If anyone would happen to have a pinion gear close at hand, I am looking for a couple of dimensions/measurements. Basically I am looking for the overall width/diameter of the gear (widest point) and the overall height of the gear. There is a 300+ mile difference between myself and certain spare parts and this is one of them and I need these dimensions for a project that I am working on for the Spring. Thank you for your time and help, it is appreciated.
Photo stolen from the internet without permission.
Pinion gear dimensions needed.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 519
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Pinion gear dimensions needed.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
- Posts: 148
- Joined: Sun Jan 06, 2019 5:50 pm
- First Name: Randall
- Last Name: Strickland
- Location: lambsburg va
Re: Pinion gear dimensions needed.
11 tooth 2.558.
1.100 y’all
Hi speed pinion larger in diameter
1.100 y’all
Hi speed pinion larger in diameter
-
Topic author - Posts: 519
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Pinion gear dimensions needed.
Thank you Randall, exactly what I needed.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.