Page 1 of 1
Miller head update
Posted: Mon Jan 18, 2021 1:09 pm
by Model T Tom
Went to Detroit and pulled the head. Pattern maker came over and did his magic . Full steam ahead. I tried to down load picture but wont let me. I'll try later
Re: Miller head update
Posted: Mon Jan 18, 2021 2:25 pm
by Kevin Pharis
Great news Tom!
I ran into picture posting issues for the first time yesterday too... said my pics were too big...?! Haven’t had this issue since the old format. The site wants the pics in landscape orientation... I simply rotated my pics, and they loaded fine
Re: Miller head update
Posted: Mon Jan 18, 2021 10:34 pm
by ModelTWoods
Within the last week, I tried to post a picture but it said it was too big. I resized it (smaller) using the 'paint' feature on my computer. Works every time.
Re: Miller head update
Posted: Tue Jan 19, 2021 12:38 am
by Model T Tom
Picture. I'll know compression ratio soon.
Re: Miller head update
Posted: Tue Jan 19, 2021 1:22 am
by kmatt2
What do your pistion tops look like, are they stock Model T shape tops or something different ? From the picture the combustion chamber looks hemispheric with no swish area and the valve area looks like it is for stockish size and lift valves.
Re: Miller head update
Posted: Tue Jan 19, 2021 4:42 am
by Model T Tom
The engine the head is on is stock pistons and cam. I don't think high compression pistons will work. Higher lift cam might work. There might be different compression ratios made. I'll wait and see after the first one is made and tested.
Re: Miller head update
Posted: Tue Jan 19, 2021 4:50 am
by Model T Tom
Basic head so far