Stevens Tools
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
FordFool
Topic author - Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Stevens Tools
Is there a re pop Stevens tool catalog available. I recently picked up a few Stevens tools and would like to look them up. One is a T 122. Thanks in advance. Don
-
CudaMan
- Posts: 2398
- Joined: Fri Jan 04, 2019 4:17 pm
- First Name: Mark
- Last Name: Strange
- * REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
- Location: Hillsboro, MO
- MTFCA Number: 30944
- MTFCI Number: 23667
- Board Member Since: 2013
Re: Stevens Tools
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
-
Pep C Strebeck
- Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Stevens Tools
Stevens T-122, Drive Shaft Sleeve Puller:
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
FordFool
Topic author - Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Re: Stevens Tools
Thanks Cudaman. That’s what I was looking for.
Pep mine looks a lot more primitive than that one. Don
Pep mine looks a lot more primitive than that one. Don
-
DanTreace
- Posts: 3322
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
- Location: North Central FL
- MTFCA Number: 4838
- MTFCI Number: 115
- Board Member Since: 2000
- Contact:
Re: Stevens Tools
Here is link to on-line copy of Stevens Catalog.
http://www.cimorelli.com/mtdl/unknown-y ... atalog.pdf
http://www.cimorelli.com/mtdl/unknown-y ... atalog.pdf
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Pep C Strebeck
- Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Stevens Tools
There were 2 versions of the tool, utilizing the same number. The later one shown above and the earlier style shown below.
- stevens122.jpg (63.86 KiB) Viewed 2072 times
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
RajoRacer
- Posts: 4348
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: Stevens Tools
Best tools produced for a Model T - I have K.R. Wilson tools also but I prefer the Stevens.
Here's the complete Stevens kit in the original box for the Ford driveshaft with the d.s. sleeve puller.
Here's the complete Stevens kit in the original box for the Ford driveshaft with the d.s. sleeve puller.
- Attachments
-
-
RajoRacer
- Posts: 4348
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: Stevens Tools
Joseph - how did you come by to dating that T-122 ?
-
Pep C Strebeck
- Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Stevens Tools
Steve,
The examples of the earlier/later styles were shown in a couple of original print ads that I have. They are in 1 of 2 filing cabinets and I will do my best to locate them and post them when I find them. I may have the order mixed up as to which is earlier and later but when I find the ads we can straighten that out.
As for the one that is in the first photo I posted, there are 2 different versions of that one. The only real difference is the T handle that goes through the threaded section. The one is a more "permanent" attachment, as shown below:
- Stevens-sleeve-puller2s.jpg (43.5 KiB) Viewed 1908 times
And the other, is removable and there is a set screw in the square section:
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
FordFool
Topic author - Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Re: Stevens Tools
Pep That’s the one I have.
-
RajoRacer
- Posts: 4348
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: Stevens Tools
Thanks for the response Joseph !