Page 1 of 1

How long were replacement blocks made?

Posted: Mon Oct 31, 2022 11:49 am
by Steve Jelf
We know that the last Model T engines were made in August, 1941. But what about replacement blocks? Were the last blocks made then,or earlier, or later? I don't recall ever seeing any information on that.

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 11:51 am
by TWrenn
I thought those WERE the replacement blocks? Maybe not? Guess we'll both learn sumptin purty quick!

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 1:16 pm
by Steve Jelf
No, they were complete engines, serial numbers 15,176,882 through 15,176,888. Replacement blocks were not numbered.

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 1:38 pm
by 2nighthawks
Sis (6) engines only? Somehow, that doesn't sound logical,....???

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 1:50 pm
by John kuehn

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 6:42 pm
by John kuehn
Here is a 1926 Western Auto car parts catalog. They had lots of T parts including T blocks. The question would be are they “genuine Ford parts” or aftermarket. Maybe they had a deal with Ford to sell their parts? Any answers?
I’ve read and heard Western Auto had engine blocks but who made them.

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 6:53 pm
by sweet23
If the replacement blocks were not numbered, and just considered a service part, There may be no record of how many were produced or when the last of them were made. Darryl

Re: How long were replacement blocks made?

Posted: Mon Oct 31, 2022 7:54 pm
by John kuehn
I’ve thought somthing similar. Most probably the larger Ford dealerships had replacement blocks that didn’t get sold along with other Ford parts at the end of 1927 and on. The replacement blocks weren’t numbered. Same goes for Western Auto and other large non-Ford parts houses. I’m just guessing but it’s probably close to correct. 🤔

Re: How long were replacement blocks made?

Posted: Fri Nov 04, 2022 12:39 am
by Manuel
What about Canada, did they make replacement blocks? And how long for?

Manuel in Oz

Re: How long were replacement blocks made?

Posted: Fri Nov 04, 2022 8:38 am
by ModelT46
In 1949 I bought a new block from a Ford dealer and used it in a 1925 T.

Re: How long were replacement blocks made?

Posted: Fri Nov 04, 2022 10:45 am
by Ken Buhler
This is one of my blocks, it has a high serial number. Was it made in 1931? It shows 5 31 E.
IMG_4702.jpg

Re: How long were replacement blocks made?

Posted: Fri Nov 04, 2022 1:17 pm
by Steve Jelf
From what I see in the Encyclopedia I think the Canadian number 748553 would be July or August 1927. Most Canadian numbers begin with C, but some have the SC or HC prefix, and some have no letter at all. The E means 1927, so apparently the block was cast at the end of May and assembled as an engine in July, or Maybe August. I don't know if Canadian engine production continued after 1927, as it did in Detroit.