Side Mirror Options

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Allen Banks
Posts: 37
Joined: Sun Jan 06, 2019 7:29 pm
First Name: Allen
Last Name: Banks
* REQUIRED* Type and Year of Model Ts owned: 1923 Roadster
Location: Columbus, Ohio

Side Mirror Options

Post by Allen Banks » Mon Jun 01, 2020 8:35 am

I currently have a chrome clamp on mirror for my 23 roadster, but it constantly scratches up the windshield post. I thought about getting one that screwed to the post but I'm afraid if it's bumped, it'll damage the post. I guess I could live with the clamp mirror but I can't stomach the chrome and they don't seem to make a black one. Is there a source for a black hinged type mirror that looks period correct?
Thanks!


MWalker
Posts: 474
Joined: Fri Jan 04, 2019 9:49 am
First Name: Mike
Last Name: Walker
* REQUIRED* Type and Year of Model Ts owned: 1916 Roadster Pickup
Location: NW Arkansas
MTFCA Number: 314
MTFCA Life Member: YES

Re: Side Mirror Options

Post by MWalker » Mon Jun 01, 2020 8:53 am

The best mirrors I've found are sold by Antique Motor Sports in La Habra, CA. They attach to the hinge screws of open cars, and they wiggle much less than others so you can actually see out of them. They are available in black, brass, or chrome. http://www.antiquetmotorsports.com/

User avatar

Steve Jelf
Posts: 6452
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
MTFCA Number: 16175
MTFCI Number: 14758
Board Member Since: 2007
Contact:

Re: Side Mirror Options

Post by Steve Jelf » Mon Jun 01, 2020 9:30 am

On the runabout I use the clamp-on mirror sold by the parts dealers because I got it cheap in a pile of auction stuff. I pad the clamp with a bit of old inner tube to save the paint. Does it jiggle? Sure. This is a Model T. Does it jiggle so much that I can't see what's behind me? Nope.

https://www.youtube.com/watch?v=kNhMiW67cmw The camera is rather unsteady, as I was shooting one-handed while driving.

IMG_1125 copy.JPG

On the touring I have an old windshield mirror, also from a bunch of auction plunder.

IMG_2799 copy.JPG
I think new glass for it was $2 or $3. I made the clamp from a piece of electrical conduit, again with an inner tube pad to save the paint. No holes needed.
The inevitable often happens.
1915 Runabout
1923 Touring

User avatar

Rich Eagle
Posts: 6781
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID
MTFCA Number: 1219
Contact:

Re: Side Mirror Options

Post by Rich Eagle » Mon Jun 01, 2020 10:42 am

I made this mirror mount to eliminate the clamp on tubing problem.
It is explained in this discussion along with some other options.
Rich
REmirror1.jpg
http://r.search.aol.com/_ylt=Awr9F6_NEt ... mRX0xOnFo-
When did I do that?


Sarikatime
Posts: 621
Joined: Sun Jan 06, 2019 12:47 pm
First Name: Frank
Last Name: Seress
* REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
Location: Prescott, Arizona
MTFCA Number: 27707

Re: Side Mirror Options

Post by Sarikatime » Mon Jun 01, 2020 12:24 pm

I have the same side mirrors attached to the windshield frame. The factory bracket was so flimsy that it was useless, so, I cut 1/8 inch brass plate to put inside of the original holder one for each side and now it is nice and sturdy. Also have an old piece of water hose under the clamp to keep from scratching the frame. I do like the bracket that rich made but i have no access to a lathe to make the fancy parts. Frank


Dellpound
Posts: 37
Joined: Wed Jan 09, 2019 4:41 pm
First Name: Dell
Last Name: Pound
* REQUIRED* Type and Year of Model Ts owned: Looking
Location: San Marcos, CA
MTFCA Number: 17469

Re: Side Mirror Options

Post by Dellpound » Mon Jun 01, 2020 5:16 pm

You can make a very stable bracket out of electrical conduit. You will need a little bit longer bolt that goes thru the lamp and bracket.
Attachments
75827F95-7BD7-4E6A-A385-AC26E9BE0A3C.jpeg
C9285308-30A0-49A2-A27E-A728C5D676C8.jpeg

User avatar

RajoRacer
Posts: 4289
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Side Mirror Options

Post by RajoRacer » Mon Jun 01, 2020 7:41 pm

Clever mount there, Dell !

User avatar

Ed Fuller
Posts: 662
Joined: Mon Jan 07, 2019 10:06 pm
First Name: Ed
Last Name: Fuller
Location: NJ
MTFCA Number: 29582
MTFCI Number: 22818
Board Member Since: 2012

Re: Side Mirror Options

Post by Ed Fuller » Mon Jun 01, 2020 8:15 pm

I agree with Mike Walker. The mirrors made by Antique T Motor Sports are the best.

One of my T’s had the type in Steve Jelf’s picture. No matter what, I was never able to get it tight enough to stop moving around without causing damage to the windshield frame. I tried a piece of rubber as well with no luck. Best thing I did was to take it off and replace it with one from Antique T Motor Sports.

User avatar

KirkieP
Posts: 153
Joined: Tue Jan 08, 2019 1:18 pm
First Name: Kirk
Last Name: Peterson
* REQUIRED* Type and Year of Model Ts owned: 27 Touring 24 Coupe
Location: Santa Fe, NM
MTFCA Number: 345
MTFCA Life Member: YES
MTFCI Number: 141
Board Member Since: 2005

Re: Side Mirror Options

Post by KirkieP » Mon Jun 01, 2020 8:47 pm

I totally agree with Mike and Ed.
I purchased a set from Bill a few years ago at Chickasha. Well worth the dough.
20200601_184418.jpg
Kirk Peterson
Santa Fe NM

Post Reply Previous topicNext topic