Source forHardware for wood pickup bed.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 387
- Joined: Sun Jan 06, 2019 7:19 pm
- First Name: Jack
- Last Name: Putnam
- Location: Bluffton, Ohio
- MTFCA Number: 13833
- MTFCI Number: 13353
Source forHardware for wood pickup bed.
Where can I buy the hardware for a Model T wood pickup bed? I have the wood, I need hardware.
Last edited by Jack Putnam, in Ohio on Wed May 12, 2021 7:47 pm, edited 1 time in total.
-
- Posts: 4967
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Source forHardware for wood pickup bed.
You might check with Lang's to see if they can supply just the hardware.
https://www.modeltford.com/item/PU-BED.aspx
https://www.modeltford.com/item/PU-BED.aspx
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Source forHardware for wood pickup bed.
https://www.hansenwheel.com/chuck-wagon-components/
Hansenwheel.com
Mark
I have a new wood bed I just finished and going another route. I found a metal bed so the wood bed is up for sale.
Mine is narrow early bed, not 26/27
Hansenwheel.com
Mark
I have a new wood bed I just finished and going another route. I found a metal bed so the wood bed is up for sale.
Mine is narrow early bed, not 26/27
-
- Posts: 3327
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
- Location: North Central FL
- MTFCA Number: 4838
- MTFCI Number: 115
- Board Member Since: 2000
- Contact:
Re: Source forHardware for wood pickup bed.
Danny
Thanks for that link to those wagon parts. Took a look and like the forged draw strap supports, and end braces, would work great on a bed.
Thanks for that link to those wagon parts. Took a look and like the forged draw strap supports, and end braces, would work great on a bed.
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
- Posts: 547
- Joined: Sun Jan 06, 2019 4:40 pm
- First Name: Andrew
- Last Name: Blaydon
- * REQUIRED* Type and Year of Model Ts owned: 1915 Cut-down touring
- Location: Middletown
- Board Member Since: 2018
Re: Source forHardware for wood pickup bed.
I used an old late 1800s Indiana farm wagon that had rotted for the last time. Salvaged hardware worked well for me, and was all old hand forged stuff to boot!