When did the pan nose support change
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
JTT3
Topic author - Posts: 1383
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
When did the pan nose support change
I was selecting a needle nose pan to repair for an early block. As I lined a few up I recalled that the support for the nose of the pan was longer an surrounded the oil drip hole on the early but guess I didn’t realize that it was not the case for later needle nose pan. When did that change? Tried to look it up in Bruce’s book and on line but nothing clear on the date. Any one know? Thanks John
- Attachments
-
-
Joe Bell
- Posts: 1056
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: When did the pan nose support change
Early 13's still have the long one.
-
DanTreace
- Posts: 3323
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
- Location: North Central FL
- MTFCA Number: 4838
- MTFCI Number: 115
- Board Member Since: 2000
- Contact:
Re: When did the pan nose support change
Just as Joe posted.
From Bruce's C-D Encyclopedia:
From Bruce's C-D Encyclopedia:
- B69EEB16-A3B7-4FB8-9E8A-F3302B790CB2_4_5005_c.jpeg (12.88 KiB) Viewed 1593 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford