MTFCA Forum

install advice.
please, jim

Jim ,,, Haven't received mine yet.... would start by disconnecting the POSITIVE battery cable first.

Jim, you ordered a Cutout!!! So that’s what I sent you! I had enough test cutout metal parts to fulfill all the Cutout orders I got.

Perhaps I should make it even more clear in the order site that the diode cutouts are not Voltage Regulators…

If you meant to order a regulator, send me email to jeff @ modeltstarters.com and we’ll figure something out.

I have 2 pages of very detailed installation instructions that will ship with the voltage regulators.

Here’s where I am with the Voltage Regulators.

https://www.mtfca.com/phpBB3/viewtopic. ... 55#p296865

Almost there !

Jeff

Moxie26 wrote: ↑

Fri Sep 01, 2023 5:30 pm

Jim ,,, Haven't received mine yet.... would start by disconnecting the POSITIVE battery cable first.

Trust me, that specific advice is repeated over and over in the instructions!!!

Jeff

i want a regulator not cutout, thought that's what ordered! I'll return the cutout. What do I owe you? when will REGULATORS
REALLY BE AVAILABLE?

JimDix wrote: ↑

Sat Sep 02, 2023 8:27 am

i want a regulator not cutout, thought that's what ordered! I'll return the cutout. What do I owe you? when will REGULATORS
REALLY BE AVAILABLE?

https://www.mtfca.com/phpBB3/viewtopic. ... 55#p296865

Im working as fast as I can. Things like zinc plating just can't be rushed. It's done when it says it's done. I'll very likely ship the first 50 of them by next Wed or Thu.

Jeff