Page 1 of 1
LF stromberg who contact for rebiuld
Posted: Sun Feb 07, 2021 12:03 pm
by Nv Bob
Have come across LF stromberg carb in my stash
Wanted see if anyone can recommend someone who can rebuild it for me
Thanks in advance
Re: LF stromberg who contact for rebiuld
Posted: Sun Feb 07, 2021 12:36 pm
by DHort
Russ Potter or Corey Walker or Bruce in Canada
Re: LF stromberg who contact for rebiuld
Posted: Sun Feb 07, 2021 3:31 pm
by W Austen
Re: LF stromberg who contact for rebiuld
Posted: Mon Feb 08, 2021 11:45 pm
by ModelTWoods
DHort wrote: ↑Sun Feb 07, 2021 12:36 pm
Russ Potter or Corey Walker or Bruce in Canada
Or Stan Howe in Montana. My experience is that Corey is probably the most reasonable of the four.
Re: LF stromberg who contact for rebiuld
Posted: Tue Feb 09, 2021 11:10 am
by StanHowe
Thanks for the referral but I am not currently taking in any repair work. Too backed up already.
Customers worldwide and they a wants theirs done..... so do I.
Re: LF stromberg who contact for rebiuld
Posted: Wed Feb 10, 2021 9:04 am
by Nv Bob
Anyone have contact info thanks Russell ibruce or corey
Re: LF stromberg who contact for rebiuld
Posted: Wed Feb 10, 2021 9:51 am
by Bruce Compton
Hi Bob : I prefer not to work on these as 99% have worn out pars that I can't fabricate. Stan' the man but too busy so check with Cory. Sorry : Bruce
Re: LF stromberg who contact for rebiuld
Posted: Fri Feb 12, 2021 10:17 pm
by Corey Walker
I’ve never worked much on Strombergs. I bought an LF a couple years ago to take apart and see what would entail, but I figured I’d clean it up and try it out first. I found it was missing one plug that made it run lean and pop, after fixing that I just ran it and never attempted to disassemble it completely.