Guys,
Richard Gould wrote up an article for the Early Ford Registry newsletter about 10 + years ago that gave some tips for assembling a Brass Windshield from Speedway motors. It was helpful in describing how to make the slugs as those provided by Speedway are the wrong size, and how to fashion the end caps from those sold by the parts houses. I already contacted Richard and unfortunately he cannot gain access to the original article he wrote, nor can it be found on the Early Ford website. He said he emailed a copy of it to a few guys on the forum but doesn't remember who. So I'm reaching out to anyone here that might have a copy of the article if you would be so kind as to help me out.
Thanks guys
Brass Windshield Assembly Modification Instructions Needed
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules