Want to change the pan on my '14 roadster. I have a 4 dip 26/27 pan to use. Will I have any issues with the exchange?
frontyboy.
Pan Replacement
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 1191
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Pan Replacement
No- it will interchange with any 3 dip pan with no issues. Just don't let Larry Smith see it! Paint it black so it does not show.................
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: Pan Replacement
In reading about pan's sound like the 3 dip pan is stronger than the 4 dip
Since the '26 has a wider brake drum then wouldn't the pan and then the hogs head as well. And then pedal locations. If you don't have to replace the hogs head then as Dan said it will work... https://mtfca.com/phpBB3/viewtopic.php?t=12749
Since the '26 has a wider brake drum then wouldn't the pan and then the hogs head as well. And then pedal locations. If you don't have to replace the hogs head then as Dan said it will work... https://mtfca.com/phpBB3/viewtopic.php?t=12749
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 1302
- Joined: Mon Jan 07, 2019 2:42 pm
- First Name: Frank
- Last Name: van Ekeren
- * REQUIRED* Type and Year of Model Ts owned: 1916 touring, 1916 pick-up, 1924 coupe, 1926 touring, 1927 touring
- Location: Rosedale Vic Australia
Re: Pan Replacement
I had a 4 dipper and a narrow nose pan that both had issues, so a cut and shut and now I have a 4 dipper with a narrow nose on my 16.