I was going to lable this "My what a large Bend X you have" but my wife suggested other wise.
A while back I bought an interesting Bend X of eBay. I knew as soon as I got it out of the mailbox I knew it wasn't a T bendix before opening the box. It was very heavy. After cleaning it up I find it just beautiful, almost a work of art.
Its huge and I was wondering if anyone knows what this goes to.
It takes a 3/4 inch shaft in each end.
OT - Mystery Bend X
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Jim_PTC_GA
Topic author - Posts: 176
- Joined: Sun Jan 06, 2019 1:18 pm
- First Name: James
- Last Name: Fisher
- * REQUIRED* Type and Year of Model Ts owned: 1924, 1925-ish
- Location: Pine Mountain Georgia
- MTFCA Number: 31822
- Board Member Since: 2016
-
Jim_PTC_GA
Topic author - Posts: 176
- Joined: Sun Jan 06, 2019 1:18 pm
- First Name: James
- Last Name: Fisher
- * REQUIRED* Type and Year of Model Ts owned: 1924, 1925-ish
- Location: Pine Mountain Georgia
- MTFCA Number: 31822
- Board Member Since: 2016
Re: OT - Mystery Bend X
Stamping on part of it
- Attachments
-
Just give me time to Rust and I'll be good as new. 
Wabi-Sabi
Wabi-Sabi-
ironhorse
- Posts: 401
- Joined: Mon Jan 07, 2019 7:59 am
- First Name: G.R.
- Last Name: Cheshire
- Location: La Florida
- MTFCA Number: 29759
Re: OT - Mystery Bend X
Just a Guess but it looks like one I pulled from a stationary generator many years ago.
Do it right or do it over,your choice. Drive like everyone is out to get you!
-
Mark Anderson
- Posts: 31
- Joined: Fri Jan 18, 2019 3:30 pm
- First Name: Mark
- Last Name: Anderson
- Location: Stratford Iowa
Re: OT - Mystery Bend X
Looks like a Bendix off a farm tractor starter.