Page 1 of 1
Roof wood 1926 fordoor
Posted: Tue Oct 03, 2023 5:53 pm
by Tekirgis
I have a 1926 fordoor that I purchased recently that is in bad shape and is missing roof wood and also the belt line at the back.So I don’t know exactly how to make the pieces since they are not there for a pattern.. I know that I can buy these from a couple of sources but would prefer to make myself. Does anyone know if there are drawings available?
Re: Roof wood 1926 fordoor
Posted: Tue Oct 03, 2023 6:59 pm
by Rich Eagle
Re: Roof wood 1926 fordoor
Posted: Wed Oct 04, 2023 3:21 am
by Tekirgis
Thanks Rich
Re: Roof wood 1926 fordoor
Posted: Fri Oct 13, 2023 5:58 am
by FordorGalore
Some pic's....
Re: Roof wood 1926 fordoor
Posted: Fri Oct 13, 2023 7:46 am
by FordorGalore
Some more...
Re: Roof wood 1926 fordoor
Posted: Fri Oct 13, 2023 5:11 pm
by Tekirgis
Thanks . That is quite helpful
Re: Roof wood 1926 fordoor
Posted: Wed Jan 31, 2024 2:30 pm
by Tekirgis
The roof profile that you sent is different from my car in that yours is 1.5” thick and what I have is just 1” . Also yours has a rounded relief edge on the outside bottom where the body panels would tack on . Mine does not have that detail. Does having that detail allow for better rain protection? I am about to tackle the roof and wanting to do it correctly. My car is a 1926 fordoor.
Any advice is appreciated
