MTFCA Forum

Posted: **Sat Aug 29, 2020 7:13 am**

We are only 5 weeks away from our one-time-only, "Fall" Mid Atlantic Pre-war Swap Meet, in beautiful Luray Virginia. Use this thread to let us know what you are bringing to sell!! See you there!

Posted: **Sat Aug 29, 2020 9:05 am**

I"ll have with me the following:
1913 block - needs some work to make it serviceable
23-25 Fordor rear fenders
26/27 block - Free to any kid under the age of 18...
and a bunch of other Model T stuff....

Plus, I will have some Maxwell 2-cylinder stuff with me.

Everything will be sold on a first come basis at the show.

Posted: **Sat Aug 29, 2020 11:21 am**

What is the vendor fee?

Posted: **Sat Aug 29, 2020 4:14 pm**

Can deliver to Luray:
1. '26 block, been to the machine shop, bored .40 over. No cracks or repairs.
Crank machined with matching babbitted rods. .40 over high compression pistons (no rings) $350.00
2. '26,'27 hogs head with pedals. $75.00
3. 4 dip bottom pan, nice. $75.00
4. '15? Brass radiator. Been tanked and repaired. $850.00
5. nice set of structs. $50.00
6. '26, '27 rear end. Needs backing plates and brake bushings. Removed from running car and installed ruckstell. $200.00
7. Driveshaft as above. $100.00

Pictures on request.
divco100b@icloud.com

Posted: **Sun Aug 30, 2020 10:10 am**

I won't be bringing anything to sell, as I'm flying in from California. I just hope the VFW'S bar will be open during the day! It will be nice to see everybody. Most everything has been cancelled this year.

Posted: **Sun Aug 30, 2020 4:51 pm**

Vendor fee is $40, payable at the door.
Larry, I dont think the VFW bar will be open, but there will be plenty of stocked coolers I imagine!

Posted: **Mon Aug 31, 2020 7:51 am**

https://www.mapwsm.com/

$40 for a 12 x 30 space. They would like to know by today if you will be setting up.

Posted: **Mon Aug 31, 2020 11:05 am**

I will be bringing misc. Model T parts. All post 1917. I will have an early turtle deck. Rootleib rear fenders for 19- 25, small parts, wheels, Model T tools, and some early V8 stuff If I have room.

Posted: **Mon Aug 31, 2020 11:41 am**

Be there with pick-up full of big and small Model T parts, '21 and up (no sheet metal); Engine parts, gen, starter(non working); set wood 30" demountable wheels, rims, tires. Set 5 redone 21" split rims; low radiator; low firewall with coil box, other goodies all marked with pandemic prices.

Posted: **Mon Aug 31, 2020 7:36 pm**

The response date for RSVP is not in concrete. We used that for an estimate on how many people are vending. Unless we get tapped out on space, people wont be turned away.

Posted: **Mon Aug 31, 2020 8:41 pm**

I’ll be there with misc T and A parts plus my 1929 Model A Phaeton. 1992 AACA Grand National Award winner driven regularly through the years with new tires and needing nothing but a new owner.

Posted: **Mon Aug 31, 2020 9:00 pm**

I'll be shopping for a useable 27 transmission.

Posted: **Tue Sep 01, 2020 5:43 pm**

i'm bringing a 26 chassis complete with engine and tranny rear end it has a 24 roadster body that has been re wooded ready to paint no interior or top material but new top bows seat springs but no upholstery complete set f fenders and running boards also and an extra running engine tranny set up also some extra front axles and a set of wood demountable wheels and rims plus more

Posted: **Wed Sep 02, 2020 1:42 pm**

I'll be bringing early coils and parts, new Heinze coilbox and coils, top straps and hardware, Larry Smith, rewound field coils, a couple new 1913-14 gas generators, correct nut and bolt sets, a lot of miscellaneous new and used parts including several never before available new items.

My brother Jon will be there in his own spaces with his new wood top bows, floorboards, and other wood parts.

Posted: **Wed Sep 02, 2020 1:52 pm**

Coming to see what's there and visit old friends. Anyone got any early spark plugs for my collection?
Thanks,
Terry

Posted: **Thu Sep 03, 2020 11:52 am**

is there any entrance expense to buy things at the meet if you isn't a vendor?

Posted: **Thu Sep 03, 2020 6:00 pm**

I can only attend 1 day, which day do you expect to be the best. Just wondering If many vendors will be coming the 7th or the 8th. Any suggestions.

Posted: **Thu Sep 03, 2020 8:07 pm**

Richard,
If I were you I would attend Tuesday morning as that will be your best bet to see the most stuff.
I have not had any vendors say they would be here late.
Thank you and hope to see you at the meet

Posted: **Fri Sep 04, 2020 8:56 am**

I'll be driving 1,000 miles from South Florida and am anxious to go. I'll be sell a lot of miscellaneous T parts and I'll be looking for some Ruckstell parts to complete an assembly, in particular the shift fork mechanism for a small drum (13-25).

Posted: **Fri Sep 04, 2020 10:31 pm**

I’m planning on going to this swap meet, I’ve never been to one before. Cash is king but how prevalent are cards used as payment? Just curious.

Darin

Posted: **Sat Sep 05, 2020 8:55 am**

Darin

Just about zero on credit/debit card transactions at small car swap meets. Only larger ones with commercial vendors who take such. Private sellers prefer cash. And, don’t count on the vendor to be a banker either!

Pretty frustrating for a seller to have a buyer give a reasonable , even if a bit low offer, only to have the seller accept, and then the buyer hands a $100 bill for payment on a $15 purchase

and expects ready change in return.

Posted: **Sat Sep 05, 2020 9:12 am**

Dan very good to remind folks of that. Bring some small bills not just all $100.00 bills.

Posted: **Sat Sep 05, 2020 11:07 am**

Folks... so everyone knows, we plan to have an ATM at the Luray meet for everyone's convenience.

Posted: **Sat Sep 05, 2020 7:33 pm**

Excellent!

Posted: **Mon Sep 07, 2020 11:19 am**

Just a month away now, Hope we can get a big crowd to come out and support this swap meet !

Posted: **Tue Sep 08, 2020 9:19 am**

I am considering going this year,I went a couple years ago and it was RAINING bigtime.

Posted: **Tue Sep 08, 2020 11:09 am**

I am bringing

Aluminum hogshead
23" Kelsey rear TT wheels and rims.
Reverse Pedal Extensions
Running board tool boxes
Maybe some Boyco cans.

Posted: **Mon Sep 14, 2020 9:37 am**

We are thinking about attending the swap meet in a few weeks. I buy and sell NOS ignition parts (dist caps, points, rotors, brushes etc) for most makes and model of cars and trucks from 1910 to 1960. We have parts all the way from Auburn to Willys I will not pull my vending trailer all the way to Luray (1268 miles) but would consider bringing parts for individuals who preorder. You may email me at tsvanmeet@gmail.com with your requests or that of a friend.

Posted: **Tue Sep 15, 2020 9:01 pm**

I'll be looking for a 27 Roadster gas tank with a baffle that doesn't rattle!

Posted: **Tue Sep 15, 2020 9:26 pm**

I have a friend that I think is coming that has a 26-27 gas tank for sale.

Posted: **Wed Sep 16, 2020 1:31 pm**

Dennis Fleming wrote: ↑
Tue Sep 15, 2020 9:26 pm
I have a friend that I think is coming that has a 26-27 gas tank for sale.

I'll be looking for him!

Posted: **Wed Sep 16, 2020 4:07 pm**

Received a confirmation email today. They have a record number of 58 vendors occupying 96 spaces.

Posted: **Wed Sep 16, 2020 9:44 pm**

That sounds like great news for the organizers and folks who plan on attending.

Anyone bringing some Model T rebuilt carbs?

Darin

Posted: **Thu Sep 17, 2020 9:04 am**

I am looking for a 1917 block. It can be junk, really what I prefer.

Posted: **Thu Sep 17, 2020 10:54 am**

Greg, I have a Sept. 1916 block if you're interested. That would be a very early '17 block. It's pretty rusty but could probably be used. The price is right if you want it!

Posted: **Thu Sep 17, 2020 3:03 pm**

Just curious, how much would you sell the block for?

Posted: **Thu Sep 17, 2020 4:30 pm**

Looking for Stevens T-181 Hub thread chasing tool

Posted: **Thu Sep 17, 2020 5:00 pm**

Is there any interest in a ‘26 block, bored 40 over with HC pistons. Also have machined crank and new rods with Babbitt. $300.

Posted: **Thu Sep 17, 2020 7:00 pm**

26 _27 wire wheels. Excellent shape primed ready to paint. Commercial drivers side front fender no rust .1 round and 1 oval gas tanks
Nice cool box with coils . Model a speedometer cable.4 dip pan complete

Posted: **Thu Sep 17, 2020 8:45 pm**

Jonah, I'd sell it for whatever the buyer wanted to offer for it.

Posted: **Fri Sep 18, 2020 3:22 pm**

Yes R.V. I would be interested.
Will you have a space there?
Greg

Posted: **Fri Sep 18, 2020 4:50 pm**

Yep. I'll be there next to my brother Jon and his Model T top and body wood.

Posted: **Sat Sep 19, 2020 1:01 pm**

Is there any intrest in a STAUDE Mak A Tractor. I have advertised it here before.
I can bring it to Luray but would like to NOT bring it home.

https://www.youtube.com/watch?v=SZYsAXQt1dA

Posted: **Wed Sep 23, 2020 6:32 pm**

Not selling, but looking to trade my coupe fenders Ford roadster or touring fenders. My want add is here: viewtopic.php?f=5&t=15847&p=120088#p120088

Posted: **Wed Sep 23, 2020 7:49 pm**

Rich, I have a small drum ruxtell shift lock that I could part with. I am not coming to Luray, to far at about 3000 miles

Posted: **Wed Sep 23, 2020 9:33 pm**

We will be there for sure the way it looks now. I already have 6 orders for NOS ignition parts for people with cars other than model Ts. So if you or a friend need something like distributor caps, points, rotors or brushes for other makes and models, email me at tsvanmeet@gmail.com with those needs. We will not be vending but I will deliver those parts already spoken for.

Posted: **Thu Sep 24, 2020 11:39 am**

If I’m lucky and sell a few big parts, I want to sell this trailer.
5X8 good tires, Pa. title in my name.
$850.00
Bob Giles
divco100b@icloud.com

Trailer has been sold, thanks mtfca

Posted: **Thu Sep 24, 2020 4:10 pm**

Bob, You need to fill the trailer back up with new goodies before you leave Luray !

Posted: **Thu Sep 24, 2020 4:33 pm**

I’m buying a bigger trailer.

Posted: **Thu Sep 24, 2020 8:41 pm**

Had a call today that a gentleman is bringing a barn fresh Dec 1910 touring to the Mid Atlantic Pre War Swap Meet In October for sale. Can’t wait to see it.

Posted: **Thu Sep 24, 2020 8:46 pm**

I'll be there with a couple rebuilt Model A engines ready to go. High compression Aluminum T heads in T plug and 14mm plug. High volume outside oil line kits and a whole trailer load of good used T and A parts.Kevin Prus 330-774-71thirty.

Posted: **Sun Sep 27, 2020 10:23 am**

Long range weather forecast is looking pretty decent right now

Posted: **Sun Sep 27, 2020 6:44 pm**

Karen and I will be there with a bunch of T stuff, including a restored KW coil box with 4 good coils, rebuilt Bosch front plate distributor complete, nice Kingston 4-ball, early original brass floor trim w/screws, assortment of T shackles, nice 13/14 steering column. Look for our new red EZ-Up. Looking forward to seeing everyone.

Posted: **Sun Sep 27, 2020 7:39 pm**

I believe these are Staude conversion wheels. They will need new bearings. I can deliver to Luray on Tuesday. Asking $450 for the pair.

Posted: **Mon Sep 28, 2020 12:20 pm**

Looks like I will be hunting for a 1911-18 straight spindle arm. I didn't notice the crack until after sandblasting this piece.

Rich C.

Posted: **Mon Sep 28, 2020 12:24 pm**

I have a bunch Rich - drop me a note through here.

Posted: **Mon Sep 28, 2020 1:22 pm**

Divcoone wrote: ↑
Thu Sep 17, 2020 5:00 pm
Is there any interest in a ‘26 block, bored 40 over with HC pistons. Also have machined crank and new rods with Babbitt. $300.

Bob, I sent you a PM on the 1926 Shortblock. - Matt

Posted: **Mon Sep 28, 2020 8:13 pm**

The recent change in the "Hershey" car show dates/location gives me a little more flexibility and I plan to be there with a couple tables of brass stuff. Will have some lamps, literature, a few Model T things and an assortment of interesting early automobilia including some early spark plugs.
Terry

Posted: **Mon Sep 28, 2020 8:21 pm**

Matt, I sent you a PM.

Posted: **Tue Sep 29, 2020 7:36 pm**

I will have For Sale, Model T Parts and the following:

- 1912 Model T Torpedo Runabout, "Southern Wide Track"', built late model year. Restoration in the 1950's with mostly correct parts and some incorrect.
Has a 1914 engine. Last run in the late 1960's. Still looks great and would be a nice fun car to drive.

- Nice 23/25 Frame.

- 1915 and 1916 Blocks.

- Engine with an early 1916 Block and Alum. Transmission Cover.

- 1933 Ford Glove Box Radio.

Thanks, Jim

Posted: **Wed Sep 30, 2020 11:16 am**

looking for set of complete wheels in good shape for my 1924.

Posted: **Wed Sep 30, 2020 2:24 pm**

In addition to all my other stuff, I will have a few of my rewound lifetime field coils, so bring your core and save a pile of shipping $$$. Also early and late Watts style clutches, and all my new items including the special early manifold studs with shoulder, the new early 2 pc dash clips and hardware, and other items. My brother has decided to bring a bunch of original parts besides his floorboards, body, and top wood, so stop by; there will be plenty of good parts there.

Posted: **Thu Oct 01, 2020 10:50 am**

Just loaded a working Weaver bumper jack.
Asking $250.
Bob Giles
divco100b@icloud.com

Posted: **Fri Oct 02, 2020 7:52 pm**

For now it looks like we are in for some fantastic fall weather here in Luray. Looking forward to seeing everyone. I will have a good assortment of Model T Parts. Windshields, engine blocks ,
transmission parts, wheels, gas tanks, front end and rearend parts. Some TT stuff and a 26 coupe.

Posted: **Sun Oct 04, 2020 6:24 pm**

I'm loading the back seat and trunk of my SS-396 Chevelle full of prewar car parts for the trip to Luray! Can't wait!

Posted: **Sun Oct 04, 2020 6:49 pm**

James, how can I recognize your booth?

Posted: **Mon Oct 05, 2020 5:04 am**

Jonah... you wont miss it. It will be the only space there with a blood-red 1968 SS Chevelle sitting right there in the swap space with my stuff..

Posted: **Mon Oct 05, 2020 5:54 am**

I will see you there tomorrow!

Posted: **Mon Oct 05, 2020 7:41 am**

Are youse setting up a trailer to take peoples stuff already priced and youse sell it for a price?

Posted: **Mon Oct 05, 2020 7:46 am**

Hi Richard,
Due to the logistics and the size of this meet we will not have our manned consignment table at this special event. We will consider it for our regular spring meet in May.
Thanks for asking

Posted: **Mon Oct 05, 2020 7:51 pm**

Here are some of the things I’ve got loaded up:

1914 block
1916 block
12 rivet rear axle with 2 piece torque tube
1914 windshield
1913-1914 column
Narrow nose pans
Aluminum hogs head
1917-25 rear fenders
1913 front fenders
Tapered leaf springs
Early over the axle wishbone front ends
E&J gas headlights and side lights
Carbide generator
New “Z” head
Waukesha Ricardo head

Posted: **Thu Oct 08, 2020 6:08 am**

Does anyone have any cotton bands?

MTFCA Forum

Luray Swap Meet, October 6-8 - What are you bringing to sell?

Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?