Page 1 of 1
26 model tt truck seat
Posted: Wed Aug 11, 2021 8:29 pm
by jhislop10@gmail.com
help can someone show me a picture of what the support for my truck seat should be. i have the original springs, but all there is to support the springs is the netal frame around the front, but at the back there is just a 1 inch thick by 4 inch wide board that is attached to the cab with 2 hindges.
john
Re: 26 model tt truck seat
Posted: Thu Aug 12, 2021 2:13 am
by Jeepbone1
Is it a closed cab or C cab? Here’s what the closed cab seat frame looks like.
Brad
Re: 26 model tt truck seat
Posted: Thu Aug 12, 2021 9:21 am
by jhislop10@gmail.com
great picture thanks
Re: 26 model tt truck seat
Posted: Fri Aug 13, 2021 10:16 am
by ModelTMark
There should be wood completely under the seat springs but not attached to the springs. I have a C-Cab and I used plywood. I believe it's hinged so you can lift it up and get to the back storage area.
R/Mark
Re: 26 model tt truck seat
Posted: Sat Aug 14, 2021 6:52 pm
by One390
If you have the board and hinges- that is bonus, as they seem to be gone most of the time. The board and hinges are for the tool box lid under the seat.