Molded trunk?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
QGolden
Posts: 87
Joined: Sun Oct 10, 2021 1:53 am
First Name: Quinn
Last Name: Golden
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Dansville, NY
MTFCA Number: 51795

Molded trunk?

Post by QGolden » Mon Dec 05, 2022 6:28 am

Hello
Please review the two pictures attached. See how the trunk has been molded (bondo’d?) into the rear of the body?

It is not a fiberglass body. The body and trunk are both steel. Is it safe to presume that this is the result of an improper “restoration”?

Until I saw the same thing on a FB post today, this car is the only one I have seen like this and I plan to cut it apart and fix it this winter, but now seeing another one I thought I would check to see if I was missing something that I don’t know first.

Thank you in advance.
Attachments
DFDFB1BF-B3A3-4FFA-950D-05C878AD0186.png
E8685B76-2DD8-40AE-9CC7-70681A6006D3.jpeg

User avatar

Humblej
Posts: 1690
Joined: Sun Jan 06, 2019 12:23 pm
First Name: Jeff
Last Name: Humble
* REQUIRED* Type and Year of Model Ts owned: 1926 Canadian built coupe, 1924 TT C-cab, survivor 1924 roadster
Location: Charlevoix, Mi
MTFCA Number: 28034
Board Member Since: 2006

Re: Molded trunk?

Post by Humblej » Mon Dec 05, 2022 8:02 am

Wow, that's really cobbled up. No it should not be smoothed over at the seams. Looks like they cut off the flange for the wood trim along the top edge too.


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Molded trunk?

Post by Scott_Conger » Mon Dec 05, 2022 8:35 am

Quinn

If I were faced with this, I'd be inclined to contact the guy on Facebook and ask him if he'd like to own a pair of 'em, or leave it as is and accept it for what it is.

The amount of work I see involved to make this right would lead me to simply look for a better project. The horrors you are going to encounter would be more than I could personally bear.

I do wish you luck. It's not a lost cause if you have the talent and time, and the wallet for the parts you will need...but it is going to be a huge amount of work for little return.

The more you spend to initially buy the car, the cheaper it will cost in the end to make right.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Norman Kling
Posts: 4071
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: Molded trunk?

Post by Norman Kling » Mon Dec 05, 2022 9:17 am

If you have not bought it, DONT! It can be fixed, but would take a lot of work just to get it useable, unless you only want to drive it without the top. It would not ever be a show car, or even a good "unrestored" You would need to know how to cut and weld metal and completely paint the car. The upholstery is not correct either. If all the other parts are there, and running offer maybe 1,000 or less, or else, look for something better. I suspect someone had ideas of putting a big engine in it and making it into some type hybrid car.
Norm


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Molded trunk?

Post by TXGOAT2 » Mon Dec 05, 2022 9:59 am

The body is probably rat rod or perhaps speedster material.


Topic author
QGolden
Posts: 87
Joined: Sun Oct 10, 2021 1:53 am
First Name: Quinn
Last Name: Golden
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Dansville, NY
MTFCA Number: 51795

Re: Molded trunk?

Post by QGolden » Mon Dec 05, 2022 12:31 pm

Thank you for the replies. That is largely as I suspected.

It is mine, I bought it in spite of its obvious issues and lack of an interior. The seat covering looks like Draperies!

I do have welding/sheet metal skills and a Mig a welder. I also have another ‘26 trunk sans the lid and floor. It has had very little prior repairs. I also have Speedster seats and other related parts as I never intended to get close to original with it.

I also have a set of bed irons in stock and contemplated removing the trunk turning it into a pickup.

So I will think on it some more and do some closer inspection.

Maybe I will just pull the body and build a Speedster out of it.
It starts instantly and drives real nice.

Thanks again.

User avatar

BE_ZERO_BE
Posts: 541
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA
MTFCA Number: 16897
MTFCI Number: 16628

Re: Molded trunk?

Post by BE_ZERO_BE » Mon Dec 05, 2022 1:10 pm

This would be a great opportunity to spin a "creative yarn" on how it was custom made
back in the day for special lady that .... well, you get the idea. :lol:

If it runs and drives good, have fun with it.
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.


Adam
Posts: 1411
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Molded trunk?

Post by Adam » Fri Dec 09, 2022 2:26 pm

Maybe even the wrong trunk…


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Molded trunk?

Post by TXGOAT2 » Fri Dec 09, 2022 2:32 pm

Does anyone know of a good way to get the Bondo off? (Or is it White Star?)

User avatar

TRDxB2
Posts: 5410
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
Location: Moline IL
Board Member Since: 2018

Re: Molded trunk?

Post by TRDxB2 » Fri Dec 09, 2022 2:40 pm

TXGOAT2 wrote:
Fri Dec 09, 2022 2:32 pm
Does anyone know of a good way to get the Bondo off? (Or is it White Star?)
Several variations of using heat - suggest to look at a few before you decide https://www.google.com/search?client=fi ... ving+bondo.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger


Erik Johnson
Posts: 850
Joined: Mon Feb 04, 2019 10:25 pm
First Name: Erik
Last Name: Johnson
Location: Minneapolis, MN

Re: Molded trunk?

Post by Erik Johnson » Fri Dec 09, 2022 5:24 pm

Looks like a cut-off touring body that has been "married" to a trunk.


kmatt2
Posts: 558
Joined: Wed Jun 17, 2020 1:41 pm
First Name: Kevin
Last Name: Matthiesen
* REQUIRED* Type and Year of Model Ts owned: 26 T Coupe, 16 T Open Express, 21 TT Flatbed. 15 T Roadster, 13 & 25 T Speedster , 51 Mercury 4 door sport sedan, 67 Mercury Cougar
Location: Madera CA 93636
MTFCA Number: 11598

Re: Molded trunk?

Post by kmatt2 » Fri Dec 09, 2022 5:57 pm

Because you are thinking about going with a Model T speedster, before going to the trouble of removing the 26 roadster body, think about making it a 26 T Go-Job, as in a late 1930’s low bucks high school hot rod. A mildly worked T engine with high compression flat head and a bigger carburetor, maybe change to 1926 T wire wheels. You can get a hot rod chopped windshield, ( don’t chop a good windshield ) , a 2 1/2 inch drop axel and re-arched rear spring. You can go with or with out fenders depending the look you want.

Post Reply Previous topicNext topic