Parts Organization

Posts that have nothing to do with the Model T. You can post here or OT posts will be moved here.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Mustang1964s
Posts: 254
Joined: Sun Jan 06, 2019 10:48 pm
First Name: Steve
Last Name: Bourgeois
* REQUIRED* Type and Year of Model Ts owned: 1914, 1926
Location: Waco, TX
MTFCA Number: 29784
MTFCI Number: 22970
Board Member Since: 2007

Parts Organization

Post by Mustang1964s » Fri Jul 31, 2020 8:35 pm

I have a new bigger garage that is filling fast. Shelves are being built.
The parts are being sorted, the issue is how to get them organized.
I need some ideas on how to keep the little stuff like head gaskets/ header gaskets/ specialty bolts ect...
How do you store engine parts and transmission and the small stuff.

Any and all help would be greatly appreciated.

User avatar

CudaMan
Posts: 2398
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
MTFCA Number: 30944
MTFCI Number: 23667
Board Member Since: 2013

Re: Parts Organization

Post by CudaMan » Fri Jul 31, 2020 8:55 pm

I use Plano clear plastic tackle boxes for the small stuff. :)

https://www.grainger.com/product/30F072 ... 8006005229!
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)


Dallas Landers
Posts: 2789
Joined: Sun Jan 06, 2019 12:26 pm
First Name: Dallas
Last Name: Landers
* REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
Location: N.E. Indiana
MTFCA Number: 49995

Re: Parts Organization

Post by Dallas Landers » Fri Jul 31, 2020 9:25 pm

I have a shed ( or two) for parts. I hang them on the wall with wire. Shackles, perches,brachets, horns, lights ect. No digging through boxes or shelves. Fuel tanks, radiators, rad shells all have someplace to twist a wire and hang them up. Small parts I am using organisers with all the little draws. Label the front of the draw.

User avatar

A Whiteman
Posts: 1011
Joined: Sun Jan 06, 2019 3:36 pm
First Name: Adrian
Last Name: Whiteman
* REQUIRED* Type and Year of Model Ts owned: 1926 TT, 1924 Colonial Roadster, 1924 'Bullnose' Morris, 1925 'Bullnose' Morris, 1936 JD AR
Location: South Island, New Zealand

Re: Parts Organization

Post by A Whiteman » Sat Aug 15, 2020 5:46 am

Wooden boxes made from ply and odd bits of wood. I made them to 'standard sizes' so they fit in shelves in 'combinations'. All boxes are the same length, just various widths so you can fit 1, 2, 4 or other combinations in each 'bay.
Narrow boxes with more dividers worked well for different bolt and nut sizes or smaller parts.
Fairly easy to make if you have a table saw or even a skill saw cutting to 'standard' widths and lengths, then nailed together (I have the luxury of an air nailer).
All have contents 'vivid' marked on the ends for quick reference.

User avatar

Rich Eagle
Posts: 6815
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID
MTFCA Number: 1219
Contact:

Re: Parts Organization

Post by Rich Eagle » Sat Aug 15, 2020 11:56 am

We throw away a lot of good parts containers. I like plastic oil bottles with tops cut off and Mixed Nut cans. I make labels for them.
Strg1.jpg
For these shackles I just nailed some boards to the side of my shelf. The bench with drawers was made form scrap lumber from a dumpster.
Strg2.jpg
Nails on rafters are great parts hooks. Best for lighter parts than loading them too much.
Strg3.jpg
Rich
When did I do that?

User avatar

BE_ZERO_BE
Posts: 545
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA
MTFCA Number: 16897
MTFCI Number: 16628

Re: Parts Organization

Post by BE_ZERO_BE » Sat Aug 15, 2020 11:58 am

Banana Boxes. They are strong and durable.
Some of these are over 35 years old and still good as new.
And they are free at the grocery store.

 
IMG_0628 (Medium).JPG
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.

User avatar

BE_ZERO_BE
Posts: 545
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA
MTFCA Number: 16897
MTFCI Number: 16628

Re: Parts Organization

Post by BE_ZERO_BE » Sat Aug 15, 2020 1:09 pm

I put my small parts organizers an a lazy-susan turntable.
It gives me a very high density storage on a small footprint.
It is also harder to stack stuff in front of to block access.
 
IMG_0625 (Large).JPG
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.

Post Reply Previous topicNext topic