Snap-on T
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Snap-on T
I bought this little model awhile back and there was a picture that came with it supposed to be the original. Has anyone ever seen this truck? Maybe lost to time? Or a photo shop picture?
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 6443
- Joined: Sun Feb 14, 2021 10:08 pm
- First Name: Pat
- Last Name: McNallen
- * REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
- Location: Graham, Texas
- MTFCA Number: 51486
- Board Member Since: 2021
Re: Snap-on T
We still had a SnapOn man here until a few years ago.
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
Ours visits the farm every Tuesday. Quality tools for mucho money
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 6495
- Joined: Fri Jan 04, 2019 9:37 pm
- First Name: Steve
- Last Name: Jelf
- * REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
- Location: Parkerfield, Kansas
- MTFCA Number: 16175
- MTFCI Number: 14758
- Board Member Since: 2007
- Contact:
Re: Snap-on T
Snap-on was founded as the Snap-on Wrench Company in Milwaukee, Wisconsin in 1920 by Joseph Johnson and William Seidemann. I would say the photo is legit.
The inevitable often happens.
1915 Runabout
1923 Touring
1915 Runabout
1923 Touring
-
- Posts: 4094
- Joined: Tue Jan 08, 2019 1:39 pm
- First Name: Norman
- Last Name: Kling
- Location: Alpine California
Re: Snap-on T
I have a few snap on tools. When I was in high school, I worked in my spare time in a garage. The Snap On tool man would come around from time to time and the employees would trade in other tools for new Snap on. I would buy the used tools for a low price, so my older tools are a mixed variety of brands, among which are even some Snap On.
Norm
Norm
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Snap-on T
One of the National Tours about 10(?) years ago took us to one of their manufacturing plants and they had one of those (real) vehicles on display. It was an enjoyable day. Never saw so many wrenches in my life that day.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 65
- Joined: Thu Jan 17, 2019 6:55 pm
- First Name: James
- Last Name: Rodell
- Location: Kewaskum
- MTFCA Number: 14035
- MTFCI Number: 13594
Re: Snap-on T
The Snap-On Museum in Kenosha, Wisconsin has the truck on display. The Dairyland Tin Lizzies visited the museum after a business meeting years ago.
The museum has a website and you may take a virtual tour.
The museum has a website and you may take a virtual tour.
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Snap-on T
James, now that I think of it, I believe I saw it in MN on a tour and that the factory had the vehicle brought in for our viewing...what you say makes perfect sense with what I recall. The vehicle is a very well done example and they are proud of it.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 65
- Joined: Thu Jan 17, 2019 6:55 pm
- First Name: James
- Last Name: Rodell
- Location: Kewaskum
- MTFCA Number: 14035
- MTFCI Number: 13594
Re: Snap-on T
The truck is a faithful recreation. When Keith Gumbinger sees this post he will have more information on the truck, as he assisted the president of Snap On with the project.
-
- Posts: 2345
- Joined: Sun Jan 06, 2019 11:25 am
- First Name: Dave
- Last Name: Hanlon
- * REQUIRED* Type and Year of Model Ts owned: 24 Touring car
- Location: NE Ohio
- MTFCA Number: 50191
- Board Member Since: 2018
Re: Snap-on T
I have mostly Snap-on sockets and some hand tools. I even owe them a few dollars, but haven’t seen my dealer in a few years.
I need to drop off some to my buddy that has a dealer regularly to replace a few broken pieces.
Pricey yes, but by far the longest lasting, especially when you use them every day.
I have seen this truck before....
Mine has no drawers in the back, but it’s a bank.
I need to drop off some to my buddy that has a dealer regularly to replace a few broken pieces.
Pricey yes, but by far the longest lasting, especially when you use them every day.
I have seen this truck before....
Mine has no drawers in the back, but it’s a bank.
-
- Posts: 161
- Joined: Sun Jan 06, 2019 1:53 pm
- First Name: Warren
- Last Name: Webb
- Location: Owasso OK
Re: Snap-on T
The old time wrenchers had a saying ""Snap on fall off""
-
- Posts: 5456
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: Snap-on T
On ebay https://www.ebay.com/itm/175035946752?h ... Sw7sFhhBM7
New in Box
New in Box
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 302
- Joined: Sun Jan 06, 2019 2:24 pm
- First Name: Bill
- Last Name: Robinson
- * REQUIRED* Type and Year of Model Ts owned: '21 Depot Hack, '25 Touring Car, '26 Roadster Pickup, '27 Tudor, & another '27 Tudor
- Location: Salty Bottom, ALABAMA AL
- MTFCA Number: 22487
- MTFCI Number: 17887
- Board Member Since: 1999
- Contact:
Re: Snap-on T
Scott- I remember that tour- the stop at Snap-on was very memorable. The tour was out of Johnson City TN in 2009.
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Snap-on T
Bill...THANKS!
darn if I could remember!
My dad lives in Jonesborough...one of the stops...It was his/my first-ever National tour and after 25 years of buzzing around in his T we made only the first 7 miles and lost a rod...the remainder of the tour was as forlorn guests in a series of T's and one "A".
thanks again for clearing that up for me
darn if I could remember!
My dad lives in Jonesborough...one of the stops...It was his/my first-ever National tour and after 25 years of buzzing around in his T we made only the first 7 miles and lost a rod...the remainder of the tour was as forlorn guests in a series of T's and one "A".
thanks again for clearing that up for me
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 302
- Joined: Sun Jan 06, 2019 2:24 pm
- First Name: Bill
- Last Name: Robinson
- * REQUIRED* Type and Year of Model Ts owned: '21 Depot Hack, '25 Touring Car, '26 Roadster Pickup, '27 Tudor, & another '27 Tudor
- Location: Salty Bottom, ALABAMA AL
- MTFCA Number: 22487
- MTFCI Number: 17887
- Board Member Since: 1999
- Contact:
Re: Snap-on T
While riding on a gravel road, along a ridge, I had a manifold nut crack and I lost my whole tail pipe, which ended up getting runover by the car behind me. luckily Smith & Jones had a parts trailer parked at the motel. They had one of the new stainless exhaust pipes with a stainless muffler. I strongly remember Charlie Owen (deceased) and I in the motel parking lot that night installing it on my '25 touring car. Great memory with a great fellow.
-
- Posts: 1959
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Snap-on T
Belongs to a friend of mine in Michigan. His brother did the work a few years ago but was an early victim of covid.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
Iam glad to see real examples! Well done MTFCA
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 663
- Joined: Thu Jan 03, 2019 3:00 pm
- First Name: Keith
- Last Name: Gumbinger
- * REQUIRED* Type and Year of Model Ts owned: '14 Touring, '26 RPU, '27 Fordor, '27 Touring
- Location: Kenosha, WI
- MTFCA Number: 4661
- MTFCA Life Member: YES
- MTFCI Number: 6866
- Board Member Since: 1999
Re: Snap-on T
The Snap - On re-created Model T is now on display in the Museum at the Snap - On World Headquarters in Kenosha, WI.
I worked with Jack Michaels who was then President and Chairman of the Board of Directors of Snap - On to identify and purchase a '23 T Roadster like the original picture posted above in this thread by Bryant. Jack bought this car and had it professionally restored to be almost an exact match for the car pictured in the vintage picture above. Jack is about 6'5" tall and hardly fits in this T, so I drove the car for him several times. I must say it is the smoothest running T I have ever driven.
I mentioned to Jack that the T club national tour was going to be in Johnson City, TN that year and that they were going to visit the Snap - On factory there during the tour. He immediately said that he would have this T taken there for display during the tour, which he did. A picture of the T on display there is posted above in this thread.
I have since pickled the engine in this T and removed the battery. Snap - On has mounted the T on a specially made pallet so it can be moved easily when they take it to dealer shows, etc.
It was a pleasure working with Jack Michaels and Snap - On on this T project. Jack is a car guy just like all of us are, maybe more so. There is more to this story of course, but that's for another time.
Keith
I worked with Jack Michaels who was then President and Chairman of the Board of Directors of Snap - On to identify and purchase a '23 T Roadster like the original picture posted above in this thread by Bryant. Jack bought this car and had it professionally restored to be almost an exact match for the car pictured in the vintage picture above. Jack is about 6'5" tall and hardly fits in this T, so I drove the car for him several times. I must say it is the smoothest running T I have ever driven.
I mentioned to Jack that the T club national tour was going to be in Johnson City, TN that year and that they were going to visit the Snap - On factory there during the tour. He immediately said that he would have this T taken there for display during the tour, which he did. A picture of the T on display there is posted above in this thread.
I have since pickled the engine in this T and removed the battery. Snap - On has mounted the T on a specially made pallet so it can be moved easily when they take it to dealer shows, etc.
It was a pleasure working with Jack Michaels and Snap - On on this T project. Jack is a car guy just like all of us are, maybe more so. There is more to this story of course, but that's for another time.
Keith
'14 Touring, '26 Roadster Pickup, '27 Fordor, '27 Touring
Motto: It's hard to build a garage that's tooooo big!
Motto: It's hard to build a garage that's tooooo big!
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: Snap-on T
Here is a Snap-On tool cabinet that my uncle gave me several years ago. It came out of an old garage in Yale Oklahoma. It is of the T era, and probably was delivered in a model T. Snap-On told me it was one of the earliest of their dealer cabinets from aprox 1921 to 1922 era. They also said that the photo on the door was their entire product line at that time. I think I may have the only one left. I have never seen another one anywhere and the tool collector forums have never seen it either. When I contacted Snap-On, they said they do not have one. They offered me choice of any tool box they have for it. That was at least 10 years ago. Glad I kept it.
-
- Posts: 302
- Joined: Sun Jan 06, 2019 2:24 pm
- First Name: Bill
- Last Name: Robinson
- * REQUIRED* Type and Year of Model Ts owned: '21 Depot Hack, '25 Touring Car, '26 Roadster Pickup, '27 Tudor, & another '27 Tudor
- Location: Salty Bottom, ALABAMA AL
- MTFCA Number: 22487
- MTFCI Number: 17887
- Board Member Since: 1999
- Contact:
Re: Snap-on T
Keith- it's been 12+ years since that Johnson City tour and I'm just now finding out the details of that truck on display in front of the Snap-on tool factory. All of these years I've thought about the truck on display in the rain, snow, wind, and drive by hoodlums, and only now are we finding out that the truck was brought here JUST FOR US! A belated thanks to you and Snap-on!
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
I’d have to say that brings a tear to my eye 🥲 it’s so beautiful! Well done sir
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 54
- Joined: Thu Jan 10, 2019 5:10 pm
- First Name: Dean
- Last Name: Kiefer
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1926 Snowmobile, 1926 Wrecker
- Location: Adams, MN
- MTFCA Number: 16653
- MTFCI Number: 15244
- Board Member Since: 2015
Re: Snap-on T
A lot of Snap-On tools have a little marking symbol on them to determine the year they were made. The Snap-On truck has the chart in it to compare markings for the year of your tool. I don’t know what year they started or when if they quit doing it.
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
Possible these little markings? 4 different ratchets I’ve bought in the past 5 years.
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 54
- Joined: Thu Jan 10, 2019 5:10 pm
- First Name: Dean
- Last Name: Kiefer
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1926 Snowmobile, 1926 Wrecker
- Location: Adams, MN
- MTFCA Number: 16653
- MTFCI Number: 15244
- Board Member Since: 2015
Re: Snap-on T
Yes, those are the markings. Each year was a little different. Take them with you or the picture when you stop at the Snap-On truck and he will show you the years they were made.
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
I will ask him Tuesday we he comes by. I asked him if he had any tools to do specialty things on model T’s before but he said not to his knowledge. Makes me wonder if they ever made specialty tools for them? Iam sure if they did someone here will know.
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 663
- Joined: Thu Jan 03, 2019 3:00 pm
- First Name: Keith
- Last Name: Gumbinger
- * REQUIRED* Type and Year of Model Ts owned: '14 Touring, '26 RPU, '27 Fordor, '27 Touring
- Location: Kenosha, WI
- MTFCA Number: 4661
- MTFCA Life Member: YES
- MTFCI Number: 6866
- Board Member Since: 1999
Re: Snap-on T
Snap - On did in fact make a special tool kit for Model T's, and it was in the early '20's. It said that it had a wrench for every size nut or bolt in T's, and it came in a special tin tool box that said something like "All the tools you need for your Ford" on the lid.
A few years ago, my friend, Jim Rodell Sr. found an ad for this tool kit in an old Ford Owner and Dealer magazine. He found one of these tool kits, & bought it. It is now on display in the Snap - On Museum near the recreated Snap - On Model T Salesman's car pictured above in this thread. I don't have a picture with me but maybe Jim will read this and post a picture.
Also, while Snap - On made this tool kit for Model T's, they also made one for (please don't crucify me) Chevrolet, aka, brand X.
Snap - On is very interested in their history and the manager of their Museum goes out of her way to get artifacts like these and the stories behind them for their museum.
Keith
A few years ago, my friend, Jim Rodell Sr. found an ad for this tool kit in an old Ford Owner and Dealer magazine. He found one of these tool kits, & bought it. It is now on display in the Snap - On Museum near the recreated Snap - On Model T Salesman's car pictured above in this thread. I don't have a picture with me but maybe Jim will read this and post a picture.
Also, while Snap - On made this tool kit for Model T's, they also made one for (please don't crucify me) Chevrolet, aka, brand X.
Snap - On is very interested in their history and the manager of their Museum goes out of her way to get artifacts like these and the stories behind them for their museum.
Keith
'14 Touring, '26 Roadster Pickup, '27 Fordor, '27 Touring
Motto: It's hard to build a garage that's tooooo big!
Motto: It's hard to build a garage that's tooooo big!
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
It’s ok the Chevrolet brothers were Ford men!
I would love to see the model t snap-on kit. We could all petition them to make to modern equivalent of all the specialty tools maybe
I would love to see the model t snap-on kit. We could all petition them to make to modern equivalent of all the specialty tools maybe
“Whether you think you can, or think you can’t-you’re right.”
-
- Posts: 60
- Joined: Tue Jan 08, 2019 11:33 am
- First Name: Lyndon
- Last Name: Moore
- * REQUIRED* Type and Year of Model Ts owned: 8
- Location: Bloomfield Missouri
- MTFCA Number: 27876
- Board Member Since: 2018
Re: Snap-on T
I posted a few years ago pictures of the set that I think you are wanting to see. I am no good at pulling up old posts. I tried searching my old posts, but did not see it. Some of you guys are great at finding old posts. Maybe one of you will see this and find it to post it here. I have a large collection of the early Snap-On sets. Their vacuum grip pliers and the Bluepoints screwdriver and wrenches. 'The early had the "S" at the end of the Bluepoint name. The Bluepoints tools had two arrowheads on them. And I have most all of their early catalogs. The early catalogs are in alphabet order. The first catalog was "A" in 1923. They made a repop of their first catalog in 1985. I also have a couple of the early hats the early dealers wore. Snap-on did not put dated codes on their tools until 1927. Then in the 40's, during the war, they put "E" for emergency and "G" for government. The most common early socket for Model T's was the Camshaft socket. They also offered T handles that the socket did not snap on, just like the Walden Worchester. These were offered in sets for car dealers. They are hard to find.
-
- Posts: 36
- Joined: Sun Jan 06, 2019 2:37 pm
- First Name: Peter
- Last Name: Nikolajevs
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring, 1927 Tudor Sedan
- Location: Dearborn
- MTFCA Number: 393
- MTFCA Life Member: YES
- Contact:
Re: Snap-on T
I think I found the post.
http://www.mtfca.com/discus/messages/82 ... 1534016061
I used Google and searched MTFCA Lyndon and Snap.
http://www.mtfca.com/discus/messages/82 ... 1534016061
I used Google and searched MTFCA Lyndon and Snap.
Peter N
-
- Posts: 5256
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Snap-on T
I have accumulated some 1/2" drive Snap-on sockets from various sources. They are all 8 point items I use on square coach bolt nuts. The last one cost me US$10 on fleabay. It fits the nuts used on 3/8" bolts.
By far the best tool of theirs that I have is a speedbrace to drive such sockets, and wheel nuts on moderns. It has a swiveling drive end which allows the handle to be cranked sideways, giving a breaker bar some 15" long. My now disabled elder son bought it second hand somewhere, and as he can no longer do any work, it is a sentimental favourite as well.
Allan from down under.
By far the best tool of theirs that I have is a speedbrace to drive such sockets, and wheel nuts on moderns. It has a swiveling drive end which allows the handle to be cranked sideways, giving a breaker bar some 15" long. My now disabled elder son bought it second hand somewhere, and as he can no longer do any work, it is a sentimental favourite as well.
Allan from down under.
-
- Posts: 662
- Joined: Mon Jan 07, 2019 10:06 pm
- First Name: Ed
- Last Name: Fuller
- Location: NJ
- MTFCA Number: 29582
- MTFCI Number: 22818
- Board Member Since: 2012
Re: Snap-on T
I finally remembered to dig this out of my toolbox at work. Got it from my local Snap On guy years ago. Shows how to date old tools from the markings.
-
Topic author - Posts: 1039
- Joined: Sat Sep 11, 2021 3:11 pm
- First Name: bryant
- Last Name: shafer
- * REQUIRED* Type and Year of Model Ts owned: 1926 tudor
- Location: myersville maryland
- MTFCA Number: 51736
- Board Member Since: 2021
Re: Snap-on T
Looks like Egyptian hieroglyphics! Nice info
“Whether you think you can, or think you can’t-you’re right.”