MTFCA Forum

I am need of a person in the Portland Oregon area who has a pan streighting jig. Please call or e-mail me with any help you can supply. Tom

I am also in the Portland area, and also have the same need.

Since you're both on the west coast i would try these guys.
http://www.antiqueautoranch.com/newwebs ... ranch.html

I don't know of anyone in Oregon but Bill Bender in Burien and Steve Tomaso in Longbranch both have pan jigs. A bit of a drive north but if arranged in advance could likely be a one day up and back trip. Let me know if you need email addresses or phone numbers.

Tom brought his up to me the other day - thanks for the plug, Bob.

Rajo 23, See the post that are connected to this link. Jack S. is not able to do any thing at this time.
Steve Tomaso is a good place to take your paan. Tom

BE_ZERO_BE wrote: ↑

Sun Aug 30, 2020 12:45 pm

If anyone in Portland knows where a pan jig is, it would be Jack in Tualitan.
PM or email me and I will give you his number.

Jack's jig is not usable. He does not have the end pieces and it needs to be surfaced. It was used as an anvil so is presently in tough shape.

My apologies Walt - thanks for the plug !

Thanks for the info!