1922 Center Door project
Posted: Sun Aug 23, 2020 7:04 pm
Haven't posted on my project in a while. I just got more pieces this past weekend.
The running gear after I jacked it up and put four replacement wheels on it. The original wheels were rotted through.
The engine didn't turn when I got it, now it does. I oiled the bores and with a 2 x 4 scrap, I lightly tapped each piston using a 2 pound hammer
parts you don't see are 5 demountable rims that need blasting and coating.
The running gear after I jacked it up and put four replacement wheels on it. The original wheels were rotted through.
The engine didn't turn when I got it, now it does. I oiled the bores and with a 2 x 4 scrap, I lightly tapped each piston using a 2 pound hammer
parts you don't see are 5 demountable rims that need blasting and coating.
