Change to stamped running board arms

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Les Schubert
Posts: 1357
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
* REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
Location: Calgary

Change to stamped running board arms

Post by Les Schubert » Sat Feb 13, 2021 8:59 pm

I am going to build a Canadian 21 T roadster and I have a couple of frames to choose from!!
I would like to pick the correct one!
I have gone to some effort to get the correct windshield and top irons for this car.
So I need to keep making the right choices.


Kerry
Posts: 1447
Joined: Mon Jan 07, 2019 2:42 pm
First Name: Frank
Last Name: van Ekeren
* REQUIRED* Type and Year of Model Ts owned: 1916 touring, 1916 pick-up, 1924 coupe, 1926 touring, 1927 touring
Location: Rosedale Vic Australia

Re: Change to stamped running board arms

Post by Kerry » Sat Feb 13, 2021 10:19 pm

Could be a tricky one for you. So going by the USA parts book, they changed in 1921 but over seas edition (Ontario) running board
+ truss rods still listed to 1922.


Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Change to stamped running board arms

Post by Allan » Sun Feb 14, 2021 4:18 am

Les, our car are Canadian sourced. One member of our club has a 1921 tourer, restored from an original car by a family of renowned car restorers. It has a chassis with forged running board brackets.

Allan from down under.


Topic author
Les Schubert
Posts: 1357
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
* REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
Location: Calgary

Re: Change to stamped running board arms

Post by Les Schubert » Sun Feb 14, 2021 9:48 am

Thank you for the information. Fortunately I I have both frames so I will use the one with the forged arms

Post Reply Previous topicNext topic