Bumper Plates:
Help identifying parts
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Ken Buhler
Topic author - Posts: 427
- Joined: Mon Jan 21, 2019 4:14 pm
- First Name: Ken
- Last Name: Buhler
- * REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
- Location: Kelowna B.C.
- MTFCA Number: 49471
- Board Member Since: 2012
Help identifying parts
I have parts that someone may need. When they are identified, I will move them to the classifieds. Thank you in advance.
Bumper Plates: Dome Light:[attachment=0]DL2.JPG[/attachment)
Bumper Plates: Dome Light:[attachment=0]DL2.JPG[/attachment)
- Attachments
-
Work honestly
Stay true to your word
Get the job done right
Stay true to your word
Get the job done right
-
TheMoneyPit
- Posts: 25
- Joined: Sun Jan 06, 2019 7:37 pm
- First Name: Mark
- Last Name: Wetherbee
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor Sedan
- Location: Coastal NC
Re: Help identifying parts
Neither are Ford parts. The bumper plates look familiar but I cannot place them... for some reason I’m thinking Pontiac but that is just a WAG.
Try posting the questions on the AACA what is it section- here’s a link:
https://forums.aaca.org/forum/66-what-is-it/
Good people there and they are usually pretty quick with the answer
Try posting the questions on the AACA what is it section- here’s a link:
https://forums.aaca.org/forum/66-what-is-it/
Good people there and they are usually pretty quick with the answer
There is no such thing as a “free” lunch... 
-
Ken Buhler
Topic author - Posts: 427
- Joined: Mon Jan 21, 2019 4:14 pm
- First Name: Ken
- Last Name: Buhler
- * REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
- Location: Kelowna B.C.
- MTFCA Number: 49471
- Board Member Since: 2012
Re: Help identifying parts
Thank you for that link Mark, I should have said I am aware they are not T.
Work honestly
Stay true to your word
Get the job done right
Stay true to your word
Get the job done right