Is this overkill?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Is this overkill?

Post by browning » Sun Dec 04, 2022 4:08 pm

Timing device
Attachments
FDAAD09C-70C0-4D64-B5EC-1C88A001DC8C.jpeg


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 4:12 pm

...your title: yeah, pretty much ;)
Last edited by Scott_Conger on Sun Dec 04, 2022 4:16 pm, edited 1 time in total.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured

User avatar

mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Is this overkill?

Post by mbowen » Sun Dec 04, 2022 4:15 pm

How does piston movement get transferred to the indicator?
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Is this overkill?

Post by Dan Hatch » Sun Dec 04, 2022 4:22 pm

Here is the old school way from back in the day.
26D5AEB2-D0C0-4075-BF6B-001EA520D336.jpeg

User avatar

Tourabout
Posts: 252
Joined: Sun Jan 06, 2019 4:31 pm
First Name: Robbie
Last Name: Price
Location: Cleveland

Re: Is this overkill?

Post by Tourabout » Sun Dec 04, 2022 4:33 pm

Looks like the shaft the indicator is mounted to rises up and down with the piston.

User avatar

mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Is this overkill?

Post by mbowen » Sun Dec 04, 2022 4:35 pm

Tourabout wrote:
Sun Dec 04, 2022 4:33 pm
Looks like the shaft the indicator is mounted to rises up and down with the piston.
… except that the piston isn’t straight under the spark plug hole…
54B2F5B0-1407-4939-AF56-34ACC046128E.jpeg
54B2F5B0-1407-4939-AF56-34ACC046128E.jpeg (122.79 KiB) Viewed 2421 times
Last edited by mbowen on Sun Dec 04, 2022 4:46 pm, edited 1 time in total.
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 4:40 pm

use some imagination, Miles ;) :D
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


greenacres36
Posts: 134
Joined: Sun Sep 27, 2020 3:50 pm
First Name: Brian
Last Name: Williams
* REQUIRED* Type and Year of Model Ts owned: 1926 Tudor, 1915 Runabout
Location: Prospect, Ohio

Re: Is this overkill?

Post by greenacres36 » Sun Dec 04, 2022 4:48 pm

Absolutely not overkill. I like it.

User avatar

mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Is this overkill?

Post by mbowen » Sun Dec 04, 2022 4:49 pm

Scott_Conger wrote:
Sun Dec 04, 2022 4:40 pm
use some imagination, Miles ;) :D :D
I’d rather just use a plastic drinking straw. Fortunately I live in a state where they’re still allowed…. :D
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 5:00 pm

the amazing thing is, with a micrometer, 6" screwdriver, or a plastic straw, the crank pin is horizontal in every case. That 'ol Henry was a genius. :lol:
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Is this overkill?

Post by Dan Hatch » Sun Dec 04, 2022 5:15 pm

Here is the manual.
C96A9F51-143D-44C7-B1DA-A8D7F1C9EA36.jpeg


Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Re: Is this overkill?

Post by browning » Sun Dec 04, 2022 5:31 pm

I’m thinking rev2 should have a whistle in the indicator shaft to announce compression!


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 5:54 pm

Rube would be proud!
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


BUSHMIKE
Posts: 337
Joined: Tue Nov 01, 2022 6:46 am
First Name: Mike
Last Name: Cushway
* REQUIRED* Type and Year of Model Ts owned: 1925 TT, 1926 TT, 1926 TT
Location: Trout Creek, MI
MTFCA Number: 52588

Re: Is this overkill?

Post by BUSHMIKE » Sun Dec 04, 2022 6:07 pm

They were commonly used on aircraft timing.


Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Re: Is this overkill?

Post by browning » Sun Dec 04, 2022 6:18 pm

I didn’t know Rube (my hero) was an aircraft mechanic.

User avatar

Mark Gregush
Posts: 4956
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Is this overkill?

Post by Mark Gregush » Sun Dec 04, 2022 8:14 pm

As long as it does not kickback when using the starter, moving the lever on the quadrant will render all the work moot. :twisted: The pulley pin when horizontal is top dead center from there turn 12-16 degrees to first impulse from the magneto (approx) for stem winders or just after the pistons rolls over TDC and just starts to drop for the rest of us mere mortals with electric starter. ;)
Nice work.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup


Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Re: Is this overkill?

Post by browning » Sun Dec 04, 2022 9:24 pm

Mark, I’m. Not the sharpest knife in the drawer and my eyes aren’t as good as they used to be so I find “horizontal” sort of an arbitrary value to time an engine by. I built this contraption in an hour or so and the cost was about ten bucks for material. It doesn’t show me approximately where TDC is, but precisely. I was joking about the whistle but found some on eBay for about two bucks each and am going to get some just for fun. The next step will be to get some magnetic strips printed to stick onto the crank pulley so I can align them at TDC, advance the spark fully, and check the “full advance” timing as well. I will have one strip for 3” pulley and another for 3 1/2”. I know it’s not necessary but it keeps me out of the bars and bingo halls.


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 9:38 pm

If you find horizontal (9-3) "arbitrary", you're going to absolutely love 15 degrees ATDC...(9:30-3:30)

That is where your timing is set at.

And don't get your panties in a wad over it being #1. Anytime the hand crank pin is horizontal, SOMEONE is at TDC and it doesn't matter who, as you continue to turn to 15 ATDC. That's where the timer, timer rod bending, and spark lever are all set to. Again...not TDC.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Re: Is this overkill?

Post by browning » Sun Dec 04, 2022 9:53 pm

It occurs to me that 15 degrees after TDC can’t be ascertained unless TDC can be confirmed. I’m just not as handy as you are so I need to provide myself with a helper. I guess I’m still a novice having only seven Model T’s for about thirty years, but I’m willing to learn.


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 10:01 pm

David

I'm not trying to be condescending!

For everyone else who may not have lots of experience on model "T"s: On a Model T engine, any time, the crank pin is horizontal, 1 piston is at TDC compression and 1 piston is at TDC exhaust. It doesn't matter which one it is, really. Scootch the engine a bit past TDC to 15 degrees past and SOME coil is going to buzz, and THAT's the cylinder that is just past TDC on compression. And at that setting, if SOMETHING isn't buzzing, then adjust the timer until it JUST does, and adjust your spark rod to make the timer attain that setting. And seriously, it is at 15 degrees past TDC where timing is set...not TDC. Even if you have just one Model T. Or seven.

15 degrees ATDC is the ideal/theoretical setting, but honestly, +/- 4 degrees or so from that setting isn't that big a deal...and is still perfectly safe to hand-crank. And +/- 4 degrees is easily discernable when shooting for 9:30-3:30...it will be obviously one way or the other, or just perfect at 9:30-3:30.
Last edited by Scott_Conger on Sun Dec 04, 2022 10:09 pm, edited 1 time in total.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Topic author
browning
Posts: 116
Joined: Wed Jan 22, 2020 4:34 pm
First Name: David
Last Name: Kahle
* REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
Location: Leeper, Pa.

Re: Is this overkill?

Post by browning » Sun Dec 04, 2022 10:06 pm

Scott, You don’t have to try to be condescending, it’s a gift. I know exactly what you are saying. By the way, I have twenty or thirty Fordson model F tractors and they time the same way.


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Is this overkill?

Post by Scott_Conger » Sun Dec 04, 2022 10:11 pm

David

wow.

with 30 or 40 tractors and 7 Model T's I'm surprised you're having this much trouble establishing what "horizontal" is. I honestly thought I'd be able to offer some help, but it is clear that I cannot, or at least you don't want it. Had I known I'd be bludgeoned with your immense count of vehicles, and the wealth of knowledge that apparently confers, I'd never have offered.

Good Evening.
Last edited by Scott_Conger on Sun Dec 04, 2022 10:23 pm, edited 1 time in total.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured

User avatar

Steve Jelf
Posts: 6463
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
MTFCA Number: 16175
MTFCI Number: 14758
Board Member Since: 2007
Contact:

Re: Is this overkill?

Post by Steve Jelf » Sun Dec 04, 2022 10:16 pm

For those preferring the clock analogy, at 15º past TDC Mickey's big hand is pointing between 3 and 4.
The inevitable often happens.
1915 Runabout
1923 Touring

User avatar

Mark Nunn
Posts: 1105
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
MTFCA Number: 50321
Board Member Since: 2017

Re: Is this overkill?

Post by Mark Nunn » Mon Dec 05, 2022 8:02 am

I made an offset tip for this dial that looks like the offset extensions in Dan Hatch's first photo. I used it to find TDC. Then I continued to turn the crank until the reading went down .087". That is 15 degrees. If you prefer to use the 15.5 degree method, the drop is .093". These measurements will only work with stock crank stroke and rod length.
TDC dial.gif
TDC timing.pdf
(11.49 KiB) Downloaded 22 times


Ron Patterson
Posts: 533
Joined: Sun Jan 06, 2019 12:32 pm
First Name: Ronald
Last Name: Patterson
Location: Petoskey, Michigan
MTFCA Life Member: YES
Board Member Since: 1999

Re: Is this overkill?

Post by Ron Patterson » Mon Dec 05, 2022 10:26 am

Twenty years ago Steve Coniff studied this and we wrote an article on the subject of "Model T Ford Ignition System and Spark Timing". See Attached.
When the Model T was first developed the 22.5 degree spacing between magneto current pulses created a bit of a dilemma for being able to start the engine on magneto and creating the appropriate spark advance (notches) for running over various engine speeds.
It is just a theory, but we concluded that the selection of setting the initial timing at 15.5 degrees ATDC was the compromise. If you advanced the spark lever 3-4 notches to start the engine as Ford instructed, you could easily start the engine on magneto with the first spark occurring on a current pulse at 4 degrees ATDC.
Further advancing the spark lever would allow sparks to occur at 18.5 degree BTDC and 41 degrees BTDC.
Take a look at figure 8 and think about it a bit?
Subsequently Tony Wiltshire created his clever initial timing adjusting tool which is not materially different the one in Browning's initial post.
Ron Patterson
Attachments
Model T Ignition System-Final Article.pdf
(388.82 KiB) Downloaded 70 times

User avatar

Mark Gregush
Posts: 4956
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Is this overkill?

Post by Mark Gregush » Mon Dec 05, 2022 10:43 am

You asked if it was over kill, we gave our opinions. ;)
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Is this overkill?

Post by TXGOAT2 » Mon Dec 05, 2022 10:47 am

I'd think free play, friction, and flex in the timer linkage, along with play in the timer mechanism, would stymie any attempt to get a truly precise initial setting. Timing gear lash could affect precision setting. I bring mine to TDC as indicated by the crank ratchet pin, then engage the crank and move the engine in the normal direction of rotation until the crankpin is at about 3:30. That seems to work well when starting on battery or magneto, hot or cold. I set the spark lever at full retard, or a notch or two down, when using the starter, and I set it about 1/4 way down when starting on magneto.


Ron Patterson
Posts: 533
Joined: Sun Jan 06, 2019 12:32 pm
First Name: Ronald
Last Name: Patterson
Location: Petoskey, Michigan
MTFCA Life Member: YES
Board Member Since: 1999

Re: Is this overkill?

Post by Ron Patterson » Mon Dec 05, 2022 11:49 am

In a properly restored Model T all those mysterious variables will not exist or significantly affect spark timing.
The balance is simply another way to accomplish the proper initial timing adjustment we wrote about in the article.
When any piston is set at 15 degrees ATDC the crank pins will be pointing exactly at 9:30 and 3.30 on the clock face.
When starting the engine on battery and the spark fully retarded the first spark will occur at 15 degrees ATDC followed by a constant stream of sparks controlled by the natural rhythm of the coil (approximately 400 cps) operating on battery so long as the timer is still in contact.
Conversely, when starting the engine on magneto with the spark lever advanced 3-4 notches the first spark will occur at 4 degrees ATDC followed by sparks occurring every 22.5 degrees of crankshaft travel.
See the first paragraph on our article
Ron Patterson

User avatar

dykker5502
Posts: 410
Joined: Mon Jan 07, 2019 7:01 pm
First Name: Michael
Last Name: Deichmann
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1921 Roadster P/U, 1922 Fordor (danish custom body)
Location: Rågeleje, Denmark
MTFCA Number: 29116
Board Member Since: 2007

Re: Is this overkill?

Post by dykker5502 » Tue Dec 06, 2022 5:15 am

When running on magneto, the position of the timer is not important for the precision of the ignition point as that is set by the position of the coils in the coilring. The timer just selects which 1 of the 16 ignition points are used to ignite the cylinder ready for that. So the play in the linkage are not that important to get a proper precise ignistion.
Running on battery is another story.
Ford Model T 1914 Touring
Ford Model T 1921 Roadster Pick-up
Ford Model T 1922 Fordor (danish build body)
ECCT, Strobospark, HCCT(Sold), Rebuilding coils

Post Reply Previous topicNext topic