MTFCA Forum

Hey guys, can anyone tell me that the bolt size is for the 4 bolts that bolt the torque tube to the hogshead are please? 1926 Model T coupe.

Thanks,

Hi Shawn, we have bolt charts available on the site: https://mtfca.com/phpBB3/app.php/gallery/album/195 which will give you most bolt (and nut) sizes.

The one you want is: https://mtfca.com/phpBB3/app.php/gallery/image/1501

and you are looking for a 3/8" UNF 13/16" long

This may be of interest as well:
https://mtfca.com/phpBB3/app.php/gallery/image/1604 and https://mtfca.com/phpBB3/app.php/gallery/image/1784

3/8 x 24 tpi, same as engine to pan bolts.
The holes in the pan are tapped for 24 tpi. Check it out

The two bottom ones are shorter, threading directly into the pan. The two upper ones are a bit longer, going through the holes in the hogshead and then getting castle nuts and cotter pins (although a lot of people shortcut with lock washers?).
I don't recall the actual lengths (pretty easy to figure what fits best?).

Thanks everyone that really helped. I bagged and tagged everything but I can't find these ones. I'm sure they are somewhere safe.