Aluminum Timing Gear

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
John_Aldrich
Posts: 90
Joined: Wed Mar 13, 2019 10:46 am
First Name: John
Last Name: Aldrich
* REQUIRED* Type and Year of Model Ts owned: 1915, 1923. 1927
Location: Kapowsin WA

Aluminum Timing Gear

Post by John_Aldrich » Thu Mar 23, 2023 3:24 pm

Anyone have issues with the aluminum timing gears?

Mine is noisy as all get out.
John Aldrich
Typical Model T Addict

User avatar

TWrenn
Posts: 3388
Joined: Sun Jan 06, 2019 10:53 am
First Name: Tim
Last Name: Wrenn
* REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
Location: Ohio
MTFCA Number: 30701
MTFCI Number: 24033
Board Member Since: 2019

Re: Aluminum Timing Gear

Post by TWrenn » Thu Mar 23, 2023 3:26 pm

Yep, they are. Horribly noisy. Get a brass one, they're a bit quieter.


Topic author
John_Aldrich
Posts: 90
Joined: Wed Mar 13, 2019 10:46 am
First Name: John
Last Name: Aldrich
* REQUIRED* Type and Year of Model Ts owned: 1915, 1923. 1927
Location: Kapowsin WA

Re: Aluminum Timing Gear

Post by John_Aldrich » Thu Mar 23, 2023 3:42 pm

TWrenn wrote:
Thu Mar 23, 2023 3:26 pm
Yep, they are. Horribly noisy. Get a brass one, they're a bit quieter.
How noisy are steel ones? I HAVE one of them.
John Aldrich
Typical Model T Addict


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Aluminum Timing Gear

Post by TXGOAT2 » Thu Mar 23, 2023 3:49 pm

They all make noise, with the possible exception of a fiber gear.
Your best bet is probably a quality bronze cam gear with a steel crankshaft gear. I'd buy the gears as a set.

Gear lash is critical for quietest operation, and issues with cams and cam bearings, cam and crankshaft end play, and loose main bearings will contribute to noise.

User avatar

Humblej
Posts: 1690
Joined: Sun Jan 06, 2019 12:23 pm
First Name: Jeff
Last Name: Humble
* REQUIRED* Type and Year of Model Ts owned: 1926 Canadian built coupe, 1924 TT C-cab, survivor 1924 roadster
Location: Charlevoix, Mi
MTFCA Number: 28034
Board Member Since: 2006

Re: Aluminum Timing Gear

Post by Humblej » Thu Mar 23, 2023 3:50 pm

Bronze is the wsy to go.


speedytinc
Posts: 3839
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
MTFCA Number: 14383
Board Member Since: 2020

Re: Aluminum Timing Gear

Post by speedytinc » Thu Mar 23, 2023 3:53 pm

In the past, the alloy used expanded greatly, so if you didnt set em up loose, they could ruin the front cam bearing. Very noisy cold.
I think the good latest generation are good. I believe one supplier is making from billet 7075. Not to say there are vendors selling a poor quality version.

I would trust Dan McEachern's aluminum gears. I would ask questions first about fit & noise.
I currently use Dan M's bronze gears. Best available IMO.

Original steel are great. IF you have a NOS set. They are fit really close. .002"
Used gears era typically too worn & will be noisy. I had run a set of early gears that had .005 clearance.
No regrets. A bit of noise, but, its a model T & my hearing isnt as young as it used to be.


Jerry VanOoteghem
Posts: 2948
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan
MTFCA Number: 24868

Re: Aluminum Timing Gear

Post by Jerry VanOoteghem » Thu Mar 23, 2023 4:02 pm

What is the condition of your crankshaft gear? No gear will run well against a worn crank gear.


Topic author
John_Aldrich
Posts: 90
Joined: Wed Mar 13, 2019 10:46 am
First Name: John
Last Name: Aldrich
* REQUIRED* Type and Year of Model Ts owned: 1915, 1923. 1927
Location: Kapowsin WA

Re: Aluminum Timing Gear

Post by John_Aldrich » Thu Mar 23, 2023 4:07 pm

Jerry VanOoteghem wrote:
Thu Mar 23, 2023 4:02 pm
What is the condition of your crankshaft gear? No gear will run well against a worn crank gear.
Not sure Jerry. Had the engine rebuilt several years ago and while it runs good it is just so darned noisy.
John Aldrich
Typical Model T Addict


Rich P. Bingham
Posts: 1376
Joined: Sun Feb 13, 2022 11:24 am
First Name: Rich
Last Name: Bingham
Location: Blackfoot, Idaho
Board Member Since: 2015

Re: Aluminum Timing Gear

Post by Rich P. Bingham » Thu Mar 23, 2023 4:08 pm

Eh ?? How's that ?!? You fellers can HEAR yer timing gears ? :D

(I'm deaf and I've quit worrying !! :lol: )

For my part, no issues with a Dan McEachern aliminium cam gear - replaced a "lettuce gear" (fiber that is) five years ago that was headed south.
Get a horse !


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Aluminum Timing Gear

Post by TXGOAT2 » Thu Mar 23, 2023 4:23 pm

I'd get a bronze/steel set, especially if running a generator. The generator and generator gear can make noise, too.

User avatar

George House
Posts: 2270
Joined: Sun Jan 06, 2019 5:25 pm
First Name: George
Last Name: House
* REQUIRED* Type and Year of Model Ts owned: ‘10 Maxwell AA, ‘11Hupp Model 20, Two 1914 Ford runabouts, 19 centerdoor, 25 C Cab,26 roadster
Location: Northern Caldwell County TX
MTFCA Number: 115
MTFCA Life Member: YES
Board Member Since: 1999

Re: Aluminum Timing Gear

Post by George House » Thu Mar 23, 2023 5:20 pm

I use a very quiet set of 09-18 spur timing gears in my ‘14. Even have a few extra really nice sets I’d sell. But if you’re running a generator, they won’t work. No kidding; I can’t hear them when the ‘14 is running 😁
Attachments
F4F48A5C-96AE-4DD5-8EB1-5E6DF360F3BA.jpeg
I don’t know why I turned out this way. My parents were decent people 🤪


John kuehn
Posts: 3907
Joined: Sun Jan 06, 2019 8:00 pm
First Name: John
Last Name: Kuehn
* REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
Location: Texas
MTFCA Number: 28924

Re: Aluminum Timing Gear

Post by John kuehn » Thu Mar 23, 2023 6:02 pm

I have an aluminum gear in my car and it is a bit noisy but not real bad.

A question would be WHY isn’t the original steel gear reproduced. Cost prohibitive? If the steel crank gear why not the steel timing gear???


speedytinc
Posts: 3839
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
MTFCA Number: 14383
Board Member Since: 2020

Re: Aluminum Timing Gear

Post by speedytinc » Thu Mar 23, 2023 6:25 pm

John kuehn wrote:
Thu Mar 23, 2023 6:02 pm
I have an aluminum gear in my car and it is a bit noisy but not real bad.

A question would be WHY isn’t the original steel gear reproduced. Cost prohibitive? If the steel crank gear why not the steel timing gear???
Your question is valid. Thats a good question for Dan M.
From a machining stand point, I would much rather carve on softer material than steel.

Timing gear is cast iron.
The neat thing is that it expands @ the same rate as the block, so the clearance can be tight, which = quiet & wears like iron :D
I understand that Bronze has a small expansion coefficient, so its a best substitute.
Aluminum, depending on the alloy has a larger expansion coefficient.


John kuehn
Posts: 3907
Joined: Sun Jan 06, 2019 8:00 pm
First Name: John
Last Name: Kuehn
* REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
Location: Texas
MTFCA Number: 28924

Re: Aluminum Timing Gear

Post by John kuehn » Thu Mar 23, 2023 8:11 pm

From what I’ve sort of understood over the years that Aluminum, Bronze is easier to work with. For years the fiber gears were used and sold by the after market folks. So machining seems to be the issue with a cast or steel timing gear?
If new transmission drums can be had and not real cheap but people do buy them. I would think a timing gear can be made about the same cost as a transmission drum. But I’m not a machinist and there may be more to it that I can understand.

User avatar

John.Zibell
Posts: 307
Joined: Mon Jan 07, 2019 9:09 am
First Name: John
Last Name: Zibell
* REQUIRED* Type and Year of Model Ts owned: 1926 Tudor
Location: Huntsville, AL
MTFCA Number: 30265
MTFCI Number: 24046

Re: Aluminum Timing Gear

Post by John.Zibell » Thu Mar 23, 2023 8:39 pm

TXGOAT2 wrote:
Thu Mar 23, 2023 3:49 pm
Gear lash is critical for quietest operation, and issues with cams and cam bearings, cam and crankshaft end play, and loose main bearings will contribute to noise.
Very true. I'm running a bronze gear with a generator. Had to use an extra gasket under the generator bracket to get an acceptable gear lash.
1926 Tudor


Dan McEachern
Posts: 1180
Joined: Sun Jan 06, 2019 11:08 am
First Name: DAN
Last Name: MCEACHERN
* REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
Location: ALAMEDA,CA,USA

Re: Aluminum Timing Gear

Post by Dan McEachern » Fri Mar 24, 2023 12:04 am

Guys- if you have an aluminum or bronze timing gear and its making noises, something is wrong. Its an old wives tale that metal gears all make noise. If you ever purchase one of my gears and they make noise, contact me and lets figure out what the problem is. If you buy my gears- both crank and cam (and generator gear) you will have my full support regarding any issues. I would love to sell my timing gears for the same price as a transmission drum but I'm not that smart! We've been making aluminum and bronze cam gears since about 1985 so there are quite a few out there. A quiet gear is not about throwing money at it- its about accurately cut teeth of the proper size. Yes, aluminum machines differently than bronze and both machine differently than steel, but its not rocket science to know how to process different materials.
When installing a set of gears you should ALWAYS check for proper backlash- .004"-.006 is our house standard for both T and A engines- either bronze or aluminum. I get numerous calls regarding insufficient backlash- yes, your engine guy blew it on the cam to crank center distance when lineboring the mains or your bearings are so worn the crank is sitting too high in the block. I try to have undersize gears in stock for these situations.

Hope this helps a bit.

User avatar

Craig Leach
Posts: 1436
Joined: Tue Jan 08, 2019 12:22 am
First Name: craig
Last Name: leach
* REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
Location: Laveen Az
MTFCA Number: 26647

Re: Aluminum Timing Gear

Post by Craig Leach » Fri Mar 24, 2023 2:10 am

With all the noises a T engine makes I'm imprest that anyone can hear a cam gear noise? I'm thinking something else is going on here. Dans gears
are the only ones I will use and I have a set in stock all the time. If you have that much noise I would check the gear clearance. A whine is to tight
a rattle is to loose. A knock is cam end spacing.
Craig.


Nv Bob
Posts: 777
Joined: Mon Jan 07, 2019 11:04 pm
First Name: Bob
Last Name: Middleton
* REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
Location: Western nv

Re: Aluminum Timing Gear

Post by Nv Bob » Fri Mar 24, 2023 10:52 pm

They all make noise but check the lash and crank gear
And change to spiral gears
Bronze/ steel best combo


J1MGOLDEN
Posts: 944
Joined: Sun Jan 06, 2019 5:39 pm
First Name: James
Last Name: Golden
* REQUIRED* Type and Year of Model Ts owned: 1926 Model T Roadster
Location: Bowie, MD
MTFCA Number: 14294
MTFCI Number: 13562

Re: Aluminum Timing Gear

Post by J1MGOLDEN » Sat Mar 25, 2023 1:01 pm

There was a good reason for Ford to change to the slanted teeth timing gears.

The slant provides a constant mesh of the teeth and a much quieter timing gear set.


Sarikatime
Posts: 622
Joined: Sun Jan 06, 2019 12:47 pm
First Name: Frank
Last Name: Seress
* REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
Location: Prescott, Arizona
MTFCA Number: 27707

Re: Aluminum Timing Gear

Post by Sarikatime » Sat Mar 25, 2023 1:27 pm

I have a newly rebuilt motor with an aluminum timing gear and it is annoyingly noisy. The crazy part is it will make a lot of winding racket, then stop for a while and make close to the same later. I thought it was my transmission triple gears at first, newly rebuilt along with the motor, but after investigating the noise the triple gears are tight. Been tempted to trade it out but it is not causing a problem, runs good, so going to leave it.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Aluminum Timing Gear

Post by TXGOAT2 » Sat Mar 25, 2023 3:25 pm

If you are using a generator, it's possible the noise is the generator drive gear, and it may get louder when the generator is working hard. When the generator is charging at a higher rate, it is harder to turn, and the increased load may affect the sound of the entire gear train.

The gear lash may change slightly when the engine is warmed up as compared to cold. That might affect the gear noise.


John kuehn
Posts: 3907
Joined: Sun Jan 06, 2019 8:00 pm
First Name: John
Last Name: Kuehn
* REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
Location: Texas
MTFCA Number: 28924

Re: Aluminum Timing Gear

Post by John kuehn » Sat Mar 25, 2023 3:59 pm

It would be really interesting to hear a Model T coming off the assembly line in the 20’s and what they sounded like. I wonder if any audio has survived but even if it did it wouldn’t be accurate. As fast as they were moving off the line I would think if for the most part they sounded alike they were OK. BUT how quiet were they in reality compared to todays engines.


Norman Kling
Posts: 4068
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: Aluminum Timing Gear

Post by Norman Kling » Sat Mar 25, 2023 4:09 pm

I have been running aluminum gears on my T's and not very noisy. My hearing is quite good. I can hear my wife and son talking 2 rooms away with the doors open. They are about 40 feet away. Sometimes even hear neighbors talking. The next house is about 200' away. I would NOT use a fiber gear especially with a generator. Fiber has a reputation for breaking and leaving you stranded.
Norm

Post Reply Previous topicNext topic