kingston Brass carburetor for sale. Model L $350 plus postage 20220806_105131.jpg 20220806_105259.jpg

Last post

move to top

5 Replies

2115 Views

Last post by Melba Nolan
Sun Mar 26, 2023 10:10 am
FOR SALE - MODEL T ERA RIBBON BUMPER CLAMP ON RUNNING LIGHT BRACKET LOT

Last post by JvanMaanen « Sun Mar 26, 2023 10:10 am
Replies: 1
by Jay In Northern Ca. » Sat Mar 25, 2023 5:30 pm

First post

Various make running light bumper clamp setups and a bumper mount strapping clamp, plus some additional parts. Asking $55 plus postage.
Running light ribbon bumper clamp on mounts.jpg

Please use this email address below and NOT the personal messaging system to contact me.

email.jpg

Last post

Jay, I'll take them

I'll shoot you an email Jim

1 Replies

485 Views

Last post by JvanMaanen
Sun Mar 26, 2023 10:10 am
straps for gas tank

Last post by Melba Nolan « Sun Mar 26, 2023 10:08 am
Replies: 5
by Melba Nolan » Sat Oct 15, 2022 12:02 am

First post

For sale: straps for gas tank 09/11 $50 plus postage
20220726_183609.jpg 20220726_183724.jpg 20220726_183551.jpg

Last post

move to top

5 Replies

1247 Views

Last post by Melba Nolan
Sun Mar 26, 2023 10:08 am
sediment bowl (sweet potatoe) ad removed

Last post by Melba Nolan « Sun Mar 26, 2023 10:03 am
Replies: 3
by Melba Nolan » Mon Oct 31, 2022 3:05 pm

First post

For sale: Ford Script on both sediment bowl with petcock in good condition $50 plus postage
20221030_101156.jpg 20221030_101135.jpg

Last post

move to top

3 Replies

978 Views

Last post by Melba Nolan
Sun Mar 26, 2023 10:03 am
FOR SALE - SET OF THREE ORIGINAL ACCESSORY FORD MODEL T DOOR LEVER EXTENSIONS NEW OLD STOCK

Last post by Jay In Northern Ca. « Sat Mar 25, 2023 7:58 pm

by Jay In Northern Ca. » Sat Mar 25, 2023 7:58 pm

These are great looking period nickel plated cast brass door lever extensions for all three Model T touring car doors. The knobs on these raise above the tops of the doors for easy access. Asking $65 for the set plus postage. THESE HAVE BEEN SPOKEN FOR, THANKS!
Door Lever Extensions.jpg

Please use this email address below and NOT the personal...

0 Replies

474 Views

Last post by Jay In Northern Ca.
Sat Mar 25, 2023 7:58 pm
Doors!

Last post by Tparts « Sat Mar 25, 2023 4:24 pm
Replies: 2
by Ashley » Thu Mar 09, 2023 1:55 pm

First post

We have a good size selection of doors at the moment. They are 1926-1927 coupe/tudor or 1928-1929 Closed cab pickup doors. The price ranges from $200-$650 depending on condition. Just call Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230309_130456.jpg
20230309_130504.jpg
20230309_130510.jpg

Last post

To the top

2 Replies

812 Views

Last post by Tparts
Sat Mar 25, 2023 4:24 pm
1909-1910 5 Ball Kingston Carburetor - Sold

Last post by Tparts « Sat Mar 25, 2023 4:24 pm
Replies: 1
by Ashley » Mon Mar 13, 2023 1:58 pm

First post

1909-1910 5 Ball Kingston Carburetor, $1250 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230313_133031.jpg
20230313_133015.jpg
20230313_132956.jpg
20230313_132943.jpg

This has been sold. Thank you

Last post

To the top

1 Replies

643 Views

Last post by Tparts
Sat Mar 25, 2023 4:24 pm
1911-1912 12-Rivet Rear End

Last post by Tparts « Sat Mar 25, 2023 4:22 pm
Replies: 3
by Ashley » Thu Mar 02, 2023 12:08 pm

First post

1911-1912 12-rivet rear end. Pulled from a running car to put a Ruckstell on. Includes 2-piece drive shaft and early cast radius rods. $4500. Pick up only or free delivery to Chickasha show with pick up March 16th or 17th. Contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230302_102838.jpg
20230302_102833.jpg...

Last post

To the top

3 Replies

1018 Views

Last post by Tparts
Sat Mar 25, 2023 4:22 pm
NRS steering column

Last post by Rich Eagle « Sat Mar 25, 2023 4:09 pm
Replies: 4
by RGould1910 » Sat Mar 25, 2023 10:57 am

First post

$400. Can deliver to Tulare.
20200902_142135.jpg 20200902_142043.jpg 20200902_142054.jpg 20200902_142221.jpg 20200902_142228.jpg

Last post

These are the things dreams are made of. Don't get me started.
It was fun to see.
I'm glad you found a home for it.

4 Replies

644 Views

Last post by Rich Eagle
Sat Mar 25, 2023 4:09 pm
FS Main Bearing and Rod Bearing Molds

Last post by lnoller « Sat Mar 25, 2023 3:21 pm

by lnoller » Sat Mar 25, 2023 3:21 pm

Noller Conversions is officially retiring after 23 years, and am liquidating all the remaining stock. All items are new. I have four Mainbearing molds and three Rod Bearing molds. I will take $75.00 each for them plus $9.00 for the freight. These are the same and the ones i used to sell by Langs. I have about 25 brake backing plates for $30.00. I...

0 Replies

332 Views

Last post by lnoller
Sat Mar 25, 2023 3:21 pm
Craigslist CO parts FS

Last post by Layden Butler « Sat Mar 25, 2023 1:19 pm
Replies: 1
by brassford » Sat Mar 25, 2023 12:59 pm

First post

Craigslist Pueblo CO I have no connection just passing this along.

Last post

Hood for 1911 Buick 2 cylinder! Rare item.

1 Replies

476 Views

Last post by Layden Butler
Sat Mar 25, 2023 1:19 pm
FS REAR FENDER BRACKETS

Last post by Mark Wing - NM « Sat Mar 25, 2023 10:49 am
Replies: 1
by Mark Chaffin » Fri Mar 24, 2023 5:53 pm

First post

One set of early butterfly rear fender brackets. Very nice reproduction set. Currently unavailable from the dealers. Only have the one set. Price for the pair is $450 plus domestic shipping. Mark Chaffin (951) 805-0928 SOLD

Brackets 1.jpg

Brackets 2.jpg

Brackets 3.jpg

Last post

Hello Mark,

I'd like to buy your rear fender brackets if they're still available. I'll contact you regarding shipping and payment.

Thanks,
Mark Wing
Tin Lizzies of Albuquerque
msjbwing@msn.com
505-331-8741

1 Replies

419 Views

Last post by Mark Wing - NM
Sat Mar 25, 2023 10:49 am
model T keys For Sale $8 ea, shipped

Last post by fordrelic « Sat Mar 25, 2023 7:46 am
Replies: 5
by fordrelic » Sun Mar 12, 2023 8:49 am

First post

Still have Ford script keys. I have sold out of 55 and 63.
$8 shipped to lower 48.

Please pm

Last post

Thanks for the great response for keys.
I have several left, please send number(s) you are looking for and I will get back.

Thanks again.

5 Replies

685 Views

Last post by fordrelic
Sat Mar 25, 2023 7:46 am
1912 Holley carb F/S

Last post by Corey Walker « Fri Mar 24, 2023 8:16 pm
Replies: 4
by Layden Butler » Thu Feb 02, 2023 3:13 pm

First post

1912 Holley carburetor $185, domestic postage $12. Pictured later Holley goes with it.

Last post

I was answering an email and posted on this by mistake. Still a good buy though even without the elbow.

4 Replies

852 Views

Last post by Corey Walker
Fri Mar 24, 2023 8:16 pm
FS: Ford wrenches and 2 NOS babbit thrust washers

Last post by TSMock « Fri Mar 24, 2023 6:48 pm
Replies: 1
by bmklawt » Fri Mar 24, 2023 11:19 am

First post

I'll take best offer, any offer, plus shipping for this stuff, know idea whats its worth, I don't want them and don't want to throw them away.
Ford wrench USA-M-01A-17014, open end 13/16 , closed end 21/32
@ 2, Ford wrench USA-M-40-17014, open end 1 , closed end 11/16
Sizes near as I can tell
2 babbit differential thrust washers, appear NOS

Last post

I would like to purchase these from you. PM sent

1 Replies

529 Views

Last post by TSMock
Fri Mar 24, 2023 6:48 pm
WTB 30 x 3.5 disc wheels

Last post by namdc3 « Fri Mar 24, 2023 5:33 pm
Replies: 5
by blauvelt » Thu Mar 23, 2023 5:11 pm

First post

Looking for a set of 30 x 3.5 disc wheels, thanks!

Last post

Happens!! How was it this year. Made it last year during peak gas, according to the regulars, it was smaller than normal.

I was hoping the owner would see this and link up with you if still available. It was good! I don't know numbers, but the general feel was about the same as last year - I felt like the north building was down, outside was...

5 Replies

675 Views

Last post by namdc3
Fri Mar 24, 2023 5:33 pm
Early T Rear Axle on Facebook

Last post by Tim D « Fri Mar 24, 2023 3:56 pm
Replies: 1
by CudaMan » Fri Mar 24, 2023 1:05 pm

First post

For those who do Facebook, there is a gentleman selling an early T rear axle. I have no connection to the seller or the listing.

Last post

It is located in Wichita KS

1 Replies

516 Views

Last post by Tim D
Fri Mar 24, 2023 3:56 pm
Round fellow wheels

Last post by Joe Bell « Fri Mar 24, 2023 2:26 pm
Replies: 1
by Dollisdad » Fri Mar 24, 2023 12:34 pm

First post

Looking for a set (2-30x3 and 2-30x3 1/2) early round fellow wheels. Original unrestored, good enough for display purposes. Will not be driven on. If they have old tires - all the better! Single, pair or set. Also looking for original mother-in-law seat with poor upholstery. Thanks for your help.

Last post

Tom, I may have what you are looking for will have to go up in hay mow and look.

1 Replies

436 Views

Last post by Joe Bell
Fri Mar 24, 2023 2:26 pm
FOR SALE - TURNER WHIPER TIMER FOR FORDSON TRACTORS, NEW OLD STOCK

Last post by Jay In Northern Ca. « Fri Mar 24, 2023 11:24 am

by Jay In Northern Ca. » Fri Mar 24, 2023 11:24 am

This is a new never used Aluminum body timer setup for a Fordson tractor but could be rewired to fit all Model T's. The length of the armored cable housing is 24 inches and the longest wire is 33 inch's from the timer body. A new brush from the vendors for these sells for $42.95 alone. I am asking $85 for the complete setup of timer and brush,...

0 Replies

372 Views

Last post by Jay In Northern Ca.
Fri Mar 24, 2023 11:24 am
FOR SALE - PAIR OF MODEL T ERA TIGER-EY 3" REFLECTORS NOS IN THE ORIGINAL BOX'S

Last post by Jay In Northern Ca. « Fri Mar 24, 2023 11:03 am

by Jay In Northern Ca. » Fri Mar 24, 2023 11:03 am

Spoken For - These are in excellent original condition in their original box's. Mount the reflector's on your car and display the box's on your collection shelf . Asking $75 for the pair plus small flat rate postage in the U.S.
Tiger-ey reflectors 1.jpg Tiger-ey reflectors 2.jpg Tiger-ey reflectors 3.jpg

Email address below and NOT the personal...

0 Replies

370 Views

Last post by Jay In Northern Ca.
Fri Mar 24, 2023 11:03 am
Model T connecting rod mold

Last post by Gene_French « Fri Mar 24, 2023 10:54 am
Replies: 12
by Gene_French » Sat Feb 06, 2021 8:55 am

First post

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $85 plus $7.60 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Last post

to the top again ...thanks MTFCA

12 Replies

2882 Views

Last post by Gene_French
Fri Mar 24, 2023 10:54 am
WTB: Stevens Sea Lion and Arbors

Last post by TWrenn « Fri Mar 24, 2023 9:56 am
Replies: 8
by Smbayley » Sat Mar 18, 2023 5:26 am

First post

WTB: Stevens Sea Lion and Arbors

A fellow T Ford hobbiest recently purchased this Stevens Conrod Alignment Fixture. However it is missing the sea lion and arbours.

Does anyone by chance have a sea lion, arbours or both spare?

Thanks Simon

Last post

Here I thought this is what you were looking for! :lol:
Learn something new every day...

8 Replies

1074 Views

Last post by TWrenn
Fri Mar 24, 2023 9:56 am
WTB (any brand) Original Driving Plate Bushing Reamer

Last post by Smbayley « Fri Mar 24, 2023 1:21 am
Replies: 8
by Smbayley » Wed Mar 01, 2023 3:31 am

First post

Hi all - looking to purchase a KRW Driving Plate Bushing Reamer.
I have attached a pic of what I am looking for. Any leads would be be appreciated.

Please email or DM if you can help.

Regards
Simon

Last post

Open to any brand reamers that would do this job? Message me if you can help me out 😀

8 Replies

1144 Views

Last post by Smbayley
Fri Mar 24, 2023 1:21 am
WTB: UPDATE- KRW Wilson Transmission Bushing Reaming Fixture Reamers - all sizes please

Last post by Smbayley « Fri Mar 24, 2023 1:20 am
Replies: 20
by Smbayley » Sat Jan 07, 2023 10:33 pm

First post

Hi all,

Update - I have been fortunate to find the ticked reamers but missing a driver for the shell reamer & triple Gear Reamer I am hoping that someone will be able to help me out to complete this wonderful setup. Many Thanks Simon

Original Post:
Looking to buy a complete KR Wilson Transmission Bushing Reaming Machine. Reamers need to be in a...

Last post

Bump - any one have a spare driver for the shell reamer or a triple gear bushing reamer?

20 Replies

2695 Views

Last post by Smbayley
Fri Mar 24, 2023 1:20 am
Parting out '23 and '26 TT's.

Last post by FM2102 « Thu Mar 23, 2023 3:17 pm
Replies: 2
by FM2102 » Wed Mar 22, 2023 10:33 pm

First post

I posted an ad a month or two ago trying to sell these two trucks. Neither sold, so I am reluctantly going to part them out. The '26 is complete but apart, and the '23 is frame, running gear, with a rebuilt short block. I have many other parts including differentials, wheels, a C cab, steel cab for the '26, carbs, generators, starters, cast iron...

Last post

No Ruckstell parts. Not sure how to ID vaporizer parts. Most of the carbs are part carbs. Thanks for letting the guys know!

2 Replies

661 Views

Last post by FM2102
Thu Mar 23, 2023 3:17 pm
TT seat cushions

Last post by Nunsio1 « Thu Mar 23, 2023 8:49 am
Replies: 5
by BUSHMIKE » Wed Mar 22, 2023 9:34 am

First post

WTB. I would like to find a couple nice useable seat cushions for the steel cab TT. I realize that I can buy repops but much prefer a useable used set. Thanx!

Last post

Sorry should have been posted on discussion page!

5 Replies

621 Views

Last post by Nunsio1
Thu Mar 23, 2023 8:49 am
WANTED Information on a 30 April 1920 Shebler Patent

Last post by Southfork Creek « Wed Mar 22, 2023 8:02 pm
Replies: 10
by J1MGOLDEN » Sun Mar 19, 2023 1:48 pm

First post

I need Information on a 30 April 1920 Shebler Updraft Patent, as to what carburetor was designed to go with it and if it is worth trying to install and operate. Jim Golden, Bowie, aryland

Last post

You can pull up all the patents granted on that date. And just start looking for the one you want. I have done that for various model t aftermarket parts. There may be several hundred on a given day, so this is typically about a 3 beer project, at least for me.

10 Replies

893 Views

Last post by Southfork Creek
Wed Mar 22, 2023 8:02 pm
Full Flow Float Valves - Spring Production complete - shipments going out! Get ready for Touring Season

Last post by JohnM « Wed Mar 22, 2023 6:32 pm
Replies: 7
by Scott_Conger » Wed Mar 01, 2023 4:23 pm

First post

If you requested valves prior to 2/28/23, and they were out of stock, I will be contacting you shortly, and prices will be at the old 2022 price.

Unfortunately due to significant material cost increases (my cost, up 25% over last year), valves will include price increases as I incur them. As of now, price complete with a superior sealing lead...

Last post

Got mine yesterday. Thanks Scott!

7 Replies

1338 Views

Last post by JohnM
Wed Mar 22, 2023 6:32 pm
Original KR Wilson Line Boring Jig

Last post by Alex Dragone « Wed Mar 22, 2023 4:44 pm
Replies: 1
by Alex Dragone » Tue Mar 21, 2023 10:34 am

First post

This is an original KR Wilson line boring jig for Model T. It is in very good condition complete with original bar. Nice unit for rebuilding engines. Asking $400 plus shipping. Thanks!

Last post

Price drop: $325 plus shipping. - Alex

1 Replies

569 Views

Last post by Alex Dragone
Wed Mar 22, 2023 4:44 pm
FS 26/27 Spindles

Last post by 25tfire « Wed Mar 22, 2023 3:36 pm

by 25tfire » Wed Mar 22, 2023 3:36 pm

FS one set of 26/27 Spindles to be restored, comes with new bushings to be installed and spindle nuts and washers. Threads are in good condition.
Asking $100 plus shipping by USPS Priority mail. Jim

0 Replies

354 Views

Last post by 25tfire
Wed Mar 22, 2023 3:36 pm
Jumbo Giant trans

Last post by Liberty Garage « Wed Mar 22, 2023 3:32 pm
Replies: 1
by Liberty Garage » Tue Mar 21, 2023 8:03 pm

First post

FOR SALE Jumbo Giant 3 speed with reverse. $200. Can deliver to Tulare swap in April DSCF8778.JPG DSCF8777.JPG

Last post

SOLD thanks MTFCA

1 Replies

525 Views

Last post by Liberty Garage
Wed Mar 22, 2023 3:32 pm
For sale, early style keyed drive plate & special parts. LOWERED PRICE

Last post by Adam « Wed Mar 22, 2023 12:31 pm
Replies: 5
by Adam » Sat Dec 17, 2022 1:56 pm

First post

3/22 Lower Price: Here is an early keyed drive plate and all the rest of the special parts required to use it. The fourth main journal and square socket are in excellent condition. $70. Email if you’re interested. Please do not post here or send a pm. I don’t receive them. Thanks!

7843A2D2-4A0C-495F-805B-2EA25E632A36.jpeg

Last post

Lowered price

5 Replies

1282 Views

Last post by Adam
Wed Mar 22, 2023 12:31 pm
distributor

Last post by TRDxB2 « Wed Mar 22, 2023 11:53 am
Replies: 1
by Melba Nolan » Wed Mar 22, 2023 10:27 am

First post

for sale: Bosch distributor $200 plus shipping
20220607_092206.jpg

Last post

Interested email sent

1 Replies

410 Views

Last post by TRDxB2
Wed Mar 22, 2023 11:53 am
Still looking…maybe someone will rent one to me?

Last post by ThreePedalTapDancer « Wed Mar 22, 2023 11:36 am
Replies: 3
by kgibbo » Mon Mar 20, 2023 11:30 pm

First post

Want to buy a Magneto Gauge Tool - KRW reproduction. If you aren’t selling one, will you rent one to me?

Last post

Maybe you can make one?

3 Replies

709 Views

Last post by ThreePedalTapDancer
Wed Mar 22, 2023 11:36 am
WTB: Spindle Arm

Last post by Steve Jelf « Wed Mar 22, 2023 1:37 am
Replies: 2
by Steve Jelf » Tue Mar 21, 2023 1:01 am

First post

#2696B (Right). That's the one with a hole for mounting a speedometer swivel.

Last post

Got it. Thanks, folks.

2 Replies

493 Views

Last post by Steve Jelf
Wed Mar 22, 2023 1:37 am
OT: Stromberg OD-1 carburetor part needed choke part

Last post by Mark Gregush « Tue Mar 21, 2023 10:09 pm
Replies: 4
by Mark Gregush » Fri Dec 30, 2022 12:30 pm

First post

Know you guys have other stuff in your collection so thought I would ask here too.
Looking for the elbow(s?) that holds the choke and is mounted to main body of a made for Dodge Brothers Stromberg OD-1 carb. The mounting holes would be approximately 1-7/8 center to center. I was hoping the part from my OS-1 would fit but was too wide. While there...

Last post

30+ days bump :)

4 Replies

858 Views

Last post by Mark Gregush
Tue Mar 21, 2023 10:09 pm
FS BOSCH FRONT PLATE

Last post by Mark Chaffin « Tue Mar 21, 2023 9:43 pm
Replies: 1
by Mark Chaffin » Mon Mar 20, 2023 12:15 pm

First post

Aluminum Manocchi reproduction Bosch front plate with cam gear and nut. In excellent condition. Price is $200 with free domestic shipping. Mark Chaffin (951) 805-0928

Bosch 1.jpg

Bosch 2.jpg

Last post

Sold to Craig. Thanks Craig!

1 Replies

512 Views

Last post by Mark Chaffin
Tue Mar 21, 2023 9:43 pm
For Sale Muncie 3 speed truck transmission

Last post by Liberty Garage « Tue Mar 21, 2023 9:33 pm
Replies: 4
by Liberty Garage » Sun Mar 05, 2023 2:43 pm

First post

Muncie 3 speed and reverse TT truck transmission. $350 Pickup in northern Calif or I can bring to the Tulare DSCF8771.JPG DSCF8770.JPG swap meet in April.

Last post

SOLD!! THANKS MTFCA

4 Replies

985 Views

Last post by Liberty Garage
Tue Mar 21, 2023 9:33 pm
I Want a Ahooga Horn

Last post by Larry « Tue Mar 21, 2023 7:41 pm
Replies: 12
by BLB27 » Fri Feb 24, 2023 5:43 pm

First post

I want a Ahooga horn for my 1927 coupe.

Last post

Sold: klaxon Electric 6 volt Ahooga Horn

12 Replies

1684 Views

Last post by Larry
Tue Mar 21, 2023 7:41 pm
26/27 Long Fan Hub FS

Last post by Dan Hatch « Tue Mar 21, 2023 5:12 pm
Replies: 1
by Dan Hatch » Mon Mar 20, 2023 2:45 pm

First post

Here is my last long hub 26/27 fan hub. These were for the 3 row radiator. Has beef mounted and used but doesn’t look like for very long. $25 + shipping. Email me at address in pictures. Thanks Dan.
CFD52C9C-0A7D-4738-B173-F3B19ED7E0BB.jpeg
E5750728-8A76-4C2B-8488-011B90349236.jpeg
990CE7A9-EDD0-4946-B2CF-ACD4C49D664B.jpeg...

Last post

Spoken for. Thanks Dan

1 Replies

346 Views

Last post by Dan Hatch
Tue Mar 21, 2023 5:12 pm
F-S 2 Older Rebuilt short blocks 1919 and 1924

Last post by ThreePedalTapDancer « Tue Mar 21, 2023 5:05 pm
Replies: 3
by FATMAN » Fri Mar 17, 2023 9:52 am

First post

In the last estate sale I purchase I also got 2 rebuilt short blocks
1 is a 1919 the other is a 1924 the son who I bought these from says they were done by Effingham years ago, the father is now in a nursing home with no memories of much to little about where all the paperwork is, they look good with new pistons, lifters, valves, push rods, and...

Last post

The price is in the description.

3 Replies

692 Views

Last post by ThreePedalTapDancer
Tue Mar 21, 2023 5:05 pm
WTB Old Faithful Oiler Kit, narrow Kevlar linings

Last post by Mark Gregush « Tue Mar 21, 2023 4:42 pm
Replies: 1
by Steve King » Tue Mar 21, 2023 1:35 pm

First post

Looking to purchase an Old Faithful Auxiliary Oiler. If you have one you want to part with, send me a PM with a price. I'm not concerned about the copper line being with the kit, as long as I have the cover, catch screen reservoir, and the pan adapter fitting. Another item on the grocery list is a set of narrow Kevlar band linings, but I expect...

Last post

If you can only find the cover and catch screen (seem to be more of those out there), you might think about just plumbing it into the side of the pan. That is what I am going to do. Think Chaffin's was making reproductions of them?

1 Replies

321 Views

Last post by Mark Gregush
Tue Mar 21, 2023 4:42 pm
FS early model T parts and WTB Ford TT steel cab doors

Last post by Tourabout « Tue Mar 21, 2023 4:21 pm
Replies: 4
by footpowered » Mon Mar 20, 2023 6:26 pm

First post

NO LONGER AVAILABLE
I'm posting this for a friend that doesn't have internet access.

PM me for his contact info. Include your email address in the PM

Parts must be picked up near Lanesville Indiana

Use this link for photos:

$1200 for the following 1909-1912 parts:
Early Frame 1909-1913
Right splash apron 1911
Pair rear fenders and...

Last post

I emailed him too

4 Replies

983 Views

Last post by Tourabout
Tue Mar 21, 2023 4:21 pm
WTB Accessory Truss Rod Setup for Rear End

Last post by andrew o sullivan « Tue Mar 21, 2023 2:49 pm
Replies: 1
by 1913Runabout » Wed Mar 15, 2023 5:30 pm

First post

Looking for an original truss rod setup that goes on the rear end of a model T passenger car. It strengthens the rear end. I am aware of the reproduction parts. Anyone have an original they would sell?
Thanks,
Brian

Last post

hi there there hard to find i got two sets about four years ago and put them on my ts, I'm looking when i go to Hershey every year but very hard to find . give Don Lang a buzz ,He would be worth a ring ... swamp meets you might find them. best of luck

1 Replies

459 Views

Last post by andrew o sullivan
Tue Mar 21, 2023 2:49 pm

New Topic

19803 topics

Page 37 of 199
- Jump to page:
Previous
1
…
35
36
37
38
39
…
199
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum