Page 1 of 1
Atwater/Kent replacement rotor and cap
Posted: Sun Jun 12, 2022 9:55 am
by JvanMaanen
I have an Atwater/Kent front plate with a type RA distributor head. I am thinking about using this on my 19 roadster project, but before I do would like to know if there is a source of replacement rotors and caps for the Atwater/Kent units. My parts are in good shape, but would be nice to have spares for the tool box.
Thanks Van
Re: Atwater/Kent replacement rotor and cap
Posted: Sun Jun 12, 2022 10:41 am
by RajoRacer
I believe Tom Van Meterhorn (sp) carries vintage ignition parts - he posts here once in a while.
Re: Atwater/Kent replacement rotor and cap
Posted: Sun Jun 12, 2022 10:47 am
by Gene_French
Tom is an excellent source for vintage ignition parts and info ... well recommended Steve ... always an optimist ...Gene French
Re: Atwater/Kent replacement rotor and cap
Posted: Sun Jun 12, 2022 12:09 pm
by ModelTWoods
I had some for the type LA clip on Atwater Kent, The problem would be finding them. Due to them being 140 miles away (one way), gas prices, and COVID, I don't know when I'd lay my hands on them.
Re: Atwater/Kent replacement rotor and cap
Posted: Sun Jun 12, 2022 12:35 pm
by JvanMaanen
Thanks Steve and Gene, I'll give Tom a shout and see what he has.
Van
Re: Atwater/Kent replacement rotor and cap
Posted: Mon Jun 13, 2022 11:30 am
by JvanMaanen
FYI for anyone needing Atwater/Kent spares. Tom has NOS cap, rotor and point set