So something has been nagging in the back of my head for a while. When I got my TT all body work and paint had been done. On a whim, I decided to go up to that attic and unwrap one of the front fenders and sure enough no mounting holes have been drilled and the mounting brackets haven’t been installed. Such a shame because it’s all been painted and looks perfect. Good thing I know a great body man...... this may get more expensive.
Brad
Restoration woes.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 5256
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Restoration woes.
Brad, that's the way they come. You Have to find your own brackets from old fenders and fit them. There is a positive in your case. The fender is painted where the brackets go, so they will not rust between the bracket and top. Remember there are two brackets for each front fender.
Allan from down under.
Allan from down under.
-
- Posts: 387
- Joined: Sun Jan 06, 2019 11:04 am
- First Name: Tim
- Last Name: Rogers
- * REQUIRED* Type and Year of Model Ts owned: 1925 Coupe & 1923 Runabout
- Location: South of the Adirondacks
- Board Member Since: 2013
Re: Restoration woes.
Applying paint to body panels and pieces is the very last thing that is done during a restoration. The body should be assembled prior to painting to avoid what has happened in your situation.
<o><o><o><o> Tim Rogers - South of the Adirondacks - Forum member since 2013 <o><o><o><o>
-
- Posts: 3923
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
- MTFCA Number: 28924
Re: Restoration woes.
That’s something that’s overlooked. New fenders don’t have the brackets.
The reason is probably that the original brackets were pressed into shape on a press and the cost to reproduce them wouldn’t be cheap.
Lots of old rusted up fenders have gone to the scrap yards when the brackets should have been saved.
Fender brackets aren’t hard to install and lots of info on the forum about ways to do it. It’s not as difficult as you think.
It helps a lot to have the old fender to go by when replacing them.
The reason is probably that the original brackets were pressed into shape on a press and the cost to reproduce them wouldn’t be cheap.
Lots of old rusted up fenders have gone to the scrap yards when the brackets should have been saved.
Fender brackets aren’t hard to install and lots of info on the forum about ways to do it. It’s not as difficult as you think.
It helps a lot to have the old fender to go by when replacing them.