MTFCA Forum

Does anyone have a contact or source for someone who re-builds or restores horns. Would like to get mine working again, any input would be great.

Scott,

I don't know the man but several years ago I read an article about 6 vt. horns from Sam Bonar out of KY. I believe his # is 8 five 9 four 7 two 2 three one 5.

You may want to reach out to him.

Best of luck,
Dom

If it is a Klaxon, they are pretty easy to repair, unless water got in and rusted the parts. If it looks good inside and the commutator windings are still good, a little oil in the bushings and adjustment of the diaphragm and you are good to go. Jim Patrick