MTFCA Forum

Need some help does anyone in South Carolina or Georgia have a pan straightening table that repairs pans? Trying to help a member that lives in South Carolina close to the border of Ga around Augusta. Best John

John, it's not GA or SC, but Dan Hatch in Trussville, AL has pan straightening ability

Scott thanks, First person I thought about and relayed that information to the person needing some help but was hoping to find someone closer than a 10 hr round trip. It looks like, so far, the first thought was correct though. In the grand scope of things it’d be nice if members & guest had an idea of who builds complete engines & and other services. I suppose I know as others do several larger accomplished builders but smaller well equipped operations are less obvious. They actually may be much closer or even local. I’m fairly sure that most folks in the T model community can’t stomach the expense of shipping an engine round trip to the more well known builders. Might be wrong though. Thanks again John

JTT3 wrote: ↑

Tue Mar 14, 2023 2:51 pm

So now does anyone in South Carolina or Georgia have a pan straightening table that repairs pans? Trying to help a member that lives in South Carolina close to the boarder of Ga around Augusta. Best John

Have you tried "Gator Gould"?
gatorsts@frontiernet.net

John thanks for the reply, Gator is a good friend but the distance is an additional 2 hours more than to Dan’s location.
Very kind of you to put your thinking cap on to help out.
Best John