Hey you hit/miss guys out there, I am looking for a pulley side flywheel for my newly aquired Stover. If anyone has any info/contacts thanks in advance.
Yes I have contacted flywheel supply.
Stover 1 1/2 Model K
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 6443
- Joined: Sun Feb 14, 2021 10:08 pm
- First Name: Pat
- Last Name: McNallen
- * REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
- Location: Graham, Texas
- MTFCA Number: 51486
- Board Member Since: 2021
Re: Stover 1 1/2 Model K
Does your engine have spoked flywheels or the ones with round holes in them?
-
Topic author - Posts: 209
- Joined: Fri Feb 07, 2020 2:26 pm
- First Name: Scott
- Last Name: Wendt
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor
- Location: Portland Maine
- MTFCA Number: 32419
Re: Stover 1 1/2 Model K
Pat my flywheels are the round hole style. Any leads on parts would be great, thanks.
-
- Posts: 6443
- Joined: Sun Feb 14, 2021 10:08 pm
- First Name: Pat
- Last Name: McNallen
- * REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
- Location: Graham, Texas
- MTFCA Number: 51486
- Board Member Since: 2021
Re: Stover 1 1/2 Model K
I have one complete, running Stover K 1 1/2 and one (Bad) crankshaft with 1 good flywheel. The flywheels on the bad crank both appear the same, and each has the number 12KS2 cast in. These flywheels have no other lettering on them. The complete Stover K has the same type flywheels, but they carry the number 12K2 and have the Stover name and Freeport Ill. cast into them. All these wheels have the circular holes.
-
- Posts: 365
- Joined: Thu Jan 17, 2019 11:52 am
- First Name: David
- Last Name: Menzies
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring and 1915 Touring both Canadian models
- Location: British Columbia
- MTFCA Number: 27825
- Board Member Since: 2012
Re: Stover 1 1/2 Model K
There is a Hit and Miss forum there are lots of parts there
Russell STOVER is a candy maker and I am going to superimpose the STOVER name on this model K. This is a Canadian model sold by the T EATON Company A long gone Canadian chain. My model K is complete but I have dismantled it for cleaning and restoration. The flywheels are holes and the magneto is the oscillating type that just goes back and forth. I also have a Fairbanks Headless 1917 that runs.-
- Posts: 1015
- Joined: Sun Jan 06, 2019 3:36 pm
- First Name: Adrian
- Last Name: Whiteman
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT, 1924 Colonial Roadster, 1924 'Bullnose' Morris, 1925 'Bullnose' Morris, 1936 JD AR
- Location: South Island, New Zealand
Re: Stover 1 1/2 Model K
Ah, I remember shopping at Eatons in the 90's during a trip to Vancouver, Canada. I seem to recall it was mostly a clothing type department store then. Another old company bit the dust. Maybe they should have stuck with machinery