Page 1 of 1
External Oil Pump Plumbing
Posted: Thu Feb 06, 2020 12:21 am
by ModelTWoods
For those running an external oil pump, driven either at the generator location, or belt or cam driven, how and where does your line from the pump enter the block? Through the side of the block casting, or through the side of the thinner crankcase pan?
Re: External Oil Pump Plumbing
Posted: Thu Feb 06, 2020 10:05 am
by Les Schubert
Through the side of the pan and located in the area of the centre main
Re: External Oil Pump Plumbing
Posted: Thu Feb 06, 2020 10:59 am
by Kevin Pharis
A couple of pics...
Re: External Oil Pump Plumbing
Posted: Thu Feb 06, 2020 3:07 pm
by walber
Also through the side of the pan near the center main.