Page 1 of 1
Where do these go?
Posted: Mon Jan 11, 2021 2:58 pm
by Mopar_man
Need some help with a screw set for a 26/7 touring. I bought a pack of interior trim screws at Carlisle a while back and I'm trying to figure out where they go. As far as I can tell the 7 circled in blue are for the dashboard to the cow. The ones circled in orange were ordered from Lang's and Are for the switch plate. I'm thinking that the ones in green are for the switch plate as well (they came in the kit) but they seem a bit bigger. The two circled in red I'm not sure. Any suggestions? Do the dash screws have to have cup washers just under the screw head?
Here is the packaging.
Re: Where do these go?
Posted: Mon Jan 11, 2021 3:10 pm
by AndreFordT
This are the screws and nuts that fix the dash to the body.
7 are needed
Andre
Belgium
Re: Where do these go?
Posted: Mon Jan 11, 2021 3:25 pm
by Mopar_man
Any Idea about the ones in Red?
Re: Where do these go?
Posted: Mon Jan 11, 2021 3:33 pm
by doodlebugt
Column clamp.
Bruce
(Are they originally shorter?)
Re: Where do these go?
Posted: Mon Jan 11, 2021 4:34 pm
by Mopar_man
Thanks that makes sense.
Re: Where do these go?
Posted: Mon Jan 11, 2021 5:25 pm
by DanTreace
Green and Red ones for the column clamp.
- 100_3075 - Copy (2) (600x487) (598x485).jpg (113.58 KiB) Viewed 2469 times
Re: Where do these go?
Posted: Mon Jan 11, 2021 5:55 pm
by varmint
I have yet to purchase some. Should they be oval or flat head?
Re: Where do these go?
Posted: Mon Jan 11, 2021 5:59 pm
by George House
Column clamp ?.. oval
Re: Where do these go?
Posted: Mon Jan 11, 2021 7:59 pm
by DanTreace
All are single slot, oval head, nickel plated. Except Canada, those are Robersons. 
Stainless look like nickel when polished and won't nickel tarnish
Re: Where do these go?
Posted: Mon Jan 11, 2021 11:15 pm
by Mopar_man
Thanks everyone. This helps. now I see where they all go.