Drill Bit Quality
Posted: Sun Dec 13, 2020 10:11 pm
Yesterday 12/12, Ignacio Valdes started a post entitled "Drilling Steel?". Ignacio eventually solved his problem of difficulty in drilling steel, apparently by purchase of what was obviously a very high quality set of "Milwaukee" drill bits. Within that same post, Stan Howe posted what i consider some very valuable information concerning a brand of drill bits (Norseman) that he said are the best he's ever owned! I thought that such information was worthy of a this separate post. First of all, the Norseman brand is U.S.A. made, and I would assume that the Milwaukee brand must be U.S.A. made as well, as Ignacio indicated a huge difference in the performance with those drill bits.
The reason I thought to repeat in a separate post the information developed by Ignacio and Stan Howe is very worthy of a separate post, plus a little bit that I might add that I feel is important and appropriate here:
First of all, I brought up the web site of the Norseman Company that Stan mentioned, and it contains some very good information that talks about probably one of the most important things I actually learned (and actually RETAINED) from high school shop class in the 1950's! Mr. Murray, was extremely emphatic when he taught us how to purchase good quality drill bits. He said words to the effect that if you look at the information stamped into the shank of a drill bit, to ignore markings that might appear like, coated, or premium, magnum, tungsten, carbide, etc, etc, and if there was not an "HS" or an "HSS" stamped on the drill,,,,,"DON'T BUY IT!) That stands for "HIGH SPEED STEEL", which is the most important thing about the quality of a drill bit. And what I particularly noted on the Norseman website was that they also stressed the importance of "high speed steel", and I was particularly gratified to note that some things haven't changed in sixty plus years since my high school machine shop days! Anyway, FWIW, and thanks Ignacio & Stan for bringing this up, .....harold
The reason I thought to repeat in a separate post the information developed by Ignacio and Stan Howe is very worthy of a separate post, plus a little bit that I might add that I feel is important and appropriate here:
First of all, I brought up the web site of the Norseman Company that Stan mentioned, and it contains some very good information that talks about probably one of the most important things I actually learned (and actually RETAINED) from high school shop class in the 1950's! Mr. Murray, was extremely emphatic when he taught us how to purchase good quality drill bits. He said words to the effect that if you look at the information stamped into the shank of a drill bit, to ignore markings that might appear like, coated, or premium, magnum, tungsten, carbide, etc, etc, and if there was not an "HS" or an "HSS" stamped on the drill,,,,,"DON'T BUY IT!) That stands for "HIGH SPEED STEEL", which is the most important thing about the quality of a drill bit. And what I particularly noted on the Norseman website was that they also stressed the importance of "high speed steel", and I was particularly gratified to note that some things haven't changed in sixty plus years since my high school machine shop days! Anyway, FWIW, and thanks Ignacio & Stan for bringing this up, .....harold
