Page 1 of 1

Need help identifying these side lights please

Posted: Sat Sep 30, 2023 2:20 pm
by JTT3
Really nice pair of side lamps but I can’t find a brand on them.
Thanks in advance for your help.

Re: Need help identifying these side lights please

Posted: Sat Sep 30, 2023 6:59 pm
by George House
John, could they be proprietary to a specific marque therefore not having a maker’s mark ? They look exactly like a pair I sold many years ago at Chickasha to a very excited man saying he’d been searching for years to hang them on his ‘20-something Cadillac. I even had a nail holding one rim on. But the lights I sold had bulbs with long and centered ‘tits’.

Re: Need help identifying these side lights please

Posted: Sat Sep 30, 2023 7:14 pm
by JTT3
Well there is a nail in one of the hinges, wonder if these are them? Helping someone out trying to clear out stuff after a death. They are striking & well made. Maybe you need them back ha. Thanks George

Re: Need help identifying these side lights please

Posted: Sat Sep 30, 2023 8:01 pm
by Rich Eagle
1914 Overland used some about that size and shape. I can't be sure.
Rich

Re: Need help identifying these side lights please

Posted: Sun Oct 01, 2023 12:44 am
by TRDxB2
Some lens have a manufacture's name on the edge of the lens. Have you looked?
--
--
Some pictures of a 1914 Overland's side lights. The shaped looked good : hinge, socket & bracket location. But the profile shot. shot shows a more elongated bucket. The mounting is also different. Still could be an Overland but different year

Re: Need help identifying these side lights please

Posted: Sun Oct 01, 2023 10:14 am
by JTT3
Frank maybe you’re right they look very close. Thanks for your contribution. Best John

Re: Need help identifying these side lights please

Posted: Sun Oct 01, 2023 12:33 pm
by pre15dale
Brackets are the same as 1909 two cylinder Reo. John if you want to sell the brackets I am interested

Re: Need help identifying these side lights please

Posted: Fri Oct 06, 2023 12:32 pm
by George House
I’ve given our Forum Friend Dale first shot at this single bracket,…..In case hes not interested, does anyone else need it ? There’s 3” c/c bolt mounting holes.