Miller head update

Model T Tom · Post by **Model T Tom** » Mon Jan 18, 2021 1:09 pm

Went to Detroit and pulled the head. Pattern maker came over and did his magic . Full steam ahead. I tried to down load picture but wont let me. I'll try later

Kevin Pharis · Post by **Kevin Pharis** » Mon Jan 18, 2021 2:25 pm

Great news Tom!

I ran into picture posting issues for the first time yesterday too... said my pics were too big...?! Haven’t had this issue since the old format. The site wants the pics in landscape orientation... I simply rotated my pics, and they loaded fine

ModelTWoods · Post by **ModelTWoods** » Mon Jan 18, 2021 10:34 pm

Within the last week, I tried to post a picture but it said it was too big. I resized it (smaller) using the 'paint' feature on my computer. Works every time.

Model T Tom · Post by **Model T Tom** » Tue Jan 19, 2021 12:38 am

Picture. I'll know compression ratio soon.

Post by **kmatt2** » Tue Jan 19, 2021 1:22 am

What do your pistion tops look like, are they stock Model T shape tops or something different ? From the picture the combustion chamber looks hemispheric with no swish area and the valve area looks like it is for stockish size and lift valves.

Model T Tom · Post by **Model T Tom** » Tue Jan 19, 2021 4:42 am

The engine the head is on is stock pistons and cam. I don't think high compression pistons will work. Higher lift cam might work. There might be different compression ratios made. I'll wait and see after the first one is made and tested.

Model T Tom · Post by **Model T Tom** » Tue Jan 19, 2021 4:50 am

Basic head so far

MTFCA Forum

Miller head update

Miller head update

Re: Miller head update

Re: Miller head update

Re: Miller head update

Re: Miller head update

Re: Miller head update

Re: Miller head update